P2040CG-08ST [PULSECORE]
LCD Panel EMI Reduction IC; 液晶面板降低EMI IC型号: | P2040CG-08ST |
厂家: | PulseCore Semiconductor |
描述: | LCD Panel EMI Reduction IC |
文件: | 总9页 (文件大小:156K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
November 2006
rev 1.6
P2040C
LCD Panel EMI Reduction IC
Features
system wide reduction of EMI of all clock dependent
signals. The P2040C allows significant system cost
savings by reducing the number of circuit board layers and
shielding that are traditionally required to pass EMI
regulations.
•
•
•
FCC approved method of EMI attenuation.
Provides up to 15dB of EMI suppression
Generates a low EMI spread spectrum clock of
the input frequency
•
•
50MHz to 173MHz input frequency range
Optimized for 54MHz, 65MHz, 81MHz, 140MHz,
and 162MHz pixel clock frequencies
Internal loop filter minimizes external components
and board space
8 selectable spread ranges, up to ± 2.2%
SSON# control pin for spread spectrum enable
and disable options
2 selectable modulation rates
Low Cycle-to-cycle jitter
3.3V Operating Voltage
Ultra low power CMOS design
The P2040C uses the most efficient and optimized
modulation profile approved by the FCC and is
implemented in a proprietary all-digital method. The
P2040C modulates the output of a single PLL in order to
“spread” the bandwidth of a synthesized clock and, more
importantly, decreases the peak amplitudes of its
harmonics. This result in a significantly lower system EMI
compared to the typical narrow band signal produced by
oscillators and most frequency generators. Lowering EMI
by increasing a signal’s bandwidth is called ‘spread
spectrum clock generation’.
•
•
•
•
•
•
•
•
Supports most mobile graphic accelerator and
LCD timing controller specifications
Available in 8 pin SOIC and TSSOP Packages
•
Applications
Product Description
The P2040C is targeted towards digital flat panel
applications for Notebook PCs, Palm-size PCs, Office
Automation Equipments and LCD Monitors.
The P2040C is a selectable spread spectrum frequency
modulator designed specifically for digital flat panel
applications. The P2040C reduces electromagnetic
interference (EMI) at the clock source which provides
Block Diagram
VDD
SR0 SR1 MRA
SSON#
PLL
Modulation
CLKIN
Frequency
Divider
Output
Divider
Phase
Loop
Filter
VCO
Detector
Feedback
Divider
ModOUT
VSS
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.6
P2040C
Pin Configuration
8
1
CLKIN
MRA
SR1
VDD
2
7
SR0
P2040C
6
3
ModOUT
SSON#
5
4
VSS
Pin Description
Pin
Pin#
Type
Description
Name
1
2
3
4
CLKIN
MRA
SR1
I
I
External reference frequency input. Connect to externally generated reference signal.
Digital logic input used to select modulation rate. This pin has an internal pull-up resistor.
Digital logic input used to select Spreading Range. This pin has an internal pull-up resistor.
Ground to entire chip. Connect to system ground.
I
VSS
P
Digital logic input used to enable Spread Spectrum function (Active LOW). Spread Spectrum
5
SSON#
I
function enabled when LOW, disabled when HIGH. This pin has an internal pull-low resistor.
6
7
8
ModOUT
SR0
O
I
Spread spectrum Clock Output.
Digital logic input used to select Spreading Range. This pin has an internal pull-up resistor.
Power supply for the entire chip.
VDD
P
Modulation Selection (Commercial) – Table 1
Spreading Range
MRA SR1 SR0
Modulation Rate
54MHz
±1.4%
±2.0%
±1.1%
±1.8%
±1.3%
±2.2%
±1.4%
±2.1%
65MHz
±1.2%
±1.9%
±0.9%
±1.5%
±1.3%
±2.1%
±1.3%
±2.1%
81MHz
±1.0%
±1.6%
±0.5%
±1.0%
±1.3%
±2.1%
±1.4%
±2.1%
140MHz
±0.6%
±1.0%
±0.3%
±0.54%
±1.25%
±2.0%
±1.2%
±1.9%
162MHz
±0.4%
±0.8%
±0.3%
±0.4%
±1.1%
±1.8%
±0.9%
±1.4%
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
(Fin/80) * 62.49KHz
(Fin/80) * 62.49KHz
(Fin/80) * 62.49KHz
(Fin/80) * 62.49KHz
(Fin/80) * 20.83KHz
(Fin/80) * 20.83KHz
(Fin/80) * 20.83KHz
(Fin/80) * 20.83KHz
LCD Panel EMI Reduction IC
2 of 9
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.6
P2040C
Spread Spectrum Selection
Table 1 illustrates the possible spread spectrum options. The optimal setting should minimize system EMI to the fullest
without affecting system performance. The spreading is described as a percentage deviation of the center frequency
(Note: The center frequency is the frequency of the external reference input on CLKIN, Pin 1).
Example: P2040C is designed for high resolution flat panel applications and is able to support panel frequencies from
50MHz to 173MHz. For a 65MHz pixel clock frequency, a spreading selection of MRA=0, SR1=1 and SR0 =1 provides a
percentage deviation of ±1.50% (see Table 1). This result in frequency on ModOUT being swept from 64.03MHz to
65.98MHz at a modulation rate of 50.77KHz (see Table 1). This particular example (see Figure below) given here is a
common EMI reduction method for notebook LCD panel and has already been implemented by most of the leading OEM
and mobile graphic accelerator manufacturers.
Application Schematic for Mobile LCD Graphics Controllers
+3.3V
Modulated 65MHz signal with
65MHz from graphics accelerator
±1.5 % deviation and modulation
rate of 50.77KHz. This signal is
connected back to the spread
spectrum input pin (SSIN) of the
graphics accelerator.
CLKIN
1
2
3
4
VDD
SR0
8
7
MRA
SR1
VSS
0.1µF
ModOUT
SSON#
6
5
Digital control for the SS enable
or disable
P2040C
LCD Panel EMI Reduction IC
3 of 9
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.6
P2040C
Absolute Maximum Ratings
Symbol
Parameter
Rating
-0.5 to +4.6
-65 to +125
-40 to +125
260
Unit
V
°C
°C
°C
VDD, VIN
TSTG
TA
Voltage on any pin with respect to Ground
Storage temperature
Operating temperature
Ts
Max. Soldering Temperature (10 sec)
Thermal Resistance from Junction For SOIC Package
156.5
ө
°C/W
°C
JA
to Ambient ( No Air Flow)
Junction Temperature
For TSSOP Package
124
TJ
150
2
Static Discharge Voltage
TDV
KV
(As per JEDEC STD22- A114-B)
Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect
device reliability.
DC Electrical Characteristics
(Test condition: All parameters are measured at room temperature (+25°C) unless otherwise stated)
Symbol
VIL
Parameter
Min
VSS - 0.3
Typ
-
-
Max
0.8
VDD + 0.3
Unit
V
V
Input low voltage
Input high voltage
VIH
2.0
IIL
IIH
VOL
VOH
IDD
ICC
VDD
tON
Input low current (pull-up resistor on inputs SR0, SR1 and MRA)
Input high current (pull-down resistor on input SSON#)
Output low voltage (VDD = 3.3V, IOL = 20mA)
Output high voltage (VDD = 3.3V, IOL = 20mA)
Static supply current standby mode
Dynamic supply current (3.3V and 10pF loading)
Operating Voltage
Power-up time (first locked cycle after power up)
Clock output impedance
-
-
-
-
-
-
-
-40
40
0.4
-
µA
µA
V
2.5
-
9
3.0
-
-
V
0.7
16
3.3
0.18
50
-
mA
mA
V
mS
Ω
22
3.6
-
ZOUT
-
AC Electrical Characteristics
Symbol
Parameter
Min
50
0.3
0.3
-
Typ
Max
173
1.0
Unit
fIN
tLH*
tHL*
tJC
Input frequency
MHz
nS
nS
pS
%
Output rise time (measured at 0.8V to 2.0V)
Output fall time (measured at 2.0V to 0.8V)
Jitter (cycle to cycle)
0.7
0.7
-
1.0
360
55
tD
Output duty cycle
45
50
*tLH and tHL are measured into a capacitive load of 15pF
LCD Panel EMI Reduction IC
4 of 9
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.6
P2040C
Package Information
8-lead (150-mil) SOIC Package
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
0.010
0.069
0.059
0.020
0.010
Min
0.10
1.35
1.25
0.31
0.18
Max
0.25
1.75
1.50
0.51
0.25
A1
A
0.004
0.053
0.049
0.012
0.007
A2
B
C
D
E
0.193 BSC
0.154 BSC
0.050 BSC
0.236 BSC
4.90 BSC
3.91 BSC
1.27 BSC
6.00 BSC
e
H
L
0.016
0°
0.050
8°
0.41
0°
1.27
8°
θ
LCD Panel EMI Reduction IC
5 of 9
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.6
P2040C
8-lead TSSOP (4.40-MM Body)
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A
A1
A2
B
0.043
0.006
0.037
0.012
0.008
0.122
0.177
1.10
0.002
0.033
0.008
0.004
0.114
0.169
0.05
0.85
0.19
0.09
2.90
4.30
0.15
0.95
0.30
0.20
3.10
4.50
c
D
E
e
0.026 BSC
0.252 BSC
0.65 BSC
6.40 BSC
H
L
0.020
0°
0.028
8°
0.50
0°
0.70
8°
θ
LCD Panel EMI Reduction IC
6 of 9
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.6
P2040C
Ordering Information
Part Number
P2040CF-08ST
P2040CF-08SR
P2040CF-08TT
P2040CF-08TR
I2040CF-08ST
I2040CF-08SR
I2040CF-08TT
I2040CF-08TR
X2040CF-08ST
X2040CF-08SR
X2040CF-08TT
X2040CF-08TR
P2040CG-08ST
P2040CG-08SR
P2040CG-08TT
P2040CG-08TR
I2040CG-08ST
I2040CG-08SR
I2040CG-08TT
I2040CG-08TR
X2040CG-08ST
X2040CG-08SR
X2040CG-08TT
X2040CG-08TR
Marking
P2040CF
P2040CF
P2040CF
P2040CF
I2040CF
I2040CF
I2040CF
I2040CF
X2040CF
X2040CF
X2040CF
X2040CF
P2040CG
P2040CG
P2040CG
P2040CG
I2040CG
I2040CG
I2040CG
I2040CG
X2040CG
X2040CG
X2040CG
X2040CG
Package Type
8-Pin SOIC, TUBE, Pb Free
Temperature
Commercial
Commercial
Commercial
Commercial
8-Pin SOIC, TAPE & REEL, Pb Free
8-Pin TSSOP, TUBE, Pb Free
8-Pin TSSOP, TAPE & REEL, Pb Free
8-Pin SOIC, TUBE, Pb Free
8-Pin SOIC, TAPE & REEL, Pb Free
8-Pin TSSOP, TUBE, Pb Free
8-Pin TSSOP, TAPE & REEL, Pb Free
8-Pin SOIC, TUBE, Pb Free
8-Pin SOIC, TAPE & REEL, Pb Free
8-Pin TSSOP, TUBE, Pb Free
8-Pin TSSOP, TAPE & REEL, Pb Free
8-Pin SOIC, TUBE, Green
8-Pin SOIC, TAPE & REEL, Green
8-Pin TSSOP, TUBE, Green
8-Pin TSSOP, TAPE & REEL, Green
8-Pin SOIC, TUBE, Green
8-Pin SOIC, TAPE & REEL, Green
8-Pin TSSOP, TUBE, Green
8-Pin TSSOP, TAPE & REEL, Green
8-Pin SOIC, TUBE, Green
8-Pin SOIC, TAPE & REEL, Green
8-Pin TSSOP, TUBE, Green
Industrial
Industrial
Industrial
Industrial
Automotive
Automotive
Automotive
Automotive
Commercial
Commercial
Commercial
Commercial
Industrial
Industrial
Industrial
Industrial
Automotive
Automotive
Automotive
Automotive
8-Pin TSSOP, TAPE & REEL, Green
LCD Panel EMI Reduction IC
7 of 9
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.6
P2040C
Device Ordering Information
P 2 0 4 0 C F - 0 8 S T
Package:
ST – SOIC, TUBE
SR - SOIC, T/R
TT – TSSOP, TUBE
TR - TSSOP, T/R
PIN COUNT
F = Pb FREE and RoHS COMPLIANT PART
G = GREEN PACKAGE, LEAD FREE, and RoHS
DEVICE NUMBER
P = Commercial Temperature Range (0°C to 70°C)
I = Industrial Temperature Range (-40°C to 85°C)
X = Automotive Temperature Range (-40°C to 125°C)
Licensed under U.S Patent Nos 5,488,627 and 5,631,921
LCD Panel EMI Reduction IC
8 of 9
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.6
P2040C
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200
Campbell, CA 95008
Copyright © PulseCore Semiconductor
All Rights Reserved
Preliminary Information
Part Number: P2040C
Document Version: v1.6
Tel: 408-879-9077
Fax: 408-879-9018
www.pulsecoresemi.com
Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003
© Copyright 2006 PulseCore Semiconductor Corporation. All rights reserved. Our logo and name are trademarks or
registered trademarks of PulseCore Semiconductor. All other brand and product names may be the trademarks of their
respective companies. PulseCore reserves the right to make changes to this document and its products at any time without
notice. PulseCore assumes no responsibility for any errors that may appear in this document. The data contained herein
represents PulseCore’s best data and/or estimates at the time of issuance. PulseCore reserves the right to change or
correct this data at any time, without notice. If the product described herein is under development, significant changes to
these specifications are possible. The information in this product data sheet is intended to be general descriptive information
for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or
customer. PulseCore does not assume any responsibility or liability arising out of the application or use of any product
described herein, and disclaims any express or implied warranties related to the sale and/or use of PulseCore products
including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual
property rights, except as express agreed to in PulseCore’s Terms and Conditions of Sale (which are available from
PulseCore). All sales of PulseCore products are made exclusively according to PulseCore’s Terms and Conditions of Sale.
The purchase of products from PulseCore does not convey a license under any patent rights, copyrights; mask works rights,
trademarks, or any other intellectual property rights of PulseCore or third parties. PulseCore does not authorize its products
for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result
in significant injury to the user, and the inclusion of PulseCore products in such life-supporting systems implies that the
manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising from such use.
LCD Panel EMI Reduction IC
9 of 9
Notice: The information in this document is subject to change without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明