PE-1008CD272GTT [PULSE]
Wire Wound;型号: | PE-1008CD272GTT |
厂家: | PULSE A TECHNITROL COMPANY |
描述: | Wire Wound |
文件: | 总5页 (文件大小:1064K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RF Chip Inductors
Wire Wound - 1008 Series
For M ore Inform ation Please Visit: Netw orking.PulseElectronics.com
WIRE WOUND RF CHIP INDUCTORS
1008CD SERIES
Wire wound ceramic core construction
High Q values
High self resonant frequency
Temperature Range -40oC to +125oC
Industry 1008(2520) size and surface
mount land pattern
100% TinSolder Termination
Electrical Specifications @ 25°C - Operating Temperature Range -40 oC to +125oC
Part Number
Inductance1
Q 2
SRF 3
RDC 4
IDC 5
(nH)
(MIN)
(MHz MIN)
(Ω MAX)
(mA MAX)
Tolerance +/-2%
1000
1000
1000
0.09
0.09
0.11
10 @ 50MHz
12 @ 50MHz
17, 8 @ 50MHz
50 @ 500MHz
50 @ 500MHz
50 @ 350MHz
4100.0
3300.0
2500.0
PE-1008CD100GTT
PE-1008CD120GTT
PE-1008CD180GTT
1000
1000
1000
1000
1000
1000
1000
1000
650
0.12
0.11
0.14
0.12
0.08
0.09
0.07
0.14
0.15
0.63
0.16
0.77
0.84
0.91
1.05
1.12
1.19
1.33
1.47
1.61
PE-1008CD220GTT
PE-1008CD270GTT
22 @ 50MHz
27 @ 50MHz
33 @ 50MHz
39 @ 50MHz
47 @ 50MHz
56 @ 50MHz
68 @ 50MHz
82 @ 50MHz
100 @ 25MHz
120 @ 25MHz
150 @ 25MHz
180 @ 25MHz
220 @ 25MHz
270 @ 25MHz
330 @ 25MHz
390 @ 25MHz
470 @ 25MHz
560 @ 25MHz
680 @ 25MHz
820 @ 25MHz
55 @ 350MHz
55 @ 350MHz
60 @ 350MHz
60 @ 350MHz
65 @ 350MHz
65 @ 350MHz
1800.0
1500.0
1600.0
1400.0
1200.0
1160.0
1100.0
950.0
900.0
950.0
625.0
650.0
625.0
525.0
500.0
475.0
450.0
415.0
375.0
350.0
PE-1008CD330GTT
PE-1008CD390GTT
PE-1008CD470GTT
PE-1008CD560GTT
PE-1008CD680GTT
PE-1008CD820GTT
PE-1008CD101GTT
PE-1008CD121GTT
PE-1008CD151GTT
PE-1008CD181GTT
PE-1008CD221GTT
PE-1008CD271GTT
PE-1008CD331GTT
PE-1008CD391GTT
PE-1008CD471GTT
PE-1008CD561GTT
PE-1008CD681GTT
PE-1008CD821GTT
65 @ 350MHz
60 @ 350MHz
60 @ 350MHz
60 @ 350MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 350MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
45 @ 100MHz
650
580
620
500
500
450
470
420
310
230
180
(Continued on next page)
www.networking.pulseelectronics.com
WC711.C (7/19)
2
WIRE WOUND RF CHIP INDUCTORS
1008CD SERIES
Electrical Specifications @ 25°C - Operating Temperature Range -40oC to +125oC (continued)
Inductance1
Q 2
SRF 3
RDC 4
IDC 5
Part Number
Tolerance +/-2%
(nH)
(MIN)
(MHz MIN)
(Ω MAX)
(mA MAX)
1000 @ 25MHz
1200 @ 7.9MHz
1500 @ 7.9MHz
1800 @ 7.9MHz
2200 @ 7.9MHz
2700 @ 7.9MHz
3300 @ 7.9MHz
35 @ 50MHz
35 @ 50MHz
28 @ 50MHz
28 @ 50MHz
28 @ 50MHz
22 @ 50MHz
22 @ 25MHz
260.0
250.0
200.0
160.0
80.0
1.90
2.00
2.30
2.60
2.80
3.20
120
310
330
300
280
290
PE-1008CD102GTT
PE-1008CD122GTT
PE-1008CD152GTT
PE-1008CD182GTT
PE-1008CD222GTT
PE-1008CD272GTT
PE-1008CD332GTT
90.0
40.0
3.40
290
Notes:
3. SRF measured using a HP8753C Network Analyzer.
4. RDC measured using a Valhalla Scientific model 4100 ATC Digital Ohmeter.
5. Based on a 15�C maximum temperature rise,
1. Inductance measured using a HP4286A RF Impedance Analyzer. (Please note that inductance information
is not stamped on part, because of the extremely small size).
2. Q measured using a HP4291A RF Impedance Analyzer with a HP16193A Test Fixture
Typical Q vs Frequency
Typical Inductance vs Frequency
Mechanical
Unless otherwise specified,
Inches
mm
Weight ..................0.032gram
Dimensions:
.010
0,25
all tolerances are
www.networking.pulseelectronics.com
WC711.C (7/19)
3
WIRE WOUND RF CHIP INDUCTORS
perFormanCe testing
Electrical Testing
Storage and Operating
Temperature Range:
Inductors are subjected to the extremes
for 48 hours.
There shall be no deformation or change in
appearance
Then tested at 25 oC
-40oC to +125oC
Inductors are subjected to 30 cycles for 30 minutes
at each extreme.
Inductance shall not change by more than
±5%
Thermal:
Then tested at 25 oC
-40oC to +85oC
Q values shall not change by more than
±10%
Inductors are subjected to
10 cycles of 24 hours at 70 oC with 90 to 95% Relative
Humidity
Moisture Resistance
Then tested at 24 oC
Inductors are subjected to 1000 hours at 85 oC
with 85% Relative Humidity with the rated
current applied
There shall be no Damaged, Open or
Shorted Windings
Operating Life
Mechanical Testing
There shall be no deformation or change in
appearance
Inductors are subjected to the following: Use a solder pot at
260 oC, with RMA Flux. Each termination is immersed in
63Sn/37Pb molten solder for 4 to 6 seconds.
Temperature Range:
Inductance shall not change by more than ±5%
Q values shall not change by more than ±10%
Recommended Solder Heat
Resistance Profile
www.networking.pulseelectronics.com
WC711.C (7/19)
4
WIRE WOUND RF CHIP INDUCTORS
perFormanCe testing
Physical Specifications
Samplers are subjected to random vibrations as
per NAVMAT P9492
There shall be no deformation or change in
appearance
Vibration (Random)
Mechanical Shock
Inductance shall not change by more than
±5%
Inductors are subjected to one half sine wave pulse
(8700 g's for 0.3ms) in each directional axis for a total of
18 shocks
Q values shall not change by more than ±10%
Reflow Inductors on to test pads using 63
Sn/37 Pb solder paste (IR Reflow profile :
200 oC for 30 seconds or
The inductors shall withstand a minimum
force of 1000 g's in any direction using a
dynamometer force guage.
Moisture Resistance
peak 235 oC for 20 seconds)
Tape and Reel Specifications
Packing Moisture Level = MSL 1 - Storage Temperature - 40oC to +125oC
Tape Dimensions (mm)
Reels Dimensions (mm)
Parts per
Series
Reel
A
B
C
D
E
W
P1
H
T
P2
P3
PE-1008CD
1600
178
50
13
14.4
8.4
8
2
4
4
2.6
0.3
Notes: P1, P2 and P3 are same for all chip inductor series. Keeping the same dimensions for guide hole and pocket pitch (P1), pocket pitch (P2), guide hold pitch (P3) and tape width (8mm) for all series, enables the
packaging machine to maintain the same settings while changing models. The only difference between the series are the parts per reel which contributes to a different length of tapes/reel per model.
www.networking.pulseelectronics.com
WC711.C (7/19)
5
相关型号:
©2020 ICPDF网 联系我们和版权申明