TQ2SL-L-9V-X [PANASONIC]
Power/Signal Relay, DPDT, Latched, 0.008A (Coil), 9VDC (Coil), 70mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight,;型号: | TQ2SL-L-9V-X |
厂家: | PANASONIC |
描述: | Power/Signal Relay, DPDT, Latched, 0.008A (Coil), 9VDC (Coil), 70mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, 光电二极管 继电器 |
文件: | 总11页 (文件大小:295K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
5 mm Low profile,
2 Form C and 2 A (surface-
mount type) relays
TQ RELAYS
FEATURES
1. Flat compact size
8. A range of surface-mount types is
also available
SA: Low-profile surface-mount
terminal type
SL: High connection reliability surface-
mount terminal type
14.0 (L) × 9.0 (W) × 5.0 (H) mm
.551 (L) × .354 (W) × .197 (H) inch
2. Nominal operating power:
High sensitivity of 140mW (2 Form
C single side stable type)
3. Suitable for SMD automatic
insertion (SA type)
SS: Space saving surface-mount
terminal type
With a height of 5.6 mm .220 inch, the
relays meet JIS C 0806 specifications.
4. DIL terminal array enables use of IC
sockets
5. Low thermal electromotive force
(approx. 5 μV)
9. M.B.B. contact types available
RoHS compliant
TYPICAL APPLICATIONS
1. Telephone-related equipment
2. Communications
[approx. 2 μV (surface-mount type)]
6. Latching types also available
7. Self-clinching terminal also
available
3. Measurement equipment
4. OA equipment
5. Industrial machines
ORDERING INFORMATION
TQ 2
Contact arrangement
2: 2 Form C
Terminal shape
Nil: Standard PC board terminal
H: Self-clinching terminal
SA: SA type
SL: SL type
SS: SS type
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
MBB function
Nil: Standard (B.B.M.) type
2M: 2M.B.B. type
Nominal coil voltage (DC)*
1.5 (SMD only), 3, 4.5, 5, 6, 9, 12, 24, 48V
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/2/3/4/5-pin side)
Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side)
Notes: 1. *48 V coil type: Single side stable only
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
ASCTB14E 201407-T
–1–
TQ
TYPES
■ Standard PC board terminal and self-clinching terminal
1. Standard (B.B.M.) type
1) Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
3
V DC
TQ2-3V
TQ2-L-3V
TQ2-L-4.5V
TQ2-L-5V
TQ2-L-6V
TQ2-L-9V
TQ2-L-12V
TQ2-L-24V
—
TQ2-L2-3V
TQ2-L2-4.5V
TQ2-L2-5V
TQ2-L2-6V
TQ2-L2-9V
TQ2-L2-12V
TQ2-L2-24V
—
4.5 V DC
TQ2-4.5V
TQ2-5V
5
6
9
V DC
V DC
V DC
TQ2-6V
2 Form C
TQ2-9V
12 V DC
24 V DC
48 V DC
TQ2-12V
TQ2-24V
TQ2-48V
Standard packing (2 Form C): Tube: 50 pcs.; Case: 1,000 pcs.
2) Self-clinching terminal
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
3
V DC
TQ2H-3V
TQ2H-L-3V
TQ2H-L-4.5V
TQ2H-L-5V
TQ2H-L-6V
TQ2H-L-9V
TQ2H-L-12V
TQ2H-L-24V
—
TQ2H-L2-3V
TQ2H-L2-4.5V
TQ2H-L2-5V
TQ2H-L2-6V
TQ2H-L2-9V
TQ2H-L2-12V
TQ2H-L2-24V
—
4.5 V DC
TQ2H-4.5V
TQ2H-5V
5
6
9
V DC
V DC
V DC
TQ2H-6V
2 Form C
TQ2H-9V
12 V DC
24 V DC
48 V DC
TQ2H-12V
TQ2H-24V
TQ2H-48V
Note: Types (“-3” to the end of part No.) designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load.
2. M.B.B. type
1) Standard PC board terminal
Single side stable
Contact arrangement
Nominal coil voltage
Part No.
3
V DC
TQ2-2M-3V
TQ2-2M-4.5V
TQ2-2M-5V
TQ2-2M-6V
TQ2-2M-9V
TQ2-2M-12V
TQ2-2M-24V
4.5 V DC
5
6
9
V DC
V DC
V DC
2 Form C
12 V DC
24 V DC
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2) Self-clinching terminal
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
3
V DC
TQ2H-2M-3V
TQ2H-2M-4.5V
TQ2H-2M-5V
TQ2H-2M-6V
TQ2H-2M-9V
TQ2H-2M-12V
TQ2H-2M-24V
4.5 V DC
5
6
9
V DC
V DC
V DC
2 Form C
12 V DC
24 V DC
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
Notes: 1. Latching types are available by request. Please consult us for details.
2. UL/CSA approved (UL file No.:E 43149, CSA file No.: LR26550)
3. Types (“-1” to the end of part No.) designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load and low thermal power.
ASCTB14E 201407-T
–2–
TQ
■ Surface-mount terminal
1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5 V DC
TQ2Sꢀ-1.5V
TQ2Sꢀ-3V
TQ2Sꢀ-4.5V
TQ2Sꢀ-5V
TQ2Sꢀ-6V
TQ2Sꢀ-9V
TQ2Sꢀ-12V
TQ2Sꢀ-24V
TQ2Sꢀ-48V
TQ2Sꢀ-L-1.5V
TQ2Sꢀ-L-3V
TQ2Sꢀ-L-4.5V
TQ2Sꢀ-L-5V
TQ2Sꢀ-L-6V
TQ2Sꢀ-L-9V
TQ2Sꢀ-L-12V
TQ2Sꢀ-L-24V
—
TQ2Sꢀ-L2-1.5V
TQ2Sꢀ-L2-3V
TQ2Sꢀ-L2-4.5V
TQ2Sꢀ-L2-5V
TQ2Sꢀ-L2-6V
TQ2Sꢀ-L2-9V
TQ2Sꢀ-L2-12V
TQ2Sꢀ-L2-24V
—
3
V DC
4.5 V DC
5
6
9
V DC
V DC
V DC
2c
12 V DC
24 V DC
48 V DC
ꢀ: For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5 V DC
TQ2Sꢀ-1.5V-Z
TQ2Sꢀ-3V-Z
TQ2Sꢀ-4.5V-Z
TQ2Sꢀ-5V-Z
TQ2Sꢀ-6V-Z
TQ2Sꢀ-9V-Z
TQ2Sꢀ-12V-Z
TQ2Sꢀ-24V-Z
TQ2Sꢀ-48V-Z
TQ2Sꢀ-L-1.5V-Z
TQ2Sꢀ-L-3V-Z
TQ2Sꢀ-L-4.5V-Z
TQ2Sꢀ-L-5V-Z
TQ2Sꢀ-L-6V-Z
TQ2Sꢀ-L-9V-Z
TQ2Sꢀ-L-12V-Z
TQ2Sꢀ-L-24V-Z
—
TQ2Sꢀ-L2-1.5V-Z
TQ2Sꢀ-L2-3V-Z
TQ2Sꢀ-L2-4.5V-Z
TQ2Sꢀ-L2-5V-Z
TQ2Sꢀ-L2-6V-Z
TQ2Sꢀ-L2-9V-Z
TQ2Sꢀ-L2-12V-Z
TQ2Sꢀ-L2-24V-Z
—
3
V DC
4.5 V DC
5
6
9
V DC
V DC
V DC
2 Form C
12 V DC
24 V DC
48 V DC
ꢀ: For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
RATING
■ Standard PC board terminal and self-clinching terminal
1. Coil data
[Standard (B.B.M.) type]
1) Single side stable (2 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3
V DC
46.7 mA
31.1 mA
28.1 mA
23.3 mA
15.5 mA
11.7 mA
8.3 mA
64.3 Ω
144.6 Ω
4.5 V DC
5
6
9
V DC
V DC
V DC
178
257
Ω
Ω
Ω
Ω
Ω
140 mW
150%V of
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
nominal voltage
579
12 V DC
24 V DC
1,028
2,880
200 mW
300 mW
120%V of
nominal voltage
48 V DC
6.25 mA
7,680
Ω
2) 1 coil latching (2 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3
V DC
33.3 mA
22.2 mA
20 mA
16.7 mA
11.1 mA
8.3 mA
90
Ω
4.5 V DC
202.5 Ω
250
360
5
6
9
V DC
V DC
V DC
Ω
Ω
Ω
Ω
Ω
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
100 mW
150 mW
150%V of
nominal voltage
810
12 V DC
24 V DC
1,440
3,840
6.3 mA
ASCTB14E 201407-T
–3–
TQ
3) 2 coil latching (2 Form C)
Nominal operating
current
[ 10%] (at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
Set coil
66.7 mA
44.4 mA
40 mA
33.3 mA
22.2 mA
16.7 mA
Reset coil
66.7 mA
44.4 mA
40 mA
33.3 mA
22.2 mA
16.7 mA
Set coil
Reset coil
45
101.2 Ω
Set coil
Reset coil
3
V DC
45
Ω
Ω
4.5 V DC
101.2 Ω
5
6
9
V DC
V DC
V DC
125
180
405
720
Ω
Ω
Ω
Ω
125
180
405
720
Ω
Ω
Ω
Ω
150%V of
nominal voltage
200 mW
200 mW
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
12 V DC
120%V of
nominal voltage
24 V DC
12.5 mA
12.5 mA
1,920
Ω
1,920
Ω
300 mW
300 mW
[M.B.B. type]
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3
V DC
66.7 mA
44.4 mA
40 mA
33.3 mA
22.2 mA
16.7 mA
8.3 mA
45 Ω
101 Ω
125 Ω
180 Ω
405 Ω
720 Ω
2,880 Ω
4.5 V DC
5
6
9
V DC
V DC
V DC
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
150%V of
nominal voltage
200 mW
12 V DC
24 V DC
*Pulse drive (JIS C 5442-1986)
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C, 2 Form D (M.B.B.)
Contact
Rating
Initial contact resistance, max.
Contact material
Max. 50mΩ (By voltage drop 6 V DC 1A)
Ag+Au clad
Nominal switching capacity
Max. switching power
1 A 30 V DC, 0.5 A 125 V AC (resistive load)
30 W (DC), 62.5 V A (AC) (resistive load)
110 V DC, 125 V AC
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*1
1 A
10μA 10mV DC
Standard (B.B.M) type: 140 mW (3 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC)
M.B.B. type: 200 mW
Single side stable
Nominal
operating power 1 coil latching
100 mW (3 to 12 V DC), 150 mW (24 V DC)
200 mW (3 to 12 V DC), 300 mW (24 V DC)
2 coil latching
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Insulation resistance (Initial)
Standard (B.B.M) type: 750 Vrms for 1min. (Detection current: 10 mA),
M.B.B. type: 300 Vrms for 1 min. (Detection current: 10 mA)
Between open contacts
Breakdown
voltage (Initial)
Between contact and coil
1,000 Vrms for 1min. (Detection current: 10 mA)
Electrical
characteristics
Between contact sets
1,000 Vrms for 1min. (Detection current: 10 mA)
Temperature rise (at 20°C 68°F)
Operate time [Set time] (at 20°C 68°F)
Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Release time [Reset time] (at 20°C 68°F)
Functional
Shock
Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
resistance
Destructive
Functional
Destructive
Mechanical
characteristics
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 5 mm
Vibration
resistance
Mechanical (at 180 cpm)
Standard (B.B.M) type: Min. 108, M.B.B. type: Min. 107
Standard (B.B.M) type: Min. 2×105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive)
Expected life
Electrical (at 20 cpm)
M.B.B. type: Min. 105 (1 A 30 V DC resistive)
Standard (B.B.M) type:
Ambient temperature: –40°C to +70°C –40°F to +158°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
M.B.B. type:
Ambient temperature: –40°C to +50°C –40°F to +122°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions for operation, transport and
storage*2
Conditions
Unit weight
Max. operating speed (at rated load)
20 cpm
Approx. 1.5 g .053 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. TX/TX-S/TX-D relay AgPd contact type are available for low level load switching (10V DC, 10mA max. level).
*2 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES.
ASCTB14E 201407-T
–4–
TQ
■ Surface-mount terminal
1. Coil data
1) Single side stable
Nominal operating
current
(at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5 V DC
93.8 mA
46.7 mA
31 mA
28.1 mA
23.3 mA
15.5 mA
11.7 mA
8.3 mA
16
Ω
3
V DC
64.3 Ω
145
4.5 V DC
Ω
Ω
Ω
Ω
Ω
Ω
5
6
9
V DC
V DC
V DC
178
257
140 mW
150%V of
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
nominal voltage
579
12 V DC
24 V DC
1,028
2,880
200 mW
300 mW
120%V of
nominal voltage
48 V DC
6.3 mA
7,680
Ω
2) 1 coil latching
Nominal operating
current
(at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5 V DC
46.9 mA
23.3 mA
15.6 mA
14 mA
11.7 mA
7.8 mA
32
Ω
3
V DC
128.6 Ω
289.3 Ω
357
514
4.5 V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
5
6
9
V DC
V DC
V DC
Ω
Ω
Ω
Ω
Ω
70 mW
150%V of
nominal voltage
1,157
2,057
5,760
12 V DC
24 V DC
5.8 mA
4.2 mA
100 mW
3) 2 coil latching
Nominal operating
current
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Max. applied voltage
(at 20°C 68°F)
Set coil
93.8 mA
46.7 mA
31 mA
28.1 mA
23.3 mA
15.5 mA
11.7 mA
8.3 mA
Reset coil
93.8 mA
46.7 mA
31 mA
28.1 mA
23.3 mA
15.5 mA
11.7 mA
8.3 mA
Set coil
Reset coil
16
64.3 Ω
Set coil
140 mW
200 mW
Reset coil
140 mW
200 mW
1.5 V DC
16
Ω
Ω
3
V DC
64.3 Ω
4.5 V DC
145
Ω
Ω
Ω
Ω
Ω
Ω
145
Ω
Ω
Ω
Ω
Ω
Ω
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
5
6
9
V DC
V DC
V DC
178
257
178
257
150%V of
nominal voltage
579
579
12 V DC
24 V DC
1,028
2,880
1,028
2,880
*Pulse drive (JIS C 5442-1986)
ASCTB14E 201407-T
–5–
TQ
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C
Contact
Initial contact resistance, max.
Contact material
Max. 75 mΩ (By voltage drop 6 V DC 1A)
AgNi type+Au clad
Nominal switching capacity
Max. switching power
2 A 30 V DC, 0.5 A 125 V AC (resistive load)
60 W (DC), 62.5 VA (AC) (resistive load)
220 V DC, 125 V AC
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*1
2 A
Rating
10μA 10mV DC
Single side stable
140 mW (1.5 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC)
70 mW (1.5 to 12 V DC), 100 mW (24 V DC)
140 mW (1.5 to 12 V DC), 200 mW (24 V DC)
Nominal operating
1 coil latching
power
2 coil latching
Insulation resistance (Initial)
Between open contacts
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
1,500 Vrms for 1 min. (Detection current: 10 mA)
1,500 Vrms for 1 min. (Detection current: 10 mA)
1,500 V (10×160μs) (FCC Part 68)
Breakdown voltage
Between contact and coil
(Initial)
Between contact sets
Between open contacts
Surge breakdown
voltage (Initial)
Electrical
characteristics
Between contacts and coil
2,500 V (2×10μs) (Bellcore)
Max. 50°C
Temperature rise (at 20°C 68°F)
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Functional
Shock resistance
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10μs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive), Min. 2×105 (1 A 30 V DC resistive),
Expected life
Electrical
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Ambient temperature:
Conditions for operation, transport and storage*2
Max. operating speed (at rated load)
–40°C to +85°C –40°F to +185°F, Max. –40°C to +70°C (2A) Max. –40°F to +158°F (2A);
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
20 cpm
Approx. 2 g .071 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level])
*2 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES.
ASCTB14E 201407-T
–6–
TQ
REFERENCE DATA
■ Standard PC board terminal and self-clinching terminal
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TQ2-12V, 10 pcs.
100
90
DC load (cosϕ=1)
AC load (cosϕ=1)
30 V DC resistive load
125 V AC resistive load
80
100
10
Pick-up voltage
Max.
1.0
70
60
50
Min.
0.5
0.4
40
Drop-out voltage
30
0.3
Max.
Min.
0.2
20
10
0
0
0.5
1.0
10
100
1,000
10,000
30
100
200
4
Switching current, A
No. of operations, ×10
Switching voltage,V
4.-(1) Electrical life (DC load)
Tested sample: TQ2-12V, 6 pcs.
4.-(2) Electrical life (AC load)
Tested sample: TQ2-12V, 6 pcs.
Condition: 1 A 30 V DC resistive load, 20 cpm
Condition: 0.5 A 125 V AC resistive load, 20 cpm
Change of pick-up and drop-out voltage
Change of contact resistance
Change of pick-up and drop-out voltage
100
90
100
90
100
90
80
70
60
80
70
60
80
Pick-up voltage
Max.
Min.
Pick-up voltage
Drop-out voltage
Max.
Min.
70
60
50
40
50
40
50
40
Max.
Min.
Drop-out voltage
Max.
Min.
Max.
Min.
30
20
10
30
20
10
30
20
10
0
5
10
15
20
0
5
10
0
5
10
15
20
4
4
4
No. of operations, ×10
No. of operations, ×10
No. of operations, ×10
5. Coil temperature rise (2C)
Tested sample: TQ2-12V
6. Ambient temperature characteristics
Tested sample: TQ2-12V, 5 pcs.
Measured portion: Inside the coil
Ambient temperature: 30°C 86°F
Change of contact resistance
40
30
70
100
90
80
70
60
Nominal coil voltage
3 to 12 V DC type
24 V DC type
60
50
40
30
20
Drop-out
voltage
x
x
20
10
1 A
Pick-up voltage
20 40 60 80
1 A
0 A
-40 -20
0
50
40
Ambient
temperature,°C
-10
Max.
Min.
30
20
10
-20
10
0
-30
-40
0
5
10
100 110 120 130 140 150
Coil applied voltage, %V
4
No. of operations, ×10
7.-(1) High-frequency characteristics
(Isolation)
7.-(2) High-frequency characteristics
(Insertion loss)
8. Malfunctional shock (single side stable)
Tested sample: TQ2-12V, 6 pcs.
,
Deenergized
condition
Energized condition
X X
Z
,
Y
Z
,
2
980m/s
Y
Y
X
Z
100
50
2
2
980m/s
980m/s
1.0
0.8
2
2
980m/s
0.6
0.4
0.2
980m/s
,
,
Z
X
2
980m/s
Y
,
0
10
100
1,000
10
100
1,000
Frequency, MHz
Frequency, MHz
ASCTB14E 201407-T
–7–
TQ
9.-(1) Influence of adjacent mounting
9.-(2) Influence of adjacent mounting
10. Contact reliability
(1 mA 5 V DC resistive load)
Tested sample: TQ2-12V
Condition: Detection level 10 W
F(t), %
99.9
99.0
95.0
ON
ON
10
0
10
0
ON ON
Pick-up voltage
Drop-out voltage
Pick-up voltage
Drop-out voltage
70.0
50.0
30.0
–10
–10
ON
ON
10.0
5.0
OFF OFF
10
0
10
0
OFF
2.0
m=2.15
1.0
0.5
7
μ=2.7×10
95% reliability limit =
OFF
6
OFF
7.6×10
–10
–10
0.2
0.1
(Weibull probability paper)
OFF
1.0
10
100
0
5
0
5
.197
.197
6
Inter-relay distance , mm inch
No. of operations, ×10
Inter-relay distance , mm inch
11. Actual load test (35 mA 48 V DC wire spring relay load)
Circuit
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
100
20Hz
90
80
70
80
Pick-up voltage
70
Max.
Min.
220Ω
220Ω
60
50
40
60
50
40
30
20
10
0
57 V
DC
Max.
Min.
30
Drop-out voltage
Max.
Min.
20
10
0
Wire spring relay Circuit diagram
10
20
30
40
50
10
20
30
40
50
4
4
No. of operations, ×10
No. of operations, ×10
12. 0.1 A 53 V DC resistive load test
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
100
90
80
70
60
50
40
30
20
10
80
Pick-up voltage
Max.
70
60
50
40
30
20
10
Min.
Max.
Min.
Drop-out voltage
Max.
Min.
0
500
1,000
1,500
2,000
0
500
1,000
1,500
2,000
4
4
No. of operations, ×10
No. of operations, ×10
13. Distribution of M.B.B. time
Tested sample: TQ2-2M-5V, 85 pcs.
60
60
50
40
30
20
Terminal Nos. 2-3-4: ON
Terminal Nos. 2-3-4: OFF
−
−
x:
x:
105.6 μs
71.6 μs
3σn-1: 163.8 μs
3σn-1: 127.1 μs
Min.: 17 μs
50
40
30
20
Min.: 23 μs
Max.: 243 μs
Max.: 187 μs
41
31
Terminal Nos. 7-8-9: ON
Terminal Nos. 7-8-9: OFF
−
−
35
27
x:
115.6 μs
x:
80.7 μs
3σn-1: 167.3 μs
Min.: 35 μs
3σn-1: 156.7 μs
Min.: 29 μs
30
19
26
21
Max.: 254 μs
Max.: 298 μs
19
15
17
11
12
10
7
4
10
0
10
0
6
2
1
2
4
10
50 100 150 200 250 300 μs min.
10
50 100 150 200 250 300 μs min.
50 100 150 200 250 300 350 μs max.
50 100 150 200 250 300 350 μs max.
ASCTB14E 201407-T
–8–
TQ
■ Surface-mount terminal
1. Maximum switching capacity
2. Life curve
3. Mechanical life (mounting by IRS method)
Tested sample: TQ2SA-12V, 10 pcs.
100
90
3.0
2.0
100
50
80
Pick-up voltage
70
DC resistive load
Max.
Min.
1.0
60
50
40
30
20
125V AC
resistive load
30V DC
resistive load
AC resistive load
0.5
0.4
Drop-out voltage
0.3
30
Max.
Min.
10
0
20
10
0
0.2
0
20 30 50
100
200 300
1.0
2.0
IRS1
10
100
1,000 10,000
No. of operations, ×104
Switching current, A
Contact voltage, V
4.-(1) Electrical life (2 A 30 V DC resistive load)
4.-(2) Electrical life (0.5 A 125V AC resistive load)
Tested sample: TQ2SA-12V, 6 pcs.
Operating speed: 20 cpm
Change of pick-up and drop-out voltage
(mounting by IRS method)
Tested sample: TQ2SA-12V, 6 pcs
Operating speed: 20 cpm
Change of pick-up and drop-out voltage
(mounting by IRS method)
Change of contact resistance
(mounting by IRS method)
100
90
100
90
80
70
60
50
40
30
20
10
0
100
90
80
80
Pick-up voltage
Pick-up voltage
Drop-out voltage
70
70
60
50
40
30
20
10
0
Max.
Max.
Min.
Min.
60
50
Max.
Min.
40
Drop-out voltage
30
Max.
Min.
Max.
Min.
20
10
0
IRS
1
2
3
4
5
6
7
8
9
10
IRS
1
2
3
4
5
6
7
8
9
10
IRS
1
2
3
4
5
6
7
8
9 10
No. of operations, ×104
No. of operations, ×104
No. of operations, ×104
5. Coil temperature rise
6. Operate/release time
Tested sample: TQ2SA-12V, 6 pcs.
Point measured: Inside the coil
Ambient temperature: 25°C 77°F
Tested sample: TQ2SA-12V, 6 pcs.
Change of contact resistance
(mounting by IRS method)
100
90
80
70
60
50
40
30
20
10
0
70
5
4
2A
0A
Coil voltage
Operate time
Release time
DC 12V type
DC 48V type
60
50
Max.
2A
0A
3
40
30
20
10
0
Min.
Max.
Min.
2
Max.
Min.
1
0
100 110 120 130 140 150
IRS
1
2
3
4
5
6
7
8
9 10
70
80
90
100 110 120
Coil applied voltage, %V
No. of operations, ×104
Coil applied voltage, %V
7. Ambient temperature characteristics
Tested sample: TQ2SA-12V, 5 pcs.
8.-(1) High-frequency characteristics
(Isolation)
8.-(2) High-frequency characteristics
(Insertion loss)
40
Pick-up voltage
x
20
100
50
1.0
0.8
0.6
0.4
0.2
Drop-out voltage
–40 –20
0
20 40 60 80
Ambient
temperature, °C
–20
–40
10
100
1,000
10
100
1,000
Frequency, MHz
Frequency, MHz
ASCTB14E 201407-T
–9–
TQ
9. Malfunctional shock (single side stable)
Tested sample: TQ2SA-12V, 6 pcs
10.-(1) Influence of adjacent mounting
Tested sample: TQ2SA-12V, 5 pcs.
10.-(2) Influence of adjacent mounting
Tested sample: TQ2SA-12V, 6 pcs.
Deenergized
condition
Energized
condition
X
Z
X'
1000m/s
ON
Z'
Y
10
10
0
ON ON
Y
2
Pick-up voltage
Y'
Pick-up voltage
0
X
Z'
ON
2
2
1000m/s
1000m/s
ON
–10
–10
ON
OFF
OFF OFF
10
10
0
2
2
1000m/s
Z
1000m/s
X'
Drop-out voltage
Drop-out voltage
0
OFF
2
1000m/s
Y'
OFF
–10
–10
OFF
0
1
2
3
4
5
6
0
1
2
3
4
5
6
.039.079.118.157.197.236
.039.079.118.157.197.236
Inter-relay distance , mm inch
Inter-relay distance , mm inch
11. Pulse dialing test
(35 mA 48 V DC wire spring relay load)
Tested sample: TQ2SA-12V, 6 pcs.
Circuit
Change of pick-up and drop-out voltage
(mounting by IRS method)
Change of contact resistance
(mounting by IRS method)
100
90
100
90
80
70
60
50
40
30
20
10
0
80
458 Ω
Pick-up voltage
Drop-out voltage
70
60
50
40
30
20
10
0
Max.
Min.
+
0.08
0.08
μF
TQ-SMD
relay
μF
3
48 V DC
2
Max.
Min.
–
Max.
Min.
458 Ω
Wire spring relay
IRS
10
20
30
40
50
IRS
10
20
30
40
50
No. of operations, ×104
No. of operations, ×104
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
1. Standard PC board terminal and Self-clinching terminal
CAD Data
External dimensions
PC board pattern (Bottom view)
Standard PC board terminal
10.16
.400
10-1.0 dia.
10-.039 dia.
2.54
.100
14
9
(4.75)
(.187)
.551
.354
+0.4
−0.2
5
.197
2.54
+.016
.100
7.62
−.008
.300
3.5
.138
0.5
.020
0.25
.010
0.25
.010
2.54
.100
7.62
.300
Tolerance: 0.1 .004
2-coil latching
Schematic (Bottom view)
1-coil latching
Self-clinching terminal
Single side stable
14
9
.354
(4.75)
(.187)
.551
+0.4
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
5
.197
−0.2
+
−
−
+
+.016
+
−
−.008
3.5
.138
−
+
0.5
0.25
.010
0.25
.010
10
9
8
7
6
10
9
8
7
6
10
9
8
7
6
.020
2.54
.100
7.62
.300
Direction indication
Direction indication
(Reset condition)
Direction indication
(Deenergized condition)
(Reset condition)
General tolerance: 0.3 .012
ASCTB14E 201407-T
–10–
TQ
2. Surface-mount terminal
CAD Data
Type
External dimensions (General tolerance: 0.3 .012)
Suggested mounting pad (Top view) (Tolerance: 0.1 .004)
1
2.54
.039
.100
14
9
.551
.354
0.25
.010
2.94
.116
4.9
5.6
.193
.220
SA type
9.56
.376
7.62
.300
11.5 0.5
.453 .020
2.54
.100
0.2
.008
0.5
.020
14
1
2.54
.039
.100
9
.551
.354
4.9
0.25
.010
2.94
.116
Max.7.5
.193
.295
SL type
9.56
.376
7.62
.300
11.5 0.5
.453 .020
0.5
2.54
.100
.020
14
1
2.54
.039
.100
9
.551
.354
4.9
0.25
.010
1.84
.072
Max.7.5
.193
.295
SS type
8.46
.333
7.62
.300
9.3 0.5
.366 .020
0.5
2.54
.100
.020
Schematic (Top view)
Single side stable
1-coil latching
2-coil latching
10
9
8
7
6
10
9
8
7
6
5
10
9
8
7
6
−
+
+
−
+
−
−
+
1
2
3
4
5
1
2
3
4
1
2
3
4
5
Direction indication
Direction indication
(Reset condition)
Direction indication
(Deenergized condition)
(Reset condition)
NOTES
1. Packing style
(ii) SL, SS type
2. Automatic insertion
mm inch
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
9.8 N {1 kgf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
1.75
.069
14.6
.575
Relay polarity bar
2.0
4.0
1.5+0.1 dia.
(Z type)
.079 .157
0
0.4
.059+.004 dia.
0
.016
Orientation (indicates PIN No.1) stripe
11.5
.453
0.2
7.8
.008
.307
16.0
.630
12.3
0.3
24.0
.945
.484
.012
TQ-SMD relays
(10.1
.398)*
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
Note) *SS type
Tape coming out direction
Stopper (gray)
Stopper (green)
(2) Dimensions of plastic reel
2) Tape and reel packing (surface-mount
terminal type)
C
B
mm inch
A
(1) Tape dimensions
(i) SA type
21 dia.
.827 dia.
2.0
.079
mm inch
Relay polarity bar
(Z type)
1.75
.069
2.0
4.0
Please chuck the
portion.
1.5+0.1 dia.
.079
.157
0
.059+.004 dia.
14.6
.575
0.4
0
80 1 dia.
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
.016
3.150 .039 dia.
11.5
.453
330 2 dia.
12.992 .079 dia.
0.2
6.3
12.3
.484
16.0
.630
0.3
.008
24.0
.945
.248
.012
TQ-SMD relays
13 dia.
Tape coming out direction
.512 dia.
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
ASCTB14E 201407-T
–11–
相关型号:
TQ2SL-L-9V-Z
Power/Signal Relay, DPDT, Latched, 0.008A (Coil), 9VDC (Coil), 70mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TQ2SL-L2-1.5V-Z
2-pole 5 mm Surface Mount Relay, JIS C0806 compliant Measurement equipment
PANASONIC
TQ2SL-L2-12V
Power/Signal Relay, DPDT, Latched, 0.012A (Coil), 12VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TQ2SL-L2-12V-X
Power/Signal Relay, DPDT, Latched, 0.012A (Coil), 12VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight,
PANASONIC
TQ2SL-L2-12V-Z
Power/Signal Relay, DPDT, Latched, 0.012A (Coil), 12VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明