3214320 [PHOENIX]
CONN TERM BLK DISCONN 10-26AWG;
| 型号： | 3214320 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | CONN TERM BLK DISCONN 10-26AWG 端子和端子排 |
| 文件： | 总20页 (文件大小：194K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Fuse modular terminal block, Connection method: Screw connection, Cross section: 0.14 mm²- 6 mm²,
AWG: 26 - 10, Nominal current: 28 A, Nominal voltage: 500 V, Width: 6.2 mm, Fuse type: G / 5 x 20, Fuse
type: Glass / ceramics / ..., Mounting type: NS 35/7,5, NS 35/15, Color: black
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
Weight per Piece (excluding packing)
Custom tariff number
Country of origin
50 STK
36.400 g
85369085
Poland
Technical data
Environmental Product Compliance
China RoHS
Hazardous substances above threshold values;
Environmentally Friendly Use Period = 50;
For details go to tab “Downloads”, Category “Manufacturer's declaration”
General
The current is determined by the fuse used, the voltage by the selected
LED.
Note
If the fuse is faulty, the downstream circuit will not be disconnected.
Number of levels
Number of connections
Nominal cross section
Color
3
5
4 mm²
black
PA
Insulating material
Flammability rating according to UL 94
Fuse
V0
G / 5 x 20
09/01/2016 Page 1 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Technical data
General
Fuse type
Glass / ceramics / ...
Rated surge voltage
Degree of pollution
Overvoltage category
Insulating material group
6 kV
3
III
I
max. 1.6 W (With single arrangement of the fuse terminal block in the
event of overload)
Maximum power dissipation
Connection in acc. with standard
Maximum load current
IEC 60947-7-2/IEC 60947-7-3
36 A (with 6 mm² conductor cross section)
28 A (with 4 mm² conductor cross section)
500 V
Nominal current IN
Nominal voltage UN
Connection in acc. with standard
Maximum load current (upper level)
Nominal current IN (upper level)
Nominal voltage UN
IEC 60947-7-3
6.3 A (the current is determined by the fuse used)
6.3 A
500 V (the voltage is determined by the fuse used)
No
Open side panel
Shock protection test specification
Back of the hand protection
Finger protection
DIN EN 50274 (VDE 0660-514):2002-11
guaranteed
guaranteed
Oscillation, broadband noise test result
Test specification, oscillation, broadband noise
Test spectrum
Test passed
DIN EN 50155 (VDE 0115-200):2008-03
Service life test category 1, class B, body mounted
f1 = 5 Hz to f2 = 150 Hz
Test frequency
0.964 (m/s2)2/Hz
ASD level
Acceleration
0.58 g
Test duration per axis
Test directions
5 h
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
Shock form
DIN EN 50155 (VDE 0115-200):2008-03
Half-sine
Acceleration
5 g
Shock duration
30 ms
Number of shocks per direction
Test directions
3
X-, Y- and Z-axis (pos. and neg.)
130 °C
Relative insulation material temperature index (Elec., UL 746 B)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold -60 °C
09/01/2016 Page 2 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Technical data
General
Behavior in fire for rail vehicles (DIN 5510-2)
Flame test method (DIN EN 60695-11-10)
Test passed
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)
Calorimetric heat release NFPA 130 (ASTM E 1354)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
passed
passed
passed
28 MJ/kg
HL 1 - HL 3
HL 1 - HL 3
HL 1 - HL 3
HL 1 - HL 3
Dimensions
Width
6.2 mm
Length
92.7 mm
88.9 mm
96.4 mm
Height NS 35/7,5
Height NS 35/15
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section solid min.
0.14 mm²
6 mm²
Conductor cross section solid max.
Conductor cross section flexible min.
0.14 mm²
6 mm²
Conductor cross section flexible max.
Conductor cross section AWG min.
26
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
Conductor cross section flexible, with ferrule without plastic sleeve max.
Conductor cross section flexible, with ferrule with plastic sleeve min.
Conductor cross section flexible, with ferrule with plastic sleeve max.
2 conductors with same cross section, solid min.
2 conductors with same cross section, solid max.
2 conductors with same cross section, stranded min.
2 conductors with same cross section, stranded max.
0.14 mm²
4 mm²
0.14 mm²
4 mm²
0.14 mm²
1.5 mm²
0.14 mm²
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.14 mm²
09/01/2016 Page 3 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Technical data
Connection data
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, max.
1.5 mm²
Connection method
Stripping length
Screw connection
9 mm
A4
Internal cylindrical gage
Screw thread
M3
Tightening torque, min
Tightening torque max
0.6 Nm
0.8 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-2/IEC 60947-7-3
IEC 60947-7-3
V0
Flammability rating according to UL 94
Drawings
Circuit diagram
Application
drawing
Fuse
terminal
blocks
in
interconne
arrangeme
block
consisting
of
5
fuse
terminal
blocks
Application
drawing
Fuse
terminal
block
in
09/01/2016 Page 4 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
single
arrangement,
block
consisting
of
one
fuse
terminal
block
and
4
feed-
through
terminal
blocks
Classifications
eCl@ss
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 8.0
eCl@ss 9.0
27141116
27141116
27141116
27141116
ETIM
ETIM 4.0
ETIM 5.0
EC000899
EC000899
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / CSA / cULus Recognized
Ex Approvals
UL Recognized / cUL Recognized / cULus Recognized
Approval details
UL Recognized
mm²/AWG/kcmil
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
D
26-10
26-10
26-10
09/01/2016 Page 5 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Approvals
B
C
D
Nominal current IN
Nominal voltage UN
16 A
300 V
16 A
300 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B
C
D
mm²/AWG/kcmil
26-10
16 A
300 V
26-10
16 A
300 V
26-10
Nominal current IN
Nominal voltage UN
CSA
http://www.csagroup.org/us/en/services/testing-and-certification/certified-product-listing 13631
B
C
mm²/AWG/kcmil
26-10
16 A
300 V
26-10
16 A
300 V
Nominal current IN
Nominal voltage UN
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Bridge
Connection pin - VS - 3004207
Connection pin, Length: 1000 mm, Color: gray
DIN rail
09/01/2016 Page 6 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
09/01/2016 Page 7 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
09/01/2016 Page 8 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
09/01/2016 Page 9 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
09/01/2016 Page 10 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
Jumper
Plug-in bridge - FBS 2-6 - 3030336
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 10.7 mm, Number of positions: 2, Color: red
Plug-in bridge - FBS 3-6 - 3030242
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 16.9 mm, Number of positions: 3, Color: red
Plug-in bridge - FBS 4-6 - 3030255
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 23.1 mm, Number of positions: 4, Color: red
09/01/2016 Page 11 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Plug-in bridge - FBS 5-6 - 3030349
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 29.3 mm, Number of positions: 5, Color: red
Plug-in bridge - FBS 10-6 - 3030271
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 60.3 mm, Number of positions: 10, Color: red
Plug-in bridge - FBS 20-6 - 3030365
Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 122.3 mm, Number of positions: 20, Color: red
Plug-in bridge - FBSR 2-6 - 3033715
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 2, Color: red
Plug-in bridge - FBSR 3-6 - 3001594
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 3, Color: red
09/01/2016 Page 12 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Plug-in bridge - FBSR 4-6 - 3001595
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 4, Color: red
Plug-in bridge - FBSR 5-6 - 3001596
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 5, Color: red
Plug-in bridge - FBSR 10-6 - 3033716
Plug-in bridge, Pitch: 6.2 mm, Number of positions: 10, Color: red
Labeled terminal marker
Zack marker strip - ZB 5 CUS - 0824962
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017
Zack marker strip, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500,
Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
09/01/2016 Page 13 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field:
5.15 x 10.5 mm
Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up
to 100, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
Marker for terminal blocks - ZB 5,LGS:L1-N,PE - 1050415
Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, Mounting type: Snap
into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
Marker for terminal blocks - UC-TM 5 CUS - 0824581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 CUS - 0829595
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm
09/01/2016 Page 14 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Zack marker strip - ZB 6 CUS - 0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field:
6.15 x 10.5 mm
Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field:
6.15 x 10.5 mm
Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up
to 100, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N,
PE, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
09/01/2016 Page 15 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Marker for terminal blocks - ZB 6,LGS:U-N - 1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: U, V, W, N, GND, U, V,
W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 CUS - 0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 CUS - 0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker pen
Marker pen - X-PEN 0,35 - 0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
09/01/2016 Page 16 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Switching jumper
Feed-through connector - DMET 5X20 - 3032075
Feed-through metal in the shape of a 5 x 20 mm glass tube fuse insert for use in fuse terminal blocks.
Terminal marking
Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm
Marker for terminal blocks - UC-TM 5 - 0818108
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Mounting
type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm
Marker for terminal blocks - UCT-TM 5 - 0828734
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 5.2 mm, Lettering field: 4.6 x 10.5 mm
09/01/2016 Page 17 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Zack marker strip - ZB 6:UNBEDRUCKT - 1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Marker for terminal blocks - UC-TM 6 - 0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 6 - 0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
Test socket
Test adapter - PAI-4-FIX-5/6 BU - 3035975
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 OG - 3035974
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
09/01/2016 Page 18 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Test adapter - PAI-4-FIX-5/6 YE - 3035977
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 RD - 3035976
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GN - 3035978
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BK - 3035980
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 GY - 3035982
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
09/01/2016 Page 19 / 20
https://www.phoenixcontact.com/us/products/3214320
Fuse modular terminal block - UT 4-PE/L/HESI (5X20) - 3214320
Accessories
Test adapter - PAI-4-FIX-5/6 VT - 3035979
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 BN - 3035981
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Test adapter - PAI-4-FIX-5/6 WH - 3035983
4 mm test adapter, for terminal blocks with 5.2 mm and 6.2 mm pitch
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
09/01/2016 Page 20 / 20
相关型号：
©2020 ICPDF网 联系我们和版权申明