1437122 [PHOENIX]
Circular Connector;型号: | 1437122 |
厂家: | PHOENIX CONTACT |
描述: | Circular Connector 连接器 |
文件: | 总4页 (文件大小:83K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/us/products/1437122
Flush-type connector - SACC-DSI-MS-12CON-M12/0,5 SCO - 1437122
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Sensor/actuator flush-type plug, 12-pos., M12 SPEEDCON, rear/screw mounting with M12 thread, with 0.5 m
halogen-free TPE litz wire, 12 x 0.14 mm²
Why buy this product
Pre-assembled with litz wires for immediate use
Customer-specific assemblies and litz wire lengths available
Sealed on the litz wire side for optimum leak-tightness
Standard pin assignments for signal and power transmission with a uniform design-in design
For high transmission safety: shield connection to the housing with optional EMC nut
SPEEDCON fast locking system reduces cabling times
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4046356449625
20.000 g
Weight per Piece (excluding packing)
Custom tariff number
Country of origin
85444290
Germany
Technical data
Dimensions
Length of cable
0.5 m
Ambient conditions
Ambient temperature (operation)
Degree of protection
-25 °C ... 85 °C (Plug / socket)
IP67
03/27/2017 Page 1 / 4
https://www.phoenixcontact.com/us/products/1437122
Flush-type connector - SACC-DSI-MS-12CON-M12/0,5 SCO - 1437122
Technical data
General
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
Note
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
Rated voltage
1.5 A
30 V
Rated surge voltage
Number of positions
Insulation resistance
Coding
0.8 kV
12
≥ 100 MΩ
A - standard
Standards/regulations
Status display
M12 connector IEC 61076-2-101
No
Overvoltage category
Degree of pollution
Connection method
Insertion/withdrawal cycles
Torque
II
3
Individual wires
> 100
3 Nm ... 4 Nm (Installation-side)
Rear mounting M12 x 1 With flat nut
Mounting type
Material
Flammability rating according to UL 94
Contact material
V0
CuZn
Contact surface material
Contact carrier material
Material, knurls
Au
PA 66
Zinc die-cast, nickel-plated
NBR
Sealing material
Cable
Cable type
TPE litz wire
0.14 mm²
Conductor cross section
AWG signal line
26
Conductor structure signal line
Core diameter including insulation
Thickness, insulation
7x 0.16 mm
1.1 mm ±0.05 mm
0.21 mm (Core insulation)
Brown, blue, white, green, pink, yellow, black, gray, red, violet, gray/pink,
red/blue
Wire colors
Material conductor insulation
Standards/specifications
Insulation resistance
TPE
M12 connector IEC 61076-2-101
≥ 20 MΩ*km
03/27/2017 Page 2 / 4
https://www.phoenixcontact.com/us/products/1437122
Flush-type connector - SACC-DSI-MS-12CON-M12/0,5 SCO - 1437122
Technical data
Cable
Conductor resistance
≤ 57.6 mΩ/m
Nominal voltage, cable
Test voltage, cable
300 V
2000 V AC
Ambient temperature (operation)
-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Standards and Regulations
Standard designation
M12 connector
IEC 61076-2-101
V0
Standards/regulations
Flammability rating according to UL 94
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Dimensional drawing
Dimensional drawing
max.4,0
Housing cutout for M12 fastening thread, mounting panel with thread
11+0,1
Housing cutout for M12 fastening thread, mounting panel with feed-through
hole (alternative with surface as protection against rotation)
Schematic diagram
Dimensional drawing
3
2
11
10
20
500
4
1
5
9
12
6
8
7
Pin assignment M12 male connector, 12-pos.,
male side view
2,8
14
15
M12 flush-type connector
03/27/2017 Page 3 / 4
https://www.phoenixcontact.com/us/products/1437122
Flush-type connector - SACC-DSI-MS-12CON-M12/0,5 SCO - 1437122
Circuit diagram
1
BN
2
BU
3
WH
GN
PK
4
5
6
YE
7
BK
8
GY
9
RD
10
11
12
VT
GYPK
RDBU
Contact assignment of the M12 plug
Approvals
Approvals
Approvals
cULus Recognized / EAC
Ex Approvals
Approval details
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E221474-20140616
mm²/AWG/kcmil
26
Nominal current IN
Nominal voltage UN
1.5 A
30 V
EAC
B.00767
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
03/27/2017 Page 4 / 4
相关型号:
©2020 ICPDF网 联系我们和版权申明