MS-AJR [PANASONIC]
Universal Sensor Mounting Stand;型号: | MS-AJR |
厂家: | PANASONIC |
描述: | Universal Sensor Mounting Stand |
文件: | 总6页 (文件大小:846K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Universal Sensor Mounting Stand
953
MS-AJ SERIES
■General terms and conditions............. F-3
Related Information
■LS-400.......................................... P.213~
■EX-40 / EZ-10.................P.313~ / P.891~
FIBER
SENSORS
■CX-400 / CX-440 ............P.245~ / P.319~
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
panasonic.net/id/pidsx/global
STATIC
CONTROL
DEVICES
LASER
MARKERS
Eight types of mounting stand enable installation of sensors,
fibers, and reflectors at any desired position
PLC
HUMAN MACHINE
INTERFACES
Easy adjustment of sensing position
Mountable on vertical or horizontal plane
ENERGY
MANAGEMENT
SOLUTIONS
Even after mounting a sensor, you can adjust the sensor
easily.
Mounting on horizontal plane
Mounting on vertical plane
MS-AJ1(-□)
MS-AJ2(-□)
FA COMPONENTS
Conveyor line
Flexible height adjustment Flexible angle adjustment
Conveyor line
MACHINE VISION
SYSTEMS
Swivel: 360° revolution
Mountable on
Securely fixed
UV CURING
SYSTEMS
aluminum frame
with two M6 screws
Elevation angle ±±4°
(Note)
Cable can be neatly threaded into pipe
150 mm 5.906 in
approx.
Cable guide (Note)
Sensor Mounting
Stand
Sensor
Checker
Sensor
Note: Do not thread the fiber
cable into the pipe in
case of MS-AJ□-F
Note: The elevation angle is ±20° for
Controller
MS-AJ□-F (assembly for fiber).
Other Products
Pipe
(assembly for fiber).
Eight models
MS-AJ
MS-AJ
□
(Basic assembly)
MS-AJ□-A (Lateral arm assembly)
MS-AJ□-M (Assembly for reflector)
MS-AJ□-F (Assembly for fiber)
It is used to mount
A lateral arm is added to the
MS-AJ□ basic assembly.
Sensing is possible from
above an assembly line.
The MS-AJ□ basic assembly
is modified to mount a
reflector. It can be used for
RF-220 and RF-230 reflector.
The sensor mounting bracket
of MS-AJ□-A is replaced with
a fiber mounting bracket. It can
be used with FD-L51, FD-L52,
FD-L53, FD-L54 and M3, M4
or M6 threaded head fiber.
CX-400/440, LS-400, EX-40
and EZ-10 series sensors,
and the RF-210 reflector.
MS-AJ1 MS-AJ2
MS-AJ1-A MS-AJ2-A
MS-AJ1-M
MS-AJ2-M
MS-AJ1-F
MS-AJ2-F
Universal Sensor Mounting Stand MS-AJ SERIES
954
STRUCTURE
FIBER
SENSORS
MS-AJ1, MS-AJ2, MS-AJ1-M, MS-AJ2-M
MS-AJ1-A, MS-AJ2-A, MS-AJ1-F, MS-AJ2-F
LASER
SENSORS
MS-AJ1-M / MS-AJ2-M (assembly
MS-AJ1-F / MS-AJ2-F(assembly for fiber) include parts
enclosed by the dotted line in place of sensor mounting
bracket.
PHOTO-
for reflector) include parts enclosed
by the dotted line in place of
sensor mounting bracket.
ELECTRIC
SENSORS
MICRO
(e.g.) FD-L51
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
(e.g.) RF-230
SENSORS
(e.g.) CX-400 series
(e.g.) CX-400 series
INDUCTIVE
PROXIMITY
SENSORS
(MS-AJ1B)
The MS-AJ2□ has a different
base.
PARTICULAR
USE
(MS-AJ1B)
SENSORS
SENSOR
OPTIONS
The MS-AJ2□ has a different
(MS-AJ2B)
(MS-AJ2B)
base.
SIMPLE
WIRE-SAVING
UNITS
7
Note: Adjust the arm joint ( in the figure) by loosening the M4 (length
6
Note: The cable guide ( in the figure) is not included in the assembly for
reflector (MS-AJ□-M).
8
12 mm 0.472 in) hexagon-socket-head bolts ( in the figure) in
two places. This way you can adjust the arm joint more smoothly.
WIRE-SAVING
SYSTEMS
Type
Assembly sets
Components
MEASURE-
MENT
MS-AJ1 MS-AJ1-A MS-AJ1-M MS-AJ1-F MS-AJS MS-AJR MS-AJ-R1 MS-AJD MS-FD-1
MS-AJ2 MS-AJ2-A MS-AJ2-M MS-AJ2-F
SENSORS
MS-AJL
Arm joint
unit
MS-AJP
Arm
(Pipe)
MS-AJ1B
MS-AJ2B
(Base unit)
Sensor
Reflector Reflector Fiber
Fiber
MS-AJG
Model No.
Basic
Lateral arm
assembly assembly
Assembly
for reflector for fiber
Assembly
mounting mounting mounting mounting mounting
(Cable guide)
STATIC
CONTROL
DEVICES
unit
unit
bracket
unit
bracket
No. Designation
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
2
3
4
5
6
7
Base for horizontal mounting (Accessory for MS-AJ1□)
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
2
1
Base for vertical mounting (Accessory for MS-AJ2□)
1
–
LASER
MARKERS
Arm (Pipe)
1
–
–
–
–
–
Attachment
1
–
1
–
1
1
–
1
–
PLC
–
–
–
Sensor mounting bracket
Cable guide
1
–
–
–
–
–
–
–
1
–
2
1
1
–
HUMAN
–
1
–
Arm joint
1
2
MACHINE
INTERFACES
M4 (length 12 mm 0.472 in) hexagon-
–
–
–
–
–
–
–
–
–
–
–
–
–
8
9
1
1
1
3
1
1
1
1
1
3
1
1
1
–
1
–
socket-head bolt (Drilube applied product)
M4 (length 15 mm 0.591in) hexagon-socket-
ENERGY
MANAGEMENT
SOLUTIONS
–
–
1
–
head bolt (Drilube applied product)
M4 (length 22 mm 0.866 in)
hexagon-socket-head bolt
10
1
1
1
FA
COMPONENTS
–
–
–
–
–
–
–
–
–
–
–
–
11
12
13
M4 nut
3
1
1
5
1
1
3
1
1
5
1
1
2
1
1
2
1
1
2
1
1
2
–
1
–
M4 spring washer
M4 plain washer
MACHINE
VISION
–
–
SYSTEMS
M3 (length 14 mm 0.551 in) screw with washers
for CX-400/440, LS-400 and EZ-10 series
–
–
–
–
–
–
–
–
–
–
–
–
–
–
14
15
2
2
2
2
2
2
UV
CURING
SYSTEMS
M3 (length 18 mm 0.709 in) screw with
washers for EQ-20 series (Note 2)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
16
17
18
19
20
21
22
Auxiliary mounting plate for EQ-20 series (Note 2)
M3 (length 16 mm 0.630 in) screw with washers for EX-40 series
Auxiliary mounting plate for EX-40 series
Reflector mounting bracket
1
2
1
2
1
2
1
–
1
–
1
–
1
2
1
2
1
2
–
–
–
–
–
–
–
–
–
Sensor
Mounting
Stand
M3 (length 8 mm 0.315 in) screw with washers for RF-220
M4 (length 8 mm 0.315 in) screw with washers for RF-230
Fiber mounting bracket
2
–
2
–
2
–
Sensor
Checker
1
1
1
Sensor
Notes: 1) The numbers shown in the table above indicate the quantities of the respective parts. 2) The EQ-20 series were discontinued in December 2005.
Controller
Other
Products
ORDER GUIDE
Individual components are also available as follows
Applicable sensor,
MS-AJ
Type
Appearance
Model No.
MS-AJ1
Designation
Appearance
Model No.
reflector and fiber
Sensor mounting
unit
Horizontal
mounting type
MS-AJS
MS-AJR
MS-AJ-R1
MS-AJD
MS-FD-1
MS-AJL
MS-AJ1B
MS-AJ2B
MS-AJG
MS-AJP
Basic
assembly
CX-400/440 series
LS series
Reflector mounting
Vertical
mounting type
unit
MS-AJ2
MS-AJ1
MS-AJ2
EQ-20 series (Note)
EX-40 series
EZ-10 series
Reflector mounting
bracket
Horizontal
mounting type
MS-AJ1-A
MS-AJ2-A
MS-AJ1-M
MS-AJ2-M
Fiber mounting
unit
Lateral arm
assembly
RF-210 (Reflector)
Vertical
mounting type
Fiber mounting
bracket
MS-AJ1-A MS-AJ2-A
MS-AJ1-M MS-AJ2-M
Horizontal
mounting type
Arm joint unit
Assembly
for reflector
RF-220 (Reflector)
RF-230 (Reflector)
Base unit
(Horizontal mounting type)
Vertical
mounting type
Base unit
FD-L51 (Fiber)
FD-L52 (Fiber)
FD-L53 (Fiber)
FD-L54 (Fiber)
Horizontal
mounting type
(Vertical mounting type)
MS-AJ1-F
MS-AJ2-F
Assembly
for fiber
Cable guide
Vertical
mounting type
M3, M4 and M6 threaded
Arm (Pipe)
MS-AJ1-F MS-AJ2-F
head fibers
Note: The EQ-20 series were discontinued in December 2005.
Universal Sensor Mounting Stand MS-AJ SERIES
955
FIBER
PRECAUTIONS FOR PROPER USE
SENSORS
LASER
SENSORS
Mounting
Threading cable into pipe
PHOTO-
ELECTRIC
SENSORS
• To mount the universal sensor mounting stand on your
equipment, use M6 screws. The tightening torque should
be 2.0 Nm or less.
• When the sensor is mounted on MS-AJ□ (basic
assembly) or on MS-AJ□-A (lateral arm assembly), the
sensor cable can be threaded through the pipe. However,
do not thread the fiber cable through the pipe when a
fiber head is mounted on MS-AJ□-F (assembly for fiber).
MICRO
PHOTO-
ELECTRIC
SENSORS
Mounting on horizontal plane Mounting on vertical plane
AREA
SENSORS
<Correct>
<Incorrect>
SAFETY LIGHT
Conveyor
line
M6 screws
CURTAINS
/
SAFETY
Conveyor
line
COMPONENTS
PRESSURE /
FLOW
SENSORS
M6 screws
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
Adjustment
SENSORS
M4 hexagon-socket-
head bolts
• Arm, attachment, base
and arm joint can be
SENSOR
OPTIONS
adjusted as shown by the
arrows in the right figure by
loosening the M4 hexagon-
socket-head bolts.
• After the adjustment, the
tightening torque of the M4
SIMPLE
WIRE-SAVING
UNITS
Others
M4 hexagon-socket-
head bolts
WIRE-SAVING
SYSTEMS
• Do not apply excessive force on any part of the universal
sensor mounting stand.
• When using this stand, take care that excessive vibration
is not applied to the sensor.
MEASURE-
MENT
SENSORS
hexagon-socket-head bolts should be 1.2 Nm or less.
STATIC
CONTROL
DEVICES
LASER
MARKERS
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
PLC
Basic assembly
Basic assembly
MS-AJ1
MS-AJ2
HUMAN
MACHINE
INTERFACES
17.8
0.701
17.8 0.701
28
20
28
20
11.8
0.465
12
11.8
0.465
12
2-ø3.4 ø0.134
2-ø3.4 ø0.134
ENERGY
MANAGEMENT
SOLUTIONS
1.102 0.787
1.102 0.787
0.472
t 2
t 0.079
0.472 mounting holes
mounting holes
4
0.157
4
0.157
t 2
t 0.079
20 0.787
6 0.236
20 0.787
6 0.236
2-3.2 0.126 × 4.2 0.165
elongated holes
2-3.2 0.126 × 4.2 0.165
elongated holes
FA
1 0.039
1 0.039
COMPONENTS
Cable guide
(POM)
Cable guide
(POM)
45°
45°
45°
20
20
0.787
33
1.299
3.2
0.126
25
0.984
33
1.299
3.2
0.126
25
0.984
MACHINE
VISION
0.787
45°
SYSTEMS
20
1
20
1
4.2 0.165
4.2 0.165
M4 hexagon-
socket-head
bolt
Attachment
(Nylon 6)
Attachment
(Nylon 6)
UV
CURING
0.787 0.039
0.787 0.039
M4 hexagon-
socket-head
bolt
SYSTEMS
Sensor mounting bracket
[Stainless steel (SUS304)]
Sensor mounting bracket
[Stainless steel (SUS304)]
(147)
(5.787) (Note)
(147)
(5.787) (Note)
ø10 ø0.394 pipe
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
(210)
(8.268)
(218)
(8.583)
[Stainless steel (SUS304)]
Sensor
Mounting
Stand
2-ø6.6 ø0.260
mounting holes
Sensor
Checker
10
0.394
8
(36.5)
Sensor
(44.5)
(1.752)
20
(1.437)
0.315
Controller
28
0.787
18
1.102
Other
Products
0.709
Base
(PA)
32
24.5
0.965
20
1.260
46
04.7587
Base
(PA)
1.811
Two M3 (length 14 mm 0.551 in) screws with
washers, two M3 (length 16 mm 0.630 in) screws
with washers, two M3 (length 18 mm 0.709 in)
screws with washers, one auxiliary mounting plate
for EQ-20 series and one auxiliary mounting plate
for EX-40 series are attached.
1.772
MS-AJ
Two M3 (length 14 mm 0.551 in) screws with
washers, two M3 (length 16 mm 0.630 in) screws
with washers, two M3 (length 18 mm 0.709 in)
screws with washers, one auxiliary mounting plate
for EQ-20 series and one auxiliary mounting plate
for EX-40 series are attached.
20
0.787
25.5
1.004
31
1.220
32
1.260
10
0.394
2-ø6.6 ø0.260 mounting holes
15
0.591
8
0.315
Note: The dimensions in the brackets indicate the adjustable range of the
movable part.
Note: The dimensions in the brackets indicate the adjustable range of the
movable part.
Universal Sensor Mounting Stand MS-AJ SERIES
956
DIMENSIONS (Unit: mm in)
FIBER
The CAD data can be downloaded from our website.
Basic assembly
SENSORS
LASER
SENSORS
MS-AJ1 MS-AJ2
PHOTO-
Assembly dimensions with CX-400/440 series,
LS-400 series, EZ-10 series
(Mounting part only)
Assembly dimensions with RF-210 (Reflector)
(Mounting part only)
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
24.8
0.976
11.8
0.465
20
18.4
23.2 0.913
(EZ-10 : 24 0.945)
0.724
AREA
20
0.787
t 2
t 0.079
31.8
1.252
17.6 0.693
SENSORS
0.787
11.8
6
(EZ-10 : 18 0.709)
0.465
0.236
28
20
SAFETY LIGHT
CURTAINS /
SAFETY
20
0.787
0.236
1.102 0.787
27
t 2 t 0.079
45°
45°
6
25
0.984
33.3
1.311
33
1.299
COMPONENTS
1.063
PRESSURE /
FLOW
45°
45°
25.4 1.000
(EZ-10 : 25 0.984)
4.2
0.165
SENSORS
2-M3 (length
14 mm 0.551 in)
INDUCTIVE
PROXIMITY
SENSORS
2-M3 (length 14 mm 0.551 in)
screws with washers
screws with washers
4.2
0.165
33
1.299
Center of sensing
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
Assembly dimensions with EX-40 series
(Mounting part only)
SIMPLE
24.4
WIRE-SAVING
UNITS
0.961
17
11.8
0.465
20
0.669
28
1.102
27
1.063
WIRE-SAVING
SYSTEMS
20
t 2
t 0.079
Center of
sensing
0.787
0.787
6
0.236
MEASURE-
MENT
45°
45°
15.5
SENSORS
33
1.299
0.610
19
STATIC
0.748
CONTROL
DEVICES
3
2-M3 (length 16 mm 0.630 in)
screws with washers
0.118
4.2
0.165
Auxiliary mounting
plate for EX-40 series
LASER
MARKERS
PLC
Assembly for reflector
Assembly for reflector
MS-AJ1-M
MS-AJ2-M
HUMAN
MACHINE
INTERFACES
22
0.866
17
22
0.866
17
M4 hexagon-
socket-head bolt
11.8
0.465
M4 hexagon-
socket-head bolt
11.8
0.465
2-M4
2-M3
ENERGY
2-M4
2-M3
MANAGEMENT
SOLUTIONS
t 2 t 0.079
0.669
0.669
t 2 t 0.079
45°
45°
45°
45°
25
40
50
FA
40 1.575 50 1.969
COMPONENTS
25 0.984
0.984 1.575 1.969
MACHINE
VISION
4.2
0.165
4.2
0.165
SYSTEMS
Attachment
(Nylon 6)
Attachment
(Nylon 6)
20
0.787
28
1.102
20
0.787
28
1.102
UV
(143.5)
(5.650) (Note)
CURING
SYSTEMS
(147)
(5.787) (Note)
(208)
(8.189)
(200)
(7.874)
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
2-ø6.6 ø0.260
mounting holes
Sensor
Mounting
Stand
Base
(PA)
10 0.394
(40)
(44.5)
(1.575)
20
28
Sensor
Checker
(1.752)
18
0.787
1.102
0.709
Base
(PA)
32
24.5
0.965
Sensor
20
0.787
45
1.260
46
Controller
8
0.315
Other
Products
1.811
20
0.787
1.772
Two M3 (length 8 mm 0.315 in)
screws with washers and two M4
(length 8 mm 0.315 in) screws
with washers are attached.
Two M3 (length 8 mm 0.315 in)
screws with washers and two
M4 (length 8 mm 0.315 in)
screws with washers are
attached.
25.5
1.004
31
MS-AJ
1.220
32
1.260
10
0.394
15
0.591
8
2-ø6.6 ø0.260 mounting holes
0.315
Note: The dimensions in the brackets indicate the adjustable range of the
movable part.
Note: The dimensions in the brackets indicate the adjustable range of the
movable part.
Universal Sensor Mounting Stand MS-AJ SERIES
957
FIBER
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
SENSORS
LASER
SENSORS
Assembly for reflector
MS-AJ1-M MS-AJ2-M
PHOTO-
ELECTRIC
SENSORS
Assembly dimensions with RF-220 (Reflector)
(Mounting part only)
Assembly dimensions with RF-230 (Reflector)
(Mounting part only)
MICRO
PHOTO-
71.3
55.3
ELECTRIC
SENSORS
2.807
2.177
38
11.8
0.465
11.8
0.465
20
M4 hexagon-socket-
head bolt
M4 hexagon-socket-
head bolt
47
1.850
1.496
AREA
12
20
0.787
SENSORS
t 2 t 0.079
0.787
t 2 t 0.079
0.472
SAFETY LIGHT
CURTAINS
/
45°
45°
45°
SAFETY
50.3
1.980
35.3
1.390
50
1.969
COMPONENTS
PRESSURE /
FLOW
45°
4.2
4.2
SENSORS
28
28
37
28
2-M3 (length 8 mm 0.315 in)
screws with washers
0.165
0.165
1.102
1.102
1.457
1.102
2-M4 (length 8 mm 0.315 in)
screws with washers
INDUCTIVE
PROXIMITY
SENSORS
20
0.787
36.3
1.429
36.3
1.429
20
0.787
61.3
2.413
45.3
1.783
PARTICULAR
USE
SENSORS
Lateral arm assembly
MS-AJ1-A
SENSOR
OPTIONS
16.5
210
28.45
1.120
0.650
8.268
SIMPLE
WIRE-SAVING
UNITS
(33)
(1.299)
(16.5)
(0.650)
12
0.472
(134)(5.276) (Note 1)
6 0.236
4.2
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
0.165
Cable guide
(POM)
WIRE-SAVING
SYSTEMS
33 1.299
Sensor mounting bracket
MEASURE-
MENT
[Stainless steel (SUS304)]
(Note 2)
SENSORS
Arm joint
2-ø3.4 ø0.134
mounting holes
(Nylon 6)
(147)
STATIC
CONTROL
DEVICES
(218)
(8.583)
(5.787)
ø10 ø0.394 pipe
(Note 1)
[Stainless steel (SUS304)]
2-3.2 0.126
× 4.2 0.165
LASER
elongated holes
MARKERS
18
PLC
0.709
(44.5)
28
1.102
(1.752)
HUMAN
MACHINE
20
0.787
45
(203.5)
(8.012)
INTERFACES
8
0.315
Two M3 (length 14 mm 0.551 in) screws with
washers, two M3 (length 16 mm 0.630 in) screws
with washers, two M3 (length 18 mm 0.709 in)
screws with washers, one auxiliary mounting plate
for EQ-20 series and one auxiliary mounting plate
for EX-40 series are attached.
ENERGY
MANAGEMENT
SOLUTIONS
1.772
Base
(PA)
25.5
1.004
FA
32
1.260
COMPONENTS
10
0.394
MACHINE
VISION
2-ø6.6 ø0.260 mounting holes
SYSTEMS
Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part.
UV
CURING
2) Refer to MS-AJ1 / MS-AJ2 (basic assembly) for the assembly diagram with the sensor mounting bracket, sensor or reflector.
SYSTEMS
Lateral arm assembly
MS-AJ2-A
210
16.5
28.45
1.120
Sensor
Mounting
Stand
8.268
0.650
(16.5)
(0.650)
(33)
(1.299)
12
(134)(5.276) (Note1)
6 0.236
Sensor
Checker
0.472
4.2
ø10 ø0.394 pipe
0.165
Cable guide
(POM)
[Stainless steel (SUS304)]
Sensor
33
1.299
Controller
Sensor mounting bracket
Other
Products
[Stainless steel (SUS304)]
(Note 2)
Arm joint
2-ø3.4 ø0.134
(Nylon 6)
(147)
(5.787)
(Note 1)
mounting holes
MS-AJ
(210)
(8.268)
ø10 ø0.394 pipe
2-3.2 0.126 × 4.2 0.165
elongated holes
Base
(PA)
[Stainless steel (SUS304)]
Two M3 (length 14 mm 0.551 in) screws with
10
0.394
washers, two M3 (length 16 mm 0.630 in) screws
with washers, two M3 (length 18 mm 0.709 in)
screws with washers, one auxiliary mounting plate
for EQ-20 series and one auxiliary mounting plate
for EX-40 series are attached.
(36.5)
(1.437)
20
0.787
32
24.5
0.965
1.260
46
(208.5)
(8.209)
2-ø6.6 ø0.260
mounting holes
1.811
20
0.787
31
1.220
15
8
0.591 0.315
Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part.
2) Refer to MS-AJ1 / MS-AJ2 (basic assembly) for the assembly diagram with the sensor mounting bracket, sensor or reflector.
Universal Sensor Mounting Stand MS-AJ SERIES
958
DIMENSIONS (Unit: mm in)
FIBER
The CAD data can be downloaded from our website.
SENSORS
LASER
SENSORS
Assembly for fiber
Assembly for fiber
MS-AJ1-F
MS-AJ1-F MS-AJ2-F
PHOTO-
Fiber mounting bracket / MS-FD-1
ELECTRIC
SENSORS
16.5
210
28.45
1.120
0.650
8.268
12
0.472
(16.5)
(33)
MICRO
(134)(5.276) (Note)
ø10 ø0.394 pipe
[Stainless steel (SUS304)]
(0.650)
PHOTO-
ELECTRIC
SENSORS
6 0.236
(1.299)
Cable guide
(POM)
AREA
33
Fiber mounting bracket
SENSORS
1.299
t 2
[Stainless steel (SUS304)]
t 0.079
SAFETY LIGHT
CURTAINS /
SAFETY
4-M3 × 0.5 0.020
mounting holes
M3 threaded head fiber mounting hole
M4 threaded head fiber mounting hole
M6 threaded head fiber mounting hole
Arm joint
(Nylon 6)
COMPONENTS
(147)
(5.787)
(Note)
(218)
(8.583)
PRESSURE /
FLOW
ø10 ø0.394 pipe
R14 R0.551
4-M3 × 0.5 0.020
2-M3 × 0.5 0.020
SENSORS
4.2
[Stainless steel (SUS304)]
7
3.2 0.126
8
0.165
0.276
INDUCTIVE
PROXIMITY
SENSORS
0.315
22
13
18
0.709
40°
0.866
0.512
PARTICULAR
USE
(44.5)
(1.752)
28
1.102
8
SENSORS
8
0.315
4
4
0.157
6 0.236
9 0.354
13.5 0.531
0.315
5.5
0.217
13
0.512
0.157
20
25.5
1.004
3.2 0.126
SENSOR
OPTIONS
8
0.315
0.787
45
13
0.512
(203.5)
(8.012)
ø4 ø0.157
mounting hole
35
18.5
0.728
22
1.378
1.772
55
2.165
Base
(PA)
SIMPLE
25.5
1.004
WIRE-SAVING
UNITS
0.866
Material: Stainless steel (SUS304)
32
10
0.394
WIRE-SAVING
SYSTEMS
1.260
2-ø6.6 ø0.260 mounting holes
MEASURE-
MENT
Assembly dimensions with FD-L51
Note: The dimensions in the brackets indicate the adjustable range of the
movable part.
SENSORS
(Mounting part only)
STATIC
33
1.299
CONTROL
DEVICES
t 2
20
0.787
22
0.866
t 0.079
Assembly for fiber
MS-AJ2-F
LASER
MARKERS
16.5
210
28.45
1.120
0.650
8.268
12
0.472
(16.5)
PLC
(33)
(1.299)
(134)(5.276) (Note)
(0.650)
6 0.236
ø
10 ø0.394 pipe
55
HUMAN
[Stainless steel (SUS304)]
2.165
41.5
1.634
Cable guide
(POM)
MACHINE
INTERFACES
6.5
0.256
41.5
1.634
31
33
1.299
25
0.984
Fiber mounting bracket
[Stainless steel (SUS304)]
1.220
ENERGY
MANAGEMENT
SOLUTIONS
1.5
0.059
4.5 0.177
4
Arm joint
(Nylon 6)
16
0.157
0.630
4-M3 × 0.5 0.020
mounting holes
(147)
(5.787)
(Note)
FA
22
0.866
8
21
0.827
COMPONENTS
(210)
(8.268)
0.315
ø10 ø0.394 pipe
MACHINE
VISION
Base
(PA)
[Stainless steel (SUS304)]
SYSTEMS
Assembly dimensions with FD-FM2
(Mounting part only)
UV
10
0.394
CURING
SYSTEMS
(36.5)
(1.437)
t 2
20
33
20
t 0.079
0.787
1.299
0.787
22
32
24.5
0.965
0.866
1.260
46
(208.5)
(8.209)
M6 × 0.75 0.030
2-ø6.6 ø0.260
mounting holes
1.811
20
0.787
Sensor
Mounting
Stand
31
1.220
55
2.165
Sensor
Checker
Opposing faces10 0.394,
35
(45)
(1.772)
thickness 2 0.079 1.378
15
8
(28.5)
(1.122)
Sensor
15
0.591
0.591 0.315
Controller
Other
Note: The dimensions in the brackets indicate the adjustable range of the
movable part.
Products
22
5
(10)
0.866
ø3.5
ø0.138
0.197
(0.394)
23.5
0.925
Toothed lock washer ø11 ø0.433
MS-AJ
Note: The above diagram is in case of M6 threaded head fiber.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明