PI49FCT807ATSE [PERICOM]

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.300 INCH, GREEN, SOIC-20;
PI49FCT807ATSE
型号: PI49FCT807ATSE
厂家: PERICOM SEMICONDUCTOR CORPORATION    PERICOM SEMICONDUCTOR CORPORATION
描述:

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.300 INCH, GREEN, SOIC-20

驱动 光电二极管 逻辑集成电路
文件: 总6页 (文件大小:335K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PI49FCT807T  
Fast CMOS Clock Driver  
Features  
Description  
Guaranteed low skew: 0.25ns  
Low input capacitance  
Minimum duty cycle distortion  
1:10 fanout  
Pericom Semiconductor’s PI49FCT807T clock driver feature one  
inputandtenoutputs.Thelargefanoutfromasingleinputlinereduces  
loadingoninputclock.TTLleveloutputsreducenoiselevelsonthe  
part. Typical applications are clock and signal distribution.  
High speed: 3.5ns propagation delay  
TTL input and CMOS output compatible  
– V = 3.3V (typ.)  
OH  
– V = 0.3V (typ.)  
OL  
Industrial Operation at -40ºC to +85ºC  
Packaging (Pb-free & Green available):  
– 20-pin 150-mil wide QSOP (Q)  
– 20-pin 300-mil SOIC (S)  
Pin Conguration  
Block Diagram  
B
B
B
B
B
B
B
B
B
B
0
1
2
3
4
5
6
7
8
9
A
1
2
3
4
5
6
7
8
9
10  
20  
19  
18  
17  
16  
15  
14  
13  
12  
11  
V
B
B
CC  
9
GND  
B
0
8
V
GND  
CC  
B
1
B
V
B
7
GND  
CC  
6
B
2
V
GND  
CC  
A
B
3
B
B
5
4
GND  
Pin Description  
Pin Name  
A
Description  
Input  
B0 - B9  
GND  
Outputs  
Ground  
Power  
V
CC  
1
PS7008G  
11/25/09  
09-0006  
PI49FCT807T  
Fast CMOS Clock Driver  
Maximum Ratings  
(Above which the useful life may be impaired. For user guidelines, not tested.)  
Storage Temperature .......................................................... –65°C to +150°C  
Ambient Temperature with Power Applied ..........................-40°C to +85°C  
Note:  
Stresses greater than those listed under MAXIMUM RAT-  
INGS may cause permanent damage to the device. This is  
a stress rating only and functional operation of the device  
at these or any other conditions above those indicated in the  
operational sections of this specication is not implied. Ex-  
posure to absolute maximum rating conditions for extended  
periods may affect reliability.  
Supply Voltage to Ground Potential (Inputs & V Only)... –0.5V to +7.0V  
CC  
Supply Voltage to Ground Potential (Outputs & D/O Only) –0.5V to +7.0V  
DC Input Voltage .................................................................. –0.5V to +7.0V  
DC Output Current............................................................................. 120mA  
Power Dissipation................................................................................. 0.5W  
DC Electrical Characteristics (Over the Operating Range, T = 40°C to +85°C, V = 5.0V ±5%)  
A
CC  
Parameters Description  
Test Conditions(1)  
Min  
Typ(2)  
Max Units  
V
Output HIGH Voltage  
Output LOW Current  
V
=Min., V = V or V  
I
I
I
= –15.0mA  
2.4  
3.3  
V
OH  
OL  
CC  
CC  
IN  
IH  
IL  
OH  
V
V
=Min., V = V or V  
= 48.0mA  
= 12mA  
0.2  
0.5  
0.2  
V
V
IN  
IH  
IL  
OL  
OL  
V
V
Input HIGH Voltage  
Input LOW Voltage  
Input HIGH Current  
Input LOW Current  
Input HIGH Current  
Clamp Diode Voltage  
Short Circuit Current  
Power Down Disable  
Input Hysteresis  
Guaranteed Logic HIGH Level  
Guaranteed Logic LOW Level  
2.0  
-60  
V
V
IH  
0.8  
1
IL  
I
I
I
V
CC  
V
CC  
V
CC  
V
CC  
V
CC  
V
CC  
= Max.  
= Max.  
V
V
= 2.7V  
= 0.5V  
μA  
μA  
μA  
V
IH  
IN  
IN  
-1  
IL  
I
= Max., V =V (Max.)  
20  
-1.2  
IN  
CC  
V
I
= Min., I = –18mA  
= Max.(3), V  
-0.7  
IK  
IN  
= GND  
OUT  
-120  
mA  
μA  
mV  
OS  
I
= GND, V  
= 4.5V  
OUT  
100  
OFF  
V
150  
H
Capacitance (TA = 25°C, f = 1 MHz)  
Parameters(4)  
Description  
Test Conditions  
VIN = 0V  
Typ  
6.0  
8
Max  
Units  
pF  
CIN  
Input Capacitance  
Output Capacitance  
10  
12  
COUT  
VOUT = 0V  
pF  
Notes:  
1. For Max. or Min. conditions, use appropriate value specied under Electrical Characteristics for the applicable device type.  
2. Typical values are at Vcc = 5.0V, +25°C ambient and maximum loading.  
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.  
4. This parameter is determined by device characterization but is not production tested.  
2
PS7008G  
11/25/09  
09-0006  
PI49FCT807T  
Fast CMOS Clock Driver  
Power Supply Characteristics  
Parameters Description  
Test Conditions(1)  
Min.  
Typ  
Max.  
Units  
ICC  
Quiescent Power  
Supply Current  
VCC = Max  
VCC = Max  
V
or V  
VIN = 3.4V(3)  
= GND  
3
30  
μA  
IN  
CC  
ΔICC  
Supply Current per  
Input @ TTL HIGH  
0.5  
0.4  
1.5  
0.6  
mA  
ICCD  
Supply Current per  
Input per MHz(4)  
VCC = Max., Outputs Open  
50% Duty Cycle,  
V
V
= VCC  
= GND  
mA/  
MHz  
IN  
IN  
Per Output Toggling  
(5)  
IC  
Total Power Supply  
Current(6)  
VCC = Max., Outputs Open  
fCP = 50 MHZ, 50% Duty Cycle  
V
V
= VCC  
= GND  
20  
30  
mA  
IN  
IN  
(5)  
V
IN  
V
IN  
= 3.4V  
= GND  
20.7  
33  
Notes:  
1. For Max. or Min. conditions, use appropriate value specied under Electrical Characteristics for the applicable device.  
2. Typical values are at Vcc = 5.0V, +25°C ambient.  
3. Per TTL driven input (VIN = 3.4V); all other inputs at Vcc or GND.  
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.  
5. Values for these conditions are examples of the Icc formula. These limits are guaranteed but not tested.  
6. IC =IQUIESCENT + IINPUTS + IDYNAMIC  
IC = ICC + ICC DHNT + ICCD (fCP/2 + fINI)  
ICC = Quiescent Current  
ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)  
DH = Duty Cycle for TTL Inputs High  
NT = Number of TTL Inputs at DH  
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)  
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)  
fI = Input Frequency  
NI = Number of Inputs at fI  
All currents are in milliamps and all frequencies are in megahertz.  
Switching Characteristics over Operating Range  
Parameters Description  
Conditions(1)  
807/2807T  
Com.  
807AT  
Com.  
807BT  
Com.  
807CT  
Com.  
Units  
Min. Max. Min. Max. Min. Max. Min. Max.  
tPLH  
Propagation Delay  
C
R
L
L
= 50pF  
= 500Ω  
1.5  
4.5  
1.5  
4.0  
1.5  
3.8  
1.5  
3.5  
ns  
A
TO  
B
N
tPHL  
tSK(o)  
Skew between two outputs  
of same package(3)  
0.5  
0.5  
0.5  
0.5  
0.35  
0.35  
0.25  
0.35  
ns  
ns  
tSK(p)  
Skew between opposite tran-  
sitions of same output (|tPHL  
— tPLH|)(3)  
tSK(t)  
Skew between outputs of  
different package at same  
power supply, temperature  
and speed grade(3)  
1.0  
1.0  
0.75  
0.75  
ns  
Notes:  
1. See test circuit and wave forms.  
2. Minimum limits are guaranteed but not tested on Propagation Delays.  
3. This parameter is guaranteed but not tested.  
3
PS7008G  
11/25/09  
09-0006  
PI49FCT807T  
Fast CMOS Clock Driver  
Tests Circuits For All Outputs(1)  
Switch Position  
V
CC  
7.0V  
500Ω  
500Ω  
V
IN  
VOUT  
Pulse  
Generator  
Denitions:  
D.U.T.  
CL = Load capacitance: includes jig and probe capacitance.  
RT =Termination resistance: should be equal to ZOUT of the Pulse  
Generator.  
50pF  
R
T
C
L
Switching Waveforms  
Pulse Skew – tSK(p)  
Propagation Delay  
3V  
3V  
Input  
1.5V  
0V  
Input  
1.5V  
0V  
t
PLH  
t
PHL  
t
PLH  
tPHL  
V
OH  
V
OH  
2.0V  
Output  
1.5V  
Output  
1.5V  
0.5V  
VOL  
V
OL  
tR  
tF  
t
SK(p) = tPHL • tPLH ⎥  
Output Skew – tSK(o)  
Package Skew – tSK(t)  
3V  
Input  
1.5V  
0V  
3V  
Input  
1.5V  
0V  
t
PLHx  
tPHLx  
V
OH  
t
PLH1  
tPHL1  
Ox  
Oy  
1.5V  
V
OH  
Package 1  
Output  
1.5V  
V
OL  
t
SK(o)  
t
t
SK(o)  
PHLy  
V
OL  
V
OH  
t
SK(t)  
t
SK(t)  
PHL2  
V
OH  
1.5V  
Package 2  
Output  
1.5V  
V
OL  
V
OL  
t
PLHy  
t
PLH2  
t
t
SK(o) = tPLHy • tPLHx or tPHLy • tPHLx ⎥  
t
SK(t) = tPLH2 • tPLH1 or tPHL2 • tPHL1 ⎥  
4
PS7008G  
11/25/09  
09-0006  
PI49FCT807T  
Fast CMOS Clock Driver  
DOCUMENT CONTROL NO.  
PD - 1202  
20  
REVISION: H  
.008  
0.20  
MIN.  
DATE: 10/22/07  
.008  
.013  
0.20  
0.33  
.150  
.157  
3.81  
3.99  
Guage Plane  
0˚-6˚  
.010  
.016  
.035  
0.41  
0.89  
0.254  
1
Detail A  
.337 8.56  
.344 8.74  
.041  
1.04  
REF  
.015 x 45˚  
.058  
1.47  
REF  
0.38  
.053  
.069  
1.35  
1.75  
Detail A  
0.178  
0.254  
.007  
.010  
SEATING  
PLANE  
.004 0.101  
.010 0.254  
.025  
BSC  
0.635  
.228  
.244  
.008  
.012  
0.203  
0.305  
5.79  
6.19  
X.XX  
X.XX  
DENOTES DIMENSIONS  
IN MILLIMETERS  
Pericom Semiconductor Corporation  
3545 N. 1st Street, San Jose, CA 95134  
1-800-435-2335 • www.pericom.com  
Note:  
1) Controlling dimensions in inches.  
2) Ref: JEDEC MO-137B/AD  
3) Dimensions do not include mold flash, protrusions or gate burrs  
DESCRIPTION: 20-Pin, 150-Mil Wide, QSOP  
PACKAGE CODE: Q  
5
PS7008G  
11/25/09  
09-0006  
PI49FCT807T  
Fast CMOS Clock Driver  
$/#5-%.4 #/.42/, ./ꢆ  
0$ ꢃ ꢇꢂꢂꢈ  
ꢄꢁ  
2%6)3)/.ꢀ $  
$!4%ꢀ ꢂꢅꢉꢂꢊꢉꢂꢋ  
ꢉꢀꢈꢁ  
ꢉꢀꢊꢁ  
ꢀꢄꢇꢃꢈ  
ꢀꢄꢇꢇꢄ  
ꢁꢀꢄꢂꢈ  
ꢁꢀꢉꢋꢉ  
ꢀꢁꢃꢁ  
ꢀꢁꢄꢇ  
X ꢈꢂƒ  
ꢀꢈꢇꢊ  
ꢀꢂꢃꢃ  
ꢃꢄꢀꢊꢁ  
ꢃꢄꢀꢇꢇ  
ꢀꢁꢁꢇꢃ  
ꢀꢁꢃꢄꢂ  
ꢁꢀꢄꢋ  
ꢁꢀꢋꢄ  
ꢁꢅꢆƒ  
ꢁꢀꢈꢃ  
ꢃꢀꢄꢉ  
ꢀꢁꢃꢊ  
ꢀꢁꢂꢁ  
ꢀꢁꢄꢁ ꢁꢀꢂꢁꢆ  
ꢀꢁꢋꢁ ꢁꢀꢉꢊꢄ  
2%&  
ꢄꢀꢋꢂ  
ꢄꢀꢊꢂ  
ꢀꢁꢇꢄꢊ  
ꢀꢃꢁꢈꢋ  
ꢀꢋꢇꢈ  
ꢀꢈꢃꢇ  
ꢃꢁꢀꢁꢁ  
ꢃꢁꢀꢊꢂ  
3%!4).'  
0,!.%  
ꢁꢀꢃꢁ  
ꢁꢀꢋꢁ  
ꢀꢁꢁꢈꢁ  
ꢀꢁꢃꢃꢆ  
ꢀꢁꢂꢁ  
"3#  
ꢃꢀꢄꢉ  
ꢀꢁꢃꢋ  
ꢀꢁꢄꢁ  
ꢁꢀꢋꢋ  
ꢁꢀꢂꢃ  
8ꢀ88  
8ꢀ88  
$%./4%3 #/.42/,,).'  
$)-%.3)/.3 ). -),,)-%4%23  
Pericom Semiconductor Corporation  
3545 N. 1st Street, San Jose, CA 95134  
1-800-435-2335 • www.pericom.com  
.OTESꢀ  
$%3#2)04)/.ꢀ ꢁꢂꢃ0INꢄ ꢅꢂꢂꢃ-IL 7IDEꢄ 3/)#  
0!#+!'% #/$%ꢀ 3  
ꢃꢌ #ONTROLLING DIMENSIONS IN MILLIMETERSꢀ  
ꢄꢌ 2EFꢍ *%$%# -3ꢅꢁꢃꢋ$ꢎ!#  
Note:  
For latest package info, please check: http://www.pericom.com/products/packaging/mechanicals.php  
(1,2,3)  
Ordering Information  
Ordering Code  
PI49FCT807CTQEX  
PI49FCT807CTSEX  
PI49FCT807TQEX  
PI49FCT807TSEX  
Package Code  
Speed Grade  
Package Type  
Pb-free & Green, 20-pin 150-mil QSOP  
Pb-free & Green, 20-pin 300-mil SOIC  
Pb-free & Green, 20-pin 150-mil QSOP  
Pb-free & Green, 20-pin 300-mil SOIC  
Q
S
C
C
Q
S
Blank  
Blank  
Notes:  
1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/  
E = Pb-free and Green  
2
3. X Sufx = Tape/Reel  
Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com  
6
PS7008G  
11/25/09  
09-0006  

相关型号:

PI49FCT807ATSEX

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.300 INCH, SOIC-20
PERICOM

PI49FCT807ATSX

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.300 INCH, SOIC-20
PERICOM

PI49FCT807BTH

Fast CMOS Clock Driver
PERICOM

PI49FCT807BTHE

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.209 INCH, SSOP-20
PERICOM

PI49FCT807BTHEX

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.209 INCH, SSOP-20
PERICOM

PI49FCT807BTHX

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.209 INCH, SSOP-20
PERICOM

PI49FCT807BTP

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDIP20, 0.300 INCH, PLASTIC, DIP-20
PERICOM

PI49FCT807BTPE

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDIP20, 0.300 INCH, PLASTIC, DIP-20
PERICOM

PI49FCT807BTQ

Fast CMOS Clock Driver
PERICOM

PI49FCT807BTQE

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.150 INCH, GREEN, QSOP-20
PERICOM

PI49FCT807BTQX

Low Skew Clock Driver, FCT Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.150 INCH, QSOP-20
PERICOM

PI49FCT807BTS

Fast CMOS Clock Driver
PERICOM