SA57700-15D-G [NXP]
IC BRUSH DC MOTOR CONTROLLER, 0.2 A, PDSO5, 1.50 MM, PLASTIC, SOT-23, 5 PIN, Motion Control Electronics;型号: | SA57700-15D-G |
厂家: | NXP |
描述: | IC BRUSH DC MOTOR CONTROLLER, 0.2 A, PDSO5, 1.50 MM, PLASTIC, SOT-23, 5 PIN, Motion Control Electronics 电动机控制 光电二极管 |
文件: | 总11页 (文件大小:100K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
SA57700-XX
DC vibrator motor driver
Product data
2002 Mar 25
Philips
Semiconductors
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
GENERAL DESCRIPTION
The SA57700 allows for a constant vibration force while operating
from a –0.3 V to 12.0 V input range and delivering up to 150 mA.
The Ground Current is only 80 µA typical independent of the load.
The output is turned off when input voltage drops below detection
voltage at 2.1 V. To minimize battery drain, (ON = low) SA57700
supply current drops to 0.1 µA max. Other features include thermal
shutdown protection, short circuit protection. The SA57700 is
available in a 5-pin SOT23 package.
FEATURES
• Compact package for small mounting area
• Thermal Shutdown
• Wide Operating Temperature Range: –20 to 75°C
• Three voltage options: 1.3, 1.5, 1.8 V
• Good ripple rejection: 70 dB typical
• Preset output voltage from 1.2 V to 2.0 V in 0.1 V step
• High precision output voltage: ±3%
APPLICATIONS
• Output current capacity: 200 mA
• Wireless Handset Vibrator Motor Drivers
• Low consumption current: 0.1 mA max. (when off)
• Pager Vibrator Motor Drivers
• Low temperature drift co-efficient to V
: ±100 ppm/°C
OUT
SIMPLIFIED APPLICATION DIAGRAM
V
V
OUT
IN
5
1
4
3
SA57700
C
C
OUT
IN
ON
4.7 µF
(AL–electrolytic)
4.7 µF
(AL–electrolytic)
GND
2
SL01645
Figure 1. Simplified application diagram.
2
2002 Mar 25
853-2333 27919
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
ORDERING INFORMATION
PACKAGE
TEMPERATURE
RANGE
TYPE NUMBER
NAME
DESCRIPTION
5-pin small outline plastic
SA57700-XX
SOT23–5
–40 °C to +85 °C
NOTE:
The device has one detection voltage option, indicated by the XX on
Part number marking
the ‘Type number’.
The package is marked with a four letter code in the first line to the
right of the logo. The first three letters designate the product. The
fourth letter, represented by ‘x’, is a date tracking code. The
remaining two or three lines of characters are internal manufacturing
codes.
XX
DETECT VOLTAGE (Typical)
–13
–15
–18
1.3 V
1.5 V
1.8 V
Part number
SA57700-13
SA57700-15
SA57700-18
Marking
A H K x
A H M x
A H R x
PIN CONFIGURATION
V
V
IN
ON
5
4
1
SA57700
GND
2
OUT
NC
3
SL01646
Figure 2. Pin configuration.
PIN DESCRIPTION
PIN
SYMBOL
DESCRIPTION
1
ON
Active-HIGH ON/OFF input. Apply a logic HIGH to deliver power to the load. Apply a logic LOW to
disconnect the load and reduce the supply current to 0.1 µA max.
2
GND
Ground. This pin also functions as a heatsink. Solder to large pads or the circuit board ground plane to
maximize thermal dissipation.
3
4
NC
Not connected.
V
OUT
Regulator Output. Fixed 1.3 V and sources up to 150 mA. Bypass with 4.7 µF, <0.2 W typical ESR capacitor
to GND
5
V
IN
Regulator Input. Supply voltage can range up to 12 V. Bypass with 4.7 µF to GND.
MAXIMUM RATINGS
SYMBOL
PARAMETER
MIN.
–20
MAX.
+75
UNIT
°C
T
opr
Operating temperature
Storage temperature
Supply voltage
T
stg
–40
+125
+12
°C
V
CC
–0.3
V
I
Output current
200
mA
mW
OUT
P
D
Power dissipation
150
3
2002 Mar 25
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
DC ELECTRICAL CHARACTERISTICS
T
amb
= 25 °C, V = 2.6 V, unless otherwise specified.
CC
SYMBOL
PARAMETER
Output voltage
CONDITIONS
= 3.5 V; I = 30 mA
MIN.
TYP.
MAX.
+3%
240
160
0.1
UNIT
V
V
O
V
IN
V
IN
V
IN
V
IN
V
IN
V
IN
–3%
V
O
O
Iccq1
Iccq2
Iccq3
∆V1
No-Load input current
Input current 1 (OFF)
Input current 2 (OFF)
Line regulation
= 3.5 V; I = 0 mA
120
80
µA
O
= 1.8 V; V = 1.6 V
µA
ON
= 3.5 V; V = 0 V
µA
ON
= 3 V; ~5 V I = 30 mA
10
30
20
mV
mV
O
∆V2
Load regulation
= 3.5 V; I = 0~100 mA
60
O
∆V /DT
Vo temperature coefficient
Tj = –20 ~+75 °C; V = 3.5 V;
100
ppm/
O
IN
I
O
= 30 mA
°C
RR
Ripple rejection
V
V
= 3.5V; f = 120 Hz
55
70
dB
IN
= 1 VP–P; I = 30 mA
RIPPLE
O
V
VIN low detector voltage
VIN high detector voltage
V
V
= H³L; I = 30 mA
2.0
2.1
2.6
200
2.2
2.8
V
V
LDET
IN
IN
O
V
HDET
= L³H; I = 30 mA
O
∆VLDET/∆T
VIN low detector voltage temperature
coefficient
T = –20~+75 °C; V = H³L;
ppm/
°C
j
IN
I
= 30 mA
O
Vonh
High threshold voltage
ON terminal current
V
= H³L, L³H
= 1.6 V
500
5
mV
µA
V
IN
I
V
IN
10
ON
ON
ON High threshold voltage
ON Low threshold voltage
1.6
V +0.3
IN
H
ON
–0.3
–0.3
0.4
V
L
4
2002 Mar 25
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
detection. Turn output off with the ON terminal in order to suppress
consumption current completely.
TECHNICAL DESCRIPTION
ON pin
Drive ON high to provide power to the load. Drive ON low to disable
power to the load and reduce the supply current to maximum
Regulator stability and capacitor selection
Phase compensation is made for securing stable operation even if
the load current varies. For this reason, an output capacitor with
good frequency characteristics is needed. Set it as close to the
circuit as possible and make the wiring as short as possible. Use a
4.7 µF capacitor on the input and 4.7 µF capacitor on the output of
the SA57700. For a fast load transient response requires a larger
output capacitor value.
0.1 µA. Assume V is greater than VHDET 2.6 V, when ON goes
IN
HIGH, output current rises to the current limit until V
reaches
OUT
regulation. While in regulation the output current drops to a lower
value sufficient to maintain motor speed. When ON goes LOW, the
regulator turns off, however, inertial energy in the motor exhibits a
slow output voltage decline. The SA57700 is designed to withstand
this condition with no negative effects. Connect ON terminal to V
when it is not used.
IN
Current Limit
The SA57700 includes a current limiter that monitors and controls
the pass transistor’s gate voltage, estimating the output current and
limiting it to about 270 mA. The output can be shorted to ground for
an infinite time period without damaging the part.
V
pin
IN
Input voltage drops below VLDET 2.1 V, which sets the output
voltage stop regulating while ON input is HIGH. The consumption
current flows even when output voltage is OFF due to input voltage
V
OUT
4
5
*n
I
O
I
O
n
THERMAL
PROTECT
1
2
SL01647
Figure 3. Functional diagram.
5
2002 Mar 25
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
TYPICAL PERFORMANCE CURVES
60
40
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0
20
0
–20
–40
–60
0
4
0
20
40
60
80
100
120
140
25
75
125
175
OUTPUT CURRENT (mA)
TEMPERATURE (°C)
SL01671
SL01674
Figure 4. Load regulation.
Figure 7. Thermal shutdown.
10
5
800
700
600
500
400
300
200
100
0
ALONE
ON BOARD
57 31 0.8mm
0
–5
–10
6
8
10
12
0
25
50
75
100
125
SL01675
V
(V)
TEMPERATURE (°C)
IN
SL01672
Figure 5. Line regulation.
Figure 8. Power dissipation.
1.50
1.25
1.00
0.75
0.50
0.25
0
100
200
300
OUTPUT CURRENT (mA)
SL01673
Figure 6. Current limit.
6
2002 Mar 25
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
Timing diagram
The timing diagram shown in Figure 9 depicts the operation of the device.
2.6 V
2.1 V
V
IN
0 V
H
L
ON
1.3 V
0 V
V
OUT
SL01676
Figure 9. Timing diagram.
7
2002 Mar 25
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
APPLICATION INFORMATION
V
V
OUT
IN
5
1
4
3
SA57700
C
C
OUT
IN
ON
4.7 µF
(AL–electrolytic)
4.7 µF
(AL–electrolytic)
GND
2
SL01645
Figure 10. Typical application circuit.
V
V
OUT
IN
A
A
5
1
4
3
SA57700
ON
4.7 µF
4.7 µF
V
GND
2
SL01677
Figure 11. Test circuit.
8
2002 Mar 25
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
PACKING METHOD
The SA57700 is packed in reels, as shown in Figure 12.
GUARD
BAND
TAPE
TAPE DETAIL
REEL
ASSEMBLY
COVER TAPE
CARRIER TAPE
BARCODE
LABEL
BOX
SL01305
Figure 12. Tape and reel packing method.
9
2002 Mar 25
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
SOT23-5: plastic small outline package; 5 leads; body width 1.5 mm
1.2
1.0
0.55
0.41
0.22
0.08
3.00
2.70
1.70
1.50
0.55
0.35
0.025
1.35
10
2002 Mar 25
Philips Semiconductors
Product data
DC vibrator motor driver
SA57700-XX
Data sheet status
Product
status
Definitions
[1]
Data sheet status
[2]
Objective data
Development
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
Preliminary data
Product data
Qualification
Production
This data sheet contains data from the preliminary specification. Supplementary data will be
published at a later date. Philips Semiconductors reserves the right to change the specification
without notice, in order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply.
Changes will be communicated according to the Customer Product/Process Change Notification
(CPCN) procedure SNW-SQ-650A.
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Koninklijke Philips Electronics N.V. 2002
Contact information
All rights reserved. Printed in U.S.A.
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
Date of release: 07-02
9397 750 10097
For sales offices addresses send e-mail to:
sales.addresses@www.semiconductors.philips.com.
Document order number:
Philips
Semiconductors
相关型号:
SA57700-18D
IC BRUSH DC MOTOR CONTROLLER, 0.2 A, PDSO5, 1.50 MM, PLASTIC, SOT-23, 5 PIN, Motion Control Electronics
NXP
SA57700-18D-G
IC BRUSH DC MOTOR CONTROLLER, 0.2 A, PDSO5, 1.50 MM, PLASTIC, SOT-23, 5 PIN, Motion Control Electronics
NXP
©2020 ICPDF网 联系我们和版权申明