DSP1A-DC9V-R [PANASONIC]
Electromechanical Relay, SPST, Latched, 11.7VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output;型号: | DSP1A-DC9V-R |
厂家: | PANASONIC |
描述: | Electromechanical Relay, SPST, Latched, 11.7VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output PC 继电器 |
文件: | 总7页 (文件大小:1634K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1a 8A, 1a1b/2a 5A
small polarized power
relays
DS-P RELAYS
4. High breakdown voltage
Breakdown voltage has been raised by
keeping the coil and contacts separate.
TYPICAL APPLICATIONS
1. Office and industrial electronic
devices
Between contact
Between contacts
and coil
2. Terminal devices of information
processing equipment, such as
printer, data recorder.
3. Office equipment (copier, facsimile)
4. Measuring instruments
5. NC machines, temperature
controllers and programmable logic
controllers.
3,000 Vrms for 1 min.
5,000 V surge
1,000 Vrms for 1 min.
1,500 V surge
breakdown voltage
breakdown voltage
Conforms with FCC Part 68
5. Latching types available
6. Wide variation
FEATURES
Three types of contact arrangement
are offered: 1a, 2a, and 1a1b. In
addition, each is available in standard
and reversed polarity types.
7. Sealed construction allows
automatic washing
1. Compact with high contact rating
Even with small 10 mm .394 inch (H) x
11 mm .433 inch (W) x 20 mm .787 inch
(L) (dimensions, high capacity
switching is provided: 1a, 8 A 250 V
AC; 2a and 1a1b, 5 A 250 V AC.
2. High switching capability
High contact pressure, low contact
bounce, and wiping operation improve
resistance to weld bonding. Resistant
against lamp load and dielectric
loading: 1a achieves maximum
switching capacity of 2,000 VA
(8A 250 V AC).
8. Complies with safety standards
- Complies with Japan Electrical Appli-
ance and Material Safety Law
requirements for operating 200 V
power supply circuits
- Complies with UL, CSA and TÜV
safety standards
- Complies with EN 60335 / GWT (test
report available)
3. High sensitivity
Using the same type of high-
9. Creepage distance and clearances
between contact and coil: 3.5 mm
10. Sockets are available.
performance polar magnetic circuits as
DS relays, by matching the spring load
to the magnetic force of attraction,
greater sensitivity has been achieved.
The resultant pick up sensitivity of
about 190 mW makes possible direct
driving of transistors and chips.
ORDERING INFORMATION
DSP
Contact arrangement
1a: 1 Form A
1: 1 Form A 1 Form B
2a: 2 Form A
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
Coil voltage
DC 3, 5, 6, 9, 12, 24 V
Polarity
Nil: Standard polarity
R: Reverse polarity
Contact material
G AgSnO2 type
F: 1 Form A 1 Form B
Nil: 1 Form A, 2 Form A
Notes: 1. Reverse polarity types available (add suffix-R)
2. UL/CSA, TÜV approved type is standard.
ds_61A05_en_dsp: 070313D
1
DSP
TYPES
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching
Part No.
Contact
Nominal coil
voltage
arrangement
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
DSP1a-DC3V
DSP1a-DC5V
DSP1a-DC6V
DSP1a-DC9V
DSP1a-DC12V
DSP1a-DC24V
DSP1-DC3V-F
DSP1-DC5V-F
DSP1-DC6V-F
DSP1-DC9V-F
DSP1-DC12V-F
DSP1-DC24V-F
DSP2a-DC3V
DSP2a-DC5V
DSP2a-DC6V
DSP2a-DC9V
DSP2a-DC12V
DSP2a-DC24V
DSP1a-L-DC3V
DSP1a-L-DC5V
DSP1a-L-DC6V
DSP1a-L-DC9V
DSP1a-L-DC12V
DSP1a-L-DC24V
DSP1-L-DC3V-F
DSP1-L-DC5V-F
DSP1-L-DC6V-F
DSP1-L-DC9V-F
DSP1-L-DC12V-F
DSP1-L-DC24V-F
DSP2a-L-DC3V
DSP2a-L-DC5V
DSP2a-L-DC6V
DSP2a-L-DC9V
DSP2a-L-DC12V
DSP2a-L-DC24V
DSP1a-L2-DC3V
DSP1a-L2-DC5V
DSP1a-L2-DC6V
DSP1a-L2-DC9V
DSP1a-L2-DC12V
DSP1a-L2-DC24V
DSP1-L2-DC3V-F
DSP1-L2-DC5V-F
DSP1-L2-DC6V-F
DSP1-L2-DC9V-F
DSP1-L2-DC12V-F
DSP1-L2-DC24V-F
DSP2a-L2-DC3V
DSP2a-L2-DC5V
DSP2a-L2-DC6V
DSP2a-L2-DC9V
DSP2a-L2-DC12V
DSP2a-L2-DC24V
1 Form A
1 Form A
1 Form B
2 Form A
Standard packing: Carton: 50 pcs.; Case: 500 pcs.
Note: Reverse polarity type are manufactured by lot upon receipt of order. Self-clinching types are also available, please consult us.
RATING
1. Coil data
1) Single side stable
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
Max. allowable voltage
power
(at 20C 68F)
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
100mA
60mA
30
83
120
270
480
1,920
80%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
50mA
130%V of
nominal voltage
300mW
33.3mA
25mA
12.5mA
2) 1 coil latching
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Max. allowable voltage
(at 20C 68F)
Set coil
50mA
Reset coil
50mA
Set coil
60
Reset coil
60
167
240
540
Set coil
Reset coil
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
30mA
30mA
167
240
540
960
3,840
80%V or less of
nominal voltage
(Initial)
80%V or less of
nominal voltage
(Initial)
25mA
25mA
130%V of
nominal voltage
150mW
150mW
16.7mA
12.5mA
6.3mA
16.7mA
12.5mA
6.3mA
960
3,840
3) 2 coil latching
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Max. allowable voltage
(at 20C 68F)
Set coil
100mA
60mA
Reset coil
100mA
60mA
Set coil
30
83
120
270
480
1,920
Reset coil
30
83
120
270
480
1,920
Set coil
Reset coil
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
80%V or less of
nominal voltage
(Initial)
80%V or less of
nominal voltage
(Initial)
50mA
50mA
130%V of
nominal voltage
300mW
300mW
33.3mA
25mA
33.3mA
25mA
12.5mA
12.5mA
ds_61A05_en_dsp: 070313D
2
DSP
2. Specifications
Characteristics
Item
Specifications
1 Form A 1 Form B
Arrangement
1 Form A
2 Form A
Contact
Initial contact resistance, max.
Contact material
Max. 30 m (By voltage drop 6 V DC 1A)
Au-flashed AgSnO2 type
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
8 A 250 V AC, 5A 30V DC
2,000 VA, 150 W
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 125 V DC
5 A AC, DC
Rating
Max. switching current
8 A AC, 5 A DC
Nominal operating power
Min. switching capacity (Reference value)*1
Single side stable, 2 coil latching: 300 mW. 1 coil latching: 150mW
10m A 5 V DC
Min. 1,000M (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Insulation resistance (Initial)
Between open contacts
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms (1 Form A 1 Form B, 2 Form A) (Detection current: 10mA.)
3,000 Vrms for 1min. (Detection current: 10mA.)
Breakdown voltage
Between contact sets
(Initial)
Between contact and coil
Electrical
characteristics
Surge breakdown
between contacts and coil
voltage*2
5,000 V
Temperature rise (at 65C 149F)
Max. 55C
Max. 40C
Max. 55C
Operate time [Set time] (at 20C 68F)
Max. 10 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
Max. 5 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
(without diode)
Release time [Reset time] (at 20C 68F)
Functional
Shock resistance
Min. 196 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 2 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 3.5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Min. 5107 (at 180 times/min.)
Expected life
Conditions
Min. 105 (resistive load)
Ambient temperature:
–40C to +60C
Ambient temperature:
–40C to +65C
–40F to +149F
Ambient temperature:
–40C to +60C
Conditions for operation, transport and storage*3
(Not freezing and condensing at low temperature)
–40F to +140F
–40F to +140F
250C 482F (10s), 300C 572F (5s), 350C 662F (3s)
Solder heating
(Soldering depth: 2/3 terminal pitch)
Max. operating speed
3 cps
Unit weight
Notes:
Approx. 4.5 g .16 oz
*1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2 Wave is standard shock voltage of 1.250s according to JEC-212-1981
*3 Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
REFERENCE DATA
1. Max. switching capacity
2.-(1) Life curve (1 Form A 1 Form B)
2.-(2) Life curve (1 Form A 1 Form B)
10
AC resistive
load (1a)
100
100
30 V DC resistive
AC resistive
load
265 V-130 V AC cosϕ = 1
(1a1b,2a)
50
DC resistive
load (1a)
30 V DC L/R = 7 ms
1
10
265 V-130 V AC
cosϕ = 0.4
DC resistive load
(1a1b,2a)
10
0
1
2
3
4
5
6
7
0.5
1
5
10
0.1
10
100
1000
Switching capacity, A
Switching capacity, A
Contact voltage, V
ds_61A05_en_dsp: 070313D
3
DSP
3.-(1) Coil temperature rise (1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
3.-(2) Coil temperature rise
(1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
60
3.-(3) Coil temperature rise (2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.
60
60
50
40
30
20
10
0
5A
8A
0A
50
40
30
20
10
0
50
40
30
20
10
0
5A
0A
0A
80
100
120
80
100
120
80
100
120
Coil applied voltage, %V
Coil applied voltage, %V
Coil applied voltage, %V
4.-(1) Operate & release time
(without diode, 1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
4.-(2) Operate & release time
(without diode, 1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
4.-(3) Operate & release time
(without diode, 2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.)
7
6
9
8
7
9
8
7
6
5
6
Operate time
Operate time
5
4
3
2
1
0
5
4
3
Operate time
Max.
4
3
x
Max.
x
Min.
Min.
Max.
x
Release time
2
Min.
2
1
0
Release time
Release time
Max.
Max.
x
Max.
1
0
x
x
Min.
Min.
Min.
80
100
120
80
100
110
80
100
120
Coil applied voltage, %V
Coil applied voltage, %V
Coil applied voltage, %V
4.-(4) Operate & release time
(with diode, 1 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
4.-(5) Operate & release time
(with diode, 1 Form A 1 Form B)
Tested sample: DSP1-DC12V, 5 pcs.
4.-(6) Operate & release time
(with diode, 2 Form A)
Tested sample: DSP2a-DC12V, 5 pcs.
9
8
7
6
9
8
7
6
9
8
7
6
Operate time
Operate time
Operate time
5
4
3
5
4
3
2
1
0
5
4
3
2
Max.
x
Max.
x
Max.
Max.
Min.
Max.
Min.
Max.
x
x
x
x
Min.
2
1
0
Min.
Min.
Min.
Release time
100
Release time
1
Release time
100
0
80
100
120
80
110
80
120
Coil applied voltage, %V
Coil applied voltage, %V
Coil applied voltage, %V
5.-(1) Change of pick-up and drop-out voltage
(1 Form A)
5.-(2) Change of pick-up and drop-out voltage
(1 Form A 1 Form B)
5.-(3) Change of pick-up and drop-out voltage
(2 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
Tested sample: DSP1-DC12V, 5 pcs.
Tested sample: DSP2a-DC12V, 5 pcs.
Drop-out
voltage
Pick-up voltage
50
50
50
Drop-out
voltage
Pick-up voltage
Pick-up voltage
-40 -20
0
-40 -20
0
-40 -20
0
20 40 60
Ambient
temperature, °C
80
20 40 60 80
Ambient
20 40 60 80
Ambient
temperature, °C
temperature, °C
Drop-out voltage
-50
-50
-50
ds_61A05_en_dsp: 070313D
4
DSP
6.-(1) Influence of adjacent mounting
(1 Form A)
6.-(2) Influence of adjacent mounting
(1 Form A 1 Form B)
6.-(3) Influence of adjacent mounting
(2 Form A)
Tested sample: DSP1a-DC12V, 5 pcs.
Tested sample: DSP1-DC12V, 5 pcs.
Tested sample: DSP2a-DC12V, 5 pcs.
15
15
10
Pick-up voltage
Pick-up voltage
Pick-up voltage
8
A
B
C
A
B
C
A
B
C
10
10
6
4
2
5
A, C
A, C
5
A, C
relays
relays
relays
are not
energized
are not
energized
are not
energized
0
0
-2
15
10
5
15
10
5
A, C
A, C
A, C
Drop-out voltage
Drop-out voltage
Drop-out voltage
relays
are
relays
are
relays
are
-4
energized
energized
energized
-6
-8
-10
0
5
10
0
5
10
1
2
3
4
5
6
Inter-relay distance ( ), mm
Inter-relay distance ( ), mm
Inter-relay distance ( ), mm
DIMENSIONS(mm inch)
Download CADData from our Web site.
1. 1 Form A type
Single side stable
2 coil latching
External dimensions
2 coil latching
4-1.2 dia.
6-1.2 dia.
Single side stable
CAD Data
4-.047 dia.
6-.047 dia.
2.54
.100
2.54
.100
20.2
20.2
11.0
.433
.795
.795
10.0
10.5
10.0
.394
2.54
.100
2.54
.100
10.5
.413
.394
.413
Tolerance: 0.1 .004
Schematic (Bottom view)
0.3
1.0
1.0
0.3
0.3
3.5
3.5
.012
.039
.039
.012
.012
.138
.138
1.0
0.8
0.8
0.8
.031
0.8
.031
.039
.031
.031
1.21
1.21
Single side stable
2 coil latching
7.2
7.2
7.62
.300
.048
.048
.283
.283
16
15 16
2.54
.100
10.16
7.62
.300
7.62
.300
7.62
-
-
-
.400
.300
General tolerance: 0.3 .012
PC board pattern (Bottom view)
+
1
+
2
+
1
8
5
8
5
(Deenergized condition)
(Reset condition)
2. 1 Form A 1 Form B type
Single side stable
2 coil latching
External dimensions
6-1.2 dia.
8-1.2 dia.
Single side stable
2 coil latching
CAD Data
6-.047 dia.
8-.047 dia.
20.2
20.2
11.0
.433
2.54×3
2.54×3 2.54×3 2.54
.100×3 .100×3 .100
2.54×4
.795
.795
.100×3 .100×4
10.0
.394
10.0
.394
2.54×3
.100×3
2.54×3
.100×3
10.5
.413
10.5
.413
Tolerance: 0.1 .004
Schematic (Bottom view)
0.3
1.0
1.0
0.3
0.3
3.5
3.5
.012
.039
.039
.012
.012
.138
.138
1.0
.039
0.8
0.8
0.8
.031
0.8
.031
.031
.031
1.21
1.21
7.2
7.2
7.62
.300
.048
.048
Single side stable
2 coil latching
.283
.283
2.54
.100
16
15 16
10.16
7.62
7.62
.300
7.62
9
12
9
12
.400
.300
.300
-
-
-
General tolerance: 0.3 .012
+
1
+
2
+
1
PC board pattern (Bottom view)
8
5
8
5
(Deenergized condition)
(Reset condition)
ds_61A05_en_dsp: 070313D
5
DSP
3. 2 Form A type
Single side stable
2 coil latching
External dimensions
2 coil latching
6-1.2 dia.
8-1.2 dia.
Single side stable
CAD Data
6-.047 dia.
8-.047 dia.
20.2
20.2
11.0
.433
2.54×3
2.54×3 2.54×3 2.54
.100×3 .100×3 .100
2.54×4
.795
.795
.100×3 .100×4
10.0
10.5
10.0
.394
2.54×3
.100×3
2.54×3
.100×3
10.5
.413
.394
.413
Tolerance: 0.1 .004
Schematic (Bottom view)
0.3
1.0
1.0
0.3
0.3
3.5
3.5
.012
.039
.039
.012
.012
.138
.138
1.0
.039
0.8
0.8
0.8
.031
0.8
.031
.031
.031
1.21
1.21
7.2
7.2
7.62
.300
.048
.048
Single side stable
2 coil latching
.283
.283
2.54
.100
16
15 16
10.16
7.62
.300
7.62
.300
7.62
9
12
9
12
.400
.300
-
-
-
General tolerance: 0.3 .012
+
1
+
2
+
1
PC board pattern (Bottom view)
8
5
8
5
(Deenergized condition)
(Reset condition)
SAFETY STANDARDS
UL/C-UL (Recognized)
Contact rating
CSA (Certified)
Contact rating
TÜV (Certified)
Item
File No.
E43028
File No.
File No.
Rating
8A 250V AC
LR26550
etc.
8A 250V AC
1/6HP 125, 250V AC
5A 30V DC
B 02 10
13461 238
8A 250V AC (cos=1.0)
5A 250V AC (cos=0.4)
5A 30V DC
1 Form A
1/6HP 125, 250V AC
5A 30V DC
E43028
E43028
5A 250V AC
LR26550
etc.
5A 250V AC
B 02 10
13461 238
5A 250V AC (cos=1.0)
3A 250V AC (cos=0.4)
5A 30V DC
1 Form A
1 Form B
1/6HP 125, 250V AC
5A 30V DC
1/6HP 125, 250V AC
5A 30V DC
5A 250V AC
1/10HP 125, 250V AC
5A 30V DC
LR26550
etc.
5A 250V AC
1/10HP 125, 250V AC
5A 30V DC
B 02 10
13461 238
5A 250V AC (cos=1.0)
3A 250V AC (cos=0.4)
5A 30V DC
2 Form A
* Remarks: The standard certified for may differ depending on where the product was manufactured.
NOTES
1. Soldering should be done under the
following conditions:
3. External magnetic field
5. When using, please be aware that
the a contact and b contact sides of 1
Form A and 1 Form B types may go on
simultaneously at operate time and
release time.
Since DY relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
field. Avoid using the relay under that
condition.
250C 482F within 10 s
300C 572F within 5 s
350C 662F within 3 s
2. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
ultrasonic cleaning which subjects the
relays to high frequency vibrations, which
may cause the contacts to stick.
It is recommended that a fluorinated
hydrocarbon or other alcoholic solvents
be used.
4. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different.
For Cautions for Use, see Relay Technical Information.
ds_61A05_en_dsp: 070313D
6
SOCKETS FOR
DS-P RELAYS
ACCESSORIES
TYPES AND APPLICABLE RELAYS
For DSP1a
For DSP1a, DSP1, DSP2a
Type No.
Applicable relays
DSP1a relays
DSP1a-PS
OK
DSP1a-PSL2
DSP2a-PS
OK
DSP2a-PSL2
OK
OK
OK
OK
OK
OK
OK
OK
DSP1a-L2 relays
DSP1 relays
OK
OK
DSP1-L2 relays
DSP2a relays
DSP2a-L2 relays
SPECIFICATIONS
Item
Specifications
3,000 Vrms between terminals
(Except for the portion between coil terminals)
Breakdown voltage
Insulation resistance
Heat resistance
1,000 M between terminals at 500 V
150C for 1 hour
Max. continuous current
8 A
DIMENSIONS (Unit: mm inch)
DSP1a-PS, DSP1a-PSL2
DSP2a-PS, DSP2a-PSL2
External dimensions
15
16
9
12
15
16
11 0.6
.433 .024
2.54
.100
2.54
.100
23 0.6
8
5
2
1
8
5
2
1
.906 .024
1.2 dia.
047 dia.
1.2 dia.
047 dia.
2.54
.100
2.54
.100
Terminal No.2 and 15 are for
DSP1a-PSL2 only.
Terminal No.2 and 15 are for
DSP2a-PSL2 only.
17 0.6
.669 .024
5.7 0.3
3.7
.224 .012 .146
0.8 0.1
0.65 0.1
.031 .004
2.54 0.3
.100 .012
0.3 0.1
.026 .004
.012 .004
7.62 0.3
2.61
.103
7.62 0.3 10.16 0.3
.300 .012 .400 .012
.300 .012
PC board pattern (Bottom view)
FIXING AND REMOVAL METHOD
1. Match the direction of relay and
socket.
3. Remove the relay, applying force in the
direction shown below.
4. In case there is not enough space for
finger to pick relay up, use screw drivers
in the way shown below.
2. Both ends of relays are fixed so tightly
that the socket hooks on the top surface
of relays.
Notes: 1. Exercise care when removing relays. If
greater than necessary force is applied at
the socket hooks, deformation may alter the
dimensions so that the hook will no longer
catch, and other damage may also occur.
2. It is hazardous to use IC chip sockets.
Good
No good
ds_61A05_en_dsp: 070313D
7
相关型号:
DSP1A-L-DC12V-R
Electromechanical Relay, SPST, Latched, 15.6VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output
PANASONIC
DSP1A-L-DC24V
Electromechanical Relay, SPST, Latched, 31.2VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output
PANASONIC
DSP1A-L-DC5V-R
Electromechanical Relay, SPST, Latched, 6.5VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output
PANASONIC
DSP1A-L-DC6V
Electromechanical Relay, SPST, Latched, 7.8VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output
PANASONIC
DSP1A-L-DC9V
Electromechanical Relay, SPST, Latched, 11.7VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output
PANASONIC
DSP1A-L2-DC12V-R
Electromechanical Relay, SPST, Latched, 15.6VDC (Coil), 5A (Contact), 125VDC (Contact), Random, AC/DC Output
PANASONIC
©2020 ICPDF网 联系我们和版权申明