PG2110.151HLT [PULSE]
SMT Power Inductors;型号: | PG2110.151HLT |
厂家: | PULSE A TECHNITROL COMPANY |
描述: | SMT Power Inductors |
文件: | 总4页 (文件大小:1243K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMT Power Inductors
Power Beads - PG2110.XXXHLT Series
Current Rating: Over 75Apk
Inductance Range: 100nH to 180nH
Height: 8mm Max
Footprint: 8mm x 5mm Max
Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C 7
Saturation Current5
(A TYP)
Inductance1
@ 0ADC
Inductance2
@Irated
Irated3
DCR4
Heating Current6
(A TYP)
Part
Number
(ADC)
(mΩ ± 10%)
(nH +/- 15%)
(nH TYP)
25°C
100°C
60
PG2110.101HLT
PG2110.121HLT
PG2110.151HLT
PG2110.181HLT
100
120
150
180
53
53
50
41
75
61
50
41
49
40
32
0.22
53
105
126
NOTES:
1. Inductance measured at 100kHz, 100mVrms.
7. In high volt*time applications, additional heating in the component can occur due
to core losses in the inductor which may neccessitate derating the current in order
to limit the temperature rise of the component. To determine the approximate total
losses (or temperature rise) for a given application, the coreloss and temperature rise
curves can be used.
2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.
3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat-
ing current depending on which value is lower.
2.
4. The nominal DCR is measured at point
drawing.
, as shown below on the mechanical
8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to
industry standard tape and reel specification EIA-481.
5. The saturation current is the typical current which causes the inductance to drop by
20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by
placing the component in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating effects) to the component.
6. The heating current is the DC current which causes the part temperature to increase by
approximately 40°C when used in a typical application.
The tape and reel for this product has a width (W=24mm), pitch (Po=12mm) and depth
(Ko=8.1mm). Samples of these parts can be ordered by removing the HLT suffix and
replacing with HL.
9. The temperature of the component (ambient plus temperature rise) must be within
the stated operating temperature range.
Schematic
Mechanical
PG2110.XXXHLT
8.5
2.5
2.5
SUGGESTED LAND PAT TERN
8.0 MAX
1
2
PG2110.XXXHL
5.0 MAX
DATE CODE Co.O
Weight:
2.74grms
Tape & Reel: 500/Reel
Dimensions: mm
8.0 MAX
Unless otherwise specified,
all tolerances are 0.25
d
0.10
2 SURFACES
2.0 REF
3.4 REF
PulseElectronics.com
P908.A (04/21)
1
SMT Power Inductors
Power Beads - PG2110.XXXHLT Series
TAPE & REEL INFO
SURFACE MOUNTING TYPE, REEL/TAPE LIST
TAPE SIZE
(mm)
W 0.30 A0 0.1 B0 0.1 K0 0.1 PCS/REEL
24.0 5.1 8.1 8.1 500
REEL SIZE (mm)
QTY
TYPE
PG2110.XXXHLT
PulseElectronics.com
P908.A (04/21)
2
SMT Power Inductors
Power Beads - PG2110.XXXHLT Series
PG2110.XXXHLT, L vs I, Curve 25C
PG2110.XXXHLT, L vs I, Curve 100C
PulseElectronics.com
P908.A (04/21)
3
SMT Power Inductors
Power Beads - PG2110.XXXHLT Series
PG2110.XXHLT CoreLoss (W)
PG2110.XXXHLT Temp Rise vs Power Dissipation
For More Information:
Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2021. Pulse Electronics, Inc. All rights reserved.
PulseElectronics.com
P908.A (04/21)
4
相关型号:
©2020 ICPDF网 联系我们和版权申明