4273-51 [PSEMI]
SPDT Broadband UltraCMOS⑩ DC - 3 GHz RF Switch; SPDT宽带的UltraCMOS ™ DC - 3 GHz的RF开关
| 型号： | 4273-51 |
| 厂家： | 
Peregrine Semiconductor |
| 描述： | SPDT Broadband UltraCMOS⑩ DC - 3 GHz RF Switch |
| 文件： | 总10页 (文件大小：200K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product Specification
PE4273
SPDT Broadband UltraCMOS™
DC – 3 GHz RF Switch
Product Description
The PE4273 RF Switch is designed for the TV tuner, PCTV, set
top box, DTV, DVR and general broadband applications. This
device offers industry leading broadband linearity, 1.5 kV ESD
tolerance and a simple CMOS interface. It offers a simple
alternative solution to pin diode and mechanical relay switches.
Features
• Single-pin or complementary CMOS logic
control inputs
• High ESD tolerance of 1.5 kV
• Low insertion loss: 0.50 dB at 1000 MHz,
The PE4273 SPDT Broadband RF Switch is manufactured on
Peregrine’s UltraCMOS™ process, a patented variation of
silicon-on-insulator (SOI) technology on a sapphire substrate,
offering the performance of GaAs with the economy and
integration of conventional CMOS.
0.65 dB at 2000 MHz
• Isolation of 34.5 dB at 1000 MHz, 25 dB at
2000 MHz
• Typical input 1 dB compression point of
+32 dBm
• Ultra-small SC-70 package
Figure 1. Functional Diagram
RFC
Figure 2. Package Type
6-lead SC-70
RF1
RF2
CMOS
Control
Driver
V1
V2
Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 75 Ω)
Parameter
Conditions
Units
Min
Max
Typical
Operation Frequency1
DC - 3000
1000 MHz
MHz
dB
DC
3000
0.50
0.65
0.60
0.75
Insertion Loss
2000 MHz
1000 MHz
dB
dB
32.5
23
34.5
25
Isolation (RFC - RF1/RF2)
Isolation (RF1 - RF2)
Return Loss
2000 MHz
1000 MHz
dB
dB
38.5
26
40.5
28
2000 MHz
1000 MHz
dB
dB
18.5
14
2000 MHz
dB
‘ON’ Switching Time3
‘OFF’ Switching Time3
Video Feedthrough2,3
Input 1 dB Compression3
Input IP33
50% CTRL to 0.1 dB of final value, 1 GHz
50% CTRL to 25 dB isolation, 1 GHz
µs
0.725
0.625
< 2
1.5
1.3
µs
mVpp
dBm
dBm
30
32
1000 MHz
53
1000 MHz, 19 dBm input power
Notes:
1. Device linearity will begin to degrade below 10 MHz.
2. Measured with a 1 ns risetime, 0/3 V pulse and 500 MHz bandwidth.
3. Measured in a 50 ꢀ system.
Document No. 70-0174-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 10
PE4273
Product Specification
Figure 3. Pin Configuration (Top View)
Table 4. DC Electrical Specifications
Parameter
Min
Typ
Max
Units
pin 1
1
2
3
6
5
4
RF1
GND
RF2
V2
VDD Power Supply
Voltage
2.7
3.0
3.3
V
RFC
V1
I
DD Power Supply Current
8
50
µA
(V1= 3V, V2= 3V)
Control Voltage High
Control Voltage Low
0.7x VDD
V
V
0.3x VDD
Table 2. Pin Descriptions
Latch-Up Avoidance
Pin
No.
Pin
Name
Description
Unlike conventional CMOS devices, UltraCMOS™
devices are immune to latch-up.
RF Port14
1
RF1
2
GND
Ground connection. Traces should be
physically short and connected to ground
plane for best performance.
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS™ device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the rating specified in Table 3.
RF Port24
3
RF2
4
5
V1
Switch control input, CMOS logic level.
RF Common4
RFC
6
V2
This pin supports two interface options:
Single-pin control mode. A nominal 3-volt
supply connection is required.
Complementary-pin control mode. A
complementary CMOS control signal
to V1 is supplied to this pin.
Figure 4. Maximum Operating Input Power5
Note: 4. All RF pins must be DC blocked with an external series
capacitor or held at 0 VDC.
Table 3. Absolute Maximum Ratings
Symbol
Parameter/Conditions Min Max
Units
Power supply voltage
Voltage on any input
-0.3
-0.3
4.0
V
V
VDD
VI
VDD
+
0.3
Storage temperature
range
-65
-40
150
°C
TST
Operating temperature
range
85
°C
TOP
PIN
Input power (50ꢀ)
+34
dBm
ESD Voltage (HBM,
ML_STD 883 Method
3015.7)
1500
100
V
V
VESD
ESD Voltage (MM,
JEDEC, JESD22-A114-B)
Note: 5. Operating within DC limits (Table 4).
Absolute Maximum Ratings are those values
listed in the above table. Exceeding these values
may cause permanent device damage.
Functional operation should be restricted to the
limits in the DC Electrical Specifications table.
Exposure to absolute maximum ratings for
extended periods may affect device reliability.
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0174-03 │ UltraCMOS™ RFIC Solutions
Page 2 of 10
PE4273
Product Specification
Table 5. Single-pin Control Logic Truth Table
Control Logic Input
Control Voltages
Signal Path
The PE4273 is a versatile RF CMOS switch that
supports two operating control modes; single-pin
control mode and complementary-pin control
mode.
Pin 6 (V2) = VDD
Pin 4 (V1) = High
RFC to RF1
Pin 6 (V2) = VDD
Pin 4 (V1) = Low
RFC to RF2
Single-pin control mode enables the switch to
operate with a single control pin (pin 4) supporting
a +3-volt CMOS logic input, and requires a
dedicated +3-volt power supply connection (pin 6).
This mode of operation reduces the number of
control lines required and simplifies the switch
control interface typically derived from a CMOS
µProcessor I/O port.
Table 6. Complementary-pin Control Logic
Truth Table
Control Voltages
Signal Path
Pin 6 (V2) = Low
Pin 4 (V1) = High
RFC to RF1
Pin 6 (V2) = High
Pin 4 (V1) = Low
Complementary-pin control mode allows the
switch to operate using complementary control
pins V1 and V2 (pins 4 & 6), that can be directly
driven by +3-volt CMOS logic or a suitable
µProcessor I/O port. This enables the PE4273 to
operate in positive control voltage mode within the
PE4273 operating limits.
RFC to RF2
Document No. 70-0174-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 3 of 10
PE4273
Product Specification
Figure 5. Evaluation Board Layouts
Peregrine Specification 101/0245
Evaluation Kit
The SPDT Switch Evaluation Kit board was
designed to ease customer evaluation of the
PE4273 SPDT switch. The RF common port is
connected through a 75 ꢀ transmission line to the
bottom F connector, J2. Port 1 and Port 2 are
connected through 75 ꢀ transmission lines to two F
connectors on either side of the board, J3 and J1. A
through transmission line connects F connectors J4
and J5. This transmission line can be used to
estimate the loss of the PCB over the environmental
conditions being evaluated.
The board is constructed of a two metal layer FR4
material with a total thickness of 0.031”. The bottom
layer provides ground for the RF transmission lines.
The transmission lines were designed using a
coplanar waveguide with ground plane model using
a trace width of 0.021”, trace gaps of 0.030”,
dielectric thickness of 0.028”, copper thickness of
0.0021” and εr of 4.3.
J6 and J7 provide a means for controlling the DC
inputs to the device. The lower left header (J6) is
connected to the device V1 input. The lower right
header (J7) is connected to the device V2 input.
Series resistors (R1 and R2) are provided to reduce
the package resonance between RF and DC lines.
Footprints for decoupling capacitors (100 pF) are
provided on both V1 and V2 traces. It is the
responsibility of the customer to determine proper
supply decoupling for their design application.
Removing these components from the evaluation
board has not been shown to degrade RF
performance.
Figure 6. Evaluation Board Schematic
Peregrine Specification 102/0311
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0174-03 │ UltraCMOS™ RFIC Solutions
Page 4 of 10
PE4273
Product Specification
Typical Performance Data
Figure 7. Isolation: RF1 - RF2 @ 25 °C
Figure 8. Isolation: RF1 - RF2 @ 3.0 V
Figure 9. Isolation: RFC - RF1/RF2 @ 25 °C
Figure 10. Isolation: RFC - RF1/RF2 @ 3.0 V
Document No. 70-0174-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 10
PE4273
Product Specification
Typical Performance Data
Figure 11. Insertion Loss @ 25 °C
Figure 12. Insertion Loss @ 3.0 V
Figure 13. Return Loss: RF1/RF2 @ 25 °C
Figure 14. Return Loss: RF1/RF2 @ 3.0 V
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0174-03 │ UltraCMOS™ RFIC Solutions
Page 6 of 10
PE4273
Product Specification
Typical Performance Data
Figure 15. Return Loss: RFC/RF1 @ 25 °C
Figure 16. Return Loss: RFC/RF1 @ 3.0 V
Figure 17. Return Loss: RFC/RF2 @ 25 °C
Figure 18. Return Loss: RFC/RF2 @ 3.0 V
Document No. 70-0174-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 7 of 10
PE4273
Product Specification
Typical Performance Data
Figure 19. Input 1 dB Compression and IIP3
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0174-03 │ UltraCMOS™ RFIC Solutions
Page 8 of 10
PE4273
Product Specification
Figure 20. Package Drawing
6-lead SC-70
1.80
2.20
0.65
BSC
0.10
0.30
1.80
2.40
1.15
1.35
0.10
0.40
0.15
0.30
0.10
0.18
0.80
1.00
0.80
1.10
0.00
0.10
Table 7. Ordering Information
Order Code
4273-01
Part Marking
Description
Package
6-lead SC-70
Shipping Method
7680 units / Canister
3000 units / T&R
1 / Box
273
273
PE4273-06SC70-7680A
PE4273-06SC70-3000C
PE4273-06SC70-EK
4273-02
6-lead SC-70
4273-00
PE4273-EK
273
Evaluation Kit
4273-51
PE4273G-06SC70-7680A
PE4273G-06SC70-3000C
Green 6-lead SC-70
Green 6-lead SC-70
7680 units / Canister
3000 units / T&R
4273-52
273
Document No. 70-0174-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 9 of 10
PE4273
Product Specification
Sales Offices
The Americas
North Asia Pacific
Peregrine Semiconductor Corp.
9450 Carroll Park Drive
San Diego, CA 92121
Peregrine Semiconductor K.K.
5A-5, 5F Imperial Tower
1-1-1 Uchisaiwaicho, Chiyoda-ku
Tokyo 100-0011 Japan
Tel 858-731-9400
Fax 858-731-9499
Tel: +81-3-3502-5211
Fax: +81-3-3502-5213
Europe
South Asia Pacific
Peregrine Semiconductor Europe
Commercial Products:
Bâtiment Maine
13-15 rue des Quatre Vents
F- 92380 Garches, France
Tel: +33-1-47-41-91-73
Peregrine Semiconductor
28G, Times Square,
No. 500 Zhangyang Road,
Shanghai, 200122, P.R. China
Tel: +86-21-5836-8276
Fax: +86-21-5836-7652
Fax : +33-1-47-41-91-73
Space and Defense Products:
180 Rue Jean de Guiramand
13852 Aix-En-Provence cedex 3, France
Tel: +33(0) 4 4239 3361
Fax: +33(0) 4 4239 7227
For a list of representatives in your area, please refer to our Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The information in this data sheet is believed to be reliable.
However, Peregrine assumes no liability for the use of this
information. Use shall be entirely at the user’s own risk.
The product is in a formative or design stage. The data
sheet contains design target specifications for product
development. Specifications and features may change in
any manner without notice.
No patent rights or licenses to any circuits described in this
data sheet are implied or granted to any third party.
Preliminary Specification
Peregrine’s products are not designed or intended for use in
devices or systems intended for surgical implant, or in other
applications intended to support or sustain life, or in any
application in which the failure of the Peregrine product could
create a situation in which personal injury or death might occur.
Peregrine assumes no liability for damages, including
consequential or incidental damages, arising out of the use of
its products in such applications.
The data sheet contains preliminary data. Additional data
may be added at a later date. Peregrine reserves the right
to change specifications at any time without notice in order
to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine
decides to change the specifications, Peregrine will notify
customers of the intended changes by issuing a DCN
(Document Change Notice).
The Peregrine name, logo, and UTSi are registered trademarks
and UltraCMOS is a trademark of Peregrine Semiconductor
Corp.
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0174-03 │ UltraCMOS™ RFIC Solutions
Page 10 of 10
相关型号：
©2020 ICPDF网 联系我们和版权申明