IES020ZG-A [POWER-ONE]

IES SERIES 20 WATT; IES系列20瓦
IES020ZG-A
型号: IES020ZG-A
厂家: POWER-ONE    POWER-ONE
描述:

IES SERIES 20 WATT
IES系列20瓦

文件: 总3页 (文件大小:262K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
IES SERIES  
20 WATT  
Powering Communications and Technology  
DESCRIPTION  
IES DC/DC converters provide up to 20 Watts of  
output power in an industry standard package. With  
88% efficiency and a maximum case temperature of  
100°C, the IES is well suited for the most demanding  
telecom, networking, and industrial applications.  
The IES features 1500 VDC isolation, short circuit,  
and overtemperature protection.  
FEATURES  
Efficiency vs. Load (24V Input)  
• 20W Standard Package  
• 100°C Case Operation  
• 3.3V Output Available  
• Open Frame or  
• 88% Efficiency at 5V  
• Wide Range Input  
• 1500V Isolation  
• Short Circuit  
85  
80  
75  
70  
Encapsulated  
Protection  
65  
IES020YG-A  
60  
TECHNICAL SPECIFICATIONS  
EFF. (18v)  
55  
EFF. (24v)  
Input  
50  
45  
40  
EFF. (36v)  
Voltage Range  
24 VDC Nominal  
16 - 36 VDC  
36 - 72 VDC  
<34V or <17V  
1V Nom.  
48 VDC Nominal  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
Input Undervoltage Lockout  
UVLO Hysteresis  
LOAD %  
Reflected Ripple  
25 mA  
Input Reverse Voltage Protection  
Shunt Diode  
Efficiency vs. Load (48V Input)  
Output  
90  
85  
80  
75  
70  
65  
60  
55  
50  
45  
40  
Setpoint Accuracy  
±1%  
Line Regulation V Min. - V Max., I  
Rated  
in  
0.2% V  
0.5% V  
in  
in  
out  
Max., V Nom.  
out  
out  
Load Regulation I  
Min. - I  
out  
out  
Minimum Output Current  
Dynamic Regulation, Loadstep  
Pk Deviation  
10 %  
25% I  
out  
out  
IES020ZG-A  
EFF. (36v)  
EFF. (48v)  
EFF. (72v)  
4% V  
Settling Time  
500 µs  
±10%  
Voltage Trim Range  
Short Circuit / Overcurrent Protection  
Current Limit Threshold Range, % of I  
OVP Trip Range  
Shutdown / Hiccup  
110 - 140%  
Rated  
out  
115 - 140% V  
Nom.  
out  
OVP Type  
Second Control Loop, Self-Recovering  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
LOAD %  
General  
Turn-On Time  
Remote Shutdown  
Switching Frequency  
Isolation  
10 ms  
Positive Logic  
Notes  
300 kHz Open Frame / 450 kHz Cased  
MTBF predictions may vary slightly from model to model.  
Input - Output  
1500 VDC  
500 VDC  
500 VDC  
0.03%/°C  
Input - Case (24  
Units)  
Vin  
Vin  
Specifications typically at 25°C, normal line, and full load,  
unless otherwise stated.  
Output - Case (48  
Units)  
Temperature Coefficient  
Case Temperature  
Operating Range  
Storage Range  
Soldering Conditions: I/O pins, 260°C, ten seconds; fully  
compatible with commercial wave-soldering equipment.  
-40 To +100°C  
-40 To +125°C  
95%  
Humidity Max., Non-Condensing  
Vibration, 3 Axes, 5 Min Each  
Safety: Agency approvals may vary from model to model.  
Please consult factory for specific model information.  
5 g, 10 - 55 Hz  
6
MTBF (Bellcore TR-NWT-000332)  
1.9 x 10 hrs  
Safety  
UL, CSA, EN60950  
Units are water-washable and fully compatible with commercial  
spray or immersion post wave-solder washing equipment.  
Weight (approx.)  
1.2 oz  
1
IES SERIES  
20 WATT  
Powering Communications and Technology  
MODELS - (See the last page of Section for options.)  
Selection Chart  
Vin  
(Volts)  
Vin Range  
(Volts)  
Iin Max.*  
(Amps)  
Vout  
(Volts)  
Iout Rated  
(Amps)  
Ripple & Noise  
Pk-Pk (mV)  
Efficiency  
Typ. **  
Model  
IES020YG-A  
IES013ZE-A  
IES020ZG-A  
24  
48  
48  
16 - 36  
36 - 72  
36 - 72  
1.23  
0.45  
0.65  
5.0  
3.3  
5.0  
4.0  
4.0  
4.0  
75  
150  
75  
87%  
83%  
87%  
* Maximum input current at minimum input voltage, maximum rated output power.  
** At nominal Vin, rated output.  
MECHANICAL DRAWING  
Thermal Impedance  
Pin  
Function  
Tolerances  
Encapsulated Open Frame  
1
2
3
4
5
6
7
8
9
+V  
in  
Inches:  
(Millimeters)  
.X ± 0.5  
Modules  
Modules  
.XX ± 0.020  
.XXX ± 0.010  
Natural Convection  
100 LFM  
15.4 °C/W  
12.2 °C/W  
9.3 °C/W  
7.4 °C/W  
6.4 °C/W  
14.9 °C/W  
11.3 °C/W  
8.3 °C/W  
6.8 °C/W  
5.4 °C/W  
-V  
in  
.XX ± 0.25  
No Pin  
200 LFM  
Pin:  
300 LFM  
Shutdown  
± 0.002  
± 0.05  
400 LFM  
+V  
-V  
Trim  
out  
out  
Case:  
Note:  
+ 0.04, - 0.00  
+ 1.0, - 0.00  
Thermal impedance data is dependent on many  
environmental factors. The exact thermal performance  
should be validated for specific application.  
No Pin  
No Pin  
(Dimensions as listed unless  
otherwise specified.)  
2
OPTIONS  
Powering Communications and Technology  
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and  
add them to the model number. Example ordering options are located below the options table.  
OPTIONS  
Negative Logic  
SUFFIX  
APPLICABLE SERIES  
REMARKS  
N
HAS, HBD, HBS, HES, HLS, LES,  
QBS, QES, QLS, TES, TQD  
TTL "Low" Turns Module ON  
TTL "High" Turns Module OFF  
HAS, HBD, HBS, HES, HLS, QBS, QES,  
QLS  
Lucent Compatible Trim  
Terminal Strip  
T
TS  
XWS, XWD, XWT  
Trim  
1
2
IAS, LES  
Enable  
IAD, IAS, LES, SMS  
Trim and Enable  
Current Share  
3
4
Y
IAS, LES  
SMS  
Headerless  
PIN LENGTH AND HEATSINK  
OPTIONS  
Encapsulated EWS, IWS, OWS  
Standard Pin Length is 0.180"  
(4.6mm)  
0.110" (2.8mm) Pin Length  
0.150" (3.8mm) Pin Length  
8
9
All Units (Except SMS)  
All Units (Except SMS)  
All Units (Except DIP, HLS, HLD, QLS,  
SIP, SM TLD, and TKD Packages)  
All Units (Except DIP, HLS, HLD, QLS,  
SIP, SM TLD, and TKD Packages)  
All Units (Except DIP, HLS, HLD, QLS,  
SIP, SM TLD, and TKD Packages)  
All Units (Except DIP, HLS, HLD, QLS,  
SIP, SM TLD, and TKD Packages)  
All Units (Except DIP, HLS, HLD, QLS,  
SIP, SM TLD, and TKD Packages)  
All Units (Except DIP, HLS, HLD, QLS,  
SIP, SM TLD, and TKD Packages)  
0.24" (6.1mm) Horizontal Heatsink  
0.24" (6.1mm) Vertical Heatsink  
0.45" (11.4mm) Horizontal Heatsink  
0.45" (11.4mm) Vertical Heatsink  
0.95" (24.1mm) Horizontal Heatsink  
0.95" (24.1mm) Vertical Heatsink  
1H  
1V  
2H  
2V  
3H  
3V  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Example Options:  
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink.  
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.  
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.  
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems, equipment used  
in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.  
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manu-  
factured. Specifications are subject to change without notice.  
3

相关型号:

IES020ZG-A1H

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A1V

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A2V

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A3H

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A3V

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A8

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A81H

暂无描述
BEL

IES020ZG-A81V

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A82H

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A83H

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A83V

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL

IES020ZG-A9

DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid
BEL