EX-31A-PN [PANASONIC]
Threaded Miniature Photoelectric Sensor;型号: | EX-31A-PN |
厂家: | PANASONIC |
描述: | Threaded Miniature Photoelectric Sensor |
文件: | 总6页 (文件大小:554K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Amplifier Built-in
Threaded Miniature Photoelectric Sensor
307
EX-30 SERIES Ver.2
■General terms and conditions............. F-3
■Glossary of terms........................ P.1549~
■Selection guide ............................. P.231~
■General precautions ................... P.1552~
FIBER
SENSORS
Related Information
LASER
SENSORS
PHOTOELECTRIC
SENSORS
Ver.2
Recognition
Excluding EX-33(-PN),
MICRO
PHOTOELECTRIC
SENSORS
(
)
5 m cable length type
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
panasonic.net/id/pidsx/global
PNP output
type available
STATIC
CONTROL
DEVICES
LASER
MARKERS
The next-generation new form series
A new alternative to fiber sensors
PLC
HUMAN MACHINE
INTERFACES
Simpler design
New design solves all weak points of fiber sensors
ENERGY
MANAGEMENT
SOLUTIONS
All you need to do is to make a ø4 mm
ø0.157 in hole where you would like
to stop or check the object (ø6 mm
ø0.236 in hole for reflective type).
Furthermore, the center of the
sensing axis is the same as the
center of the mounting hole, which
makes it much easier to set the
sensing position.
The EX-30 series solves all of the difficulties associated
with fiber sensors, such as:
• Difficulty finding a suitable place for the amplifier
• Fragility of the fiber
• Extra space needed because of difficulty in bending
the fiber
• The nuisance of having to use a protective tube to
prevent fiber breakage
FA COMPONENTS
Center of
sensing axis
MACHINE VISION
SYSTEMS
Center of
mounting hole
UV CURING
SYSTEMS
BASIC PERFORMANCE
Selection
Guide
Amplifier
Built-in
Electric power saving*
Long sensing range
Power Supply
The EX-30 series achieves reductions in power
consumption of up to 65 %. These sensors contribute to
environmental friendliness.
The EX-30 series achieves long distance sensing
[thru-beam type: 500 mm 19.685 in (EX-33(-PN):
800 mm 31.496 in), reflective type: 50 mm 1.969 in.]
Built-in
Amplifier-
separated
EX-Z
CX-400
CY-100
EX-10
500 mm 19.685 in
50 mm 1.969 in
EX-33(-PN):
800 mm 31.496 in
A maximum 35% reduction
compared to conventional sensors
Thru-beam type
Diffuse reflective type
EX-20
EX-30
EX-40
Globally usable
CX-440
EQ-30
It conforms to the EMC Directive and obtains the UL
Recognition. (excluding 5 m 16.405 ft cable length type)
Moreover, PNP output type which is much in demand in
Europe, is also available.
*Effective from production in April 2011.
EQ-500
MQ-W
High response speed of 0.5 ms
RX-LS200
RX
The same high response speed of 0.5 ms as fiber sensor
amplifiers is provided, making these sensors ideal for
sensing small objects, counting objects that are moving
quickly and positioning items such as circuit boards.
RT-610
Threaded Miniature Photoelectric Sensor EX-30SERIES Ver.2
308
APPLICATIONS
FIBER
SENSORS
LASER
Detecting IC height
Detecting quantity of labels in
label magazine
Checking IC pins (using slit masks)
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
VARIETIES
SENSOR
OPTIONS
EX-33(-PN)
New thru-beam types now feature operation mode switch and sensitivity adjuster!
SIMPLE
WIRE-SAVING
UNITS
2
1
3
Bright 2-color indicator
Operation mode switch
Sensitivity adjuster
EX-33(-PN)
WIRE-SAVING
SYSTEMS
Switching between light-ON and It is convenient when you need
A bright 2-color indicator has
been incorporated in all types.
dark-ON operating modes is
fine adjustment.
possible with a single model.
MEASUREMENT
SENSORS
Operation indicator
(Orange)
Stability indicator
Operation mode switch
Sensitivity adjuster
STATIC
CONTROL
DEVICES
(Green)
800 mm
31.496 in
LASER
MARKERS
PLC
Emitter
Receiver
Receiver
HUMAN MACHINE
INTERFACES
MOUNTING / SIZE
ENERGY
MANAGEMENT
SOLUTIONS
Can be installed in the same way as standard fibers
Single-point tightening cuts down on installation work by half
FA COMPONENTS
The EX-30 series can be screwmounted (M4 for thru-
beam type, M6 for reflective type) in the same way as
standard fiber sensors. This means that they can be
inserted into production lines in exactly the same way as
conventional high-priced fiber sensors.
Conventional photoelectric sensors required four (for
thru-beam type) or two (for reflective type) mounting
holes and screws to be used. However, the EX-30 series
is installed with a single screw, thus cutting down on
installation work by half.
MACHINE VISION
SYSTEMS
UV CURING
SYSTEMS
Selection
Guide
Amplifier
Built-in
Power Supply
Built-in
Amplifier-
separated
M4
Thru-beam type
(Reflective type: M6)
EX-Z
Conventional model
EX-30
CX-400
CY-100
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
Takes up very little space
Unlike conventional fibers, bending radius is not a
problem, so that the sensor can be securely installed
alongside conveyors.
EX-30
Fiber
RT-610
Threaded Miniature Photoelectric Sensor EX-30SERIES Ver.2
309
ENVIRONMENTAL RESISTANCE
FUNCTIONS
FIBER
SENSORS
Incorporated an inverter countermeasure circuit*
Bright 2-color indicator
LASER
SENSORS
Fluoressent
light
The EX-30 series become
significantly stronger against inverter
light and other extraneous light.
A bright 2-color indicator
is incorporated in all
types.
PHOTOELECTRIC
SENSORS
Stability indicator
(Green)
MICRO
PHOTOELECTRIC
SENSORS
Operation indicator
(Orange)
*Effective from production in April 2011.
AREA
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
No protective tube needed
OPERABILITY
PARTICULAR
The EX-30 series has high
bending strength, so that
the protective tube used to
protect conventional fiber
from breakage is not needed.
This also adds up to excellent
cost performance.
Incorporates a sensitivity adjuster (Excluding EX-31□)
USE SENSORS
Sensitivity
SENSOR
OPTIONS
The sensor incorporates
a sensitivity adjuster. It is
No protective tube
needed
adjuster
SIMPLE
WIRE-SAVING
UNITS
convenient when you need
fine adjustment.
WIRE-SAVING
SYSTEMS
Waterproof IP67 (IEC)
MEASUREMENT
SENSORS
*This photo is a reflective type.
The sensors features an
IP67 rating to allow their use
in process lines where water
is used or splashed.
STATIC
CONTROL
DEVICES
LASER
MARKERS
Note: If water splashes on the sensor
during sensing operation, it
PLC
may sense water as an object.
HUMAN MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
ORDER GUIDE
FA COMPONENTS
Model No.
(Note)
Output
operation
MACHINE VISION
SYSTEMS
Type
Appearance
Sensing range
Output
UV CURING
SYSTEMS
Light-ON
Dark-ON
Light-ON
Dark-ON
EX-31A
NPN open-collector
transistor
EX-31B
500 mm
19.685 in
EX-31A-PN
EX-31B-PN
PNP open-collector
transistor
Selection
Guide
Amplifier
Built-in
NPN open-collector
transistor
EX-33
Switchable
either Light-ON or
Dark-ON
800 mm
31.496 in
Power Supply
Built-in
PNP open-collector
transistor
EX-33-PN
Amplifier-
separated
Light-ON
Dark-ON
Light-ON
Dark-ON
EX-32A
NPN open-collector
transistor
EX-32B
50 mm
1.969 in
EX-Z
CX-400
CY-100
EX-10
EX-32A-PN
EX-32B-PN
PNP open-collector
transistor
Note: The model No. with “P” shown on the label affixed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver.
EX-20
5 m 16.404 ft cable length type
EX-30
5 m 16.404 ft cable length type(standard: 2 m 6.562 ft) is also available for NPN output type [excluding EX-33(-PN)].
When ordering this type, suffix “-C5” to the model No.
(e.g.) 5 m 16.404 ft cable length type of EX-31A is “EX-31A-C5”.
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
RT-610
Threaded Miniature Photoelectric Sensor EX-30SERIES Ver.2
310
OPTIONS
FIBER
SENSORS
LASER
SENSORS
Slit mask
Designation
Model No.
Description
PHOTO-
• OS-EX30-1
ELECTRIC
SENSORS
MICRO
• Sensing range: 200 mm 7.874 in [EX-31□(-PN)]
320 mm 12.598 in [EX-33(-PN)]
• Min. sensing object: ø2 mm ø0.079 in
PHOTO-
ELECTRIC
SENSORS
Slit on one side
Slit on both sides
Slit mask
For thru-beam
type sensor only
OS-EX30-1
Slit size ø1 mm
ø0.039 in
AREA
SENSORS
• Sensing range: 150 mm 5.906 in [EX-31□(-PN)]
240 mm 9.449 in [EX-33(-PN)]
• Min. sensing object: ø1 mm ø0.039 in
SAFETY LIGHT
Apply the optional slit mask when detecting small
objects or for increasing the accuracy of sensing
position.
However, the sensing range is reduced when the
slit mask is mounted.
CURTAINS
SAFETY
/
COMPONENTS
Note: One slit and two spacers are provided per set. Two sets are required when installing on both sides.
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
SPECIFICATIONS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
Type
Thru-beam
Diffuse reflective
With operation mode switch
EX-33
SIMPLE
WIRE-SAVING
UNITS
NPN output
PNP output
EX-31A
EX-31B
EX-32A
EX-32A-PN
EX-32B
Item
EX-31A-PN
EX-31B-PN
EX-33-PN
EX-32B-PN
WIRE-SAVING
SYSTEMS
CE marking directive compliance
Sensing range
EMC Directive, RoHS Directive
800 mm 31.496 in
MEASURE-
MENT
500 mm 19.685 in
50 mm 1.969 in (Note 2)
SENSORS
Sensing object
ø2 mm ø0.079 in or more opaque object (Completely beam interrupted objects)
Opaque, translucent or transparent object (Note 3)
15 % or less of operation distance (Note 2)
STATIC
CONTROL
DEVICES
Hysteresis
Repeatability
(perpendicular to sensing axis)
LASER
0.05 mm 0.002 in or less
0.5 mm 0.020 in or less
MARKERS
Supply voltage
12 to 24 V DC ±10 % Ripple P-P 10 % or less
PLC
Current consumption
Emitter: 10 mA or less, Receiver: 10 mA or less
13 mA or less
HUMAN
MACHINE
INTERFACES
<NPN output type>
<PNP output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
ENERGY
MANAGEMENT
SOLUTIONS
Output
FA
COMPONENTS
Utilization category
Output operation
DC-12 or DC-13
MACHINE
VISION
SYSTEMS
Switchable either
Light-ON or Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
UV
CURING
SYSTEMS
Short-circuit protection
Response time
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Operation indicator
Green LED
Green LED
Selection
Guide
lights up under stable light received condition or
stable dark condition, incorporated on the receiver
lights up under stable light received condition or
stable dark condition
Stability indicator
Amplifier
Built-in
Power Supply
Sensitivity adjuster
Pollution degree
Protection
Continuously variable adjuster
Built-in
Amplifier-
separated
3 (Industrial environment)
IP67 (IEC)
Ambient temperature
Ambient humidity
Ambient illuminance
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Emitting element
Material
–25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +70 °C –22 to +158 °F
35 to 85 % RH, Storage: 35 to 85 % RH
EX-Z
CX-400
CY-100
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
Incandescent light: 3,000 ℓx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated), Lens: Polycarbonate [EX-32□(-PN): Acrylic], Enclosure cover: Polycarbonate
0.1 mm2 3-core (thru-beam type sensor emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver).
Cable
Cable extension
Net weight (each emitter and receiver): 20 g approx.
Net weight: 20 g approx., Gross weight: 45 g approx.
Gross weight: 65 g approx.
Weight
Accessories
Nut: 2 pcs., Toothed lock washer: 2 pcs.
Nut: 1 pc., Toothed lock washer: 1 pc.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The sensing range and the hysteresis are specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.
3) Make sure to confirm detection with an actual sensor before use.
RT-610
Threaded Miniature Photoelectric Sensor EX-30SERIES Ver.2
311
FIBER
I/O CIRCUIT AND WIRING DIAGRAMS
SENSORS
LASER
NPN output type
SENSORS
I/O circuit diagram
Wiring diagram
PHOTO-
ELECTRIC
SENSORS
Color code
Color code
Load
Black (Note)
Blue
MICRO
PHOTO-
D1
(Brown) +V
Brown
ELECTRIC
SENSORS
Load
AREA
D2
+
–
(Black) Output (Note)
12 to 24 V DC
10 %
+
–
12 to 24 V DC
10 %
SENSORS
50 mA max.
(Blue) 0 V
SAFETY LIGHT
ZD
Tr
CURTAINS
/
SAFETY
COMPONENTS
PRESSURE /
FLOW
Note: The emitter of the thru-beam type sensor does not incorporate the
Internal circuit
Users’ circuit
SENSORS
black wire.
Note: The emitter of the thru-beam type sensor does not incorporate the output.
INDUCTIVE
PROXIMITY
SENSORS
Symbols … D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
PARTICULAR
USE
SENSORS
Tr : NPN output transistor
SENSOR
OPTIONS
PNP output type
I/O circuit diagram
Color code
SIMPLE
WIRE-SAVING
UNITS
Wiring diagram
WIRE-SAVING
SYSTEMS
Color code
MEASURE-
MENT
Brown
(Brown) +V
SENSORS
Tr
ZD
50 mA max.
+
+
STATIC
CONTROL
DEVICES
12 to 24 V DC
Black (Note)
Load
12 to 24 V DC
10 %
10 %
D2 (Black) Output (Note)
(Blue) 0 V
–
–
Load
D1
Blue
LASER
MARKERS
Note: The emitter of the thru-beam type sensor does not incorporate the
Internal circuit
Users’ circuit
PLC
black wire.
Note: The emitter of the thru-beam type sensor does not incorporate the output.
HUMAN
MACHINE
Symbols … D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
Tr : PNP output transistor
FA
COMPONENTS
SENSING CHARACTERISTICS (TYPICAL)
MACHINE
VISION
SYSTEMS
Thru-beam type
EX-31□ EX-31□-PN
UV
CURING
Parallel deviation
Angular deviation
Parallel deviation with slit mask on one side
Parallel deviation with slit masks on both sides
SYSTEMS
800
800
31.496
31.496
200
200
600
600
7.874
7.874
23.622
23.622
Selection
Guide
400
400
Amplifier
Emitter
Emitter
Built-in
15.748
15.748
Emitter
Emitter
100
100
Power Supply
Built-in
3.937
3.937
ℓ
ℓ
L
L
ℓ
θ
L
200
L
200
Amplifier-
7.874
7.874
separated
Receiver
Receiver
Receiver
Receiver
0
0
0
0
100
50
1.969
Left
0
50
1.969
Right
100
40
20
Left
0
20
Right
40
40
1.575
20
0.787
Left
0
20
0.787
Right
40
40
20
0.787
Left
0
20
40
EX-Z
CX-400
CY-100
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
3.937
3.937
1.575
1.575
0.787
1.575
Center
Center
Center
Center
Right
Operating angle θ ( ° )
Operating point ℓ (mm in)
Operating point ℓ (mm in)
Operating point ℓ (mm in)
Thru-beam type
Diffuse reflective type
EX-31□ EX-31□-PN
EX-32□ EX-32□-PN
Sensing field
Correlation between sensing object size and sensing range
Correlation between setting distance and excess gain
Correlation between setting distance and excess gain
100
80
80
100
3.150
3.150
As the sensing object size becomes smaller than
the standard size (white non-glossy paper
50
50
100 × 100 mm 3.937 × 3.937 in), the sensing range
60
60
shortens, as shown in this graph.
2.362
2.362
100 × 100 mm
a × a mm a × a in
40
3.937 × 3.937 in
40
10
5
10
5
White non-glossy paper
White non-glossy paper
1.575
1.575
L
ℓ
L
20
20
0.787
0.787
Sensor
Sensor
0
1
1
50
100
150
200
10
5
0
5
10
0.394
0
0
400
800 1,200 1,600 2,000
0
50
100
150
200
250
1.969
3.937
5.906
7.874
0.394
0.197
0.197
15.748 31.496 47.244 62.992 78.740
Setting distance L (mm in)
1.969 3.937 5.906 7.874 9.843
Setting distance L (mm in)
RT-610
Left
Center
Right
White non-glossy paper
side length a (mm in)
Operating point ℓ (mm in)
Threaded Miniature Photoelectric Sensor EX-30SERIES Ver.2
312
SENSING CHARACTERISTICS (TYPICAL)
FIBER
SENSORS
Thru-beam type
LASER
EX-33 EX-33-PN
Parallel deviation
SENSORS
Angular deviation
Parallel deviation with slit mask on one side
Parallel deviation with slit masks on both sides
PHOTO-
400
400
15.748
ELECTRIC
SENSORS
15.748
MICRO
1,000
39.370
1,000
39.370
PHOTO-
ELECTRIC
SENSORS
300
300
11.811
11.811
Emitter
ℓ
AREA
SENSORS
200
7.874
200
7.874
Emitter
Emitter
Emitter
L
SAFETY LIGHT
500
19.685
500
19.685
CURTAINS
SAFETY
/
θ
ℓ
ℓ
L
L
L
COMPONENTS
100
3.937
100
3.937
Receiver
PRESSURE /
FLOW
Receiver
Receiver
20
Receiver
SENSORS
0
0
0
0
INDUCTIVE
PROXIMITY
SENSORS
100
50
0
50
100
3.937
40
20
0
20
Right
40
40
20
0
20
40
40
20
0
40
1.575
Right
3.937
1.969
1.969
Left
Center
1.575
0.787
0.787
1.575
1.575
0.787
0.787
Left
Center
Operating point ℓ (mm in)
Right
Operating angle θ ( ° )
Left
Center
Right
Left
Center
Operating point ℓ (mm in)
PARTICULAR
USE
Operating point ℓ (mm in)
SENSORS
PRECAUTIONS FOR PROPER USE
Refer to p.1552~ for general precautions.
SENSOR
OPTIONS
• Do not use during the initial transient time (50 ms
approx.) after the power supply is switched on.
• In case of using the sensor at a place where
static electricity is generated, use a metal
mounting plate. Also, ensure to ground the
mounting plate.
SIMPLE
• Never use this product as a sensing device for personnel protection.
WIRE-SAVING
UNITS
• In case of using sensing devices for personnel protection,
use products which meet laws and standards, such as
OSHA, ANSI or IEC etc., for personnel protection applicable
in each region or country.
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
LASER
Sensor
Sensor
EX-31□ EX-31□-PN
EX-33 EX-33-PN
MARKERS
Opposing faces 7 0.276,
thickness 2.4 0.094
Opposing faces 7 0.276,
thickness 2.4 0.094
Stability indicator
(Green) (Note)
Stability indicator
(Green) (Note 1)
PLC
HUMAN
MACHINE
INTERFACES
Toothed lock washer
ø8.5 ø0.035
Toothed lock washer
ø8.5 ø0.035
Operation indicator
(Orange) (Note)
Operation indicator
(Orange) (Note 1)
ENERGY
MANAGEMENT
SOLUTIONS
0.3
0.012
0.3
15.6
15.6
0.012
0.614
0.614
11
0.433
FA
COMPONENTS
3.1
8.2
0.323
7
3.1
Beam axis
Beam axis
0.122
0.122
MACHINE
VISION
7
14
7
7
Operation mode
switch (Note 2)
01.5451
0.276 0.276
0.551
0.276 0.276
SYSTEMS
UV
CURING
SYSTEMS
14
14
ø7.2
0.551
0.551
ø0.283
0.75
M4 × 0.7
0.028
M4 × 0.7
0.030
0.028
3
3
0.118
5.1
0.201
3.8
0.150
0.118
5.1
Selection
Guide
ø2.5 ø0.098 cable, 2 m 6.562 ft long
ø2.5 ø0.098 cable, 2 m 6.562 ft long
0.201
3.8
Amplifier
Built-in
0.150
Note: Not incorporated on the emitter.
Notes: 1) Not incorporated on the emitter.
2) It is the sensitivity adjuster on the emitter.
Power Supply
Built-in
Amplifier-
separated
Sensor
Slit mask (optional)
EX-32□ EX-32□-PN
OS-EX30-1
Toothed lock washer ø11 ø0.433
Opposing faces 10 0.394,
thickness 2 0.079
EX-Z
Stability indicator
(Green)
Slit mask
CX-400
CY-100
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
(5.3)
(0.209)
7
Operation indicator
(Orange)
(0.276)
0.3
0.012
(8.02)
15.6
0.614
(0.316)
11
Internal thread part
Beam-
8.2
7
5.1
M4 × 0.7 0.028,
3.8 0.150 deep
receiving part
0.201
ø1 ø0.039
7
14
0.551
Sensitivity
adjuster
0.276 0.276
Material: Brass(Nickel plated)
Spacer
14
0.551
ø7.2
ø0.283
0.75
0.030
M6 × 0.75
0.030
3 0.118
ø8
ø4.3
ø0.315
ø0.169
Beam-
emitting
part
1
5.1
0.201
3.8
0.150
0.039
Material: POM
ø2.5 ø0.098 cable, 2 m 6.562 ft long
RT-610
相关型号:
©2020 ICPDF网 联系我们和版权申明