2900191 [PHOENIX]
Power/Signal Relay;
| 型号： | 2900191 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Power/Signal Relay 继电器 |
| 文件： | 总9页 (文件大小：123K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PLC-INTERFACE, consisting of DIN rail-mountable basic terminal block with screw connection and plug-in
miniature relay with power contact, 2 PDTs, input voltage: 12 V DC, UL/cUL: approved for use in Ex Zone Class I,
Div. 2
Key Commercial Data
Packing unit
1 STK
Weight per Piece (excluding packing)
Custom tariff number
Country of origin
76.0 g
85364190
Germany
Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
area
Utilization restriction
Dimensions
Width
Height
Depth
14 mm
80 mm
94 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (UL)
-40 °C ... 85 °C
Ambient temperature (storage/transport)
Coil side
Nominal input voltage UN
Typical input current at UN
Typical response time
12 V DC
33 mA
8 ms
07/15/2016 Page 1 / 9
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Technical data
Coil side
Typical release time
Protective circuit
10 ms
Reverse polarity protection Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage display
Yellow LED
0.4 W
Power dissipation for nominal condition
Contact side
Contact type
2 PDT
AgNi
Contact material
250 V AC/DC (The separating plate PLC-ATP should be installed for
voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in
adjacent modules. Potential bridging is then carried out with FBST 8-PLC...
or ...FBST 500...)
Maximum switching voltage
Minimum switching voltage
Min. switching current
5 V AC/DC (at 10 mA)
10 mA (At 5 V)
Maximum inrush current
15 A (300 ms)
Limiting continuous current
Interrupting rating (ohmic load) max.
6 A
140 W (at 24 V DC)
85 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
60 W (at 220 V DC)
1500 VA (for 250 V AC)
2 A (at 24 V, DC13)
0.2 A (at 250 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 250 V, AC15)
Switching capacity in acc. with DIN VDE 0660/IEC 60947
Connection data input side
Connection name
Coil side
Connection method
Screw connection
8 mm
Stripping length
Screw thread
M3
Conductor cross section solid
Conductor cross section flexible
Conductor cross section AWG
0.14 mm² ... 2.5 mm²
0.14 mm² ... 2.5 mm²
26 ... 14
Connection data output side
Connection name
Contact side
07/15/2016 Page 2 / 9
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Technical data
Connection data output side
Connection method
Screw connection
8 mm
Stripping length
Screw thread
M3
Conductor cross section solid
Conductor cross section flexible
Conductor cross section AWG
0.14 mm² ... 2.5 mm²
0.14 mm² ... 2.5 mm²
26 ... 14
General
Operating mode
100% operating factor
RT III (Relay)
Degree of protection
Mechanical service life
Flammability rating according to UL 94
Degree of pollution
3 x 107 cycles
V0
3
Overvoltage category
Designation
III
Standards/regulations
Standards/regulations
IEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulation
Degree of pollution
6 kV (safe isolation: control side / contact side)
3
Overvoltage category
Mounting position
III
any
Assembly instructions
In rows with zero spacing
Standards and Regulations
Designation
Standards/regulations
Standards/regulations
IEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulation
Degree of pollution
6 kV (safe isolation: control side / contact side)
3
Overvoltage category
III
V0
Flammability rating according to UL 94
Classifications
eCl@ss
eCl@ss 4.0
27371001
07/15/2016 Page 3 / 9
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Classifications
eCl@ss
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
eCl@ss 9.0
27371001
27371001
27371001
27371001
27371001
27371601
27371601
ETIM
ETIM 3.0
ETIM 4.0
ETIM 5.0
EC001504
EC001504
EC001437
UNSPSC
UNSPSC 6.01
UNSPSC 7.0901
UNSPSC 11
30211916
39121515
39121515
39121515
39121515
UNSPSC 12.01
UNSPSC 13.2
Accessories
Accessories
Bridge
Continuous plug-in bridge - FBST 500-PLC RD - 2966786
Continuous plug-in bridge, Length: 500 mm, Color: red
Continuous plug-in bridge - FBST 500-PLC BU - 2966692
Continuous plug-in bridge, Length: 500 mm, Color: blue
07/15/2016 Page 4 / 9
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Accessories
Continuous plug-in bridge - FBST 500-PLC GY - 2966838
Continuous plug-in bridge, Length: 500 mm, Color: gray
Single plug-in bridge - FBST 6-PLC RD - 2966236
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red
Single plug-in bridge - FBST 6-PLC BU - 2966812
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: blue
Single plug-in bridge - FBST 6-PLC GY - 2966825
Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: gray
Single plug-in bridge - FBST 8-PLC GY - 2967688
Single plug-in bridge, Length: 8 mm, Number of positions: 2, Color: gray
07/15/2016 Page 5 / 9
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Accessories
Single plug-in bridge - FBST 14-PLC BK - 2967691
Single plug-in bridge, Length: 14 mm, Number of positions: 2, Color: black
DIN rail
DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
07/15/2016 Page 6 / 9
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
Labeled terminal marker
07/15/2016 Page 7 / 9
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Accessories
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11
- 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field:
10.15 x 10.5 mm
Partition plate
Separating plate - PLC-ATP BK - 2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
Power module
Power terminal block - PLC-ESK GY - 2966508
Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
Screwdriver tools
Screwdriver - SZF 1-0,6X3,5 - 1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-
component grip, with non-slip grip
Terminal marking
07/15/2016 Page 8 / 9
https://www.phoenixcontact.com/us/products/2900191
Relay Module - PLC-RSC- 12DC/21-21/C1D2 - 2900191
Accessories
Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm
Spare parts
Single relay - REL-MR-12DC/21-21/C1D2 - 2906988
Plug-in miniature power relay, with power contact, 2 PDTs, 24 V DC input voltage, UL/cUL: approved for use in Ex Zone
Class 1 Div 2
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
07/15/2016 Page 9 / 9
相关型号：
2900317
Power/Signal Relay, SPDT, Momentary, 0.015A (Coil), 12VDC (Coil), 183.6mW (Coil), 36VDC (Contact), DC Input, DIN-Rail Mount,
PHOENIX
©2020 ICPDF网 联系我们和版权申明