SLVU2.8-8-T13 [PROTEC]
ULTRA LOW CAPACITANCE TVS ARRAY; 超低电容TVS阵列型号: | SLVU2.8-8-T13 |
厂家: | PROTEK DEVICES |
描述: | ULTRA LOW CAPACITANCE TVS ARRAY |
文件: | 总5页 (文件大小:75K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SLVU2.8-8
ULTRA LOW CAPACITANCE TVS ARRAY
APPLICATIONS
✔ Ethernet - 10/100/1000 Base T
✔ Cellular Phones
✔ Audio/Video Inputs
✔ Handheld Electronics
✔ Personal Digital Assistant (PDA)
IEC COMPATIBILITY (EN61000-4)
✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
SO-8
✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Ground) & Level 3(Line-Line)
FEATURES
✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs)
✔ Provides Protection For Four Line Pairs
✔ ESD Protection > 40 kilovolts
✔ Low Leakage Current < 1.0µA
✔ Ultra Low Capacitance: 6pF Typical
✔ RoHS Compliant
MECHANICAL CHARACTERISTICS
✔ Molded JEDEC SO-8
✔ Weight 70 milligrams (Approximate)
✔ Available in Lead-Free Pure-Tin Plating(Annealed)
✔ Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
✔ Consult Factory for Leaded Device Availability
✔ Flammability Rating UL 94V-0
✔ 12mm Tape and Reel Per EIA Standard 481
✔ Marking: Marking Code, Logo, Date Code & Pin One Defined By Dot on Top of Package
PIN CONFIGURATION
8
5
7
6
1
2
3
4
05181.R3 3/07
1
www.protekdevices.com
SLVU2.8-8
DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
SYMBOL
VALUE
600
UNITS
Watts
Amps
°C
PARAMETER
Peak Pulse Power (tp = 8/20µs) - See Fig. 1
Peak Pulse Current (tp = 8/20µs)
PPP
IPP
30
Lead Soldering Temperature
IFRM
260
Operating Temperature
Storage Temperature
T
-55 to 150
-55 to 150
°C
°C
L
TSTG
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
TYPICAL
CAPACITANCE
(See Note 1)
PART
NUMBER
DEVICE
MARKING
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MINIMUM
SNAPBACK
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
(See Note 1)
(See Fig. 2)
MAXIMUM
LEAKAGE
CURRENT
(See Note 1)
(See Note 1)
(See Note 1)
(See Note 1)
@0V, 1MHz
@ 1mA
V(BR)
@ISB = 50mA
VSB
@IPP = 2A
VC
@VWM
ID
@IPP = 5A @IPP = 24A @IPP = 30A
C
VWM
VC
VC
VC
pF
VOLTS
VOLTS
VOLTS
VOLTS
µA
VOLTS
VOLTS
VOLTS
SLVU2.8-8
SL8
2.8
3.0
2.8
5.5
8.5
15
17
1.0
6
Note 1: Device measured between pin 1 to 2, pin 3 to 4, pin 5 to 6 and pin 7 to 8.
FIGURE 1
FIGURE 2
PEAK PULSE POWER VS PULSE TIME
PULSE WAVE FORM
120
10,000
TEST
tf
WAVEFORM
PARAMETERS
tf = 8µs
Peak Value IPP
100
500W 8/20µs Waveform
1,000
100
10
80
60
40
td = 20µs
e-t
td = t
IPP/2
20
0
0
5
10
15
20
25
30
0.1
1
10
100
1,000
10,000
t - Time - µs
td - Pulse Duration - µs
05181.R3 3/07
www.protekdevices.com
2
SLVU2.8-8
GRAPHS
FIGURE 3
POWER DERATING CURVE
100
80
Peak Pulse Power
8/20µs
60
40
20
0
Average Power
0
25
50
75
100
125 150
TL - Lead Temperature - °C
FIGURE 4
TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT
20
16
12
8
4
0
0
5
10
15
20
25
30
IPP - Peak Pulse Current A
05181.R3 3/07
3
www.protekdevices.com
SLVU2.8-8
APPLICATION NOTE
Electronic equipment is susceptible to damage caused by Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), and tertiary lightning effects.
Knowing that equipment can be damaged, the SLVU2.8-8 was designed to provide the level of protection required to safe guard sensitive equipment.
This product can be used in different configurations to provide a level of protection to meet bidirectional requirements either in a common-mode or
differential-mode configuration.
BIDIRECTIONAL COMMON-MODE CONFIGURATION (Figure 1)
Figure 1. Bidirectional Common-Mode Protection
The SLVU2.8-8 provides up to four lines of protection in a common-mode configuration as
depicted in figure 1.
Circuit connectivity is as follows:
✔
✔
✔
✔
✔
Line 1 is connected to Pin 1
Line 2 is connected to Pin 8
Line 3 is connected to Pin 5
Line 4 is connected to Pin 4
Pins 2, 3, 6 and 7 are connected to ground
BIDIRECTIONAL DIFFERENTIAL-MODE CONFIGURATION (Figure 2)
The SLVU2.8-8 provides up to four line paris of protection in a differential-mode configura-
tion as depicted in figure 2.
Circuit connectivity is as follows:
✔
✔
✔
✔
Line Pair 1 is connected to Pins 1 & 2
Line Pair 2 is connected to Pins 3 & 4
Line Pair 3 is connected to Pins 7 & 8
Line Pair 4 is connected to Pins 5 & 6
Figure 2. Bidirectional Differential-Mode Protection
CIRCUIT BOARD LAYOUT RECOMMENDATIONS
Circuit board layout is critical for Electromagnetic
Compatibility (EMC) protection. The following
guidelines are recommended:
✔
The protection device should be placed near the
input terminals or connectors, the device will
divert the transient current immediately before it
can be coupled into the nearby traces.
✔
✔
✔
The path length between the TVS device and
the protected line should be minimized.
All conductive loops including power and ground
loops should be minimized.
The transient current return path to ground
should be kept as short as possible to reduce
parasitic inductance.
✔
Ground planes should be used whenever
possible. For multilayer PCBs, use ground vias.
05181.R3 3/07
www.protekdevices.com
4
SLVU2.8-8
SO-8 PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
SO-8
-A-
8
1
5
0.010 (0.25 MM)
B
M
M
+
PACKAGE DIMENSIONS
P
-B -
4 PL
INCHES
MILLIMETERS
4
DIM
MIN
MAX
MIN
MAX
A
B
C
D
F
G
J
K
P
R
4.80
3.80
1.35
0.35
0.40
5.00
4.00
1.75
0.49
1.250
0.189
0.150
0.054
0.014
0.016
0.196
0.157
0.068
0.019
0.049
D
G
C
R x 45°
1.27 BSC 1.27 BSC 0.05 BSC 0.05 BSC
0.18
0.10
5.80
0.25
0.25
0.25
6.20
0.50
0.007
0.004
0.229
0.010
0.009
0.008
0.244
0.019
0° - 10°
-T-
J
K
F
NOTES
0.010 (0.25 MM)
T B
A
S S
M
+
8 PL
1. - T - = Seating Plane and Datum Surface.
2. Dimensions “A” and “B” are Datum.
3. Dimensions “A” and “B” do not include mold protrusion.
4. Maximum mold protrusion is 0.015” (0.380 mm) per side.
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.
6. Dimensions are exclusive of mold flash and metal burrs.
MOUNTING PAD
0.050 ± 0.005
0.030 ± 0.005
TAPE & REEL/BULK ORDERING NOMENCLATURE
1. Surface mount product is taped and reeled in accordance with EIA-481.
2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e. SLVU2.8-8-T7.
3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape,
i.e., SLVU2.8-8-T13.
0.160 ± 0.005
0.245 MIN
4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., SLVU2.8-8-LF-T7.
5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube.
0.045 ± 0.005
Outline & Dimensions: Rev 1 - 11/01, 06009
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
COPYRIGHT © ProTek Devices 2007
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).
Tel: 602-431-8101 Fax: 602-431-2288
E-Mail: sales@protekdevices.com
Web Site: www.protekdevices.com
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is
the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such
products.
05181.R3 3/07
5
www.protekdevices.com
相关型号:
SLVU2.8-8.TE
Trans Voltage Suppressor Diode, 600W, 2.8V V(RWM), Bidirectional, 4 Element, Silicon, PLASTIC, SO-8
SEMTECH
©2020 ICPDF网 联系我们和版权申明