PI3A268CZME [PERICOM]

SPDT, 2 Func, 1 Channel, CMOS, PQCC10, 1.80 X 1.40 MM, GREEN, PLASTIC, MO-236, UQFN-10;
PI3A268CZME
型号: PI3A268CZME
厂家: PERICOM SEMICONDUCTOR CORPORATION    PERICOM SEMICONDUCTOR CORPORATION
描述:

SPDT, 2 Func, 1 Channel, CMOS, PQCC10, 1.80 X 1.40 MM, GREEN, PLASTIC, MO-236, UQFN-10

光电二极管
文件: 总9页 (文件大小:458K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PI3A268C  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
Features  
Description  
Negative Signal Handling Capability at all Ports  
PI3A268C is a dual, fast single-pole double throw  
(SPDT) CMOS switch with negative signal handling  
capability at all ports. It can be used as an analog switch  
or as a low-delay bus switch. Operating over a wide  
power supply voltage ranges from 1.65V to 4.3V,  
PI3A268C processes a low on-resistance and distortion.  
Break-before-make switching prevents both switches  
being enabled simultaneously. This eliminates signal  
disruption during switching.  
Low On-Resistance: 0.5at 3.0V Supply  
0.25Maximum RON Flatness for 3.0V Supply  
-3dB Bandwidth: 85MHz  
Low-ICCT Current Over an Expanded Control Input  
Range  
Wide VDD Range: 1.65V to 4.3V  
Power-off Protection on Common Ports  
Rail-to-Rail Signal Range  
High Off Isolation: -80dB @ 100kHz  
Crosstalk Rejection Reduces Signal Distortion:  
-80dB @ 100kHz  
PI3A268C dissipates a very low supply current even  
when the control voltage is lower than supply. This  
feature suits mobile handset applications by allowing  
direct interface with the general-purpose I/Os of  
baseband processors with minimal battery consumption.  
Extended Industrial Temperature Range: –40°C to  
85°C  
Packaging (Pb-free & Green):  
–10-contact UQFN (ZM10)  
Application  
Cell Phones, PDAs, MP3 Players  
Portable Instrumentation  
Computer Peripherals  
Speaker Headset Switching  
Power Routing  
Relay Replacement  
Audio and Video Signal Routing  
PCMCIA Cards  
Modems  
Pin Assignment  
Functional Block Diagram  
NC1  
COM1  
8
VDD  
10  
9
NC1  
COM1  
IN1  
NO1  
NO1  
NC2  
7
6
IN1  
IN2  
1
2
NC2  
NO2  
COM2  
IN2  
3
4
5
NO2 GND COM2  
UQFN-10 TOP VIEW)  
10-0021  
PT0375-1  
11/11/10  
1
PI3A268C  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
Maximum Ratings  
Note:  
Storage Temperature………………………………….. -65to +150℃  
Stresses greater than those listed under MAXIMUM  
Ambient Temperature with Power Applied......................-40to +85℃  
RATINGS may cause permanent damage to the  
Supply Voltage VDD………………………………………-0.5Vto +4.6V  
Control Input Voltage VINx………………………………..-0.5Vto +4.6V  
DC Input Voltage VINPUT………………………VDD -4.6V to VDD +0.3V  
Continuous Current NO_NC_COM_………………..…………±350mA  
Peak Current NO_NC_COM_  
device. This is a stress rating only and functional  
operation of the device at these or any other  
conditions above those indicated in the operational  
sections of this specification is not implied.  
Exposure to absolute maximum rating conditions  
for extended periods may affect reliability.  
Control input must be held HIGH or LOW; it must  
not float.  
(pulsed at 1ms 50% duty cycle) ……………………….….. ±400mA  
Peak Current NO_NC_COM_  
(pulsed at 1ms 10% duty cycle) ………………….……….. ±500mA  
Pin Description  
Logic Function Table  
Pin  
1, 3  
4
2, 10  
5, 8  
9
Name  
NOX  
GND  
NCX  
COMX  
VDD  
Description  
Data Ports (Normally open)  
Ground  
Data Ports (Normally closed)  
Common Output / Data Ports  
Positive Power Supply  
Logic Control Pins  
Logic Input (INX) Function  
0
1
NCX Connected to COMX  
NOX Connected to COMX  
Note: x = 1 or 2  
6, 7  
INX  
Recommended Operating Conditions  
Symbol  
Parameter  
Conditions  
Min.  
1.65  
0
VDD-4.6V  
-40  
Typ.  
-
-
-
25  
-
Max.  
4.3  
4.3  
VDD  
85  
10  
Unit  
V
V
V
°C  
ns/V  
VDD  
Operating Voltage  
-
-
-
-
-
VIN  
VINPUT  
TA  
Control Input Voltage  
Switch Input Voltage  
Operating Temperature  
Input Rise and Fall Time  
tr, tf  
0
PT0375-1  
11/11/10  
10-0021  
2
PI3A268C  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
Electrical Characteristics  
(TA = –40°C to 85°C, unless otherwise noted. Typical values are at VDD=3.0V and +25°C.)  
Parameter  
Symbol  
Test Conditions  
Min. Typ. Max. Units  
ANALOG SWITCH  
V
NO, VNC  
VCOM  
,
Analog Signal Range  
0
-
-
VDD  
-
V
VDD = 4.3V, ICOM = 100mA, VNO or VNC  
-0.3V/0V/0.7V/3.6V/4.3V  
Test Circuit Figure 1  
VDD = 3.0V, ICOM = 100mA, VNO or VNC  
-1.6V/0V/0.7V/2.3V/3.0V  
Test Circuit Figure 1  
VDD = 2.3V, ICOM = 100mA, VNO or VNC  
-2.3V/0V/0.7V/1.6V/2.3V  
Test Circuit Figure 1  
VDD = 1.65V, ICOM = 100mA, VNO or VNC  
-2.95V/0V/1.65V  
=
=
=
0.40  
-
-
-
0.50  
0.60  
1.00  
0.8  
On-Resistance  
RON  
-
-
=
Test Circuit Figure 1  
VDD = 4.3V, ICOM = 100mA, VNO or VNC =0.7V, Test  
Circuit Figure 1  
VDD = 3.0V, ICOM = 100mA, VNO or VNC =0.7V, Test  
Circuit Figure 1  
-
-
0.04 0.13  
0.06 0.13  
On-Resistance Match  
Between Channels  
RON  
VDD = 2.3V, ICOM = 100mA, VNO or VNC =0.7V, Test  
Circuit Figure 1  
-
-
-
0.12  
1.0  
0.25  
0.25  
-
V
DD = 1.65V, ICOM = 100mA, VNO or VNC =0.7V, Test  
-
Circuit Figure 1  
VDD = 4.3V, ICOM = 100mA, VNO or VNC = -0.3V, 0V,  
4.3V, Test Circuit Figure 1  
VDD = 3.0V, ICOM = 100mA, VNO or VNC = -1.6V, 0V,  
3.0V, Test Circuit Figure 1  
VDD = 2.3V, ICOM = 100mA, VNO or VNC = -2.3V, 0V,  
2.3V, Test Circuit Figure 1  
-
-
-
-
On-Resistance  
Flatness  
RONF  
-
0.5  
0.6  
-
V
DD = 1.65V, ICOM = 100mA, VNO or VNC =-2.95V,  
-
-
0V, 1.65V, Test Circuit Figure 1  
Common Port (COM1, COM2), VIN=0 to 4.3V,  
VDD=0V, NC, NO floating  
Power-Off Leakage  
Current (Common Port)  
IOFF  
IOFF (NO) or  
-1  
1
µA  
µA  
Source-Off  
Leakage Current  
V
V
DD=3.0V, VNO or VNC = -1.6V and 3.0V  
DD=3.0V, VNO or VNC = -1.6V and 3.0V  
-0.25  
-0.15  
-
-
0.25  
0.15  
IOFF (NC)  
INC(ON)  
INO(ON)  
ICOM (ON)  
ICC  
,
,
Channel On Leakage  
Current  
Supply Current  
VDD=4.3V, VIN=0 or VDD  
VDD=4.3V, Input at 2.6V  
VDD=4.3V, Input at 1.8V  
-0.5  
-
-
-
3
7
0.5  
10.0  
15.0  
µA  
Increase in ICC per Input  
DIGITAL INPUTS  
ICCT  
VDD=3.60V to 4.3V  
VDD=3.00V to 3.60V  
VDD=2.70V to 3.00V  
VDD=2.30V to 2.70V  
1.70  
1.50  
1.35  
1.30  
0.90  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.6  
0.5  
0.4  
0.4  
Input Logic High  
Input Logic Low  
VIH  
V
V
DD=1.65V to 2.30V  
VDD=3.60V to 4.30V  
VDD=2.70V to 3.60V  
VDD=2.30V to 2.70V  
VIL  
V
DD=1.65V to 2.30V  
IN Input Leakage  
Current  
IIN  
VIN=0 or VDD  
-0.5  
-
0.5  
µA  
To be continued.  
PT0375-1  
11/11/10  
10-0021  
3
PI3A268C  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
Continuously.  
Parameter  
Symbol  
Test Conditions  
Min. Typ. Max. Units  
DYNAMIC CHARACTERISTICS  
VDD=3.60V to 4.30V, VIH=1.5V, VIL=0V, RL=50,  
CL=35pF. See Test Circuit Figure 2.  
VDD=2.70V to 3.60V, VIH=1.5V, VIL=0V, RL=50,  
CL=35pF. See Test Circuit Figure 2.  
VDD=2.30V to 2.70V, VIH=1.5V, VIL=0V, RL=50,  
CL=35pF. See Test Circuit Figure 2.  
-
-
-
-
-
-
50  
50  
50  
Turn-On Time  
tON  
tOFF  
tBBM  
ns  
ns  
ns  
V
DD=1.65V to 2.30V, VIH=1.5V, VIL=0V, RL=50,  
-
40  
-
CL=35pF. See Test Circuit Figure 2.  
VDD=3.60V to 4.30V, VIH=1.5V, VIL=0V, RL=50,  
CL=35pF. See Test Circuit Figure 2.  
VDD=2.70V to 3.60V, VIH=1.5V, VIL=0V, RL=50,  
CL=35pF. See Test Circuit Figure 2.  
VDD=2.30V to 2.70V, VIH=1.5V, VIL=0V, RL=50,  
CL=35pF.See Test Circuit Figure 2.  
-
-
-
-
-
-
50  
55  
60  
Turn-Off Time  
V
DD=1.65V to 2.30V, VIH=1.5V, VIL=0V, RL=50,  
-
60  
-
CL=35pF. See Test Circuit Figure 2.  
VDD=3.60V to 4.30V, VIH=1.5V, RL=50, CL=35pF.  
See Test Circuit Figure 3.  
VDD=2.70V to 3.60V, VIH=1.5V, RL=50, CL=35pF.  
See Test Circuit Figure 3.  
VDD=2.30V to 2.70V, VIH=1.5V, RL=50, CL=35pF.  
See Test Circuit Figure 3.  
-
-
-
6
7
-
-
-
Break-Before-Make  
Delay  
10  
V
DD=1.65V to 2.30V, VIH=1.5V, RL=50, CL=35pF.  
-
-
21  
-
-
See Test Circuit Figure 3.  
V
DD=1.65V to 4.3V, VBIAS =1.5V,  
NC-NO and COM-NC/NO  
Off-Isolation  
OISO  
VIN=0dBm, VIH=1.5V, VIL=0V.  
See Test Circuit Figure 4 and Figure 5  
100kHz  
100kHz  
-80  
dB  
dB  
V
DD=1.65V to 4.3V, VBIAS=1.5V,  
Channel-to-Channel  
Crosstalk  
XTALKD  
VIN=0dBm,VIH=1.5V, VIL=0V  
-
-80  
-
See Test Circuit Figure 6  
V
DD=1.65V to 4.3V, VIN=0dBm, VIH=1.5V, VIL=0V.  
3dB Bandwidth  
f3dB  
Q
-
-
-
85  
52  
-
-
-
MHz  
pC  
See Test Circuit Figure 7.  
Charge Injection Select  
Input to Common I/O  
Total Harmonic  
VDD=1.65V to 4.30V, VIN = GND, RS = 0, CL = 1nF,  
VIH=1.5V, VIL=0V See Test Circuit Figure 8.  
VDD=1.65V to 4.30V, f=20Hz to 20kHz, RL=32,  
VIN=2VPP, VBIAS=0V  
THD  
0.06  
%
Distortion  
Capacitance  
Parameter  
Symbol  
Test Conditions  
Min. Typ. Max. Units  
Control Pin Input Capacitance  
NC Off Capacitance  
NO Off Capacitance  
NC On Capacitance  
CIN  
VDD=0V, f=1MHz,  
-
-
-
-
-
6
-
-
-
-
-
CNC (OFF) VDD=3.3V, f = 1MHz, See Test Circuit Figure 9.  
CNO (OFF) VDD=3.3V, f = 1MHz, See Test Circuit Figure 9.  
CNC (ON) VDD=3.3V, f = 1MHz, See Test Circuit Figure 10.  
CNO (ON) VDD=3.3V, f = 1MHz, See Test Circuit Figure 10.  
21  
21  
65  
65  
pF  
NO On Capacitance  
PT0375-1  
11/11/10  
10-0021  
4
PI3A268C  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
Test Circuits and Timing Diagrams  
Figure 1. On Resistance  
Notes:  
1. Unused input (NC or NO) must be grounded.  
VIN  
VNO or VNC  
NO  
NC  
Figure 2. Switching Times  
VDD  
Figure 3. Break Before Make Interval Timing  
PT0375-1  
11/11/10  
10-0021  
5
PI3A268C  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
VDD  
VDD  
Figure 4. COM-NC/NO Isolation  
Figure 5. NC-NO Isolation  
PT0375-1  
11/11/10  
10-0021  
6
PI3A268C  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
VDD  
10nF  
VDD  
Figure 6. Channel-to-Channel Crosstalk  
Figure 7. Bandwidth  
PT0375-1  
11/11/10  
10-0021  
7
PI3A268C  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
Figure 8. Charge Injection  
Figure 9. Channel Off Capacitance  
Figure 10. Channel On Capacitance  
PT0375-1  
11/11/10  
10-0021  
8
PI3A268C  
Low-Voltage Dual-SPDT (0.5) Analog Switch  
with Negative Swing Audio Capability  
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||  
Mechanical Information 10-pin UQFN (ZM10)  
PKG. DIMENSIONS(MM)  
SYMBOL  
MIN  
0.50  
0.00  
NOM  
0.55  
-
0.15REF  
1.40  
1.80  
0.20  
0.40  
0.50  
0.40 BSC  
MAX  
0.60  
0.05  
A
A1  
A3  
D
E
b
L
L1  
e
1.35  
1.75  
0.15  
0.30  
0.40  
1.45  
1.85  
0.25  
0.50  
0.60  
Note:  
1) Controlling dimensions in millimeters.  
2) Ref: JEDEC MO-248/236  
Marking Description  
PIN 1  
10  
9
8
Shortened Part No  
7
6
1
2
lM  
Shortened Date Code  
YW  
3
4
5
Ordering Information  
Part Number  
Package Code  
Package  
PI3A268CZME  
ZM  
Lead Free and Green UQFN-10 (ZM10)  
Notes:  
z
E = Pb-free and Green  
X Suffix= Tape and reel  
z
Pericom Semiconductor Corporation y 1-800-435-2336 y www.pericom.com  
PT0375-1  
11/11/10  
10-0021  
9

相关型号:

PI3A268CZMEX

SPDT, 2 Func, 1 Channel, CMOS, PQCC10, 1.80 X 1.40 MM, GREEN, PLASTIC, MO-236, UQFN-10
DIODES

PI3A268SCZME

SPDT, 2 Func, CMOS, 1.40 X 1.80 MM, GREEN, MO-236, UQFN-10
PERICOM

PI3A268SCZMEX

SPDT, 2 Func, CMOS, 1.40 X 1.80 MM, GREEN, MO-236, UQFN-10
PERICOM

PI3A288

Ultra-Low-THD Dual-SPDT Analog Switch with Negative Signal Handling Capability
PERICOM

PI3A288ZMEX

Ultra-Low-THD Dual-SPDT Analog Switch with Negative Signal Handling Capability
PERICOM

PI3A3159

3.0V, SOTiny 0.4з SPDT Analog Switch
PERICOM

PI3A3159CZCEX

SPDT, 1 Func, 1 Channel, CMOS, GREEN, TDFN-6
PERICOM

PI3A3159TEX

3.0V, SOTiny 0.4з SPDT Analog Switch
PERICOM

PI3A3159TX

3.0V, SOTiny 0.4з SPDT Analog Switch
PERICOM

PI3A3159ZCEX

3.0V, SOTiny 0.4з SPDT Analog Switch
PERICOM

PI3A3160

3.0V, SOTiny⑩ 0.4з Dual SPDT Analog Switch
PERICOM

PI3A3160C

3.0V, SOTiny™ 0.8Ω Dual SPDT Analog Switch with -1.0V to 4.2V Operating Range
PERICOM