1441697 [PHOENIX]
SACC-SQ-M12FS-8CON-20/0 5;型号: | 1441697 |
厂家: | PHOENIX CONTACT |
描述: | SACC-SQ-M12FS-8CON-20/0 5 连接器 |
文件: | 总6页 (文件大小:91K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/us/products/1441697
Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type socket, 8-pos., M12, A-coded, front/square flange mounting, with 0.5 m TPE litz wire,
8 x 0.25 mm²
Why buy this product
4 x fixing hole, 3.2 mm
■
■
■
■
■
■
■
■
With form seal for M3 screws
Pre-assembled with litz wires for immediate use
Customer-specific assemblies and litz wire lengths available
Sealed on the litz wire side for optimum leak-tightness
All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design
For high transmission safety: shield connection to the housing with optional EMC nut
SPEEDCON fast locking system reduces cabling times
Key Commercial Data
Packing unit
1 STK
Custom tariff number
Country of origin
85444290
Germany
Technical data
Dimensions
Length of cable
0.5 m
Ambient conditions
Ambient temperature (operation)
Degree of protection
-25 °C ... 85 °C (Plug / socket)
IP67
General
08/16/2016 Page 1 / 6
https://www.phoenixcontact.com/us/products/1441697
Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697
Technical data
General
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
Note
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
Rated voltage
2 A
30 V
Rated surge voltage
Number of positions
Insulation resistance
Coding
0.8 kV
8
≥ 100 MΩ
A - standard
Standards/regulations
Status display
M12 connector IEC 61076-2-101
No
Overvoltage category
Degree of pollution
Connection method
Insertion/withdrawal cycles
Torque
II
3
Individual wires
> 100
3 Nm ... 4 Nm (Installation-side)
Front mounting Square flange 20 mm side length
Mounting type
Material
Flammability rating according to UL 94
Contact material
V0
CuZn
Contact surface material
Contact carrier material
Material of grip body
Material, knurls
Ni/Au
PA 66
Zinc die-cast, nickel-plated
Zinc die-cast, nickel-plated
FKM
Sealing material
Cable
Cable type
TPE litz wire
Conductor cross section
AWG signal line
0.25 mm²
24
Conductor structure signal line
Core diameter including insulation
Thickness, insulation
Wire colors
14x 0.15 mm
1.15 mm ±0.07 mm
0.21 mm (Core insulation)
Brown, blue, white, gray, pink, green, yellow, red
TPE
Material conductor insulation
Conductor material
Tin-plated Cu litz wires
M12 connector IEC 61076-2-101
08/16/2016 Page 2 / 6
Standards/specifications
https://www.phoenixcontact.com/us/products/1441697
Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697
Technical data
Cable
Insulation resistance
≥ 20 MΩ*km
Conductor resistance
Nominal voltage, cable
Test voltage, cable
≤ 57.6 mΩ/m
300 V
2000 V AC
Ambient temperature (operation)
-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Standards and Regulations
Standard designation
M12 connector
IEC 61076-2-101
V0
Standards/regulations
Flammability rating according to UL 94
Drawings
Schematic diagram
Dimensional drawing
20
14
L
18,5
Pin assignment M12 socket, 8-pos., A-coded, view
female side
Ø3,2
12,5
Circuit diagram
1
2
3
4
5
6
7
8
WH
BN
GN
YE
GY
PK
BU
RD
Contact assignment of the M12 plug and the M12 socket
Classifications
eCl@ss
eCl@ss 4.0
27140815
08/16/2016 Page 3 / 6
https://www.phoenixcontact.com/us/products/1441697
Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697
Classifications
eCl@ss
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
eCl@ss 9.0
27140815
27143423
27143423
27279220
27440103
27440103
27440102
ETIM
ETIM 4.0
ETIM 5.0
EC002061
EC002061
UNSPSC
UNSPSC 6.01
UNSPSC 7.0901
UNSPSC 11
31251501
31251501
31251501
31251501
39121413
UNSPSC 12.01
UNSPSC 13.2
Approvals
Approvals
Approvals
UL Recognized / EAC / cULus Recognized / EAC
Ex Approvals
Approvals submitted
Approval details
08/16/2016 Page 4 / 6
https://www.phoenixcontact.com/us/products/1441697
Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697
Approvals
UL Recognized
mm²/AWG/kcmil
26-20
2 A
Nominal current IN
Nominal voltage UN
30 V
EAC
cULus Recognized
mm²/AWG/kcmil
22
Nominal current IN
Nominal voltage UN
2 A
30 V
EAC
Accessories
Accessories
Protective cap
Screw plug - PROT-M12 - 1680539
An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors
Screw plug - PROT-M12 SH - 1503302
An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type
connectors
08/16/2016 Page 5 / 6
https://www.phoenixcontact.com/us/products/1441697
Flush-type connector - SACC-SQ-M12FS-8CON-20/0,5 - 1441697
Accessories
Screw plug - PROT-M12 FB - 1555538
M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type
connectors for the food industry
Phoenix Contact 2016 © - all rights reserved
http://www.phoenixcontact.com
08/16/2016 Page 6 / 6
相关型号:
©2020 ICPDF网 联系我们和版权申明