1690516 [PHOENIX]
Connector Accessory;型号: | 1690516 |
厂家: | PHOENIX CONTACT |
描述: | Connector Accessory 连接器 连接器支架 |
文件: | 总4页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Extract from the online
catalog
HC-EMV-KV-M25(9-16,5)
Order No.: 1690516
The illustration shows version HC-EMV-KV-M20
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1690516
EMC screw connection up to 5 bar, thread length: 7.5 mm, cable
diameter: 9.0 - 16.5 mm, WAF 29, screw connection: M25
Product notes
WEEE/RoHS-compliant since:
01/16/2007
Commercial data
GTIN (EAN)
4
017918
822583
sales group
D290
Pack
25 pcs.
74199990
http://
Customs tariff
Catalog page information
www.download.phoenixcontact.com
Please note that the data given
here has been taken from the
online catalog. For comprehensive
information and data, please refer
to the user documentation. The
General Terms and Conditions of
Use apply to Internet downloads.
Page 521 (PC-2009)
Technical data
General data
Cable gland material
Seal material
Nickel-plated brass
Neoprene
NBR
Material, O-ring
Wrench size, union nut
Wrench size, support
29 mm
29 mm
PHOENIX CONTACT Deutschland GmbH
http://www.phoenixcontact.de
Page 1 / 4
Jan 27, 2011
HC-EMV-KV-M25(9-16,5) Order No.: 1690516
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1690516
Thread type connection side 1
Length of the connecting thread
External cable diameter
M25
7.50 mm
9 mm ... 16.5 mm
9.00 mm ... 16.50 mm
10.00 Nm
Conductor sealing range
Tightening torque, union nut
Degree of protection
IP68, to 5 bar
-20 °C ... 100 °C
Ambient temperature (operation)
Certificates / Approvals
Certification
GOST
Diagrams/Drawings
Functional drawing
Assembly instructions:
Method 1
Slit the outer sheath after approximately 15 mm, but do not
remove it. Guide the cable through the screw connection and
then remove the outer sheath. Now withdraw the cable until a
connection is established between the conductor shield and the
contact spring.
Method 2
Push the braided shield back approximately 15 - 20 mm over
the outer sheath. Insert the cable into the screw connection
until a connection is established between the conductor shield
and the contact spring.
Method 3
Uncover about 10 mm of the braided shield and guide the cable
through the screw connection until a connection is established
between the conductor shield and the contact spring.
PHOENIX CONTACT Deutschland GmbH
http://www.phoenixcontact.de
Page 2 / 4
Jan 27, 2011
HC-EMV-KV-M25(9-16,5) Order No.: 1690516
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1690516
Dimensioned drawing
PHOENIX CONTACT Deutschland GmbH
http://www.phoenixcontact.de
Page 3 / 4
Jan 27, 2011
HC-EMV-KV-M25(9-16,5) Order No.: 1690516
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1690516
Address
PHOENIX CONTACT Deutschland GmbH
Flachsmarktstr. 8
32825 Blomberg,Germany
Phone +49 5235 3 12000
Fax +49 5235 3 41200
http://www.phoenixcontact.de
© 2010 Phoenix Contact
Technical modifications reserved;
PHOENIX CONTACT Deutschland GmbH
http://www.phoenixcontact.de
Page 4 / 4
Jan 27, 2011
相关型号:
©2020 ICPDF网 联系我们和版权申明