OED4208-10.00M [PLETRONICS]
CMOS Output Clock Oscillator, 10MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-8;
| 型号： | OED4208-10.00M |
| 厂家： | 
PLETRONICS, INC. |
| 描述： | CMOS Output Clock Oscillator, 10MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-8 机械 振荡器 |
| 文件： | 总6页 (文件大小：93K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
OeD4208-10.00M
TCVCXO Oscillator
November 2010
• Pletronics’ OeD4 is from the OeXO™ Series of
temperature compensated voltage controlled
crystal oscillator with a CMOS output.
• 3.2 x 5 mm LCC Ceramic Package
• Supply Voltage: 3.3V
• Cut Tape -or- Tape and Reel packaging
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.10 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020D.1
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
Vi Input Voltage
Vo Output Voltage
-0.5V to +6.5V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
Charged Device Model
1500
1000
MIL-STD-883 Method 3115
JESD 22-C101
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2010, Pletronics Inc.
OeD4208-10.00M
TCVCXO Oscillator
November 2010
Part Marking:
2000
yww
PLE
X
YWW
Z
=
=
=
=
=
=
20.00MHz, the crystal frequency
Year and Week of the crystal manufacture
Pletronics
Model number, normally a “B”
Year and Week of assembly of the TCXO
internal factory code
2000.yww
C PLExYWWz
The actual part number is OED4208-10.00M where the model number “208” is the specification number
the part is made to. This is not included in the part marking. This is included on the label on the Tape and
Reel.
Note that the crystal frequency is 2 times the specified frequency of 10.00MHz. The TCVCXO IC used
divides the crystal frequency be 2 resulting in a 10.00MHz output
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
The bar code will show the actual Part Number
(OED4208-10.00M)
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
Vibration
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
Solderability
Thermal Shock
MIL-STD-883 Method 1011, Condition A
www.pletronics.com
425-776-1880
2
OeD4208-10.00M
TCVCXO Oscillator
November 2010
Electrical Specification for specified Vcc= 3.3V ±5% over the specified
temperature range.
Item
Min
TYP
Max
Unit
Condition
Frequency Stability
over temperature
at fixed supply voltage
+ load (reference to
midpoint min/max
frequency)
-75
-
75
ppb
Over -20oC to 70oC
Holdover
-75
-40
0
0
75
40
ppb
ppb
Over -20oC to 70oC for 24 hours
Over +_5oC change for 24 hours
Frequency Calibration
-2.0
-
2.0
ppm
Frequency offset at 25oC,
60 minutes after reflow.
Supply voltage stability
Load sensitivity
-10
-5
-
0
-
10
5
ppb
ppb
S
+_ 2% variation in supply voltage
10K ohm +_5% || 10 pF +_10%
Time to reach specified frequency
Warm Up
0.4
3.0
Aging rate following reflow
-
-
-
±10
±3
±1
-
-
-
1 day after reflow
7 days after reflow
30 days after reflow
ppb/day
ppb
Long term stability (Aging) -1000
-
-
-
1000
1500
4600
after 1 year
after 5 years
after 15 years
-1500
-4600
Output Waveform
CMOS
Output VHIGH
Output VLOW
90
-
-
-
-
%Vs
%Vs
nS
Load: 10K ohm +_5% || 10 pF +_10%
10
6.5
60
Vth: TR and TF 10% and 90% of amplitude
Vth: D.C. 50% of amplitude
T
RISE and TFALL
-
-
Duty Cycle
40
50
%
Phase Noise
1 Hz
10 Hz
100 Hz
1 KHz
10 KHz
100 KHz
-
-
-
-
-
-
-71
-93
-117
-138
-152
-155
-
-
-
-
-
-
at 25oC
dBc/Hz
Jitter
-
3.13
-
-
0.6
3.47
3.0
pS
Volts
mA
Frequency offset from carrier 12kHz to 20MHz
V Supply Range 1 VCC
3.30
Supply Current
Vcontrol Range
Frequency Pullability
Linearity
ICC
-
0.5
5
-
2.50
10
Volts
±ppm
%
1.50 volts nominal
-
Slope positive
-
0.05
2.0
In accordance with MIL-PRF-55310
Widest range allowed
Operating Temperature
-20
-
+70
oC
Storage Temperature
-55
-
+95
oC
Note: 1 For correct operation a 10nF supply de-coupling capacitor should be placed next to the device.
www.pletronics.com
425-776-1880
3
OeD4208-10.00M
TCVCXO Oscillator
November 2010
Mechanical:
Inches
mm
A
0.197 +_0.008
5.00 +_0.20
4
1
B
C
0.126 +_0.008
0.059 max
3.20 +_0.20
1.50 max
1.40
D1 0.0.55
E1 0.031
0.80
3
2
F1
0.043
1.10
G1 0.102
2.60
H1 0.013C
0.50C
0.20R
Not to Scale
1 Typical dimensions
J1
0.008
Contacts:
Gold 11.8 to 39.4 µinches (0.3 to1.0 µm)
over
Nickel 50 to 350 µinches (1.27 to 8.89 µm)
Pad
Function
Note
1
2
3
4
-
Vcontrol Input
Ground (GND)
Output
If this function is not specified, recommend connecting this pad to ground.
CMOS
Supply Voltage (VCC)
N. C.
Connect an appropriate power supply bypass capacitors as close as possible.
All other pads on the bottom shall not be connected. These are internally
connected and were for the TCXO compensation process
Layout and application information
All connection points in the designated region have solder mask
cover to avoid any electrical connections
For Optimum Stability and Jitter Performance, Pletronics
recommends:
•
•
•
•
•
a ground plane under the device
no large transient signals (both current and voltage) should be routed under the device
do not layout near a large magnetic field such as a high frequency switching power supply
do not place near piezoelectric buzzers or mechanical fans.
minimize air flow across the device
www.pletronics.com
425-776-1880
4
OeD4208-10.00M
TCVCXO Oscillator
November 2010
Reflow Cycle (typical for lead free processing)
260°C Maximum
10 Seconds Maximum
250
215°C±10°C
200
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
Allowed rate of temperature change
Maximum 4°C per second
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
T1
Max
Tape
Size
D1
Min
S1
Min
T
Max
D0
E1
P0
P2
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
_+0.05
1.5
1.75
+_0.1
4.0
0.6
0.6
0.1
+0.1
-0.0
_+0.1
2.0
+_0.1
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
14.25
F
P1
T2
Max
W
Max
Ao, Bo &
Ko
16 mm
12.1
7.5 +_0.1
8.0 +_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
mm
7.0
177.8
2.50
63.5
10.0
254.0
13.0
330.2
3.75
95.3
inches
mm
4.00
101.6
Tape
Width
C
D
mm
13.0 +0.5 / -0.2
mm
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
Reel dimensions may vary
from the above
www.pletronics.com
425-776-1880
5
OeD4208-10.00M
TCVCXO Oscillator
November 2010
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a warranty
or endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Fax: 425-776-2760
E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
Copyright © 2010, Pletronics Inc.
www.pletronics.com
425-776-1880
6
相关型号：
OEDK10N5105
Through Beam Photoelectric Sensor, 10mm Min, 10mm Max, 100mA, Rectangular, Panel Mount, THROUGH BEAM SENSOR
IVO
OEDK10N5105/S35A
Through Beam Photoelectric Sensor, 10mm Min, 10mm Max, 100mA, Rectangular, Board Mount, THROUGH BEAM SENSOR
IVO
©2020 ICPDF网 联系我们和版权申明