74HCT4052N [NXP]
Dual 4-channel analog multiplexer, demultiplexer; 双路4通道模拟多路复用器，解复用器
| 型号： | 74HCT4052N |
| 厂家： | 
NXP |
| 描述： | Dual 4-channel analog multiplexer, demultiplexer |
| 文件： | 总27页 (文件大小：179K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
DATA SHEET
74HC4052; 74HCT4052
Dual 4-channel analog multiplexer,
demultiplexer
Product specification
2004 Nov 11
Supersedes data of 2003 May 16
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
FEATURES
DESCRIPTION
• Wide analog input voltage range from −5 V to +5 V
• Low ON-resistance:
The 74HC4052 and 74HCT4052 are high-speed Si-gate
CMOS devices and are pin compatible with the
HEF4052B. They are specified in compliance with JEDEC
standard no. 7A.
– 80 Ω (typical) at VCC − VEE = 4.5 V
– 70 Ω (typical) at VCC − VEE = 6.0 V
– 60 Ω (typical) at VCC − VEE = 9.0 V
The 74HC4052 and 74HCT4052 are dual 4-channel
analog multiplexers or demultiplexers with common select
logic. Each multiplexer has four independent
• Logic level translation: to enable 5 V logic to
communicate with ±5 V analog signals
inputs/outputs (pins nY0 to nY3) and a common
input/output (pin nZ). The common channel select logics
include two digital select inputs (pins S0 and S1) and an
active LOW enable input (pin E). When pin E = LOW, one
of the four switches is selected (low-impedance ON-state)
with pins S0 and S1. When pin E = HIGH, all switches are
in the high-impedance OFF-state, independent of pins S0
and S1.
• Typical “break before make” built in
• Complies with JEDEC standard no. 7A
• ESD protection:
– HBM EIA/JESD22-A114-B exceeds 2000 V
– MM EIA/JESD22-A115-A exceeds 200 V.
• Specified from −40 °C to +85 °C and −40 °C to +125 °C.
VCC and GND are the supply voltage pins for the digital
control inputs (pins S0, S1, and E). The VCC to GND
ranges are 2.0 V to 10.0 V for 74HC4052 and
4.5 V to 5.5 V for 74HCT4052. The analog inputs/outputs
(pins nY0 to nY3 and nZ) can swing between VCC as a
positive limit and VEE as a negative limit. VCC − VEE may
not exceed 10.0 V.
APPLICATIONS
• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating.
For operation as a digital multiplexer/demultiplexer, VEE is
connected to GND (typically ground).
FUNCTION TABLE
INPUT(1)
CHANNEL BETWEEN
E
L
L
L
L
H
S1
L
S0
L
nY0 and nZ
nY1 and nZ
nY2 and nZ
nY3 and nZ
none
L
H
L
H
H
X
H
X
Note
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care.
2004 Nov 11
2
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
QUICK REFERENCE DATA
VEE = GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns.
TYPICAL
UNIT
SYMBOL
PARAMETER
turn-on time E or Sn to Vos
turn-off time E or Sn to Vos
CONDITIONS
74HC4052 74HCT4052
tPZH/tPZL
CL = 15 pF; RL = 1 kΩ; 28
VCC = 5 V
18
13
ns
ns
t
PHZ/tPLZ
CL = 15 pF; RL = 1 kΩ; 21
VCC = 5 V
CI
input capacitance
3.5
3.5
57
5
pF
pF
pF
pF
CPD
CS
power dissipation capacitance per switch notes 1 and 2
57
5
maximum switch capacitance
independent (Y)
common (Z)
12
12
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + Σ[(CL + CS) × VCC2 × fo] where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
CS = maximum switch capacitance in pF;
VCC = supply voltage in Volts;
N = number of inputs switching;
Σ[(CL + CS) × VCC2 × fo] = sum of the outputs.
2. For 74HC4052 the condition is VI = GND to VCC
For 74HCT4052 the condition is VI = GND to VCC − 1.5 V.
ORDERING INFORMATION
PACKAGE
TYPE NUMBER
TEMPERATURE
RANGE
PINS
PACKAGE
MATERIAL
CODE
74HC4052D
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
−40 °C to +125 °C
16
16
16
16
16
16
16
16
16
SO16
SO16
plastic
plastic
plastic
plastic
plastic
plastic
plastic
plastic
plastic
SOT109-3
SOT109-3
SOT338-1
SOT338-1
SOT38-9
74HCT4052D
74HC4052DB
74HCT4052DB
74HC4052N
SSOP16
SSOP16
DIP16
74HCT4052N
74HC4052PW
74HC4052BQ
74HCT4052BQ
DIP16
SOT38-9
TSSOP16
DHVQFN16
DHVQFN16
SOT403-1
SOT763-1
SOT763-1
2004 Nov 11
3
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
PINNING
PIN
SYMBOL
DESCRIPTION
1
2
2Y0
2Y2
2Z
independent input or output
independent input or output
common input or output
independent input or output
independent input or output
enable input (active LOW)
negative supply voltage
ground (0 V)
3
4
2Y3
2Y1
E
5
6
7
VEE
GND
S1
8
9
select logic input
10
11
12
13
14
15
16
S0
select logic input
1Y3
1Y0
1Z
independent input or output
independent input or output
common input or output
independent input or output
independent input or output
positive supply voltage
1Y1
1Y2
VCC
terminal 1
index area
handbook, halfpage
2Y0
2Y2
2Z
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
V
CC
2
3
4
5
6
7
15
14
13
12
11
10
2Y2
1Y2
1Y1
1Z
1Y2
1Y1
1Z
2Z
2Y3
2Y1
E
4052
2Y3
2Y1
E
1Y0
1Y3
S0
4052
1Y0
1Y3
S0
(1)
V
CC
V
EE
V
EE
001aac117
S1
GND
Transparent top view
MNB039
(1) The die substrate is attached to this pad using conductive die
attach material. It can not be used as a supply pin or input.
Fig.1 Pin configuration DIP16, SO16 and
(T)SSOP16.
Fig.2 Pin configuration DHVQFN16.
2004 Nov 11
4
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
handbook, halfpage
10
0
0
3
13
1Z
handbook, halfpage
4 ×
9
6
1
1Y0
1Y1
1Y2
1Y3
2Y0
2Y1
2Y2
2Y3
G4
12
14
15
11
1
S0
S1
10
9
1
5
MDX
0
1
2
3
3
2
4
5
12
14
15
11
2
E
6
4
13
2Z
3
MNB040
MNB041
Fig.3 Logic symbol.
Fig.4 IEC logic symbol.
V
CC
16
13
1Z
12
1Y0
14
1Y1
15
1Y2
10
9
S0
S1
E
11
1Y3
LOGIC
LEVEL
CONVERSION
1 - OF - 4
DECODER
1
2Y0
5
2Y1
6
2
2Y2
4
2Y3
3
2Z
8
7
MNB042
GND
V
EE
Fig.5 Functional diagram.
5
2004 Nov 11
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
nYn
V
V
EE
CC
V
V
CC
CC
V
V
EE
CC
V
nZ
EE
from
logic
MNB043
Fig.6 Schematic diagram (one switch).
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to VEE = GND
(ground = 0 V); note 1.
SYMBOL
VCC
PARAMETER
supply voltage
CONDITIONS
MIN.
−0.5
MAX.
+11.0
UNIT
V
IIK
input diode current
switch diode current
switch current
VI < −0.5 V or VI > VCC + 0.5 V
VS < −0.5 V or VS > VCC + 0.5 V
−0.5 V < VS < VCC + 0.5 V
−
±20
±20
±25
±20
±50
+150
500
100
mA
mA
mA
mA
mA
°C
ISK
−
IS
−
IEE
VEE current
−
ICC; IGND
Tstg
Ptot
PS
VCC or GND current
storage temperature
power dissipation
power dissipation per switch
−
−65
−
Tamb = −40 °C to +125 °C; note
mW
mW
−
Notes
1. To avoid drawing VCC current out of pins nZ, when switch current flows in pins nYn, the voltage drop across the
bidirectional switch must not exceed 0.4 V. If the switch current flows into pins nZ, no VCC current will flow out of
pins nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at pins nYn and nZ may
not exceed VCC or VEE
.
2. For DIP16 packages: above 70 °C derate linearly with 12 mW/K.
For SO16 packages: above 70 °C derate linearly with 8 mW/K.
For SSOP16 and TSSOP16 packages: above 60 °C derate linearly with 5.5 mW/K.
For DHVQFN16 packages: above 60 °C derate linearly with 4.5 mW/K.
2004 Nov 11
6
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
RECOMMENDED OPERATING CONDITIONS
74HC4052
74HCT4052
UNIT
SYMBOL
PARAMETER
supply voltage
CONDITIONS
MIN.
TYP. MAX. MIN.
TYP. MAX.
VCC
see Figs 7 and 8
V
CC − GND
CC − VEE
2.0
5.0
5.0
−
10.0
4.5
5.0
5.5
V
V
2.0
10.0
VCC
VCC
+85
2.0
5.0
−
10.0
VCC
VCC
+85
V
VI
input voltage
GND
VEE
−40
−40
GND
VEE
−40
V
VS
switch voltage
−
−
V
Tamb
operating ambient
temperature
see DC and AC
characteristics per
device
+25
−
+25
−
°C
+125 −40
+125 °C
tr, tf
input rise and fall times
VCC = 2.0 V
VCC = 4.5 V
−
−
−
−
6.0
6.0
6.0
6.0
1000
500
400
250
−
−
−
−
6.0
6.0
6.0
6.0
500
500
500
500
ns
ns
ns
ns
VCC = 6.0 V
VCC = 10.0 V
MNB044
MNB045
12
handbook, halfpage
12
handbook, halfpage
V
− GND
CC
(V)
V
− GND
(V)
CC
10
8
8
operating area
6
operating area
4
4
2
0
0
0
4
8
V
12
(V)
0
4
8
12
− V (V)
EE
− V
EE
V
CC
CC
Fig.7 Guaranteed operating area as a function of
the supply voltages for 74HC4052.
Fig.8 Guaranteed operating area as a function of
the supply voltages for 74HCT4052.
2004 Nov 11
7
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
DC CHARACTERISTICS
Family 74HC4052
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input; Vos is the output voltage at pins nZ or nYn,
whichever is assigned as an output; voltages are referenced to GND (ground = 0 V).
TEST CONDITIONS
SYMBOL
PARAMETER
MIN. TYP. MAX. UNIT
OTHER
VCC (V) VEE (V)
Tamb = −40 °C to +85 °C; note 1
VIH
HIGH-level input
voltage
2.0
−
−
−
−
−
−
−
−
0
0
1.5
1.2
−
V
V
V
V
V
V
V
V
4.5
6.0
9.0
2.0
4.5
6.0
9.0
6.0
10.0
3.15 2.4
−
4.2
6.3
−
3.2
4.7
0.8
2.1
2.8
4.3
−
−
−
VIL
LOW-level input
voltage
0.5
1.35
1.8
2.7
−
−
−
ILI
input leakage current
VI = VCC or GND
−
±1.0 µA
±2.0 µA
−
−
IS(OFF)
analog switch
VI = VIH or VIL;
OFF-state current
VS = VCC − VEE; see Fig.9
per channel
all channels
10.0
10.0
10.0
0
0
0
−
−
−
−
−
−
±1.0 µA
±2.0 µA
±2.0 µA
IS(ON)
ICC
analog switch
ON-state current
VI = VIH or VIL;
VS = VCC − VEE; see Fig.10
quiescent supply
current
VI = VCC or GND;
6.0
0
0
−
−
−
−
80.0 µA
160.0 µA
Vis = VEE or VCC
;
10.0
Vos = VCC or VEE
2004 Nov 11
8
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
TEST CONDITIONS
SYMBOL
PARAMETER
MIN. TYP. MAX. UNIT
OTHER
V
CC (V) VEE (V)
Tamb = −40 °C to +125 °C
VIH
HIGH-level input
voltage
2.0
4.5
6.0
9.0
2.0
4.5
6.0
9.0
6.0
10.0
−
−
−
−
−
−
−
−
0
0
1.5
3.15
4.2
6.3
−
−
−
−
−
−
−
−
−
−
−
−
V
V
V
V
V
V
V
V
−
−
−
VIL
LOW-level input
voltage
0.5
1.35
1.8
2.7
−
−
−
ILI
input leakage current
VI = VCC or GND
−
±1.0 µA
±2.0 µA
−
IS(OFF)
analog switch
VI = VIH or VIL;
OFF-state current
VS = VCC − VEE; see Fig.9
per channel
all channels
10.0
10.0
10.0
0
0
0
−
−
−
−
−
−
±1.0 µA
±2.0 µA
±2.0 µA
IS(ON)
ICC
analog switch
ON-state current
VI = VIH or VIL;
VS = VCC − VEE; see Fig.10
quiescent supply
current
VI = VCC or GND;
6.0
0
0
−
−
−
−
160
µA
Vis = VEE or VCC
;
10.0
320.0 µA
Vos = VCC or VEE
Note
1. All typical values are measured at Tamb = 25 °C.
2004 Nov 11
9
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
Family 74HCT4052
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input; Vos is the output voltage at pins nZ or nYn,
whichever is assigned as an output; voltages are referenced to GND (ground = 0 V).
TEST CONDITIONS
SYMBOL
PARAMETER
MIN. TYP. MAX. UNIT
OTHER
VCC (V) VEE (V)
Tamb = −40 °C to +85 °C; note 1
VIH
VIL
HIGH-level input
voltage
4.5 to 5.5
4.5 to 5.5
5.5
−
−
0
2.0
−
1.6
1.2
−
−
V
V
LOW-level input
voltage
0.8
ILI
input leakage current
VI = VCC or GND
−
±1.0 µA
IS(OFF)
analog switch
VI = VIH or VIL;
OFF-state current
VS = VCC − VEE; see Fig.9
per channel
all channels
10.0
10.0
10.0
0
0
0
−
−
−
−
−
−
±1.0 µA
±2.0 µA
±2.0 µA
IS(ON)
ICC
analog switch
ON-state current
VI = VIH or VIL;
VS = VCC − VEE; see Fig.10
quiescent supply
current
VI = VCC or GND;
5.5
5.0
0
−
−
−
−
80.0 µA
160.0 µA
Vis = VEE or VCC
;
−5.0
Vos = VCC or VEE
∆ICC
additional quiescent
supply current per
input
VI = VCC − 2.1 V; other inputs 4.5 to 5.5 0
at VCC or GND
−
45
202.5 µA
Tamb = −40 °C to +125 °C
VIH
HIGH-level input
voltage
4.5 to 5.5
4.5 to 5.5
5.5
−
−
0
2.0
−
−
−
−
−
V
V
VIL
LOW-level input
voltage
0.8
ILI
input leakage current
VI = VCC or GND
−
±1.0 µA
IS(OFF)
analog switch
VI = VIH or VIL;
OFF-state current
VS = VCC − VEE; see Fig.9
per channel
all channels
10.0
10.0
10.0
0
0
0
−
−
−
−
−
−
±1.0 µA
±2.0 µA
±2.0 µA
IS(ON)
ICC
analog switch
ON-state current
VI = VIH or VIL;
VS = VCC − VEE; see Fig.10
quiescent supply
current
VI = VCC or GND;
5.5
5.0
0
−
−
−
−
160.0 µA
320.0 µA
Vis = VEE or VCC
;
−5.0
Vos = VCC or VEE
∆ICC
additional quiescent
supply current per
input
VI = VCC − 2.1 V; other inputs 4.5 to 5.5 0
at VCC or GND
−
−
220.5 µA
Note
1. All typical values are measured at Tamb = 25 °C.
2004 Nov 11
10
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
LOW
(from select input)
nYn
or V
nZ
A
A
V = V
V
= V
or V
EE CC
I
CC
EE
O
V
EE
MNB048
Fig.9 Test circuit for measuring OFF-state current.
HIGH
(from select input)
nYn
nZ
A
V = V
or V
V
(open circuit)
O
I
EE
CC
V
EE
MNB049
Fig.10 Test circuit for measuring ON-state current.
11
2004 Nov 11
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
Resistance RON for 74HC4052 and 74HCT4052
Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input; see notes 1 and 2; see Fig.11.
TEST CONDITIONS
SYMBOL
PARAMETER
MIN. TYP. MAX. UNIT
OTHER
VCC (V) VEE (V) IS (µA)
Tamb = −40 °C to +85 °C; note 3
RON(peak) ON-resistance
(peak)
Vis = VCC to VEE
VI = VIH or VIL
;
2.0
4.5
6.0
4.5
2.0
4.5
6.0
4.5
2.0
4.5
6.0
4.5
2.0
4.5
6.0
4.5
0
100
1000
1000
1000
100
1000
1000
1000
100
1000
1000
1000
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
0
100
90
70
150
80
70
60
150
90
80
65
−
225
200
165
−
0
−4.5
RON(rail)
ON-resistance (rail) Vis = VEE
;
0
VI = VIH or VIL
0
175
150
130
−
0
−4.5
0
Vis = VCC
;
VI = VIH or VIL
0
200
175
150
−
0
−4.5
0
∆RON
maximum
Vis = VCC to VEE
VI = VIH or VIL
;
;
ON-resistance
difference between
any two channels
0
−
9
−
0
−
8
−
−4.5
−
6
−
Tamb = −40 °C to +125 °C
RON(peak) ON-resistance
(peak)
Vis = VCC to VEE
VI = VIH or VIL
2.0
4.5
6.0
4.5
2.0
4.5
6.0
4.5
2.0
4.5
6.0
4.5
0
100
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
0
1000
1000
1000
100
270
240
195
−
0
−4.5
0
RON(rail)
ON-resistance (rail) Vis = VEE
;
VI = VIH or VIL
0
1000
1000
1000
100
210
180
160
−
0
−4.5
0
Vis = VCC
;
VI = VIH or VIL
0
1000
1000
1000
240
210
180
0
−4.5
Notes
1. For 74HC4052: VCC − GND or VCC − VEE = 2.0, 4.5, 6.0 and 9.0 V; for 74HCT4052: VCC − GND = 4.5 and 5.5 V,
CC − VEE = 2.0, 4.5, 6.0 and 9.0 V.
V
2. When supply voltages (VCC − VEE) near 2.0 V the analog switch ON-resistance becomes extremely non-linear. When
using a supply of 2 V, it is recommended to use these devices only for transmitting digital signals.
3. All typical values are measured at Tamb = 25 °C.
2004 Nov 11
12
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
HIGH
(from select input)
V
nYn
nZ
I
V
= 0 to V
− V
CC EE
is
is
V
EE
MNB046
Fig.11 Test circuit for measuring RON
.
MNB047
100
handbook, halfpage
(1)
R
ON
(Ω)
80
(2)
(3)
60
40
20
0
0
1.8
3.6
5.4
7.2
9
V
(V)
is
Vis = 0 V to VCC − VEE
(1) VCC = 4.5 V
(2) VCC = 6 V
(3) VCC = 9 V
Fig.12 Typical RON as a function of input voltage Vis.
2004 Nov 11
13
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
AC CHARACTERISTICS
Type 74HC4052
GND = 0 V; tr = tf = 6 ns; CL = 50 pF.
TEST CONDITIONS
OTHER VCC (V) VEE (V)
SYMBOL
PARAMETER
MIN. TYP. MAX. UNIT
Tamb = −40 °C to +85 °C; note 1
tPHL/tPLH propagation delay Vis to Vos RL = ∞; see Fig.19
2.0
4.5
6.0
4.5
2.0
4.5
6.0
4.5
0
−
−
−
−
−
−
−
−
−
−
−
−
14
5
75
15
13
10
405
81
69
58
315
63
54
48
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
0
0
4
−4.5
0
4
tPZH/tPZL
turn-on time E, Sn to Vos
turn-off time E, Sn to Vos
RL = ∞; see Figs 20,
22 and 21
105
38
30
26
74
27
22
22
0
0
−4.5
0
tPHZ/tPLZ
RL = 1 kΩ; see Figs 20, 2.0
22 and 21
4.5
0
6.0
4.5
0
−4.5
Tamb = −40 °C to +125 °C
tPHL/tPLH propagation delay Vis to Vos RL = ∞; see Fig.19
2.0
4.5
6.0
4.5
2.0
4.5
6.0
4.5
0
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
90
18
15
12
490
98
83
69
375
75
64
57
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
0
0
−4.5
0
tPZH/tPZL
turn-on time E, Sn to Vos
turn-off time E, Sn to Vos
RL = ∞; see Figs 20,
22 and 21
0
0
−4.5
0
tPHZ/tPLZ
RL = 1 kΩ; see Figs 20, 2.0
22 and 21
4.5
0
6.0
4.5
0
−4.5
Note
1. All typical values are measured at Tamb = 25 °C.
2004 Nov 11
14
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
Type 74HCT4052
GND = 0 V; tr = tf = 6 ns; CL = 50 pF.
TEST CONDITIONS
OTHER VCC (V) VEE (V)
SYMBOL
PARAMETER
MIN. TYP. MAX. UNIT
Tamb = −40 °C to +85 °C; note 1
tPHL/tPLH propagation delay Vis to Vos RL = ∞; see Fig.19
4.5
4.5
0
−
−
−
−
−
−
5
15
10
88
60
63
48
ns
ns
ns
ns
ns
ns
−4.5
0
4
tPZH/tPZL
turn-on time E, Sn to Vos
turn-off time E, Sn to Vos
RL = 1 kΩ; see Figs 20, 4.5
22 and 21
41
28
26
21
4.5
−4.5
0
tPHZ tPLZ
RL = 1 kΩ; see Figs 20, 4.5
22 and 21
4.5
−4.5
Tamb = −40 °C to +125 °C
tPHL/tPLH propagation delay Vis to Vos RL = ∞; see Fig.19
4.5
4.5
0
−
−
−
−
−
−
−
−
−
−
−
−
18
12
105
72
75
57
ns
ns
ns
ns
ns
ns
−4.5
0
tPZH/tPZL
turn-on time E, Sn to Vos
turn-off time E, Sn to Vos
RL = 1 kΩ; see Figs 20, 4.5
22 and 21
4.5
−4.5
0
tPHZ/tPLZ
RL = 1 kΩ; see Figs 20, 4.5
22 and 21
4.5
−4.5
Note
1. All typical values are measured at Tamb = 25 °C.
2004 Nov 11
15
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
Type 74HC4052 and 74HCT4052
Recommended conditions and typical values; GND = 0 V; Tamb = 25 °C; CL = 50 pF. Vis is the input voltage at pins nYn
or nZ, whichever is assigned as an input. Vos is the output voltage at pins nYn or nZ, whichever is assigned as an
output.
TEST CONDITIONS
SYMBOL
PARAMETER
TYP. UNIT
Vis(p-p)
(V)
OTHER
VCC (V) VEE (V)
dsin
sine-wave distortion
f = 1 kHz; RL = 10 kΩ;
see Fig.13
4.0
8.0
4.0
8.0
2.25
4.5
−2.25
−4.5
−2.25
−4.5
−2.25
−4.5
−2.25
−4.5
0
0.04
0.02
0.12
0.06
−50
−50
−60
−60
110
220
%
%
f = 10 kHz; RL = 10 kΩ;
see Fig.13
2.25
4.5
%
%
αOFF(feedthr)
switch OFF signal
feed-through
RL = 600 Ω; f = 1 MHz;
see Figs 14 and 15
note 1 2.25
4.5
dB
dB
dB
dB
mV
mV
αct(s)
crosstalk between two
switches/multiplexers
RL = 600 Ω; f = 1 MHz;
see Fig.16
note 1 2.25
4.5
Vct(p-p)
crosstalk voltage
between control and
any switch
RL = 600 Ω; f = 1 MHz; E or Sn,
square-wave between VCC and
GND, tr = tf = 6 ns; see Fig.17
−
4.5
4.5
−4.5
(peak-to-peak value)
fmax
minimum frequency
response (−3dB)
RL = 50 Ω; see Figs 13 and 18
note 2 2.25
4.5
−2.25
−4.5
−
170
180
5
MHz
MHz
pF
CS
maximum switch
capacitance
independent (Y)
common (Z)
−
−
−
−
−
12
pF
Notes
1. Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600 Ω).
2. Adjust input voltage Vis to 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50 Ω).
10 µF
nYn/nZ
nZ/nYn
V
V
os
is
R
C
dB
L
L
channel
ON
GND
MNB052
Fig.13 Test circuit for measuring sine-wave distortion and minimum frequency response.
16
2004 Nov 11
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
0.1 µF
nYn/nZ
nZ/nYn
V
is
V
os
R
C
dB
L
L
channel
OFF
GND
MNB053
Fig.14 Test circuit for measuring switch OFF signal feed-through.
0
− 0
− 0
− 0
− 0
− 00
0
0
0
0
0
0
Test conditions: VCC = 4.5 V; GND = 0 V; VEE = −4.5 V; RL = 50 Ω; Rsource = 1 kΩ.
Fig.15 Typical switch OFF signal feed-through as a function of frequency.
R
0.1 µF
L
nYn/nZ
nZ/nYn
nYn/nZ
nZ/nYn
V
V
is
os
dB
R
C
L
R
R
C
L
L
L
L
channel
ON
channel
OFF
GND
GND
MNB054
(a)
(b)
(b) channel OFF condition.
(a) channel ON condition.
Fig.16 Test circuits for measuring crosstalk between any two switches/multiplexers.
17
2004 Nov 11
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
The crosstalk is defined as follows
(oscilloscope output):
V
L
Sn or E
DUT
V
CC
CC
2R
2R
L
nYn/nZ
nZ/nYn
V(p−p)
2R
2R
C
L
oscilloscope
L
L
GND
V
EE
MNB055
Fig.17 Test circuit for measuring crosstalk between control and any switch.
5
0
−5
5
0
0
0
0
0
0
Test conditions: VCC = 4.5 V; GND = 0 V; VEE = −4.5 V; RL = 50 Ω; Rsource = 1 kΩ.
Fig.18 Typical frequency response.
18
2004 Nov 11
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
AC WAVEFORMS
V
handbook, halfpage
I
50%
V
input
is
GND
t
t
PLH
PHL
V
OH
50%
V
output
os
V
OL
MNB056
Fig.19 Waveforms showing the input (Vis) to output (Vos) propagation delays.
t
t
f
r
90%
V
E, Sn input
M
10%
t
t
PZL
PLZ
50%
V
output
output
os
os
10%
t
t
PHZ
PZH
90%
50%
V
switch
ON
switch
ON
switch
OFF
MNB057
For 74HC4052: VM = 50 %; VI = GND to VCC
.
For 74HCT4052: VM = 1.3 V; VI = GND to 3 V.
Fig.20 Waveforms showing the turn-on and turn-off times.
19
2004 Nov 11
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
t
W
amplitude
0 V
90%
negative
input pulse
V
M
10%
t
(t )
f
t
t
(t )
THL
TLH
THL
r
t
(t )
r
(t )
f
TLH
amplitude
90%
10%
positive
input pulse
V
M
0 V
t
MNB059
W
tr and tf
fmax; PULSE WIDTH OTHER
FAMILY
AMPLITUDE
VM
74HC4052
VCC
50 %
1.3 V
< 2 ns
< 2 ns
6 ns
6 ns
74HCT4052
3.0 V
Fig.21 Input pulse definitions.
V
switch
CC
open
V
V
CC is
R
L
V
V
O
I
PULSE
GENERATOR
D.U.T.
C
R
L
T
GND
V
EE
MNB058
TEST
SWITCH
Vis
tPZH
tPZL
tPHZ
tPLZ
VEE
VCC
VEE
VCC
VEE
VCC
VEE
VCC
open
other
pulse
Definitions for test circuit:
RL = load resistance
CL = load capacitance including jig and probe capacitance.
RT = termination resistance should be equal to the output impedance ZO of the pulse generator.
tr = tf = 6 ns; when measuring fmax, there is no constraint to tr and tf with 50 % duty factor.
Fig.22 Test circuit for measuring AC performance.
20
2004 Nov 11
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
PACKAGE OUTLINES
DIP16: plastic dual in-line package; 16 leads (300 mil)
SOT38-9
M
E
D
A
2
A
A
L
1
c
e
b
1
w
M
Z
(e )
1
M
H
b
b
2
16
9
pin 1 index
E
1
8
0
5
10 mm
scale
DIMENSIONS (mm dimensions are derived from the original inch dimensions)
(1)
Z
A
min.
A
2
A
(1)
(1)
1
w
UNIT
mm
b
b
b
c
D
E
e
e
L
M
M
H
1
1
2
E
max.
max.
max.
1.65
1.40
0.51
0.41
1.14
0.76
0.36
0.20
19.3
18.8
6.45
6.24
3.81
2.92
8.23
7.62
9.40
8.38
4.32
0.17
0.38
3.56
2.54
0.1
7.62
0.3
0.254
0.01
0.76
0.065 0.020 0.045 0.014
0.055 0.016 0.030 0.008
0.76
0.74
0.254
0.246
0.150 0.324
0.115 0.300
0.37
0.33
inches
0.015
0.14
0.03
Note
1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
97-07-24
03-03-12
SOT38-9
2004 Nov 11
21
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
SO16: plastic small outline package; 16 leads; body width 3.9 mm; body thickness 1.47 mm
SOT109-3
D
E
A
X
v
c
y
H
M
A
E
Z
16
9
A
2
A
(A )
3
A
1
pin 1 index
θ
L
p
L
1
8
e
w
M
detail X
b
p
0
2.5
5 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
A
(1)
(1)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
p
v
w
y
Z
θ
1
2
3
p
E
max.
0.25
0.10
1.55
1.40
0.49
0.36
0.25
0.19
10.0
9.8
4.0
3.8
6.2
5.8
1.0
0.4
0.7
0.3
mm
1.27
0.05
1.05
0.041
1.75
0.25
0.01
0.25
0.01
0.25
0.1
8o
0o
0.010 0.061
0.004 0.055
0.019 0.0100 0.39
0.014 0.0075 0.38
0.16
0.15
0.244
0.228
0.039
0.016
0.028
0.012
inches
0.069
0.01 0.004
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
98-12-23
03-02-19
SOT109-3
MS-012AC
2004 Nov 11
22
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm
SOT338-1
D
E
A
X
c
y
H
v
M
A
E
Z
9
16
Q
A
2
A
(A )
3
A
1
pin 1 index
θ
L
p
L
8
1
detail X
w
M
b
p
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(1)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
Q
v
w
y
Z
θ
p
p
1
2
3
E
max.
8o
0o
0.21
0.05
1.80
1.65
0.38
0.25
0.20
0.09
6.4
6.0
5.4
5.2
7.9
7.6
1.03
0.63
0.9
0.7
1.00
0.55
mm
2
0.25
0.65
1.25
0.2
0.13
0.1
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-19
SOT338-1
MO-150
2004 Nov 11
23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
D
E
A
X
c
y
H
v
M
A
E
Z
9
16
Q
(A )
3
A
2
A
A
1
pin 1 index
θ
L
p
L
1
8
detail X
w
M
b
p
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(2)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
Q
v
w
y
Z
θ
1
2
3
p
E
p
max.
8o
0o
0.15
0.05
0.95
0.80
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3
6.6
6.2
0.75
0.50
0.4
0.3
0.40
0.06
mm
1.1
0.65
0.25
1
0.2
0.13
0.1
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-18
SOT403-1
MO-153
2004 Nov 11
24
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
16 terminals; body 2.5 x 3.5 x 0.85 mm
SOT763-1
B
A
D
A
A
1
E
c
detail X
terminal 1
index area
C
terminal 1
index area
e
1
y
y
e
b
v
M
C
C
A
B
C
1
w
M
2
7
L
1
8
9
E
h
e
16
15
10
D
h
X
0
2.5
scale
5 mm
DIMENSIONS (mm are the original dimensions)
(1)
A
(1)
(1)
UNIT
A
1
b
c
E
e
e
1
y
D
D
E
L
v
w
y
1
h
h
max.
0.05 0.30
0.00 0.18
3.6
3.4
2.15
1.85
2.6
2.4
1.15
0.85
0.5
0.3
mm
0.05
0.1
1
0.2
0.5
2.5
0.1
0.05
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
02-10-17
03-01-27
SOT763-1
- - -
MO-241
- - -
2004 Nov 11
25
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer,
demultiplexer
74HC4052; 74HCT4052
DATA SHEET STATUS
DATA SHEET
STATUS(1)
PRODUCT
STATUS(2)(3)
LEVEL
DEFINITION
I
Objective data
Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
II
Preliminary data Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III
Product data
Production
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
DEFINITIONS
DISCLAIMERS
Short-form specification
The data in a short-form
Life support applications
These products are not
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes
Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
Application information
Applications that are
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2004 Nov 11
26
Philips Semiconductors – a worldwide company
Contact information
For additional information please visit http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
© Koninklijke Philips Electronics N.V. 2004
SCA76
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
R44/04/pp27
Date of release: 2004 Nov 11
Document order number: 9397 750 14189
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明