QPA0363APCK401 [QORVO]
DC â 5000 MHz Cascadable SiGe HBT Amplifier;型号: | QPA0363APCK401 |
厂家: | Qorvo |
描述: | DC â 5000 MHz Cascadable SiGe HBT Amplifier |
文件: | 总7页 (文件大小:880K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QPA0363A
DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier
®
Product Overview
The QPA0363A is a high performance SiGe HBT MMIC
amplifier. A Darlington configuration provides high FT and
excellent thermal performance. The heterojunction
increases breakdown voltage and minimizes leakage
current between junctions. Cancellation of emitter junction
non-linearities results in higher suppression of
intermodulation products.
6 Lead SOT-363 Package
The QPA0363A may be operated from a variety of supply
voltages by using a voltage dropping resistor. Two DC-
blocking capacitors, bypass capacitors and an optional RF
choke complete the circuit required for operation of this
internally matched 50 ohm device.
Key Features
DC to 5000ꢀMHz Operation
Single Positive Voltage Supply
Low Current Draw: 11ꢀmA at +5ꢀV Supply
Output IP3: +20ꢀdBm typical at 1950ꢀMHz
Noise Figure: 2.85ꢀdB Typical at 1950ꢀMHz
Robust 1000ꢀV Class 1C HBM ESD Rating
Lead-free/RoHS-compliant SOT-363 Package
The QPA0363A is assembled in an industry standard SOT-
363 package that is lead-free and RoHS-compliant.
Functional Block Diagram
Applications
Cellular, PCS, GSM, UMTS
PA Driver Amplifier
IF/RF Buffer Amplifier
Wireless Data, Satellite
Top View
Ordering Information
Part No.
Description
QPA0363ASQ
QPA0363ASR
QPA0363ATR7
25 Piece Sample Bag
100 Pieces on 7” Reel
3000 pieces on a 7” reel
QPA0363APCK401 850ꢀMHz, EVB with 5 Piece Sample Bag
Data Sheet Nov. 1, 2016 | Subject to change without notice
1 of 7
www.qorvo.com
QPA0363A
®
DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
−55 to +150ꢁ°C
+4 V
Parameter
Min
Typ
Max Units
Storage Temp
Operating Temperature
Junction Temperature (TJ)
−40
+105
+125
°C
°C
Device Voltage (VD)
Device Current (ID)
RF Input Power (ZL = 50ꢀΩ)
Electrical specifications are measured at specified test conditions.
Specifications are not guaranteed over all recommended operating
conditions.
22 mA
−5ꢀdBm
Exceeding any one or a combination of the Absolute Maximum Rating
conditions may cause permanent damage to the device. Extended
application of Absolute Maximum Rating conditions to the device may
reduce device reliability.
Bias Conditions should also satisfy the following expression:
ID x VD < (TJUNCTION -TLEAD) / RTH
Electrical Specifications
Parameter
Conditions
Min
Typ
19.3
16.9
15.7
+1.0
+1.7
+1.7
+16.3
+17.5
+20.0
+19.0
+16.5
17.5
21.2
20.8
2.60
2.85
+2.5
11
Max
Units
850ꢀMHz
1950ꢀMHz
2400ꢀMHz
850ꢀMHz
1950ꢀMHz
2400ꢀMHz
500ꢀMHz
850ꢀMHz
1950ꢀMHz
2400ꢀMHz
3500ꢀMHz
1950ꢀMHz
1950ꢀMHz
1950ꢀMHz
850ꢀMHz
1950ꢀMHz
Small Signal Gain
dB
Output Power at 1dB Compression
Output Third Intercept Point
dBm
dBm
Input Return Loss, |S11|
Output Return Loss, |S22|
Reverse Isolation, |S12|
dB
dB
dB
Noise Figure
dB
Device Operating Voltage
Device Operating Current
Thermal Resistance
Notes:
V
mA
123
°C/W
1. Test conditions unless otherwise noted: VS=+5ꢀV, RBIAS = 220ꢀΩ ID=11ꢀmA Typ., OIP3 Tone Spacing=1ꢀMHz, POUT per tone = -12ꢀdBm, 50ꢀΩ
system, Temp.ꢀ=ꢀ+25ꢀ°C.
Data Sheet Nov. 1, 2016 | Subject to change without notice
2 of 7
www.qorvo.com
QPA0363A
®
DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier
Performance Plotsꢀ –ꢀ 850 MHz Application Circuit
Test conditions unless otherwise noted: VS = +5.0 V, ID = 11ꢀmA
Data Sheet Nov. 1, 2016 | Subject to change without notice
3 of 7
www.qorvo.com
QPA0363A
®
DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier
Evaluation Board and Schematicꢀ –ꢀ 850 MHz Application Circuit
Bill of Materialꢀ –ꢀ 850 MHz Application Circuit
Reference Value Description
Manufacturer
Qorvo
Part Number
n/a
n/a
PCB
QPAXX63X-410(A)
QPA0363A
U1
n/a
HBT MMIC Amplifier
Qorvo
C1
1ꢀuF
CAP, 10%, 25V, X7R, 1206
CAP, 10%, 50V, X7R, 0402
CAP, 5%, 50V, C0G, 0402
CAP, 5%, 50V, C0G, 0402
RES, 220 Ω, 5%, 1/2W, 1210
IND, 5%, M/L, 0603
Murata Electronics
Murata Electronics
Murata Electronics
Murata Electronics
GRM31MR71E105KA01L
GRM155R71H102KA01D
GRM1555C1H680JA01D
GRM1555C1H101JA01D
C2
1000 pF
68 pF
100 pF
220 Ω
33 nH
n/a
C3
C4, C5
R1
Panasonic Industrial Devices ERJ-14YJ221U
L1
Murata Electronics
Amphenol RF Asia Corp
Samtec Inc
LL1608-FSL33NJ
901-10426
J1, J2
P1
CONN, SMA, EL, FLT, 0.068" SPE-000318
CONN, HDR, ST, 1x2, 0.100", Hi-temp, T/H
n/a
HTSW-102-07-G-S
Component Values for Specific Frequencies
Reference Designator
500 MHz
220 pF
100 pF
68 nH
850 MHz
100 pF
68 pF
1950 MHz
68 pF
2400 MHz
3500 MHz
39 pF
C4, C5
C3
56 pF
22 pF
18 nH
22 pF
15 pF
L1
33 nH
22 nH
15 nH
Bias Resistor Values for Specific Supply Voltages
Reference Designator
R1 ( Rbias) (1,ꢀ2)
Notes:
VS=+5 V
VS=+7.5 V
VS=+9 V
620 Ω
VS=+12 V
220 Ω
470 Ω
910 Ω
1. Bias resistor improves current stability over temperature
2. Bias Resistance = RBIAS + RLDC = ( VS -VD ) / ID
Data Sheet Nov. 1, 2016 | Subject to change without notice
4 of 7
www.qorvo.com
QPA0363A
®
DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier
Pin Configuration and Description
Top View
Pad No.
Label
Description
Connection to ground. Use via holes in PCB for best performance to reduce lead inductance as close to
ground leads as possible
1, 2, 4, 5
GND
RF Input Pin. DC voltage is present on this pin therefore this pin requires the use of an external DC
blocking capacitor chosen for the frequency of operation.
3
6
RFIN
RF Output and Bias Pin. DC voltage is present on this pin therefore this pin requires the use of an
external DC blocking capacitor chosen for the frequency of operation.
RFOUT/Bias
Package Marking
XXXX is an Alpha-numeric trace code.
Data Sheet Nov. 1, 2016 | Subject to change without notice
5 of 7
www.qorvo.com
QPA0363A
®
DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier
Package Dimensions
Notes:
1. All dimensions are in inches (millimeters). Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.5-2009.
PCB Mounting Pattern
Data Sheet Nov. 1, 2016 | Subject to change without notice
6 of 7
www.qorvo.com
QPA0363A
®
DCꢀ–ꢀ5000ꢀMHz Cascadable SiGe HBT Amplifier
Handling Precautions
Parameter
Rating
Standard
ESDꢀ–ꢀHuman Body Model (HBM)
Class 1C
ESDAꢁ/ꢁJEDEC JS-001-2014
ESDA / JEDEC JS-002-2014
IPC/JEDEC J-STD-020
Caution!
ESD-Sensitive Device
ESDꢀ–ꢀCharged Device Model (CDM) Class C3
MSLꢀ–ꢀMoisture Sensitivity Level
Level 1
Solderability
Compatible with lead-free (260°C max. reflow temp.) soldering process.
Solder profiles available upon request.
Contact plating: Matte Sn
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
Pb
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information: Email: sjcapplications.engineering@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Data Sheet Nov. 1, 2016 | Subject to change without notice
7 of 7
www.qorvo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明