MA26V11 [PANASONIC]
Silicon epitaxial planar type; 硅外延平面型
| 型号： | MA26V11 |
| 厂家： | 
PANASONIC |
| 描述： | Silicon epitaxial planar type |
| 文件： | 总3页 (文件大小：71K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Variable Capacitance Diodes
MA26V11
Silicon epitaxial planar type
Unit: mm
For VCO
3
2
1
■ Features
+0.01
0.39
• Good linearity and large capacitance-ratio in CD − VR relation
• Small series resistance rD
• High frequency type by this low capacitance
1.00 0.0ꢀ
−0.03
0.2ꢀ 0.0ꢀ
0.2ꢀ 0.0ꢀ
1
2
3
■ Absolute Maximum Ratings Ta = 25°C
0.6ꢀ 0.01
0.0ꢀ 0.03
Parameter
Reverse voltage
Symbol
VR
Rating
Unit
V
8
Junction temperature
Storage temperature
Tj
125
°C
°C
1: Anode
2: N.C.
Tstg
−55 to +125
3: Cathode
ML3-N2 Package
Marking Symbol: 2L
■ Electrical Characteristics Ta = 25°C 3°C
Parameter
Reverse current
Symbol
IR
Conditions
Min
Typ
Max
10
Unit
nA
VR = 5 V
Diode capacitance
CD1V
VR = 1 V, f = 1 MHz
VR = 4 V, f = 1 MHz
2.77
1.23
2.16
3.01
1.34
2.34
0.35
pF
CD4V
Capacitance ratio
Series resistance *
CD1V / CD4V
rD
Ω
VR = 4 V, f = 470 MHz
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 470 MHz.
3. : Measuring instrument; YHP MODEL 4191A RF IMPEDANCE ANALYZER
*
Publication date: January 2004
SKD00079BED
1
MA26V11
IF VF
CD VR
CD Ta
1.045
1.035
1.025
1.015
1.005
0.995
0.985
0.975
0.965
10
1.2
1.0
0.8
f = 1 MHz
f = 1 MHz
Ta = 25°C
VR = 1 V
Ta = 85°C
25°C
4 V
1
0.6
0.4
0.2
0
−25°C
10−1
−20
0
20
40
60
80
0
2
4
6
8
10
12
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4
Forward voltage VF (V)
Ambient temperature Ta (°C)
Reverse voltage VR (V)
IR Ta
1
10−1
10−2
10−3
VR = 5 V
−25
−5
15
35
55
75
Ambient temperature Ta (°C)
SKD00079BED
2
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general elec-
tronic equipment (such as office equipment, communications equipment, measuring instruments and house-
hold appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus-
tion equipment, life support systems and safety devices) in which exceptional quality and reliability are
required, or if the failure or malfunction of the products may directly jeopardize life or harm the human
body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifica-
tions satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rat-
ing, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not
be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such
as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent
physical injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP
相关型号：
MA26V17
Variable Capacitance Diode, Ultra High Frequency, 2.98pF C(T), 6V, Silicon, ROHS COMPLIANT, ML3-N2, 3 PIN
PANASONIC
MA26V19
Variable Capacitance Diode, Ultra High Frequency, 2.4pF C(T), 6V, Silicon, ROHS COMPLIANT, ML3-N2, 3 PIN
PANASONIC
MA26V20
Variable Capacitance Diode, Ultra High Frequency, 18.75pF C(T), 6V, Silicon, ROHS COMPLIANT, ML3-N2, 3 PIN
PANASONIC
MA26V22
Variable Capacitance Diode, Ultra High Frequency, 18.4pF C(T), 6V, Silicon, ROHS COMPLIANT, ML3-N2, 3 PIN
PANASONIC
©2020 ICPDF网 联系我们和版权申明