1847260 [PHOENIX]
Barrier Strip Terminal Block,;
| 型号： | 1847260 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Barrier Strip Terminal Block, 端子和端子排 |
| 文件： | 总5页 (文件大小：109K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/in/products/1847260
MKDSF 3/ 2-5,08 H1L - 1847260
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5.08 mm, number of positions: 2,
connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB
connection direction: 90 °, color: green
The figure shows a 2-position
version
Your advantages
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve
The latching on the side enables various numbers of positions to be combined
Key Commercial Data
Packing unit
1
GTIN
GTIN
4055626004174
85369010
Custom tariff number
Technical data
Item properties
Brief article description
Range of articles
Pitch
PCB terminal block
MKDSF 3
5.08 mm
Number of positions
Connection method
Drive form screw head
Screw thread
2
Screw connection with tension sleeve
Philipps recess with slotted Torx (H1L)
M3
Mounting type
Wave soldering
Pin layout
Linear pinning
01/18/2019 Page 1 / 5
https://www.phoenixcontact.com/in/products/1847260
MKDSF 3/ 2-5,08 H1L - 1847260
Technical data
Item properties
Number of levels
1
Electrical parameters
Rated current
24 A
400 V
4 kV
Rated insulation voltage (III/2)
Rated surge voltage (III/2)
Connection capacity
Conductor cross section solid
0.2 mm² ... 4 mm²
0.2 mm² ... 2.5 mm²
24 ... 12
Conductor cross section flexible
Conductor cross section AWG / kcmil
Conductor cross section flexible, with ferrule without plastic sleeve
Conductor cross section, flexible, with ferrule, with plastic sleeve
2 conductors with same cross section, solid
2 conductors with same cross section, flexible
0.25 mm² ... 2.5 mm²
0.25 mm² ... 2.5 mm²
0.2 mm² ... 1.5 mm²
0.2 mm² ... 1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve
0.25 mm² ... 0.75 mm²
0.5 mm² ... 1.5 mm²
2 conductors with same cross section, stranded, with TWIN ferrules with
plastic sleeve
Stripping length
Torque
8 mm
0.5 Nm ... 0.6 Nm
Material data - contact
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
Note
Contact material
Cu alloy
Surface characteristics
hot-dip tin-plated
Tin (4 - 8 µm Sn)
Tin (5 - 7 µm Sn)
Nickel (2 - 3 µm Ni)
Metal surface terminal point (top layer)
Metal surface soldering area (top layer)
Metal surface soldering area (middle layer)
Material data - housing
Insulating material
PA
Insulating material group
I
CTI according to IEC 60112
600
V0
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
850
775
125 °C
Dimensions for the product
Length [ l ]
Width [ w ]
Height [ h ]
18 mm
10.16 mm
16.1 mm
01/18/2019 Page 2 / 5
https://www.phoenixcontact.com/in/products/1847260
MKDSF 3/ 2-5,08 H1L - 1847260
Technical data
Dimensions for the product
Pitch
5.08 mm
12 mm
Height (without solder pin)
Solder pin [P]
4.1 mm
Pin dimensions
0.9 x 0.9 mm
5.08 mm
Dimension a
Dimensions for PCB design
Hole diameter
1.3 mm
Packaging information
Type of packaging
packed in cardboard
Pieces per package
50
Denomination packing units
Pcs.
General product information
Type of note
Note on application
For safe conductor connection, always adhere to a defined tightening
torque. Particularly in the case of PCB terminal blocks with two or
three positions, the individual solder pin for each contact point cannot
compensate for this. That is why the terminal blocks must be supported
during conductor connection (held with one hand, support on the
housing).
Note
Electrical tests
Rated current
24 A
400 V
4 kV
Rated insulation voltage (III/2)
Rated surge voltage (III/2)
Air clearances and creepage distances
Insulating material group
Voltage
I
250 V
250 V
400 V
630 V
4 kV
4 kV
4 kV
Rated insulation voltage (III/3)
Rated insulation voltage (III/2)
Rated insulation voltage (II/2)
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Standards and Regulations
Connection in acc. with standard
EN-VDE
Environmental Product Compliance
REACh SVHC
China RoHS
Lead 7439-92-1
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
01/18/2019 Page 3 / 5
https://www.phoenixcontact.com/in/products/1847260
MKDSF 3/ 2-5,08 H1L - 1847260
Classifications
eCl@ss
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
eCl@ss 9.0
27261100
27261100
27440401
27440401
27440401
ETIM
ETIM 4.0
ETIM 5.0
ETIM 6.0
EC002643
EC002643
EC002643
UNSPSC
UNSPSC 13.2
Approvals
39121432
Approvals
Approvals
CCA / SEV / EAC / cULus Recognized
Ex Approvals
Approval details
CCA
IK-3249
Nominal voltage UN
mm²/AWG/kcmil
250 V
4
SEV
https://www.electrosuisse.ch/de/meta/shop/produktezertifikate.html
IK-4199
Nominal voltage UN
Nominal current IN
mm²/AWG/kcmil
250 V
32 A
4
01/18/2019 Page 4 / 5
https://www.phoenixcontact.com/in/products/1847260
MKDSF 3/ 2-5,08 H1L - 1847260
Approvals
EAC
B.01742
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19870331
B
D
Nominal voltage UN
Nominal current IN
mm²/AWG/kcmil
300 V
10 A
250 V
15 A
30-12
30-12
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
01/18/2019 Page 5 / 5
相关型号：
©2020 ICPDF网 联系我们和版权申明