1689899 [PHOENIX]
D Subminiature Connector, 25 Contact(s), Male, Solder Terminal, ROHS COMPLIANT;
| 型号： | 1689899 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | D Subminiature Connector, 25 Contact(s), Male, Solder Terminal, ROHS COMPLIANT 连接器 |
| 文件： | 总12页 (文件大小：247K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
VARIOSUB D-SUB 25
Contact Inserts, Sleeve Housings
Introduction
VARIOSUB is a range of plug connectors specially
designed for signal and data technology in an industrial
environment with high degrees of protection,
temperatures and mechanical stress. The range is
characterized by the simple Push-Pull locking
mechanism, use of conventional D-SUB contact
inserts, IP 67 protection and EMC protection.
The VARIOSUB housings offer the space and
time-saving Push-Pull locking, which snaps in with a
noticeable click. Two integrated lamellar cable screw
connections for cable diameters of 5 - 13 mm provide
high cable strain relief.
When locked, the housings fulfill the requirements of
IP 67 protection, and require only little operating force
thanks to a special profile gasket.
Red snap-in profiles offer up to 16 coding
possibilities to avoid incorrect plugging. Marker
labeling is also provided for. An internal metal sleeve
and shroud on the panel mounting base provide
optional EMC protection. Simple logistics due to the
small number of individual components and high
functionality of the housings help to save costs and
increase availability. Mounting flanges on the panel
mounting base accept the contact inserts. This allows
internal and external wall mounting of the contact
inserts.
The male and female inserts in D-SUB 25 format
2
enable 25 data lines up to 0.35 mm conductor cross
2
section or 15 lines with 0.5 mm conductor cross
section to be connected. The connection points are
clearly numbered. This facilitates any start-up under
field conditions.
Industrial connectors are available for the sleeve and
mounting side. They are made with screw connection,
for soldering onto printed circuit boards, with a flat-
ribbon cable connection and for crimp contacts. For
currents up to 40 A or in combination with signal lines,
two versions are available as male and female
connectors. The use of these plug connectors saves
space on the inside of the device. The contacts are
equipped with U-grooves for manual solder connection
and cover the maximum possible cross section range.
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com
VARIOSUB D-SUB 25
Contact Inserts
Screw Connection
Description
Type
Order No.
16 89 78 9
16 89 77 6
Pcs./Pkt.
10
Male contact inserts,
with PCB and 25 x MPT 0,5 screw connections
VS-25-ST-DSUB/25-MPT-0,5
VS-25-BU-DSUB/25-MPT-0,5
Female contact inserts,
10
with PCB and 25 x MPT 0,5 screw connections
Technical data
Mechanical data
Insertion force per signal contact
Extraction force per signal contact
Insertion/withdrawal cycles
Material and surfaces
Insulating body
[N]
[N]
≤ 3.3
≤ 2.2
≥ 200
PBTP
Cu alloy
Ni/Au
Contact material
Contact surface
Electrical data
Max. amperage
Operating voltage
[A]
[V]
1
63
Contact resistance per contact pair
Insulation resistance
Thermal and climatice data
Temperature range
[mΩ]
[MΩ]
≤ 2.5
≥ 5000
[°C]
- 20 to + 70
Phoenix Contact page 2 of 12
VARIOSUB D-SUB 25
Contact Inserts
Solder Connection
Description
Type
Order No.
16 89 89 9
Pcs./Pkt.
10
Male contact inserts,
VS-25-ST-DSUB-EG
solder connection,
25-pos., with straight solder pins, with hole
Female contact inserts,
solder connection,
25-pos., with straight solder pins, with hole
VS-25-BU-DSUB-EG
VS-25-ST-DSUB-ER
VS-25-BU-DSUB-ER
16 89 90 9
16 89 87 3
16 89 88 6
10
10
10
Male contact inserts,
solder connection,
25-pos., with angled solder pins, with thread
Female contact inserts,
solder connection,
25-pos., with angled solder pins, with thread
Technical data
Mechanical data
Insertion force per signal contact
Extraction force per signal contact
Insertion/withdrawal cycles
Material and surfaces
Insulating body
[N]
[N]
≤ 3.3
≤ 2.2
≥ 200
PBTP
Cu alloy
Ni/Au
Contact material
Contact surface
Electrical data
Max. amperage
Operating voltage
[A]
[V]
1
63
Contact resistance per contact pair
Insulation resistance
Thermal and climatice data
Temperature range
[mΩ]
[MΩ]
≤ 2.5
≥ 5000
[°C]
- 55 to + 125
Phoenix Contact page 3 of 12
VARIOSUB D-SUB 25
Contact Inserts
Flat-Ribbon Cable Connection
Description
Type
Order No.
16 89 91 2
Pcs./Pkt.
10
Male contact inserts,
flat-ribbon cable connection,
25-pos., with holes
VS-25-ST-DSUB-FK
Female contact inserts,
flat-ribbon cable connection,
25-pos., with holes
VS-25-BU-DSUB-FK
16 89 92 5
10
Technical data
Mechanical data
Insertion force per signal contact
Extraction force per signal contact
Insertion/withdrawal cycles
Material and surfaces
Insulating body
[N]
[N]
≤ 3.3
≤ 2.2
≥ 200
PBTP
Cu alloy
Ni/Au
Contact material
Contact surface
Electrical data
Max. amperage
Operating voltage
[A]
[V]
1
63
Contact resistance per contact pair
Insulation resistance
Thermal and climatice data
Temperature range
[mΩ]
[MΩ]
≤ 2.5
≥ 5000
[°C]
- 55 to + 125
Phoenix Contact page 4 of 12
VARIOSUB D-SUB 25
Contact Inserts
Crimp Connection
Description
Type
Order No.
16 89 93 8
Pcs./Pkt.
10
Male contact carrier,
crimp contact carriers,
25-pos., with thread
VS-25-ST-DSUB-CD-G
Female contact carrier,
crimp contact carriers,
25-pos., with thread
VS-25-BU-DSUB-CD-G
VS-25-ST-DSUB-CD-B
VS-25-BU-DSUB-CD-B
16 89 94 1
16 89 95 4
16 89 96 7
10
10
10
Male contact carrier,
crimp contact carriers,
25-pos., with holes
Female contact carrier,
crimp contact carriers,
25-pos., with holes
Accessories
Turned male crimp contacts,
surface gold-plated
AWG 24-20
AWG 28-24
VS-ST-CD-1,0/14,8/0,5
VS-ST-CD-1,0/14,8/0,2
16 88 96 8
16 88 97 1
30
30
Turned female crimp contacts,
surface gold-plated
AWG 24-20
AWG 28-24
VS-BU-CD-1,0/14,4/0,5
VS-BU-CD-1,0/14,4/0,2
16 88 98 4
16 88 99 7
Technical data
Mechanical data
Insertion force per signal contact
Extraction force per signal contact
Insertion/withdrawal cycles
Electrical data
[N]
[N]
≤ 3.3
≤ 2.2
≥ 200
Max. amperage
Operating voltage
[A]
[V]
1
63
Insulation resistance
[MΩ]
≥ 5000
Thermal and climatice data
Temperature range
[°C]
- 55 to + 125
Phoenix Contact page 5 of 12
VARIOSUB D-SUB 25
Contact Inserts with
High Current Contacts
Solder Connection
Description
Type
Order No.
16 89 97 0
16 89 98 3
Pcs./Pkt.
10
Male contact carrier,
for power contacts, 5-pos.
VS-25-ST-DSUB-5P
VS-25-BU-DSUB-5P
Female contact carrier,
10
for power contacts, 5-pos.
Accessories
Male power contact for 20 A,
with U-groove solder connection
VS-ST-LK-3,6/22,4/2,6
VS-BU-LK-3,6/22,8/2,6
VS-ST-LK-3,6/22,4/4,6
VS-BU-LK-3,6/22,8/4,6
16 88 24 3
16 88 25 6
16 88 26 9
16 88 27 2
30
30
30
30
Female power contact for 20 A,
with U-groove solder connection
Male power contact for 40 A,
with U-groove solder connection
Female power contact for 40 A,
with U-groove solder connection
Technical data
Mechanical data
Insertion/withdrawal cycles
Material and surfaces
Insulating body
≥ 500
PBTP GV (UL 94 V0)
Steel
Housing
Housing surface
Contact material
Tin-plated
Cu alloy
Contact surface
0.8 µm gold over nickel
Electrical data
Max. amperage, power contacts
Operating voltage
[A]
[V]
20 or 40
125
Contact resistance per contact pair
Insulation resistance
Specific contact resistance
Specific internal insulation resistance
Thermal and climatice data
Temperature range
[mΩ]
[MΩ]
[Ωcm]
[KV/mm]
≤ 2.5
≥ 5000
1016
50
[°C]
- 20 to + 80
Note:
The power contacts must be ordered separately since they are not included
in the scope of supply of the contact carriers of combi contact inserts.
Phoenix Contact page 6 of 12
VARIOSUB D-SUB 25
Contact Inserts with High Current
and Signal Contacts
Solder Connection
Description
Type
Order No.
16 89 99 6
Pcs./Pkt.
10
Male contact carrier,
VS-25-ST-DSUB-3P-10S
for 3 power contacts,
with 10 signal contacts, U-groove solder connection
Female contact carrier,
VS-25-BU-DSUB-3P-10S
16 90 00 8
10
for 3 power contacts,
with 10 signal contacts, U-groove solder connection
Accessories
Male power contact for 20 A,
with U-groove solder connection
VS-ST-LK-3,6/22,4/2,6
VS-BU-LK-3,6/22,8/2,6
VS-ST-LK-3,6/22,4/4,6
VS-BU-LK-3,6/22,8/4,6
16 88 24 3
16 88 25 6
16 88 26 9
16 88 27 2
30
30
30
30
Female power contact for 20 A,
with U-groove solder connection
Male power contact for 40 A,
with U-groove solder connection
Female power contact for 40 A,
with U-groove solder connection
Technical data
Mechanical data
Insertion/withdrawal cycles
Material and surfaces
Insulating body
≥ 500
PBTP GV (UL 94 V0)
Steel
Housing
Housing surface
Contact material
Tin-plated
Cu alloy
Contact surface
0.8 µm gold over nickel
Electrical data
Max. amperage, signal contacts
Max. amperage, power contacts
Operating voltage
[A]
[A]
[V]
5
20 or 40
125
Thermal and climatice data
Temperature range
[°C]
- 20 to + 80
Note:
The power contacts must be ordered separately since they are not included
in the scope of supply of the contact carriers of combi contact inserts.
Phoenix Contact page 7 of 12
VARIOSUB D-SUB 25
Sleeve Housings
Description
Type
Order No.
16 89 79 2
Pcs./Pkt.
Plastic sleeve housing,
with Push-Pull locking for panel mounting base,
with 2 inclined M 20 lamellar screw connections,
with 2 screws for fastening the contact inserts
VS-25-T-2 M20
5
Accessories
M 20 cap nut with seal
for conductor diameters from 5-13 mm
VS-M20 (5-13)
VC-PG 11 BS
CP-HCC 4
16 52 12 7
16 88 14 6
16 00 02 7
5
Cover cap,
for vacant M 20 screw connections
10
Coding profile,
made of red plastic, mounted in the panel mounting base and sleeve
housing (4 profiles for each plug connector) see Fig. 1
100
Marker labels,
for snapping in
ZBN 18: UNBEDRUCKT
VS-25-TI-2EMV
VS-25-SD
28 09 12 8
16 89 80 2
16 52 21 1
10
5
EMC internal sleeve,
with connection clamp and screw for contacting 2 conductor screens
Protective cover,
for covering the contact insert in the panel mounting frame
or sleeve housing
5
Technical data
Insulation material
PA
V0
Inflammability class acc. to UL 94
Degree of protection
IP 67
Temperature range
[°C]
- 20 to + 80
I
II
III
IV
V
VI
ST BU
VII
ST BU
VIII
ST BU
IX
ST BU
X
ST BU
XI
ST BU
XII
ST BU
XIII
ST BU
XIV
ST BU
XV
ST BU
XVI
ST BU
ST BU
67,5
81
24
ST BU
ST BU
ST BU
ST BU
Figure 1: Coding for housings with one contact insert
Phoenix Contact page 8 of 12
VS-25-T-2 M20
VARIOSUB D-SUB 25
Panel Mounting Frames
Description
Type
Order No.
16 89 75 0
Pcs./Pkt.
5
Plastic panel mounting frame,
VS-25-A
with radially-acting profile gasket mounted, with enclosed self-adhesive
flat gasket (without mounting screws on the device side)
Accessories
EMC shroud,
for contacting a D-SUB contact insert on the mounting side with the
outer wall of the housing
VS-25-A-EMV-S
VS-25-SD
16 89 76 3
16 52 21 1
5
5
Protective cover,
for covering the contact insert in the panel mounting frame
or sleeve housing
Technical data
Insulation material
PA
V0
Inflammability class acc. to UL 94
Degree of protection
IP 67
Temperature range
[°C]
- 20 to + 80
17,6
75,5
62
ø 3,4
ø 3
17,6
46,5
66,4
Panel cutout: VS-25-A
Dimensional drawing: VS-25-A
Phoenix Contact page 9 of 12
VARIOSUB D-SUB 25
Panel Mounting Frames with
Gender Changer
The illustration shows the 9-pos. version
Order No.
Description
Type
Pcs./Pkt.
Panel mounting frame,
with gender changer
Female / Female
Male / Male
VS-25-A-GC-BU/BU
VS-25-A-GC-ST/ST
16 89 73 4
16 89 74 7
5
5
Panel mounting frame,
with gender changer
Technical data
Insulation material
Inflammability class acc. to UL 94
Degree of protection
PA
V0
IP 67
Temperature range
[°C]
- 20 to + 80
A
B
17,6
17,6
VS-25-A-GC…
76.0
66.6
A [mm]
B [mm]
Panel cutout: VS-25-A-GC...
Dimensional drawing: VS-25-A-GC…
Phoenix Contact page 10 of 12
VARIOSUB D-SUB 25
Couplings
The illustration shows the 9-pos. version
Order No.
Description
Type
Pcs./Pkt.
Coupling,
25-pos.,
Female / Female
Male / Male
VS-25-KU-BU/BU
VS-25-KU-ST/ST
16 89 67 9
16 89 68 2
5
5
Coupling,
25-pos.
Technical data
Insulation material
Inflammability class acc. to UL 94
Degree of protection
PA
V0
IP 67
Temperature range
[°C]
- 20 to + 80
A
VS-25-KU…
76.0
A [mm]
Dimensional drawing: VS-25-KU…
Phoenix Contact page 11 of 12
VARIOSUB D-SUB 25
Plug Connector Sets
Description
Type
Order No.
16 52 19 8
16 52 20 8
Pcs./Pkt.
Set VARIOSUB D-SUB 25, standard version
for D-SUB 25 contact inserts, with Push-Pull locking, IP 67
VS-25-SET-STD
VS-25-SET-EMV
1
1
Set VARIOSUB D-SUB 25, EMC version
for D-SUB 25 contact inserts, with Push-Pull locking, IP 67
Accessories
Protective cover,
for covering the contact insert in the panel mounting frame
or sleeve housing
VS-25-SD
16 52 21 1
5
Technical data
Insulation material
PA
V0
Inflammability class acc. to UL 94
Degree of protection
Temperature range
IP 67
[°C]
- 20 to + 80
17,6
17,6
Panel cutout of panel mounting frame
75,5
62
ø 3,4
ø 3
46,5
66,4
67,5
81
24
Dimensional drawing of panel mounting frame
Dimensional drawing of sleeve
Phoenix Contact page 12 of 12
相关型号：
1689909
D Subminiature Connector, 25 Contact(s), Female, Solder Terminal, Socket, ROHS COMPLIANT
PHOENIX
1689925
D Subminiature Connector, 25 Contact(s), Female, IDC Terminal, Socket, ROHS COMPLIANT
PHOENIX
1689941
D Subminiature Connector, 25 Contact(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT
PHOENIX
1689967
D Subminiature Connector, 25 Contact(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT
PHOENIX
©2020 ICPDF网 联系我们和版权申明