TXD2SS-1.5V-1-Z [PANASONIC]
Power/Signal Relay, DPDT, Momentary, 0.188A (Coil), 1.5VDC (Coil), 280mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT;
| 型号： | TXD2SS-1.5V-1-Z |
| 厂家： | 
PANASONIC |
| 描述： | Power/Signal Relay, DPDT, Momentary, 0.188A (Coil), 1.5VDC (Coil), 280mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT 光电二极管 |
| 文件： | 总9页 (文件大小：2574K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TESTING
High Breakdown
Voltage Relay
TX-D RELAYS
2. 3,000 V breakdown voltage between
contact and coil. (Surge breakdown
voltage 6,000 V type)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm .197 inch)
The body block construction of the coil
that is sealed formation offers a high
breakdown voltage of 3,000 V between
contact and coil.
7. Sealed construction allows
automatic washing.
TYPICAL APPLICATIONS
3. Nominal operating power:
High sensitivity of 200 mW
By using the highly efficient polar
magnetic circuit “seesaw balance
mechanism”, a nominal operating
power of 200 mW has been achieved.
4. High contact capacity: 2 A 30 V DC
5. High contact reliability achieved
with gold-clad crossbar twin
contacts and the use of gas
expelling materials during
formation.
1. Facsimile
2. Modem
3. Communications (xDSL)
4. Medical equipment
5. Security
FEATURES
1. Approved to the supplementary
insulation class in the EN standards
(EN60950).
The insulation distance between the
contact and coil meet the
supplementary insulation class of the
EN60950 standards as required for
equipment connected to the telephone
lines in Europe.
Satisfies the following conditions:
• Clearances: 2.0 mm .079 inch or
more
*We also offer TX-series relays with
AgPd contacts, suitable for use in low
level load analog circuits.
6. Outstanding vibration and shock
resistance.
Functional shock resistance: 750 m/s2
Destructive shock resistance:
1,000 m/s2
• Creepage distance: 2.5 mm .098 inch
or more
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3.3 mm .130 inch)
ORDERING INFORMATION
TXD
2
Contact arrangement
2: 2 Form C
Surface-mount availability
Nil: Standard PC board terminal
SA: SA type
SS: SS type
Operating function
Nil: Single side stable L: 1 coil latching L2: 2 coil latching
Type of operation
Nil: Standard type
2M: M.B.B. type
Nominal coil voltage (DC)
1.5, 3, 4.5, 5, 6, 9, 12, 24V
Contact material
Nil: Standard contact (Ag+Au clad)
1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable)
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/3/4/5-pin side)
Z: Tape and reel packing (Picked from the 8/9/10/12-pin side)
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
ds_61022_en_txd: 280114D
1
TX-D
TYPES
1. Standard (B.B.M.) type
1) Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2-1.5V
TXD2-3V
TXD2-L-1.5V
TXD2-L-3V
TXD2-L-4.5V
TXD2-L-5V
TXD2-L-6V
TXD2-L-9V
TXD2-L-12V
TXD2-L-24V
4.5V DC
5V DC
TXD2-4.5V
TXD2-5V
2 Form C
6V DC
TXD2-6V
9V DC
TXD2-9V
12V DC
24V DC
TXD2-12V
TXD2-24V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2S-1.5V
TXD2S-3V
TXD2S-4.5V
TXD2S-5V
TXD2S-6V
TXD2S-9V
TXD2S-12V
TXD2S-24V
TXD2S-L-1.5V
TXD2S-L-3V
TXD2S-L-4.5V
TXD2S-L-5V
TXD2S-L-6V
TXD2S-L-9V
TXD2S-L-12V
TXD2S-L-24V
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
(2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2S-1.5V-Z
TXD2S-3V-Z
TXD2S-4.5V-Z
TXD2S-5V-Z
TXD2S-6V-Z
TXD2S-9V-Z
TXD2S-12V-Z
TXD2S-24V-Z
TXD2S-L-1.5V-Z
TXD2S-L-3V-Z
TXD2S-L-4.5V-Z
TXD2S-L-5V-Z
TXD2S-L-6V-Z
TXD2S-L-9V-Z
TXD2S-L-12V-Z
TXD2S-L-24V-Z
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-1” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-1-Z)
ds_61022_en_txd: 280114D
2
TX-D
2. M.B.B type
1) Standard PC board terminal
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
TXD2-2M-1.5V
TXD2-2M-3V
TXD2-2M-4.5V
TXD2-2M-5V
TXD2-2M-6V
TXD2-2M-9V
TXD2-2M-12V
TXD2-2M-24V
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
2) Surface-mount terminal
(1) Tube packing
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
TXD2S-2M-1.5V
TXD2S-2M-3V
TXD2S-2M-4.5V
TXD2S-2M-5V
TXD2S-2M-6V
TXD2S-2M-9V
TXD2S-2M-12V
TXD2S-2M-24V
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
(2) Tape and reel packing
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
TXD2S-2M-1.5V-Z
TXD2S-2M-3V-Z
TXD2S-2M-4.5V-Z
TXD2S-2M-5V-Z
TXD2S-2M-6V-Z
TXD2S-2M-9V-Z
TXD2S-2M-12V-Z
TXD2S-2M-24V-Z
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Types designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load. (Ex. TXD2SA-2M-1.5V-1-Z)
2. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
ds_61022_en_txd: 280114D
3
TX-D
RATING
1. Coil data
[Standard (B.B.M.) type]
1) Single side stable
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Nominal operating current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating Max. applied voltage
power
200mW
230mW
(at 20C 68F)
1.5V DC
3V DC
132.7mA
66.7mA
44.4mA
40.0mA
33.3mA
22.2mA
16.7mA
9.6mA
11
45
4.5V DC
5V DC
101
125
180
405
720
2,504
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
120%V of
nominal voltage
6V DC
9V DC
12V DC
24V DC
2) 1 coil latching
Nominal coil
Set voltage
Reset voltage
Nominal operating current
Coil resistance
Nominal operating Max. applied voltage
voltage
1.5V DC
3V DC
(at 20C 68F)
(at 20C 68F)
[10%] (at 20C 68F)
[10%] (at 20C 68F)
power
150mW
170mW
(at 20C 68F)
100.0mA
50.0mA
33.3mA
30.0mA
25.0mA
16.7mA
12.5mA
7.1mA
15
60
4.5V DC
5V DC
135
166
240
540
960
3,388
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
120%V of
nominal voltage
6V DC
9V DC
12V DC
24V DC
[M.B.B. type]
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Nominal operating current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating Max. applied voltage
power
250mW
270mW
(at 20C 68F)
1.5V DC
3V DC
166.7mA
83.3mA
55.6mA
50.0mA
41.7mA
27.8mA
20.8mA
11.3mA
9
36
4.5V DC
5V DC
81
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
100
144
324
576
2,133
120%V of
nominal voltage
6V DC
9V DC
12V DC
24V DC
*Pulse drive (JIS C 5442-1986)
*Only for surge breakdown voltage of 2,500 V.
ds_61022_en_txd: 280114D
4
TX-D
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C
2 Form D (M.B.B.type)
Contact resistance (Initial)
Max. 100 m (By voltage drop 6 V DC 1A)
Contact
Standard contact: Ag+Au clad,
AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)
Contact material
Standard contact: 2 A 30 V DC,
1 A 30 V DC (resistive load)
Nominal switching capacity
Max. switching power
AgPd contact: 1 A 30 V DC (resistive load)
Standard contact: 60 W (DC),
30 W (DC) (resistive load)
AgPd contact: 30 W (DC) (resistive load)
Max. switching voltage
220 V DC
110 V DC
1 A
Rating
Max. switching current
Standard contact: 2 A, AgPd contact: 1 A
Min. switching capacity (Reference value)*1
10A10mV DC
Single side stable
1 coil latching
200mW (1.5 to 12 V DC), 230mW (24 V DC)
150mW (1.5 to 12 V DC), 170mW (24 V DC)
250mW (1.5 to 12 V DC), 270mW (24 V DC)
—
Nominaloperating
power
Insulation resistance (Initial)
Min. 1,000M (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
Between open contacts
1,000 Vrms for 1min. (Detection current: 10mA)
3,000 Vrms for 1min. (Detection current: 10mA)
500 Vrms for 1min. (Detection current: 10mA)
3,000 Vrms for 1min. (Detection current: 10mA)
Breakdown
voltage (Initial)
Between contact and coil
Between contact sets
Between open contacts
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10160s) (FCC Part 68)
—
Surge breakdown
voltage (Initial)
Between contacts and
coil*1
Electrical
characteristics
6,000 V, 1.2 50s
Max. 50C 122F
(By resistive method, nominal coil voltage applied to the coil;
contact carrying current: 2A [1A: M.B.B.].)
Temperature rise (at 20C 68F)
Operate time [Set time] (at 20C 68F)
Release time [Reset time] (at 20C 68F)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Min. 750 m/s2
Min. 500 m/s2
Functional
(Half-wave pulse of sine wave: 6 ms;
detection time: 10s.)
(Half-wave pulse of sine wave: 11 ms;
detection time: 10s.)
Shock
resistance
Mechanical
characteristics
Destructive
Functional
Destructive
Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
Vibration
resistance
10 to 55 Hz at double amplitude of 5 mm
Mechanical
Electrical
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
Min. 5105 (1 A 30 V DC resistive) (at 20 cpm)
Min. 107 (at 180 cpm)
Expected life
Min. 105 (1 A 30 V DC resistive) (at 20 cpm)
Conditions for operation, transport and
storage*2
Ambient temperature: –40C to +85C –40F to +185F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
Max. operating speed (at rated load)
20 cpm
Approx. 2 g .071 oz
*1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual
load. (AgPd contact type is available for low level load switching.)
*2 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TXD2-5V, 10 pcs.
Operating speed: 180 cpm
100
90
3.0
2.0
100
50
Pick-up voltage
Drop-out voltage
80
70
60
50
40
30
20
10
0
Max.
Min.
DC resistive load
1.0
30
20
30V DC
0.5
0.4
resistive load
Max.
Min.
0.3
10
0
0.2
1.0
2.0
0
20 30 50
100
200 300
0
10
100
1000
10000
No. of operations, ×104
Switching current, A
Contact voltage, V
ds_61022_en_txd: 280114D
5
TX-D
4. Electrical life (2 A 30 V DC resistive load)
5-(1). Coil temperature rise
Tested sample: TXD2-5V, 6 pcs.
Operating speed: 20 cpm
Tested sample: TXD2-5V, 6 pcs.
Measured portion: Inside the coil
Ambient temperature: 25C 77F, 70C 158F
Change of pick-up and drop-out voltage
Change of contact resistance
70
100
90
100
90
80
70
60
50
40
30
20
10
0
+25°C +77°F
+70°C +158°F
60
50
40
30
20
10
0
Pick-up voltage
Drop-out voltage
80
70
60
50
40
30
20
10
0
Max.
Min.
Max.
Min.
2A
2A
Max.
Min.
0A
0A
100
110
120
0
2
4
6
8
10
0
2
4
6
8
10
No. of operations, ×104
No. of operations, ×104
Coil applied voltage, %V
5-(2). Coil temperature rise
Tested sample: TXD2-24V, 6 pcs.
Measured portion: Inside the coil
6-(1). Operate/release time characteristics
(with diode)
Tested sample: TXD2-5V, 10 pcs.
6-(2). Operate/release time characteristics
(without diode)
Tested sample: TXD2-5V, 10 pcs.
Ambient temperature: 25C 77F, 70C 158F
70
5
5
+25°C +77°F
+70°C +158°F
Operate time
Release time
Operate time
Release time
60
50
40
30
20
10
0
4
4
Max.
Max.
Min.
3
Min.
3
2A
2A
Max.
2
0A
0A
2
Min.
Max.
Min.
1
1
0
0
100
110
120
70
80
90
100 110 120
70
80
90
100 110 120
Coil applied voltage, %V
Coil applied voltage, %V
Coil applied voltage, %V
7. Ambient temperature characteristics
Tested sample: TXD2-5V, 5 pcs.
8. High-frequency characteristics
(Isolation)
9. High-frequency characteristics
(Insertion loss)
Tested sample: TXD2-12V, 2 pcs.
Tested sample: TXD2-12V, 2 pcs.
40
x
20
100
50
Drop-out voltage
x
1.0
0.8
0.6
0.4
0.2
Pick-up voltage
-40 -20
0
20 40 60 80
Ambient temperature, °C
-20
-40
0
10
100
1,000
0
10
100
1,000
Frequency, MHz
Frequency, MHz
10. Malfunctional shock (single side stable)
Tested sample: TXD2-5V, 6 pcs
11-(1). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
11-(2). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
Deenergized
X
Z
X'
ON
Y
condition
Z'
5
0
5
ON ON
Y
2
Energized condition
1000m/s
Pick-up voltage
Y'
0
Pick-up voltage
X
Z
ON
2
2
1000m/s
1000m/s
-5
-5
ON
ON
OFF
OFF OFF
5
0
5
2
2
1000m/s
Z'
1000m/s
X'
Drop-out voltage
0
Drop-out voltage
OFF
2
1000m/s
Y'
-5
OFF
-5
OFF
0
2
4
6
8
10
0
2
4
6
8
10
.079.157.236.315.394
Inter-relay distance , mm inch
.079.157.236.315.394
Inter-relay distance , mm inch
ds_61022_en_txd: 280114D
6
TX-D
12. Actual load test (35 mA 48 V DC wire spring
relay load)
Tested sample: TXD2-5V, 6 pcs.
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
100
90
80
70
60
50
40
30
20
10
0
80
Circuit
Pick-up voltage
Max.
Min.
70
60
50
458 Ω
+
0.08
F
0.08
F
4
3
48 V DC
Drop-out voltage
40
TXD
Max.
Min.
30
20
10
0
Max.
Min.
–
458 Ω
Wire spring relay
0
10
20
30
40
50
0
10
20
30
40
50
No. of operation, ×104
No. of operation, ×104
13-(1). Distribution of M.B.B. time
Tested sample: TXD2-2M-5V, 50 pcs.
Terminal No. 3-4-5: ON
Terminal No. 3-4-5: OFF
60
60
x:
300.5 μs
x:
298.8 μs
σn-1: 55.3 μs
Min.: 165 μs
Max.: 415 μs
σn-1: 51.8 μs
Min.: 205 μs
Max.: 432 μs
50
40
30
20
10
0
50
40
30
20
22
16
13
12
12
10
8
7
6
2
1
1
0
100 150 200 250 300 350 400 μs min.
150 200 250 300 350 400 450 μs max.
100 150 200 250 300 350 400 μs min.
150 200 250 300 350 400 450 μs max.
13-(2). Distribution of M.B.B. time
Tested sample: TXD2-2M-5V, 50 pcs.
Terminal No. 8-9-10: ON
14. Surge breakdown voltage test
Tested sample: TXD2-3V-6, 30 pcs.
Terminal No. 8-9-10: OFF
60
60
50
40
30
20
10
0
14
12
10
8
x:
293.4 μs
x:
281.4 μs
σn-1: 60.4 μs
Min.: 155 μs
Max.: 445 μs
σn-1: 58.3 μs
Min.: 120 μs
Max.: 421 μs
50
40
30
20
10
0
6
19
18
15
4
10
10
6
2
0
5
4
4
4
3
1
1
100 150 200 250 300 350 400 μs min.
150 200 250 300 350 400 450 μs max.
100 150 200 250 300 350 400 μs min.
150 200 250 300 350 400 450 μs max.
7000 7200 7400 7600 7800 8000 8200 8400 8600
Surge breakdown voltage, V
ds_61022_en_txd: 280114D
7
TX-D
DIMENSIONS (mm inch)
Download CADData from our Web site.
1) Standard PC board terminal
External dimensions
Standard PC board terminal
PC board pattern
(Bottom view)
Schematic (Bottom view)
Single side stable
1 coil latching
CAD Data
1
3
4
5
1
3
4
5
8
15.00
.591
7.40
.291
10.16
.400
2.54
+
−
+
.100
0.65
8.20
.026
.323
5.08
.200
−
12
10
9
8
12
10
9
0.50
.020
0.25
.010
Direction indication
Direction indication
8-1.0 dia.
8-.039 dia.
5.08
.200
1.15 5.08
.045 .200
2.54
.100
3.50
.138
(Deenergized condition)
(Reset condition)
Tolerance: 0.1 .004
2) Surface-mount terminal
CAD Data
External dimensions (General tolerance: 0.3 .012)
Suggested mounting pad (Top view) (Tolerance: 0.1 .004)
Type
Single side stable and 1 coil latching
Single side stable and 1 coil latching
5.08 2.54
.200
15
.591
7.4
.100
3.16
.124
.291
1
.039
8.2
.323
8.4
.331
0.25
.010
SA type
7.24
.285
0.65
.026
5.08
.200
9.4 0.5
0.5
5.08
.200
.020
2.54
.100
.370 .020
15
.591
7.4
5.08 2.54
.291
.100
.200
1
.039
2.16
.085
8.2
.323
Max.10
.394
SS type
0.25
.010
6.24
.246
0.65
.026
5.08
.200
7.4 0.5
0.5
.020
5.08
.200
2.54
.100
.291 .020
Schematic (Top view)
Single side stable
1 coil latching
12
10
9
8
12
10
9
8
5
−
+
−
+
1
3
4
5
1
3
4
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
ds_61022_en_txd: 280114D
8
TX-D
NOTES
1. Packing style
(2) Dimensions of plastic reel
Avoid chucking the center of the relay.
mm inch
1) Tube packing
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
21 0.6 dia.
.827 .024 dia.
3. M.B.B. type
0.5
2.0
.020
A small OFF time may be generated by
the contact bounce during contact
switching. Check the actual circuit
carefully.
If the relay is dropped accidentally, check
the appearance and characteristics
including M.B.B. time before use.
.079
Orientation (indicates PIN No.1) stripe
80 1 dia.
3.150 .039 dia.
380 2 dia.
14.961 .079 dia.
13 0.5 dia.
Stopper (gray)
Stopper (green)
.512 .020 dia.
24.4+02
2.0 0.2
.961+0.079
2) Tape and reel packing (surface-mount
terminal type)
(1) Tape dimensions
(i) SA type
.079 .008
Min. 10μs
3) Ambient temperature when
transporting and during storage with the
product in its original packaging:
–40 to +70C –40 to +158F
mm inch
1.5+0.1 dia.
0
.059+.004 dia.
Relay polarity bar
(Z type)
2. Automatic insertion
1.75
.069
0
0.4
.016
2.0
4.0
.079 .157
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
500Ω
C
A
B
11.5
.453
15.5
.610
5V DC
10.0 .D394
16.0
.630
0.3
24.0
.945
9.2 0.2
TX-D relays
.012
C
.362 .008
B
A
Measuring condition of M.B.B. time
Tape coming out direction
(ii) SS type
mm inch
1.5+0.1 dia.
0
.059+.004 dia.
Relay polarity bar
(Z type)
2.0
4.0
1.75
.069
0
0.4
.016
.079 .157
Chucking pressure in the direction A:
4.9 N {500gf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
11.5
.453
15.5
.610
0.3
16.0
.630
8.0 24.0
.01210.8 0.2
.425 .008
TX-D relays
.945
.315
Tape coming out direction
Please chuck the
portion.
For Cautions for Use, see Relay Technical Information.
ds_61022_en_txd: 280114D
9
相关型号：
TXD2SS-1.5V-6
Power/Signal Relay, DPDT, Momentary, 0.188A (Coil), 1.5VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SS-1.5V-6-Z
Power/Signal Relay, DPDT, Momentary, 0.188A (Coil), 1.5VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SS-1.5V-X
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.133A (Coil), 1.5VDC (Coil), 200mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight,
PANASONIC
TXD2SS-1.5V-Z
Power/Signal Relay, DPDT, Momentary, 0.188A (Coil), 1.5VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SS-12V
Power/Signal Relay, DPDT, Momentary, 0.023A (Coil), 12VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SS-12V-3
Power/Signal Relay, DPDT, Momentary, 0.023A (Coil), 12VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SS-12V-4
Power/Signal Relay, DPDT, Momentary, 0.023A (Coil), 12VDC (Coil), 280mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SS-12V-6
Power/Signal Relay, DPDT, Momentary, 0.023A (Coil), 12VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明