2130033 [PHOENIX]
Modular Terminal Block, 309A, 150mm2;
| 型号： | 2130033 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Modular Terminal Block, 309A, 150mm2 端子和端子排 |
| 文件： | 总5页 (文件大小：97K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/pi/products/2130033
High Current Connectors - UHV150-AS/AS - 2130033
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Universal terminal block with bolt connection, cross section: 50 ... 150 mm², width: 46 mm, color: gray
The figure shows a combination
of versions UHV 150-AS/AS, UHV
150-KH/AS and UHV 150-KH/KH
Why buy this product
The comprehensive range of accessories, such as the connection rail for cross connection, ensures safe and user-friendly wiring of conductors
up to 240 mm²
Versions are available with a cable lug or direct connection and there is a mixed version of both connection methods
The UHV ... high-current connectors are available in several versions
Key Commercial Data
Packing unit
10 STK
GTIN
GTIN
4017918052812
Technical data
General
Number of levels
1
Number of connections
Nominal cross section
Color
2
150 mm²
gray
PA-F
V0
Insulating material
Flammability rating according to UL 94
Rated surge voltage
8 kV
3
Degree of pollution
Overvoltage category
Insulating material group
Maximum power dissipation for nominal condition
III
II
9.55 W
02/09/2018 Page 1 / 5
https://www.phoenixcontact.com/pi/products/2130033
High Current Connectors - UHV150-AS/AS - 2130033
Technical data
General
Connection in acc. with standard
Nominal current IN
IEC 60947-7-1
309 A
Maximum load current
309 A (with 150 mm² conductor cross section)
Nominal voltage UN
1000 V
Open side panel
No
Result of surge voltage test
Surge voltage test setpoint
Result of power-frequency withstand voltage test
Power frequency withstand voltage setpoint
Test passed
9.8 kV
Test passed
2.2 kV
Result of the test for mechanical stability of terminal points (5 x
conductor connection)
Test passed
Result of tight fit on support
Test passed
NS 32/NS 35
15 N
Tight fit on carrier
Setpoint
Result of voltage-drop test
Test passed
≤ 3.2 mV
Test passed
Test passed
150 mm²
18 kA
Requirements, voltage drop
Result of temperature-rise test
Short circuit stability result
Conductor cross section short circuit testing
Short-time current
Result of thermal test
Test passed
30 s
Proof of thermal characteristics (needle flame) effective duration
Relative insulation material temperature index (Elec., UL 746 B)
120 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE
0304-21))
125 °C
-40 °C
Static insulating material application in cold
Dimensions
Length
110 mm
46 mm
56 mm
Width
Height NS 35/15
Connection data
Connection method
Bolt connection
50 mm²
Conductor cross section flexible min.
Conductor cross section flexible max.
Cable lug connection according to standard
Min. cross section for cable lug connection
Max. cross section for cable lug connection
Hole diameter, min.
150 mm²
DIN 46234
10 mm²
150 mm²
13 mm
Cable lug width, max.
30 mm
Bolt diameter
12 mm
02/09/2018 Page 2 / 5
https://www.phoenixcontact.com/pi/products/2130033
High Current Connectors - UHV150-AS/AS - 2130033
Technical data
Connection data
Screw thread
M12
Tightening torque, min
Tightening torque max
Cable lug connection according to standard
Min. cross section for cable lug connection
Max. cross section for cable lug connection
Hole diameter, min.
25 Nm
30 Nm
DIN 46235
25 mm²
150 mm²
13 mm
34 mm
12 mm
M12
Cable lug width, max.
Bolt diameter
Screw thread
Tightening torque, min
Tightening torque max
Power rail
25 Nm
30 Nm
35 mm x 5 mm
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
V0
Flammability rating according to UL 94
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Pictogram
Circuit diagram
AS AS
Dimensional drawing
Schematic diagram
180
140
64
125
1
2
7
3
8
9
1 = high current connector, AS screw set on both sides
2 = high current connector, terminal sleeve KH on one side, screw set AS
on the other side
3 = high current connector, terminal sleeves KH on both sides, for direct
cable connection
02/09/2018 Page 3 / 5
https://www.phoenixcontact.com/pi/products/2130033
High Current Connectors - UHV150-AS/AS - 2130033
7 = separating plate
8 = end piece
9 = flat bracket
Dimensional drawing
110
Approvals
Approvals
Approvals
CSA / UL Recognized / RS / PRS / EAC / EAC
Ex Approvals
Approval details
CSA
http://www.csagroup.org/services-industries/product-listing/
13631
B
C
mm²/AWG/kcmil
2-300
275 A
600 V
2-300
275 A
600 V
Nominal current IN
Nominal voltage UN
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
C
FILE E 60425
B
mm²/AWG/kcmil
2-300
285 A
600 V
2-300
285 A
600 V
Nominal current IN
Nominal voltage UN
02/09/2018 Page 4 / 5
https://www.phoenixcontact.com/pi/products/2130033
High Current Connectors - UHV150-AS/AS - 2130033
Approvals
RS
http://www.rs-head.spb.ru/en/index.php
10.04059.250
TE/1824/880590/09
EAC-Zulassung
PRS
EAC
EAC
http://www.prs.pl/
7500651.22.01.00246
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com
02/09/2018 Page 5 / 5
©2020 ICPDF网 联系我们和版权申明