C1973P [PERKINELMER]
Channel Photomultipliers; 通道光电倍增管型号: | C1973P |
厂家: | PERKINELMER OPTOELECTRONICS |
描述: | Channel Photomultipliers |
文件: | 总11页 (文件大小:860K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Lighting
Imaging
Telecom
Sensors
Channel Photomultipliers
Channel Photomultipliers
Overview and Specifications
.
C H A N N E L P H O T O M U L T I P L I E R
When compared to conventional
PMTs, the CPM improves anode
sensitivity by one order of magni-
tude, while lowering dark current by
one to two orders of magnitude. The
noise level shows extreme stability
over time, with no ”bursts.” The
extremely low dark current results in
a higher dynamic range than con-
ventional PMTs and extends detec-
table limits for many applications.
Description
PerkinElmer Optoelectronics, for-
merly EG&G Optoelectronics, is
pleased to introduce the Channel
Photomultiplier (CPM), a new ultra
high sensitivity optical detector
which replaces conventional photo-
multipliers (PMTs) and avalanche
photo diodes (APDs). This device
uses a unique detector principle, re-
sulting in a compact design with ul-
tra high gain, high dynamic range,
extremely low dark current, and fast
response.
Features
• Ultra high anode sensitivity
up to 10 A/W
• Extremely low dark current,
typically 3pA @ 10 gain
• Very low equivalent
noise input (down to 10 W)
• Very high stability in dark current
(no ”bursts”)
• High gain exceeding 10
• Very high dynamic range
• Compact dimensions
• Wide spectral response through
multiple window materials
• High resolution
• Fast response time
• High immunity to magnetic fields
• Rugged design
7
The CPM can be used in analog-DC
mode, single photon counting mode,
and in nuclear spectroscopy (when
coupled to scintillation materials like
BGO, LSO, Nal, etc.). PerkinElmer
Optoelectronics offers a choice of
window materials and photocatho-
des to cover the spectrum from
115 nm (UV range) to 900 nm (NIR).
6
-17
This high-performance detector offers
fundamental advantages for analytical
instrumentation applications such as
emission spectroscopy, flourescence,
atomic absorption spectroscopy, and
bio and chemo luminescence. The
CPM also delivers important advan-
tages in life science products, indus-
trial and medical equipment, and high-
energy physics.
8
The new detector is a small, head-on
type with a total diameter of 10.5 mm
including encapsulation. PerkinElmer
Optoelectronics also offers custom
configurations for specific applica-
tions.
P R I N C I P L E O F O P E R A T I O N
Principle of Operation
Physical Specification
The CPM, like conventional photo-
multiplier tubes, converts a very low
light level into photoelectrons by a
semitransparent photocathode de-
posited on the inner surface of the
entrance window. On their way from
the cathode to the anode the photo-
electrons pass through a narrow, se-
miconductive channel. Each time the
electrons hit the inner wall of the
curved channel, multiple secondary
electrons are emitted. This effect oc-
curs multiple times along the path,
leading to an avalanche effect with a
Cathode Channel-Entrance
Channel-End Anode
-HV
red
-HV +50…+300 V
blue
Coax
-20…-50 V
black
100 V
-HV
1 Mohm
8
gain exceeding 10 . The curved sha-
pe of the glass tube improves the
multiplication effect.
Proposal for Power Supply
M A I N F E A T U R E S
Compact Size
The CPM is one of the smallest head-
on type detectors, with a 10.5 mm
diameter including encapsulation. The
photocathode has a useful diameter
of more than 5 mm. The tube is smal-
ler, easier to use, and more rugged
than discrete dynode types. Only a
single high voltage supply of up to
3000 volts is necessary; no external
voltage divider network is required.
A variety of different sizes will be avai-
1
3
Unpotted / inch Channel Photomultiplier
1
3
2
4
lable soon ( / ” and / ”).
Fig. 1: Typical current amplification
1 E+09
1 E+08
1 E+07
1 E+06
1 E+05
1 E+04
1 E+03
1 E+02
Ultra high anode sensitivity
At the maximum bias voltage of 3000 V,
8
gains can exceed 10 . At 2400 V, an-
6
ode sensitivity is typically 3 x 10 A/W
at a wavelength of 410 nm with a bi-
alkali photocathode. This performan-
ce surpasses conventional PMTs by
one to two orders of magnitude and
beats APDs by approximately five or-
ders of magnitude (Fig. 1).
1000
1500
2000
2500
3000
Bias Voltage (V)
Extremely low dark current
Fig. 2: Typical anode dark current
The electron multiplication in the
channel is virtually silent, so dark cur-
rent depends only on the photoca-
thode material, leakage currents are
negligible. Bialkali photocathodes ex-
hibit typical dark count rates of 10
1 E-05
1 E-06
1 E-07
1 E-08
1 E-09
1 E-10
1 E-11
1 E-12
8
cps at a gain of 3 x 10 , while UV ca-
thodes have dark count rates below 1
cps. In analog DC mode, the typical
dark noise for a bialkali photocathode
7
is 20 pA at a gain of 10 . In general,
C 942
C 972
C 962
C 952
the noise level of the PerkinElmer
Optoelectronics CPM is one to two
orders of magnitude lower than dyn-
ode PMTs, resulting in a significant-
ly higher dynamic range (Fig.2).
C 922
C 911
1000
1500
2000
Bias Voltage (V)
2500
3000
High stability in dark current level
As a result of the semiconductive inner surface of the CPM, no charge-up effects occur at the glass surface. This
results in a very high stability of the dark current level over time, with no sudden changes (bursts). The semiconductive
surface also causes high-light recovery times to be extremely small.
Fig. 3: Typical photo electron spectrum
Excellent photon counting resolution
2000
7
At gains exceeding 10 the single photo electron pulse is
PMT
perfectly separated from the electrical noise, due to a sa-
CPM
turation effect of the channel. The CPM exhibits single
1500
photon resolution with excellent peak to valley ratios.
Fig. 3 shows the single photo electron spectrum taken
from a multi-channel analyzer compared to a conventional
1000
photomultiplier (Fig. 3).
500
Choice of entrance window
0
0
50
100
150
200
250
300
The CPM is available with different window materials,
which are:
Channel
MgF2, Quartz, UV-glass, and Borosilicate glass. The com-
bination of different photocathodes and entrance windows
results in a spectral range from 115 nm to 900 nm. Other
window materials and photocathode combinations are
available on a custom basis (Fig. 4.1 and 4.2).
Fig. 4.1: Typical spectral response
100
10
1
C 952
C 973
Available related products
C 922
C 911
200
C 972
0.1
100
300
400
500
600
700
800
900
• High Voltage supply
Wavelength (nm)
CHV 30N (supplies 1 CPM, negative output voltage),
CHV 30P (supplies 1 CPM, positive output voltage),
J4-3N (supplies 10 to 15 CPMs)
Fig. 4.2: Typical spectral response
100
10
1
• CPM Modules
MP900-series: Photoncounting module with
TTL output, including CPM,
electronic and high voltage
MD900-series: DC module including high
voltage supply, amplifier,
C 943
C 944
C 962
C 942
I/U converter, output 0 to 10 V,
bandwidth 1kHz
MH900-series: High voltage module,
including CPM and
0.1
high voltage power supply
100
200
300
400
500
600
700
800
900
Wavelength (nm)
• CPM Formats
1
3
/ “ C900-series
EU
USA
1
2
/ “ C1300-series
PerkinElmer Optoelectronics GmbH
Heimann Opto
65020 Wiesbaden, Germany
PerkinElmer Optoelectronics
2175 Mission College Blvd.
Santa Clara, CA 95054
3
4
/ “ C1900-series
PO-Box 3007
http://www.perkinelmer.com/opto
Tel. ++1 (408) 565 - 0830
Fax ++1 (408) 565 - 0703
Datasheets on request
http://www.perkinelmer.com/opto
CPM C900 Series
1/3” CPM Channel Photomultipliers
· High Sensitivity Optical Detector
· Extremely High Gain
· Ultra Low Noise
· 1/3 Inch, Head-On Type
Technical Specifications
Dimensions (mm)
CPM C900 Series
1/3” CPM Channel Photomultipliers
CPM C900 Performance Specifications
Spectral response
100
C
943C 944
10
C
983
C
973
C
972
962
952
1
C
C
922
C
921
C
C
982
C
911
C
942
0.1
100
200
300
400
500
600
700
800
900
Wavelength (nm)
Dark Current
Current Amplification
1,E-05
1,E-06
1,E-07
1,E-08
1,E-09
1,E-10
1,E-11
1,E-12
1,E+09
1,E+08
1,E+07
1,E+06
1,E+05
1,E+04
1,E+03
1,E+02
C 962
C 972
C 942
C 952
C 982
C 922
C 911
1000
1500
2000
2500
3000
1000
1500
2000
2500
3000
Bias voltage (V)
Bias Voltage (V)
Magnetic Field Effects
Equivalent Noise Input
120
100
80
60
40
20
0
1E-14
1E-15
1E-16
1E-17
1E-18
CPM -axial magn field
CPM -transverse magn field
C 972
C 962
C 952
C 942
C 982
C 911 C 922
-400 -300 -200 -100
0
100
200
300
400
100
200
300
400
500
600
700
800
900
Magnetic field (Gauss)
Wavelength (nm)
CAUTION: High Voltage Warning!
This product is operated at high voltage. Extreme care must be taken to ensure operator safety and to avoid
damage to other instruments. Avoid direct contact with the photomultiplier when high voltage is applied. Avoid
placing conductive material close to the cathode.
All given values are nominal/typical @ 20 °C ambient temperature; specifications subject to change without
notice.
CPM C1300 Series
1/2” CPM Channel Photomultipliers
· High Sensitivity Optical Detector
· Extremely High Gain
· Ultra Low Noise
· 1/2 Inch, Head-On Type
Technical Specifications
Dimensions (mm)
CPM C1300 Series
1/2” CPM Channel Photomultipliers
CPM C1300 Performance Specifications
Spectral response
100
C
1343C 1344
10
C
1383
C
1373
C
1372
1
C
1362
C
1322
1321
C
C
1352
800
C
1382
C
1311
C
1342
0.1
100
200
300
400
500
600
700
900
Wavelength (nm)
Dark Current
Current Amplification
1,E-05
1,E-06
1,E-07
1,E-08
1,E-09
1,E-10
1,E-11
1,E+09
1,E+08
1,E+07
1,E+06
1,E+05
1,E+04
1,E+03
1,E+02
C 1362
C 1352
C 1372
C 1342
C 1382
C 1322
C 1311
1,E-12
3000
1000
1500
2000
2500
1000
1500
2000
2500
3000
Bias Voltage (V)
Bias voltage (V)
Typical Photo Electron Spectrum
Equivalent Noise Input
1E-14
1E-15
1E-16
1E-17
1E-18
2000
1500
1000
500
0
CPM
C
1372
C
1362
C
1352
C
1342
C
1382
C
1322
C
1311
0
50
100
150
200
250
300
100
300
500
W avelength (nm )
700
900
Channel
CAUTION: High Voltage Warning!
This product is operated at high voltage. Extreme care must be taken to ensure operator safety and to avoid
damage to other instruments. Avoid direct contact with the photomultiplier when high voltage is applied. Avoid
placing conductive material close to the cathode.
All given values are nominal/typical @ 20 °C ambient temperature; specifications subject to change without
notice.
CPM C1900 Series
3/4” CPM Channel Photomultipliers
· High Sensitivity Optical Detector
· Extremely High Gain
· Ultra Low Noise
· 3/4 Inch, Head-On Type
Technical Specifications
Dimensions (mm)
CPM C1900 Series
3/4” CPM Channel Photomultipliers
CPM C1900 Performance Specifications
Spectral response
100
C
1943C 1944
10
C
1983
C
1973
C
1972
1
C
1962
C
1322
1921
C
C
1952
800
C
1982
C
1911
C
1942
0.1
100
200
300
400
500
600
700
900
Wavelength (nm)
Current Amplification
Dark Current
1,E-05
1,E-06
1,E-07
1,E-08
1,E-09
1,E-10
1,E-11
1,E+09
1,E+08
1,E+07
1,E+06
1,E+05
1,E+04
1,E+03
1,E+02
C 1962
C 1942
C 1952
C 1972
C 1982
C 1922
C 1911
1,E-12
1000
1500
2000
2500
3000
1000
1500
2000
2500
3000
Bias voltage (V)
Bias Voltage (V)
Typical Photo Electron Spectrum
Equivalent Noise Input
2000
1500
1000
500
0
1E-14
1E-15
1E-16
1E-17
1E-18
CPM
C 1972
C 1962
C 1952
C 1942
C 1982
C 1911
C 1922
0
50
100
150
200
250
300
100
300
500
700
900
Channel
W avelength (nm )
CAUTION: High Voltage Warning!
This product is operated at high voltage. Extreme care must be taken to ensure operator safety and to avoid
damage to other instruments. Avoid direct contact with the photomultiplier when high voltage is applied. Avoid
placing conductive material close to the cathode.
All given values are nominal/typical @ 20 °C ambient temperature; specifications subject to change without
notice.
USA:
EUROPE:
ASIA:
PerkinElmer Optoelectronics
2175 Mission College Blvd.
Santa Clara, CA 95054
Phone: (408) 565-0850
Fax: (408) 565-0793
PerkinElmer Optoelectronics GmbH
Wenzel-Jaksch-Str. 31
65199 Wiesbaden
Germany
Phone: +49 611 492 534
Fax: +49 611 492 578
PerkinElmer Optoelectronics
47 Ayer Rajah Crescent #06-12
Singapore 139947
Phone: +65 775 2022
Fax: +65 775 1008
.
© 2001 PerkinElmer, Inc. All rights reserved.
DS-291 Rev A 1101
www. per k inelm er. c om / opt o
相关型号:
©2020 ICPDF网 联系我们和版权申明