LPFCM34-A-C14 [PANDUIT]
Adhesive Backed Mounts and Devices Features and Benefits;
| 型号： | LPFCM34-A-C14 |
| 厂家： | 
PANDUIT CORP. |
| 描述： | Adhesive Backed Mounts and Devices Features and Benefits 连接器 连接器支架 |
| 文件： | 总8页 (文件大小：488K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SELECTION AND USE OF ADHESIVE BACKED MOUNTS AND DEVICES
PANDUIT offers high performance adhesive backed mounts and devices for a quick, dependable method of
securing, routing and protecting wires or cables. The adhesive backing provides easy installation and is an alternative
to mechanical fasteners. When properly installed, PANDUIT ® Adhesive Backed Mounts and devices offer the advantage
of lower installed cost and high reliability.
PANDUIT ® Adhesive Backed Mounts and Devices
Features and Benefits
■
Superior adhesive for long term reliability
2-up mount configuration speeds liner removal and installation
4-way cable tie entry makes part orientation fast and easy
Adhesive backing allows routing of wires and cables where mounting holes cannot be drilled
■
■
■
■
Mount sizes range from .50" x .50" to 2.00" x 2.00" for space limited or heavy load applications
■
UL Recognized
Used with PANDUIT ® cable ties for a complete wire routing solution
■
■
One piece solutions lower inventory costs and speed installation
Cable tie entry ramps guide the cable tie into the mount
Bevel entry on wire clips speeds installation
Releasable latches allow addition or removal of cables
■
■
■
Selection of Adhesive
Choose from three types of adhesive systems designed for specific application environments and temperatures: Rubber-based Adhesive
Foam Tape, Acrylic-based Adhesive Foam Tape, or Two-part Epoxy Adhesive. Carefully choosing the correct adhesive and closely following
the recommended installation steps will provide a reliable, long-term bond.
Rubber-Based Adhesive Foam Tape
Rubber-based Adhesive Foam Tape is the best choice for the vast majority of adhesive mount applications, including applications where
powder coated surfaces are being used. This pressure sensitive tape develops its strength extremely fast and can be used in indoor
environments with temperatures ranging from -20°F to 120°F (-29°C to 49°C). Rubber-based Adhesive Foam Tape is the most widely used
and generally recommended foam tape for wire routing applications.
Acrylic-Based Adhesive Foam Tape
Acrylic-based Adhesive Foam Tape is a good choice in applications with prolonged exposure to UV rays or heavy moisture. It is designed
to be used in indoor or outdoor environments where temperatures can vary from -20°F to 180°F (-29°C to 82°C). The
acrylic-based adhesive develops its maximum strength over a longer period of time compared to the rubber-based adhesive. It is
recommended that the mounts dwell eight (8) hours after installation and prior to loading.
Two-Part Epoxy Adhesive
Two-part Epoxy Adhesive is for use in applications where excessive loading is required or where the mounting surface is porous rather
than smooth. This adhesive is formulated specifically for use on PANDUIT ® EMS and ASMS mounts in either indoor or outdoor
applications. It is packaged in convenient pre-measured cups to insure the proper ratio of resin and hardener, as well as eliminate waste.
2
Guideline for Adhesive
The following chart should be used as a guideline for choosing
the best adhesive for common surfaces and chemical resistance.
Since each application has specific requirements, PANDUIT
recommends that further testing be conducted to determine the
suitability of the adhesive in a specific environment or application.
Rubber Based Foam
Tape Mounts
Acrylic Based Foam
Tape Mounts
Epoxy Applied
Adhesive Mounts
Surfaces
Plastics
Wood
Good
Good
Good
Good
Good
Fair
Good
Good
Good
Good
Fair
Glass
Fair
Painted Surfaces
Powder Coating
Metal
Good
Good
Good
Good
Fair
Good1
Good1
Paper
Good
Good
Concrete, Stone, Masonry
Chemical Resistance
Water
Not Recommended
Not Recommended
Good
Good
Poor
Fair 3
Fair 3
Fair 3
Fair 3
Fair 3
Good2
Poor
Oil
Poor
Good
Gasoline
Poor
Fair
Dilute Acids
Poor
Fair
Dilute Alkalis
Organic Solvents
Outdoor Exposure
Good
Fair
Poor
Not Recommended
Good2
Not Recommended
1. Not recommended for use on copper or brass.
2. Mounts manufactured from outdoor material only. For specific applications, individual testing prior to extensive use is suggested.
3. Depends on concentration, exposure time and chemical composition.
3
Proper Installation Steps
Surface Preparation
For best results, mounts should be applied to a clean, dry, and grease-free surface. It is recommended that for each individual application,
a solvent or cleanser be used to thoroughly prepare the surface for mount installation. The following are recommended cleaning guidelines:
1. For Rubber and Acrylic-based Adhesive Foam Tape, a mixture of water and isopropyl alcohol may be used on
most surfaces.
Alcohol
For Two-part Epoxy Adhesive, especially on masonry surfaces, be sure to clean all loose particles away before
mount installation. Some surface abrasion is recommended on smooth surfaces to achieve maximum strength.
A light rubbing with medium grit emery cloth or sandpaper is best. Wash the surface after abrading.
2. Allow the surface to dry completely before applying the mount.
Installing the Mount
1. For proper installation of adhesive backed mounts with foam tape, remove the release liner from the foam
adhesive. Without touching the adhesive, place the mount in the desired location.
For Two-part Epoxy Adhesive Mounts, apply 1/3 of the mixed adhesive to the bottom of the PANDUIT ® EMS or
ASMS mount. Without touching the adhesive, place the mount in the desired location.
2. Apply firm pressure for five (5) seconds to the foam tape mounts to insure proper adhesion.
Two-part Epoxy Adhesive Mounts should be twisted in place to ensure the adhesive is forced into the
porous surface.
3. Allow the mount to remain in place for the recommended dwell time for the specific adhesive being used.
The dwell time for Rubber-based Adhesive Foam Tape is two (2) hours and for Acrylic-based Adhesive Foam
Tape it is eight (8) hours.
12
3
9
6
Two-part Epoxy Adhesive Mounts can support about 5 lbs. after first fifteen (15) minutes. The adhesive fully
cures after twenty-four (24) hours and bonding strength will exceed 50 lbs.
4. The mount is now ready to be used.
4
Mount Spacing
To determine the number of mounts to use in a given application, the following formula can be used as a guideline:
Cable bundle weight in lbs/foot
Minimum number of
=
mounts per foot
Maximum static load rating of the mount*
For example, to determine the mount spacing using part number ABM2S-A-C for an application with a bundle of wires that weigh one
pound per foot, the formula would be:
1 pound per foot
=
2 mounts per foot
0.5 lbs load rating
* See pages 6-7 for static load ratings.
Proper Storage Conditions
Mounts and adhesives should be kept in the original packaging until they are ready to be applied. Store at room temperature 70°F (21°C)
with 45% or less relative humidity. Avoid storing adhesive products near heating vents or other heating sources.
Using the guidelines above, the average shelf life of adhesive foam tape is three (3) years from the date of manufacture. The shelf life of
Two-part Epoxy Adhesive is one (1) year from the date of manufacture. Failing to follow the recommended storage conditions may reduce
the shelf life or adhesive strength of the foam tape and Two-part Epoxy Adhesive.
Adhesive Technical Information
Adhesive foam tape properties are developed with thorough laboratory research and testing. The double-coated adhesive foam tape used
on PANDUIT ® Adhesive Backed Mounts is manufactured under strict quality requirements, which provide consistent, high quality
performance for use on adhesive mounts. Each package of mounts has an expiration date and a Quality Control number printed on the
label, which permit traceability.
Double Coated Foam Tape Properties
Rubber Adhesive
Acrylic Adhesive
Backing Material
Polyethylene
Polyethylene
Nominal Backing Density (pcf)
Thickness (PSTC-33)
6
6
(In.) Total
.040
.035
.039
.034
Less Liner
72°F/17.6 psi
72°F/8.8 psi
158°F/2.s psi
500+
1000+
100+
N/A
N/A
200+
Static Shear MIL-T-60394A (Hours)
5
Adhesive Backed Mounts and Clips
Std.
Pkg.
Length
Width
Max. Static Load
Part Number
Material
In.
mm
In.
mm
Lbs.
g
Adhesive Type Qty.‡
ABM
ABMT
PLA
4-Way Adhesive Backed Mounts
ABM1M-A-C
ABMM-A-C
ABM2S-A-C
ABM100-A-C
ABM112-A-C
ABM3H-A-L
Nylon 6.6
ABS
.50
.75
12.7
19.1
25.4
25.4
28.6
38.1
50.8
.50
.75
12.7
19.1
25.4
25.4
28.6
38.1
50.8
.13
.30
59
Rubber
Rubber
Rubber
Rubber
Rubber
Rubber
Rubber
100
100
100
100
100
50
136
227
227
286
508
907
ABS
1.00
1.00
1.12
1.50
2.00
1.00
1.00
1.12
1.50
2.00
.50
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
.50
.63
1.12
2.00
ABM4H-A-L
50
®
TAK-TY Hook & Loop Cable Tie Mounts
ABMT-A-C
Nylon 6.6
Nylon 6.6
1.10
1.10
28.7
28.7
1.10
1.10
28.6
28.6
.38
.38
174
174
Rubber
Rubber
100
100
ABMT-A-C20
Combination Adhesive Mount/Cable Ties
PLA2S-A-Q
PRA2S-A-Q
Nylon 6.6
Nylon 6.6
1.00
1.00
25.4
25.4
.90
.90
22.9
22.9
.45
.45
204
204
Rubber
Rubber
25
25
Snap-In Cable Tie Mount
SMS
ARC
ACC
SMS-A-C
ABS
2.00
50.8
25.4
1.00
1.00
25.4
25.4
1.00
.50
454
227
Rubber
Rubber
100
25
™
CLINCHER
ARC.68-A-Q
Adjustable Releasable Clamp
Polypropylene
1.00
Adhesive Backed Cord Clips
ACC19-A-C
ACC38-A-C
ACC62-A-C
“J” Clips
Nylon 6.6
Nylon 6.6
Nylon 6.6
.63
16.0
25.4
31.7
.76
19.3
25.4
28.6
.20
.50
.70
91
Rubber
Rubber
Rubber
100
100
100
1.00
1.25
1.00
1.12
227
318
AJC12-A-C
PVC
PVC
PVC
PVC
1.00
1.25
1.75
2.00
25.4
31.8
44.5
50.8
.86
.89
21.8
22.6
31.2
32.5
.40
.50
182
227
408
454
Rubber
Rubber
Rubber
Rubber
100
100
100
100
AJC19-A-C
AJC31-A-C
1.23
1.28
.90
AJC38-A-C
1.00
A1C Type Clips
A1C12-A-C8
A1C25-A-C8
A1C38-A-C8
A1C50-A-C8
A2C Type Clips
A2C12-A-C8
A2C25-A-C8
A2C38-A-C8
A2C50-A-C8
PVC
PVC
PVC
PVC
.77
.91
19.6
23.1
26.4
29.7
.63
.63
.63
.63
16.0
16.0
16.0
16.0
.14
.14
.14
.14
64
64
64
64
Rubber
Rubber
Rubber
Rubber
100
100
100
100
1.04
1.17
AJC
A1C
PVC
PVC
PVC
PVC
1.30
1.43
1.56
1.68
33.0
36.3
39.6
42.7
.63
.63
.63
.63
16.0
16.0
16.0
16.0
.14
.14
.14
.14
64
64
64
64
Rubber
Rubber
Rubber
Rubber
100
100
100
100
Metal Adhesive Backed Cord Clips
MACC25-A-C
MACC62-A-C
Zinc Plated Steel
Zinc Plated Steel
.79
20.0
30.0
.53
.75
13.5
19.1
.21
.44
95
Rubber
Rubber
100
100
1.18
200
Latching Wire Clips
LWC19-A-C
A2C
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
.85
.88
21.6
22.2
25.4
32.0
37.6
56.1
.61
15.5
25.4
25.4
25.4
31.5
50.0
.25
.45
113
204
227
272
417
1020
Rubber
Rubber
Rubber
Rubber
Rubber
Rubber
100
100
100
50
LWC25-A-C
1.00
1.00
1.00
1.24
1.97
LWC38-A-C
1.00
1.26
1.48
2.21
.50
LWC50-A-L
.63
LWC75-A-L
.93
50
MACC
LWC
LWC100-A-L
2.25
50
Contact customer service (800-777-3300) for additional sizes, materials, and acrylic tape availability or visit www.panduit.com.
‡ Order the number of pieces required, in multiples of Standard Package Quantity.
6
Adhesive Backed Mounts and Clips (continued)
Std.
Pkg.
Length
Width
Max. Static Load
Part Number
Material
In.
mm
In.
mm
Lbs.
g
Adhesive Type Qty.‡
BEC
VCC
LC
Bevel Entry Clips
BEC38-A-L
Nylon 6.6
Nylon 6.6
Nylon 6.6
1.46
1.46
1.46
37.1
37.1
37.1
1.24
1.24
1.49
31.5
31.5
37.8
.91
.91
411
411
493
Rubber
Rubber
Rubber
50
50
50
BEC62-A-L
BEC75-A-L
1.09
Vertical Cord Clip
VCC25-A-C
Nylon 6.6
1.00
25.4
.50
12.7
.25
113
Rubber
100
Adhesive Backed Latching Clips
LC3-A-C8
LC5-A-C8
LC10-A-L8
PVC
PVC
PVC
.75
19.0
25.7
37.9
.75
19.0
25.4
25.4
.28
.50
.60
127
227
272
Rubber
Rubber
Rubber
100
100
50
1.01
1.51
1.00
1.00
Low Profile Flat Cable Mounts
LPFCM14-A-C14
LPFCM22-A-C14
LPFCM34-A-C14
Nylon 6.6
Nylon 6.6
Nylon 6.6
2.56
3.31
4.56
65.0
84.0
.50
.50
.50
12.7
12.7
12.7
.25
.25
.25
113
113
113
Rubber
Rubber
Rubber
100
100
100
LPFCM
FCM
115.8
Latching Flat Cable Mounts
FCM1-A-C14
FCM1.2-A-C14
FCM2-A-C14
FCM3.25-A-L14
Nylon 6.6
Nylon 6.6
Nylon 6.6
Nylon 6.6
1.21
1.37
2.22
3.38
30.7
34.8
56.3
85.9
1.00
1.00
1.00
1.00
25.4
25.4
25.4
25.4
.50
.62
227
281
454
681
Rubber
Rubber
Rubber
Rubber
100
100
100
50
1.00
1.50
Cable Holder – Adhesive Backed
CH105-A-C14
Nylon 6.6
2.50
2.50
63.0
63.5
2.06
1.03
52.0
26.2
1.28
1.00
581
454
Rubber
Rubber
100
100
Latching Flat Cable Holder
CH
FCH2-A-C14
Flat Cable Clips
FCC-A-C8
Nylon 6.6
PVC
PVC
1.00
1.00
25.4
25.4
1.09
.56
27.7
14.1
.50
.25
227
113
Rubber
Rubber
100
100
FCC5-A-C8
Contact customer service (800-777-3300) for additional sizes, materials, and acrylic tape availability or visit www.panduit.com.
‡ Order the number of pieces required, in multiples of Standard Package Quantity.
FCH2
FCC
Epoxy Applied Mounts
Std.
Pkg.
Qty.‡
Length
Width
Max. Static Load
Part Number
Material
In.
mm
In.
mm
Lbs.
g
Adhesive Type
ASMS
EMS
ASMS-A-X
EMS-A-C
Aluminum Base/Nylon Mount
Nylon 6.6
1.13
1.00
28.6
25.4
1.13
1.00
28.6
25.4
10.00
10.00
4540
4540
EMA Epoxy
EMA Epoxy
10
100
‡ Order the number of pieces required, in multiples of Standard Package Quantity.
Epoxy Applied Mount Kits
Std.
Used With
Cable Ties
Number of
Number of
Number of
Number of Pkg.
Part Number
Color
Environment
Cable Ties EMS Mounts Epoxy Cups Mixer Sticks Qty.‡
Epoxy Adhesive Only
EMA-X
Gray
Indoors/Outdoors
––
—
—
—
3
10
1
10
1
10
10
Epoxy Mounting Kit with EMS Mounts
EMSK3-1-X0
Black
Indoors/Outdoors
M, I, S
EMS KITS
Epoxy Mounting Kit with EMS Mounts and Cable Ties
EMSK3-1-3-0
Black
Black
Indoors/Outdoors
Indoors/Outdoors
M, I, S
M, I, S
3 PLT2S-0
3 PLT2S-0
3
1
4
1
4
1
EMSK12-4-12-X0
12
10
‡ Order the number of pieces required, in multiples of Standard Package Quantity.
7
PANDUIT ® Corp.
Tinley Park, Illinois 60477-3091
For more information or to request a catalog
800-777-3300
cs@panduit.com
www.panduit.com
PANDUIT ® Europe Ltd.
London, UK
PANDUIT ® Japan
Tokyo, Japan
PANDUIT ® Asia Pacific Pte. Ltd.
Republic of Singapore
Phone: 44.208.601.7200
Phone: 81.3.3767.7011
Phone: 65.6379.6700
PANDUIT ® Latin America
Jalisco, Mexico
PANDUIT ® Australia Pty. Ltd.
Victoria, Australia
PANDUIT ® Canada
Markham, Ontario
Phone: 52.333.666.2501
Phone: 61.3.9794.9020
Phone: 800.777.3300
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
© PANDUIT ® Corp.
ALL RIGHTS RESERVED
Printed in the U.S.A.
SA-WACB06
04/2004
For a copy of PANDUIT ® product warranties, log on to www.panduit.com/warranty.
相关型号：
©2020 ICPDF网 联系我们和版权申明