SFS3-DC48V [PANASONIC]
Safety Relay, 4PST, Momentary, 0.008A (Coil), 48VDC (Coil), 360mW (Coil), 6A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;
| 型号： | SFS3-DC48V |
| 厂家： | 
PANASONIC |
| 描述： | Safety Relay, 4PST, Momentary, 0.008A (Coil), 48VDC (Coil), 360mW (Coil), 6A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT 继电器 |
| 文件： | 总9页 (文件大小：355K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SF RELAYS
Slim type safety relays
Slim type
FEATURES
TYPICAL APPLICATIONS
1. Acquisition of Korean safety
1. Machine tools
certification (“S” mark)
Excluding with diode type
2. Robots
3. Safety PLCs
2. Forcibly guided contact structure
3. Slim profile (mm inch)
40/50 (L) × 13 (W) × 24 (H)
1.575/1.969 (L) × .512 (W) × .945 (H)
4. Fast response time is achieved
(8 ms or less).
4. Circuits with stringent safety
standard requirements such as those
in motor vehicle production
equipment.
5. With diode and LED indication type
available
RoHS compliant
6. Sockets and terminal sockets
(spade and ring tongue terminal
compatible) are available.
Protective construction: Flux-resistant
type
ORDERING INFORMATION
SF S
S: Slim type
Contact arrangement
2: 2 Form A 2 Form B
3: 3 Form A 1 Form B
4: 4 Form A 2 Form B
5: 5 Form A 1 Form B
6: 3 Form A 3 Form B
Operation indication
Nil: Without LED indication
L: With LED indication
Nominal coil voltage
12, 24, 48V DC
Function
Nil: None
D: With diode
Notes: 1. Please consult us about other coil voltages.
2. LED indication color is green.
ASCTB119E 201507-T
–1–
SFS
TYPES
1. Standard type
Without LED indication
Part No.
With LED indication
Part No.
Contact arrangement
Nominal coil voltage
12 V DC
24 V DC
48 V DC
12 V DC
24 V DC
48 V DC
12 V DC
24 V DC
48 V DC
12 V DC
24 V DC
48 V DC
12 V DC
24 V DC
48 V DC
SFS2-DC12V
SFS2-DC24V
SFS2-DC48V
SFS3-DC12V
SFS3-DC24V
SFS3-DC48V
SFS4-DC12V
SFS4-DC24V
SFS4-DC48V
SFS5-DC12V
SFS5-DC24V
SFS5-DC48V
SFS6-DC12V
SFS6-DC24V
SFS6-DC48V
SFS2-L-DC12V
SFS2-L-DC24V
SFS2-L-DC48V
SFS3-L-DC12V
SFS3-L-DC24V
SFS3-L-DC48V
SFS4-L-DC12V
SFS4-L-DC24V
SFS4-L-DC48V
SFS5-L-DC12V
SFS5-L-DC24V
SFS5-L-DC48V
SFS6-L-DC12V
SFS6-L-DC24V
SFS6-L-DC48V
2 Form A 2 Form B
3 Form A 1 Form B
4 Form A 2 Form B
5 Form A 1 Form B
3 Form A 3 Form B
4 poles
6 poles
Standard packing: Carton: 50 pcs.; Case: 200 pcs.
* Sockets and terminal sockets available.
2. With diode and LED indication type
Contact arrangement
Nominal coil voltage
12 V DC
24 V DC
48 V DC
12 V DC
24 V DC
48 V DC
12 V DC
24 V DC
48 V DC
12 V DC
24 V DC
48 V DC
12 V DC
24 V DC
48 V DC
Part No.
SFS2-L-DC12V-D
SFS2-L-DC24V-D
SFS2-L-DC48V-D
SFS3-L-DC12V-D
SFS3-L-DC24V-D
SFS3-L-DC48V-D
SFS4-L-DC12V-D
SFS4-L-DC24V-D
SFS4-L-DC48V-D
SFS5-L-DC12V-D
SFS5-L-DC24V-D
SFS5-L-DC48V-D
SFS6-L-DC12V-D
SFS6-L-DC24V-D
SFS6-L-DC48V-D
2 Form A 2 Form B
4 poles
3 Form A 1 Form B
4 Form A 2 Form B
6 poles
5 Form A 1 Form B
3 Form A 3 Form B
Standard packing: Carton: 50 pcs.; Case: 200 pcs.
* Sockets and terminal sockets available.
RATING
1. Coil data
Nominal
Coil resistance
[ 10%]
(at 20°C 68°F)
Nominal
operating power
(at 20°C 68°F)
Max. applied
voltage
(at 20°C 68°F)
Nominal coil
Contact arrangement
Pick-up voltage Drop-out voltage operating current
voltage
(at 20°C 68°F)
(at 20°C 68°F)
[ 10%]
(at 20°C 68°F)
12V DC
30 mA
15 mA
7.5mA
400Ω
1,600Ω
6,400Ω
400Ω
1,600Ω
6,400Ω
288Ω
1,152Ω
4,608Ω
288Ω
1,152Ω
4,608Ω
288Ω
2 Form A 2 Form B
3 Form A 1 Form B
4 Form A 2 Form B
5 Form A 1 Form B
3 Form A 3 Form B
24V DC
48V DC
12V DC
24V DC
48V DC
12V DC
24V DC
48V DC
12V DC
24V DC
48V DC
12V DC
24V DC
48V DC
4 poles
Approx. 360mW
30 mA
15 mA
7.5mA
41.7mA
20.8mA
10.4mA
41.7mA
20.8mA
10.4mA
41.7mA
20.8mA
10.4mA
75%V or less of 10%V or more of
110%V of
nominal voltage
nominal voltage
(Initial)
nominal voltage
(Initial)
6 poles
Approx. 500mW
1,152Ω
4,608Ω
Note: The nominal operating current will increase by approximately 2mA due to the LED on the LED indication type.
ASCTB119E 201507-T
–2–
SFS
2. Specifications (relay)
Specifications
Characteristics
Item
4 poles
6 poles
Contact arrangement
2 Form A 2 Form B 3 Form A 1 Form B 4 Form A 2 Form B 5 Form A 1 Form B 3 Form A 3 Form B
Contact
Rating
Contact resistance (Initial)
Contact material
Max. 100 mΩ (By voltage drop 6 V DC 1A)
Au flashed AgSnO2 type
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
6A 250V AC, 6A 30V DC
1,500VA, 180W
250V AC, 125V DC
Max. switching current
Min. switching capacity (Reference value)*1
6 A (Reduce by 0.1 A/°C for temperatures 70 to 85°C 158 to 185°F)
1mA 5V DC
Nominal operating power
Approx. 360mW
Approx. 500mW
Insulation resistance (Initial)
Between open contacts
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,500 Vrms for 1 min. (Detection current: 10mA)
2,500 Vrms for 1 min. (Detection current: 10mA);
2,500 Vrms for 1 min.
7-8/11-12 between open contacts
9-10/13-14 between open contacts
11-12/13-14 between open contacts
(Detection current: 10mA);
7-8/9-10 between open contacts
Breakdown
voltage
(Initial)
Between contact sets
4,000 Vrms for 1 min.
4,000 Vrms for 1 min. (Detection current: 10mA);
3-4/5-6 between open contacts
3-4/7-8 between open contacts
5-6/9-10 between open contacts
7-8/9-10 between open contacts
Electrical
characteristics
(Detection current: 10mA);
3-4/5-6 between open contacts
3-4/7-8 between open contacts
5-6/9-10 between open contacts
Between contact and coil
4,000 Vrms for 1min (Detection current: 10mA)
Operate time (at 20°C 68°F)
Response time (at 20°C 68°F)*2
Release time (at 20°C 68°F)
Max. 20ms (Nominal coil voltage applied to the coil, excluding contact bounce time)
Max. 8ms (Nominal coil voltage applied to the coil, excluding contact bounce time and without diode)*4
Max. 20ms (Nominal coil voltage applied to the coil, excluding contact bounce time)
200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs)
1,000 m/s2 (Half-wave pulse of sine wave: 6 ms)
Functional
Shock
resistance
Destructive
Functional
Destructive
Mechanical
characteristics
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10μs)
10 to 55 Hz at double amplitude of 1.5 mm
Vibration
resistance
Mechanical
Min. 107 (at 180 times/min.)
250 V AC 6 A resistive load: Min. 105 (at 20 times/min.)
30 V DC 6 A resistive load: Min. 105 (at 20 times/min.)
Expected life
250 V AC 1 A resistive load: Min. 5×105 (at 30 times/min.)
30 V DC 1 A resistive load: Min. 5×105 (at 30 times/min.)
Electrical
[AC 15] 240 V AC 2 A inductive load: Min. 105 (at 20 times/min., cosϕ = 0.3)
[DC 13] 24 V DC 1 A inductive load: Min. 105 (at 20 times/min., L/R = 48 ms)
Conditions for operation, transport and
storage*3
Ambient temperature: –40°C to +85°C –40°F to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
Max. operating speed
20 times/min. (at max. rating)
Approx. 20 g .71 oz
Approx. 23 g .81 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Response time is the time after the coil voltage turns off until the time when “a” contact turns off.
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*4. Response time of built-in diode type is 12 ms or less (excluding contact bounce time when nominal coil voltage is applied to the coil).
ASCTB119E 201507-T
–3–
SFS
REFERENCE DATA
1. Operate/response/release time
2. Coil temperature rise
3. Malfunctional shock
Tested sample: SFS4-DC24V (4 Form A 2 Form B),
20pcs. (a contacts: 80, b contacts: 40)
Tested sample: SFS4-DC24V (4 Form A 2 Form B),
3pcs.
Measured portion: Inside the coil
Ambient temperature: Room temperature
(27°C 80.6°F), 70°C 158°F, 85°C 185°F
Tested sample: SFS4-DC24V (4 Form A 2 Form B),
3pcs.
50
50
40
30
Deenergized condition
Energized condition
Operate time
X
Z
X'
Release time
Response time
Y
Z'
Y
200m/s2
40
Y'
X
Z
200m/s2
200m/s2
30
20
10
0
20
0A Room temperature
6A Room temperature
200m/s2
Z'
200m/s2
X'
0A 70°C 158°F
10
6A 70°C 158°F
200m/s2
Y'
0A 85°C 185°F
4.5A 85°C 185°F
0
90
100
110
120
130
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
Time, ms
Coil applied voltage, %V
4. Max, switching capacity
10
8
7
6
5
AC resistive load
4
3
2
DC resistive load
1
0.7
0.5
0.3
0.2
0.1
10
20 30 50 70 100 200300 500 1000
125 250
Contact voltage, V
Other contact gaps when contacts are welded
Sample: SFS4-DC24V (4 Form A 2 Form B)
The table below shows the state of the other contacts.
In case of form “NO” contact weld the coil applied voltage is 0 V.
In case of form “NC” contact weld the coil applied voltage is nominal.
State of other contacts
3-4 (NC)
5-6 (NC)
7-8 (NO)
9-10 (NO)
>0.5
11-12 (NO)
>0.5
13-14 (NO)
>0.5
3-4 (NC)
5-6 (NC)
>0.5
>0.5
>0.5
>0.5
>0.5
7-8 (NO)
>0.5
>0.5
>0.5
>0.5
>0.5
>0.5
>0.5
>0.5
Welded contact No.
9-10 (NO)
11-12 (NO)
13-14 (NO)
>0.5: contact gap is kept at min. 0.5 mm .020inch
Empty cells: either ON or OFF
Note: Contact gaps are shown at the initial state.
If the contact transfer is caused by load switching, it is necessary to check the actual loading.
ASCTB119E 201507-T
–4–
SFS
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
1. 4 poles (2 Form A 2 Form B, 3 Form A 1 Form B)
External dimensions
PC board pattern (Bottom view)
CAD Data
Max. 40
Max. 1.575
10.16
.400
10-1.4 .055 dia.
Max. 13
Max. .512
13.97
.550
(1.83)
(.072)
5.08
.200
11.43 .450
5.08 .200
Max. 24
Max. .945
3.5
.138
Tolerance: 0.1 .004
1.83
.072
0.5
.020
13.97
.550
1.0
.039
5.08
.200
11.43 .450
5.08 .200
10.16
.400
General tolerance: 0.3 .012
Schematic (Bottom view)
1
3
5
4
6
7
9
8
1
2
3
5
4
7
9
8
1
2
3
5
4
6
7
9
8
1
2
3
5
4
6
7
9
8
With diode and
LED indication type
Standard
2
10
6
10
10
10
(2 Form A 2 Form B)
(3 Form A 1 Form B)
(2 Form A 2 Form B)
(3 Form A 1 Form B)
1
3
4
7
8
1
3
4
7
8
With LED indication
2
5
6
9
10
2
5
6
9
10
(2 Form A 2 Form B)
(3 Form A 1 Form B)
2. 6 poles (4 Form A 2 Form B, 5 Form A 1 Form B, 3 Form A 3 Form B)
External dimensions
PC board pattern (Bottom view)
CAD Data
Max. 50
Max. 1.969
10.16
.138
14-1.4 .055 dia.
Max. 13
Max. .512
13.97
.550
(1.83)
(.072)
5.08
.200
5.08 .200
11.43 .450
5.08 .200
5.08 .200
Max. 24
Max. .945
3.5
.138
Tolerance: 0.1 .004
1.83
.072
0.5
.020
1.0
13.97
.039
.550
5.08
.200
5.08 .200
10.16
.400
5.08 .200
11.43 .450
5.08 .200
General tolerance: 0.3 .012
Schematic (Bottom view)
1
3
5
4
6
7
9
8
11 12
1
3
5
4
6
7
9
8
11 12
1
3
4
7
8 11 12
Standard
2
10 13 14
2
1
10 13 14
2
1
5
6
9
10 13 14
(4 Form A 2 Form B)
(5 Form A 1 Form B)
(3 Form A 3 Form B)
1
3
4
7
8
11 12
3
4
7
8
11 12
3
4
7
8 11 12
With LED indication
2
5
6
9
10 13 14
2
1
5
6
9
10 13 14
2
1
5
6
9
10 13 14
(4 Form A 2 Form B)
(5 Form A 1 Form B)
(3 Form A 3 Form B)
1
With diode and
LED indication type
2
3
4
7
8
11 12
3
4
7
8
11 12
3
4
7
8 11 12
5
6
9
10 13 14
2
5
6
9
10 13 14
2
5
6
9
10 13 14
(4 Form A 2 Form B)
(5 Form A 1 Form B)
(3 Form A 3 Form B)
SAFETY STANDARDS
Certification authority
File No.
E43149*
B 15 05 13461 346 6A 250V AC (cosφ=1.0), 6A 30V DC (0ms), AC15: 2A 240V AC (cosφ=0.3), DC13: 1A 24V DC (L/R 48ms)
UL/C-UL
TÜV
6A 277V AC, 6A 30V DC
* CSA standard: Certified by C-UL
ASCTB119E 201507-T
–5–
SFS
NOTES
1. For cautions for use, please read “GENERAL
APPLICATION GUIDELINES”.
7. Usage, transport and storage conditions
1) Ambient temperature, humidity, and atmospheric pressure
during usage, transport, and storage of the relay:
(1) Temperature: –40 to +85°C –40 to +185°F
(When the temperature is 70 to 85°C 158 to 185°F, reduce the 6
A max. switching current by 0.1 A/°C.)
(2) Humidity: 5 to 85% RH (Avoid freezing and condensation.)
The humidity range varies with the temperature. Use within the
range indicated in the graph below.
2. Coil operating power
Pure DC current should be applied to the coil. If it includes
ripple, the ripple factor should be less than 5%. However, check
it with the actual circuit since the characteristics may be slightly
different.
The wave form should be rectangular.
3. Coil connection
When connecting coils, refer to the wiring diagram to prevent
(3) Atmospheric pressure: 86 to 106 kPa
mis-operation or malfunction.
4. Cleaning
Temperature and humidity range for usage, transport, and
storage
This relay is not sealed, therefore, immersion may cause failure.
Be careful that flux does not overflow onto the PC board or
penetrate inside the relay.
Humidity, %RH
85
5. Soldering
Tolerance range
When using automatic soldering, the following conditions are
recommended
1) Preheating: 120°C 248°F, within 120 Sec (PC board solder
surface)
2) Soldering: 260°C 5°C 500°F 41°F, within 6 Sec
6. Other
1) If the relay has been dropped, the appearance and
characteristics should always be checked before use.
2) The switching lifetime is defined under the standard test
condition specified in the JIS* C 5442-1996 standard
(temperature 15 to 35°C 59 to 95°F, humidity 25 to 75%). Check
this with the actual product as it is affected by the coil driving
circuit, load type, activation frequency, activation phase, ambient
conditions and other factors.
(Avoid freezing (Avoid
when used at condensation
temperatures
lower than
0°C 32°F)
when used at
temperatures
higher than
0°C 32°F)
5
–40
–40
0
+32
85
+185
Temperature, °C °F
2) Condensation
Condensation forms when there is a sudden change in
temperature under high temperature and high humidity
conditions. Condensation will cause deterioration of the relay
insulation.
3) Freezing
Also, be especially careful with loads such as those listed below.
(1) When used for AC load-operation and the operating phase is
synchronous. Rocking and fusing can easily occur due to
contact shifting.
Condensation or other moisture may freeze on the relay when
the temperatures is lower than 0°C 32°F. This causes problems
such as sticking of movable parts or operational time lags.
4) Low temperature and low humidity
(2) During high frequency on/off operation with certain loads,
arcing may occur at the contacts. This can cause fusion to
Oxygen and Nitrogen gas in the air creating Nitric Acid (HNO3)
which can cause corrosion to the contacts.
Please see the following countermeasure examples:
1. Incorporate an arc-extinguishing circuit.
2. Lower the operating frequency
At low temperature, low humidity environments, the plastic
becomes brittle.
Please note corrections.
8. Please connect DC coil types with LED and built-in diode
correctly by verifying the coil polarity (“+” and “–”).
Connecting with reverse polarity will cause the LED not to
light and damage the built-in diode due to its specification.
3. Lower the ambient humidity
3) For secure operations, nominal coil voltage should be applied.
In addition, please note that pick-up and drop-out voltage will
vary according to the ambient temperature and operating
conditions.
4) Heat, smoke, and/or fire may occur if the relay is used outside
the allowable ranges for the coil ratings, contact ratings,
operating cycle lifetime, and other specifications. Therefore, do
not use the relay if these ratings are exceeded. Also, make sure
that the relay is wired correctly.
5) Incorrect wiring may cause false operation or generate heat or
flames.
6) Check the ambient conditions when storing or transporting
the relays and devices containing the relays. Freezing or
condensation may occur in the relay causing damage. Avoid
exposing the relays to heavy loads, or strong shock and
vibration.
ASCTB119E 201507-T
–6–
SF RELAYS
Slim type
ACCESSORIES
(Sockets and DIN rail terminal sockets)
TYPES
1. Sockets
Type
No. of poles
4 poles
Part No.
SFS4-PS
SFS6-PS
PC board sockets
6 poles
Standard packing: Carton: 10 pcs.; Case: 100 pcs.
2. DIN rail terminal socket
Type
No. of poles
4 poles
Part No.
w
Ne
SFS4-SFD-R
SFS6-SFD-R
Terminal sockets
for spade and ring tongue terminals
6 poles
Standard packing: Carton: 10 pcs.; Case: 100 pcs.
Note: For previous products (spade tongue terminal dedicated terminal sockets), please order SFS4-SFD for 4 poles and SFS6-SFD for 6 poles.
RATING
Specifications
Item
Breakdown voltage (Initial)
Insulation resistance (Initial)
Max. carrying current
Specifications
Between each terminal: 2,500 Vrms for 1 min. (Detection current: 10mA)
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
6 A (Reduce by 0.1 A/°C for temperatures 70 to 85°C 158 to 185°F)
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
1. PC board sockets (4 poles)
(SFS4-PS)
External dimensions
PC board pattern (Bottom view)
50.0
1.969
CAD Data
39.9
3-3.2 .126 dia.
1.571
(For M3 screw)
10.16
.400
4.1
.161
24.8
.976
Please use the screw
with a stem length of
8 mm .315 inch.
15.0
.591
10-1.1 .043 dia.
(6.93)
(.273)
13.97
.550
5.08
.200
11.43 .450
40.0
1.575
5.08 .200
Tolerance: 0.1 .004
(13)
(.512)
(13)
(.512)
0.4
0.8
6.93
.273
.016
.031
13.97
.550
10.16
.400
5.08
.200
11.43 .450
5.08 .200
General tolerance: 0.3 .012
Schematic (Bottom view)
1
2
3
4
7
9
8
1
3
5
4
6
7
8
Standard
5
6
10
2
9
10
(When 2 Form A 2 Form B mounted)
(When 3 Form A 1 Form B mounted)
1
3
4
7
8
1
3
4
7
8
With LED indication
2
5
6
9
10
2
5
6
9
10
(When 2 Form A 2 Form B mounted)
(When 3 Form A 1 Form B mounted)
1
3
4
7
8
1
3
4
7
8
With diode and
LED indication type
2
5
6
9
10
2
5
6
9
10
(When 2 Form A 2 Form B mounted)
(When 3 Form A 1 Form B mounted)
ASCTB111E 201407-T
–1–
SFS ACCESSORIES
2. PC board sockets (6 poles)
(SFS6-PS)
External dimensions
PC board pattern (Bottom view)
60.0
2.362
CAD Data
49.9
1.965
3-3.2 .126 dia.
(For M3 screw)
Please use the screw
with a stem length of
8 mm .315 inch.
10.16
.400
4.1
.161
24.8
.976
15.0
.591
14-1.1 .043 dia.
(6.93)
(.273)
13.97
.550
5.08
.200
5.08 .200
5.08 .200
5.08 .200
11.43 .450
40.0
1.575
Tolerance: 0.1 .004
(13)
(.512)
(13)
(.512)
0.4
0.8
6.93
.273
.016
.031
13.97
.550
5.08
.200
10.16
.400
5.08 .200
11.43 .450
5.08 .200
5.08 .200
General tolerance: 0.3 .012
Schematic (Bottom view)
1
3
5
4
7
9
8
11 12
1
3
4
6
7
9
8
11 12
1
3
4
7
8 11 12
Standard
2
6
10 13 14
2
5
10 13 14
2
5
6
9
10 13 14
(When 4 Form A 2 Form B mounted)
(When 5 Form A 1 Form B mounted)
(When 3 Form A 3 Form B mounted)
1
3
4
7
8
11 12
1
3
4
7
8
11 12
1
3
4
7
8 11 12
With LED indication
2
5
6
9
10 13 14
2
5
6
9
10 13 14
2
5
6
9
10 13 14
(When 4 Form A 2 Form B mounted)
(When 5 Form A 1 Form B mounted)
(When 3 Form A 3 Form B mounted)
1
3
4
7
8
11 12
1
3
4
7
8
11 12
1
3
4
7
8 11 12
With diode and
LED indication type
2
5
6
9
10 13 14
2
5
6
9
10 13 14
2
5
6
9
10 13 14
(When 4 Form A 2 Form B mounted)
(When 5 Form A 1 Form B mounted)
(When 3 Form A 3 Form B mounted)
3.Terminal socket for spade and ring tongue terminals (For 4 poles finger protect type)
CAD Data
External dimensions
Mounting hole dimensions
6.5
.256
2-M3.5 or 4 dia. hole
2-M.138 or .157 dia. hole
R2.0 .079
14.5 0.2
.571 .008
M3 .118 screw
6.2 0.3 dia.
.244 .012 dia.
75.0
2.953
80.0 0.2
3.150 .008
2-4×5 hole
6.5
.256
6.3+0.3
.248+.012
0
0
Tolerance: 0.1 .004
Schematic (Top view)
58.9
2.319
*62.4
*2.457
10
7
8
9
6
4.0
.157
35.4
1.394
22.4
.882
5
4
3
General tolerance: 0.5 .020
* Reference value (when using DIN rail ATA48011)
2
1
Note: Ring tongue terminals cannot be used with conventional DIN rail terminal socket (SFS4-SFD).
In use of a ring tongue terminals, please use SFS4-SFD-R.
ASCTB111E 201407-T
–2–
SFS ACCESSORIES
4.Terminal socket for spade and ring tongue terminals (For 6 poles finger protect type)
CAD Data
External dimensions
Mounting hole dimensions
6.5
2-M3.5 or 4 dia. hole
2-M.138 or .157 dia. hole
.256
22.0 0.2
.866 .008
R2.0 .079
M3 .118 screw
6.2 0.3 dia.
.244 .012 dia.
75.0
2.953
80.0 0.2
3.150 .008
2-4×5 hole
6.5
.256
Tolerance: 0.1 .004
6.3+0.3
.248+.012
0
0
Schematic (Top view)
14
12
58.9
2.319
*62.4
*2.457
13
11
10
8
9
6
5
7
4
4.0
.157
35.4
1.394
29.8
1.173
2
1
3
General tolerance: 0.5 .020
* Reference value (when using DIN rail ATA48011)
Note: Ring tongue terminals cannot be used with conventional DIN rail terminal socket (SFS6-SFD).
In use of a ring tongue terminals, please use SFS6-SFD-R.
NOTES
Installation
1) Attach directly to the chassis or use a DIN rail.
(1) When attaching directly to chassis
• Use a M3.5 screw, spring washer, and hex nut.
• For the mounting pitch, refer to the dimensions.
(2) When installing on a DIN rail
• Use a 35 mm 1.378 inch wide DIN rail (DIN46277).
• Install and remove as shown in the figures below.
Pull
<When installing>
<When removing>
Push
Screwdriver
DIN rail
2) Refer to the figure below for applicable wire-pressed terminals.
Spade tongue terminal
Ring tongue terminal
6.3 mm max.
3 mm min.
6.3 mm max.
3 mm min.
.248 inch max. .118 inch min.
.248 inch max. .118 inch min.
ASCTB111E 201407-T
–3–
相关型号：
SFS3-L-DC12V
Safety Relay, 4PST, Momentary, 0.03A (Coil), 12VDC (Coil), 360mW (Coil), 6A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
SFS3-L-DC24V
Safety Relay, 4PST, Momentary, 0.015A (Coil), 24VDC (Coil), 360mW (Coil), 6A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
SFS3-L-DC48V
Safety Relay, 4PST, Momentary, 0.008A (Coil), 48VDC (Coil), 360mW (Coil), 6A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
SFS30243R3C
DC-DC Regulated Power Supply Module, 1 Output, 29.7W, Hybrid, ROHS COMPLIANT, DIP-17/14
COSEL
©2020 ICPDF网 联系我们和版权申明