AZH1203 [PANASONIC]
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Crossroller Plunger Actuator, Panel Mount, ROHS COMPLIANT;型号: | AZH1203 |
厂家: | PANASONIC |
描述: | Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Crossroller Plunger Actuator, Panel Mount, ROHS COMPLIANT 开关 光电二极管 |
文件: | 总15页 (文件大小:670K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HL (AZH)
Limit Switches
COMPACT SIZE
LIMIT SWITCHES
Compact, high-performance limit switch
with superior environmental resistance.
Broad lineup covers from die casting cases
to economical plastic cases.
Industrie
Prize awarded
Forum
Design
Hannover
FEATURES
1. Broad lineup
4. Lineup includes bifucated (twin
contact) type as well as standard load
type.
Lineup includes reduced-wiring connec-
tor type, die casting type with commonly-
used screw terminals, and a plastic case
type that puts a priority on economy.
2. Superior environmental resistance
The die-cast type has high sealing char-
acteristics that satisfy the IEC IP67.
3. Standardized connector type
We standardized the reduced-wiring and
easy-installation connector type. This
increases worker efficiency when wiring,
maintaining, and replacing.
The lineup includes a standard load type
(5 A, 250 VAC) and a bifucated type (0.1
A, 30 VDC). The bifucated type uses
gold-clad twin contacts, which makes it
ideal for electronic circuit control.
5. Economical plastic case type
A plastic case IP64 economy type is
included as well as the die-cast type. It is
perfect for applications in which econo-
my is the priority.
6. UL/CSA certified.
7. TÜV accredited products also avail-
able.
Compliance with RoHS Directive
PRODUCT TYPE
1. Limit Switches
Die casting case
Plastic case
Screw terminal type
Type
Screw terminal type
Connector type
Bifucated
Actuator
Standard Bifurcated
Standard
Bifurcated
Without LED
With LED
Push plunger
Roller plunger
Common to panel mount push plunger
Common to panel mount roller plunger
Common to panel mount cross roller plunger
AZH1001
AZH1002
AZH1003
AZH1031
AZH1032
AZH1033
AZH1011
AZH1012
AZH1013
AZH1041
AZH1021
AZH1044
AZH1024
AZH1066
AZH1201
AZH1202
AZH1203
AZH1231
AZH1232
AZH1233
AZH1211
AZH1212
AZH1213
AZH1241
AZH1221
AZH1244
AZH1224
AZH1266
Cross roller plunger
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
AZH2031
AZH2032
AZH2033
AZH2011
AZH2012
AZH2013
AZH2041
AZH2021
AZH2044
AZH2024
—
AZH2231
AZH2232
AZH2233
AZH2211
AZH2212
AZH2213
AZH2241
AZH2221
AZH2244
AZH2224
—
AZH2331
AZH2332
AZH2333
AZH2311
AZH2312
AZH2313
AZH2341
AZH2321
AZH2344
AZH2324
—
AZH233116
AZH233216
AZH233316
AZH231116
AZH231216
AZH231316
AZH234116
AZH232116
AZH234416
AZH232416
—
Roller lever
One-way short roller lever
One-way short lever
Flexible
Notes)
1. Lamp with LED is rated at 24 V DC.
Please inquire if you need a 12 V DC type.
2. When shipped, the cords are all placed for
extension from the right side. If you need
cords for the left side, please make the
change following the instructions on page 31.
Remarks
Notes) 1. For TÜV accredited products, please add "CE” at the end of the part number when ordering.
2. Cadmium free contact types are available on a custom-made basis. Please add an “F” to the end of the part number when ordering.
2. Accessories
Specifications
Product
Application
Part No.
Pin arrangement
AC
Type
Core No.
Color of wire
Conductor
0.5 mm2
(Circum-
ference: 6.5 dia.)
Length of cable
Brown
White
Blue
Straight
AZH28113
AZH28133
Cable connector
cord
3 m
9.843 ft
All connector
type
4
Angle
Black
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
FOREIGN STANDARDS
Standard
Applicable product
Part No.
File no.:
Ratings:
E122222
Standard: 5 A, 250 VAC (105 cycles), Pilot Duty B300
Bifurcated: 0.1 A, 30 VDC
UL
Certified products: All models
Order using the standard
part number.
File no.:
Ratings:
LR55880
Standard: 5 A, 250 VAC, Pilot Duty B300
Bifurcated: 0.1 A, 30 VDC
CSA
Certified products: All models
File no.:
Plastic case type
J9650515
Die-cast case type J9650514
...
Ratings:
Standard for plastic case type: AC–15 2A/250V~, DC–12 1A/30V
Place a CE at the end of the
part number when ordering.
...
TÜV
Bifurcated for plastic case type: DC–12 0.1A/30V
...
Standard for die-cast case type: DC–12 1A/30V
...
Bifurcated for die-cast case type: DC–12 0.1A/30V
Certified products: All models except those with LED lamps
SPECIFICATIONS
1. Ratings
Load
Standard type
Inductive
Bifurcated type
Motor
Without LED
With LED
Rated
Resistive
Lamp
control voltage
125 V AC
250 V AC
8 V DC
N.C.
2 A
1 A
—
—
—
—
—
—
N.O.
1 A
0.5 A
—
—
—
—
—
—
Resistive
5 A
5 A
5 A
5 A
—
5 A
0.5 A
0.25 A
1.5 A
1.5 A
—
—
—
—
—
—
3 A
3 A
0.1 A
—
—
—
—
1.5 A
1.5 A
—
1.5 A
0.05 A
0.03 A
0.1 A
0.1 A
—
0.1 A
—
14 V DC
24 V DC
30 V DC
125 V DC
250 V DC
—
0.1 A
—
—
—
—
Notes) 1. The values above indicate steady-state current.
2. Parameter of inductive load: AC power factor: Min. 0.4; DC time constant: Max. 7 ms.
3. Lamp load generates 10 times of inrush current.
4. Motor load generates 6 times of inrush current.
2. Characteristics
Type
Bifurcated type
Standard type
Item
Screw terminal type
Connector type
Contact arrangement
Contact resistance
Contact material
Insulation resistance
1 Form C
Initial: Max. 15 mΩ
AgCdO
1 Form C (Bifurcated contact)
Initial: Max. 100 mΩ
Initial: Max. 150 mΩ
Au clad Ag alloy (Cadmium free)
Initial: Min. 100MΩ (at 500 V DC)
1,000 Vrms for 1 min. between non-consecutive terminals
1,500 Vrms for 1 min. between dead metal parts and terminals
1,500 Vrms for 1 min. between ground and terminals
Initial breakdown voltage
Max. 98 m/s2 {10 G}
Max. 294 m/s2 {30 G}
Free position
Full operating position
Shock
resistance
Vibration resistance
Mechanical life
Electrical life
10 to 55 Hz (Double amplitude for max. 1.5 mm)
107 (at 120 cpm)
5 × 105 (at 20 cpm, 5 A 250 V AC resistive load)
5 × 105 (at 20 cpm, 0.1 A 125 V AC resistive load)
Ambient temperature
Ambient humidity
Max. switching frequency
–10 to +80°C +14 to +176°F
Max. 95% R.H.
Max. 120 cpm
3. Performance data for EN60947-5-1
Plastic case
Standard
Plastic case
Die casting case
Standard
Die casting case
Bifurcated
Item
Bifurcated
250V AC
2.5kV
Rated insulated voltage
250V AC
2.5kV
30V DC
1.5kV
0.8kV
5A
30V DC
1.5kV
0.8kV
1A
Impulse withstand voltage
Switching excess voltage
Rated closed thermocurrent
Conditional short-circuit current
Short-circuit protection
2.5kV
0.8kV
5A
1A
100A
100A
100A
100A
10A Fuse
10A Fuse
10A Fuse
10A Fuse
IP64 (switch)
IP54 (terminal)
IP64 (switch)
IP54 (terminal)
Protective construction
Degree of contamination
IP67
3
IP67
3
3
3
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
4. Operating characteristics
• Die casting case
Operating
force, max.
N (gf)
Movement dif-
ferential, max.
mm (inch)
Characteristics
Actuator
Release force, Pretravel, max.
Overtravel, min.
mm (inch)
Operating position,
max. mm (inch)
min. N (gf)
mm (inch)
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
Roller lever
One-way short roller lever
One-way short lever
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
3.92 (400)
2.45 (250)
3.92 (400)
2.45 (250)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
0.78 (80)
0.39 (40)
0.78 (80)
0.39 (40)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
2.0 (.079)
4.0 (.157)
2.0 (.079)
4.0 (.157)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.3 (.012)
0.6 (.024)
0.3 (.012)
0.6 (.024)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
4.0 (.157)
7.0 (.276)
4.0 (.157)
7.0 (.276)
17.4 0.8 (.685 .031)
23.4 0.8 (.921 .031)
23.4 0.8 (.921 .031)
30.0 0.8 (1.181 .031)
41.3 0.8 (1.626 .031)
41.3 0.8 (1.626 .031)
23.1 0.8 (.909 .031)
23.1 0.8 (.909 .031)
34.3 0.8 (1.350 .031)
34.3 0.8 (1.350 .031)
• Plastic case
Characteristics
Actuator
Operating
force, max.
N (gf)
Movement dif-
ferential, max.
mm (inch)
Release force, Pretravel, max.
Overtravel, min.
mm (inch)
Operating position,
max. mm (inch)
min. N (gf)
mm (inch)
Push plunger
Roller plunger
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
3.92 (400)
2.45 (250)
3.92 (400)
2.45 (250)
0.88 (90)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.78 (80)
0.39 (40)
0.78 (80)
0.39 (40)
—
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
2.0 (.079)
4.0 (.157)
2.0 (.079)
4.0 (.157)
30.0 (1.181)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.3 (.012)
0.6 (.024)
0.3 (.012)
0.6 (.024)
—
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
4.0 (.157)
7.0 (.276)
4.0 (.157)
7.0 (.276)
20.0 (.787)0
25.4 0.8 (1.000 .031)
31.4 0.8 (1.236 .031)
31.4 0.8 (1.236 .031)
17.4 0.8 (.685 .031)
23.4 0.8 (.921 .031)
23.4 0.8 (.921 .031)
30.0 0.8 (1.181 .031)
41.3 0.8 (1.626 .031)
41.3 0.8 (1.626 .031)
23.1 0.8 (.909 .031)
23.1 0.8 (.909 .031)
34.3 0.8 (1.350 .031)
34.3 0.8 (1.350 .031)
—
Cross roller plunger
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
Roller lever
One-way short roller lever
One-way short lever
Flexible
5. Protective characteristics
6. LED rating
Protective construction
Rating
24 V DC
Leakage current
1.5 mA
Internal resistance
Die cast case
Plastic case
18 kΩ
IEC
IP64
IP67
❍
❍
The leakage current changes depends on the resistance of load connected
in parallel.
❍
—
OUTPUT CIRCUIT
With LED type
N.C.
N.O.
N.C.
N.O.
COM
LED
resistance
Note: Since LED is connected to N.O. side,
COM
the polarity of the load shall be + for N.O.
CONTACTS
Screw terminal type
Plunger type
Connector type
Lever type
1
4
2
3
Color of lead-
Contact No.
Terminals
wire
Brown
White
Blue
1
2
3
4
—
The terminal cover
can be mounted in
both directions.
The terminal cover
can be mounted in
both directions.
N.C.
COM
N.O.
COM
N.C.
COM
N.O.
N.O.
N.C.
Black
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
mm inch General tolerance: 0.4 .016
DIMENSIONS
44.5 1.752
33 0.15
Die cast case
Pretravel
1.5 max.
.059
1. Screw terminal type
Panel mount push plunger
1.299 .006
10
8 dia.
.315
.394
M14 (P = 1) threaded
Stainless steel
2-panel mounting nut
Appropriate total-travel range
Thickness 3 .118
Operating position
17.4 0.8
.685 .031
Length of opposite side 17 .669
4.7
.185
0.5
.020
Operating force, max.
11.8 (1200)
10
+0.2
4.2
.394
+0
N (gf)
+.008
.165
+0
8
.315
Release force, min.
N (gf)
4.90 (500)
+0.2
4.5
.177
4.2
dia.
dia.
+0
Pretravel, max.
mm (inch)
+.008
1.5 (.059)
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
0.1 (.004)
Overtravel, min.
mm (inch)
3.0 (.118)
56
2.205
18
.709
AZH2031
AZH2231
Operating position,
mm (inch)
17.4 0.8
(.685 .031)
Panel mount roller plunger
44.5 1.752
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
1.5 max.
.059
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Operating position
23.4 0.8
Length of opposite side 17 .669
17
.921 .031
4.7
.669
Operating force, max.
N (gf)
.185
10
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
0.5
.020
4.2
.394
+0
+.008
+0
.165
Release force, min.
N (gf)
8
.315
+0.2
+0
4.5
.177
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2032
AZH2232
Operating position,
mm (inch)
23.4 0.8
(.909 .031)
Panel mount cross roller plunger
44.5 1.752
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
10
.394
Stainless steel roller
Appropriate total-travel range
M14 (P = 1) threaded
Operating position
23.4 0.8
2-panel mounting nut
Thickness 3 .118
17
.921 .031
Length of opposite side 17 .669
4.7
Operating force, max.
N (gf)
.669
.185
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
10
+0.2
0.5
.020
4.2
.394
+0
+.008
Release force, min.
N (gf)
.165
+0
8
.315
+0.2
+0
Pretravel, max.
mm (inch)
4.5
.177
4.2
dia.
dia.
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2033
AZH2233
Operating position,
mm (inch)
23.4 0.8
(.909 .031)
Sealed push plunger
44.5 1.752
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
8 dia.
.315
10
.394
Stainless steel
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
30.0 0.8
Operating force, max.
N (gf)
.185
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
+0
0.5
.020
1.181 .031
4.2
+.008
+0
.165
Release force, min.
N (gf)
+0.2
4.5
.177
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2011
AZH2211
Operating position,
mm (inch)
30.0 0.8
(1.181 .031)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
Sealed roller plunger
mm inch General tolerance: 0.4 .016
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
1.299 .006
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
Operating force, max.
11.8 (1200)
4.7
Operating position
41.3 0.8
1.626 .031
.185
N (gf)
+0.2
+0
0.5
.020
4.2
Release force, min.
+.008
+0
4.90 (500)
.165
N (gf)
Pretravel, max.
mm (inch)
+0.2
+0
1.5 (.059)
4.5
.177
4.2
dia.
dia.
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
0.1 (.004)
28.4
1.118
Overtravel, min.
mm (inch)
3.0 (.118)
AZH2012
AZH2212
56
2.205
18
.709
Operating position,
mm (inch)
41.3 0.8
(1.626 .031)
Sealed cross roller plunger
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
1.299 .006
10
Stainless steel roller
.394
Sealed rubber
(Oil-tight synthetic rubber)
Operating force, max.
N (gf)
4.7
Operating position
41.3 0.8
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
.185
+0.2
0.5
.020
1.626 .031
4.2
+0
Release force, min.
N (gf)
+.008
+0
.165
Pretravel, max.
mm (inch)
+0.2
4.5
.177
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
AZH2013
AZH2213
56
2.205
18
.709
Operating position,
mm (inch)
41.3 0.8
(1.626 .031)
Short roller lever
44.5 1.752
33 0.15
10.5 .413 dia. × width 4 .157
1.299 .006
R24.4
R.961
Stainless steel roller
Pretravel
2.0 max.
.079
17.4
.685
4.7
.185
0.5
.020
19
.748
10
.394
Operating
position
Operating force, max.
N (gf)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
23.1 0.8
.909 .031
13
.512
10.5
.413
4.5
.177
Release force, min.
N (gf)
+0.2
+0
4.2
+.008
+0.2
.165
+0
4.2
dia.
dia.
+0
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2041
AZH2241
Operating position,
mm (inch)
23.1 0.8
(.909 .031)
Roller lever
44.5 1.752
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
4.0 max.
.157
17.4
.685
4.7
.185
19
.748
R43.9
0.5
.020
R1.728
10
.394
Operating
Operating force, max.
N (gf)
position
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
23.1 0.8
.909 .031
13
10.5
4.5
.512
+0.2
+0
Release force, min.
N (gf)
.413
4.2
.177
+.008
+0.2
.165
+0
4.2
dia.
dia.
+0
+.008
Pretravel, max.
mm (inch)
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
56
2.205
18
.709
AZH2021
AZH2221
Operating position,
mm (inch)
23.1 0.8
(.909 .031)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
mm inch General tolerance: 0.4 .016
One-way short roller lever
10.5 .413 dia. × width 4 .157
Stainless steel roller
R29.8
R1.173
Pretravel
2.0 max.
17.4
.685
33 0.15
1.299 .006
.079
4.7
.185
19
.748
Operating
Operating force, max.
3.92 (400)
10
.394
position
0.5
.020
N (gf)
34.3 0.8
1.350 .031
Release force, min.
N (gf)
13
0.78 (80)
10.5
.413
4.5
.512
+0.2
+0
4.2
.177
Pretravel, max.
mm (inch)
+.008
+0.2
2.0 (.079)
.165
+0
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
0.3 (.012)
28.4
1.118
Overtravel, min.
mm (inch)
4.0 (.157)
AZH2044
AZH2244
44.5 1.752
56 2.205
18
.709
Operating position,
mm (inch)
34.3 0.8
(1.350 .031)
One-way roller lever
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
4.0 max.
.157
17.4
.685
33 0.15
1.299 .006
R47.1
R1.854
19
.748
10
.394
4.7
.185
Operating
position
0.5
.020
Operating force, max.
N (gf)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
34.3 0.8
1.350 .031
13
.512
Release force, min.
N (gf)
10.5
.413
4.5
.177
+0.2
4.2
+0
+.008
+0.2
.165
Pretravel, max.
mm (inch)
+0
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
44.5 1.752
56 2.205
18
.709
AZH2024
AZH2224
Operating position,
mm (inch)
34.3 0.8
(1.350 .031)
2. Connector type
Panel mount push plunger
44.5 1.752
33 0.15
1.299 .006
Pretravel
1.5 max.
10
.394
8 dia.
.315
M14 (P = 1) threaded
Stainless steel
.059
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
Appropriate total-travel range
Operating position
17.4 0.8
.685 .031
4.7
.185
Operating force, max.
N (gf)
10
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
0.5
.020
4.2
.394
+0
+.008
+0
.165
8
.315
Release force, min.
N (gf)
+0.2
4.5
4.2
dia.
+0
Pretravel, max.
mm (inch)
20.4
.803
+.008
.177
LED
.165
dia.
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
M12×1
AZH2331
Operating position,
mm (inch)
17.4 0.8
(.685 .031)
AZH233116 LED type on the photo
Panel mount roller plunger
44.5 1.752
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
1.5 max.
.059
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Operating position
23.4 0.8
Length of opposite side 17 .669
17
.669
.921 .031
4.7
.185
Operating force, max.
N (gf)
10
.394
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
0.5
.020
4.2
+0
+.008
.165
+0
Release force, min.
N (gf)
8
.315
+0.2
+0
4.5
.177
4.2
dia.
dia.
Pretravel, max.
mm (inch)
20.4
.803
+.008
.165
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2332
AZH233216 LED type on the photo
Operating position,
mm (inch)
23.4 0.8
(.909 .031)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
Panel mount cross roller plunger
mm inch General tolerance: 0.4 .016
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
1.299 .006
10
.394
Stainless steel roller
Appropriate
total-travel range
M14 (P = 1) threaded
Operating position
23.4 0.8
2-panel mounting nut
Thickness 3 .118
17
.921 .031
Length of opposite side 17 .669
4.7
Operating force, max.
11.8 (1200)
.669
.185
10
N (gf)
+0.2
0.5
.020
4.2
.394
+0
+.008
Release force, min.
N (gf)
.165
+0
8
.315
4.90 (500)
+0.2
+0
Pretravel, max.
mm (inch)
4.5
.177
4.2
dia.
dia.
1.5 (.059)
20.4
.803
+.008
.165
+0
Movement differential,
max. mm (inch)
28.4
0.1 (.004)
15 dia.
1.118
.591 dia.
Overtravel, min.
mm (inch)
3.0 (.118)
57.6
2.268
18
.709
LED
M12×1
AZH2333
Operating position,
mm (inch)
23.4 0.8
(.921 .031)
AZH233316 LED type on the photo
Sealed push plunger
44.5 1.752
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
8 dia.
.315
10
.394
Stainless steel
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
30.0 0.8
.185
Operating force, max.
N (gf)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
+0
0.5
.020
1.181 .031
4.2
+.008
+0
.165
Release force, min.
N (gf)
+0.2
4.5
.177
4.2
dia.
+0
Pretravel, max.
mm (inch)
20.4
.803
+.008
.165
dia.
+0
28.4
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
1.118
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2311
Operating position,
mm (inch)
30.0 0.8
(1.181 .031)
AZH231116 LED type on the photo
Sealed roller plunger
Pretravel
44.5 1.752
33 0.15
10.5 .413 dia. × width 4 .157
1.5 max.
Stainless steel roller
1.299 .006
10
.059
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating force, max.
N (gf)
Operating position
41.3 0.8
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
.185
+0.2
0.5
.020
1.626 .031
4.2
+0
Release force, min.
N (gf)
+.008
+0
.165
Pretravel, max.
mm (inch)
+0.2
4.5
.177
4.2
dia.
dia.
+0
20.4
.803
+.008
.165
+0
Movement differential,
max. mm (inch)
28.4
1.118
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
AZH2312
LED
M12×1
Operating position,
mm (inch)
41.3 0.8
(1.626 .031)
AZH231216 LED type on the photo
Sealed cross roller plunger
44.5 1.752
33 0.15
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
1.299 .006
10
Stainless steel roller
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating force, max.
N (gf)
Operating position
41.3 0.8
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
.185
+0.2
0.5
.020
1.626 .031
4.2
+0
+.008
+0
Release force, min.
N (gf)
.165
Pretravel, max.
mm (inch)
+0.2
4.5
.177
4.2
dia.
dia.
+0
20.4
.803
+.008
.165
+0
Movement differential,
max. mm (inch)
28.4
1.118
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2313
AZH231316 LED type on the photo
Operating position,
mm (inch)
41.3 0.8
(1.626 .031)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
mm inch General tolerance: 0.4 .016
Short roller lever
44.5 1.752
33 0.15
10.5 .413 dia. × width 4 .157
1.299 .006
R24.4
R.961
Stainless steel roller
Pretravel
2.0 max.
.079
17.4
.685
4.7
.185
0.5
.020
19
.748
10
.394
Operating
Operating force, max.
3.92 (400)
position
N (gf)
23.1 0.8
.909 .031
13
.512
10.5
.413
4.5
.177
Release force, min.
N (gf)
+0.2
4.2
0.78 (80)
+0
+.008
+0.2
.165
+0
4.2
dia.
dia.
+0
20.4
.803
Pretravel, max.
mm (inch)
+.008
.165
+0
2.0 (.079)
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
0.3 (.012)
Overtravel, min.
mm (inch)
4.0 (.157)
57.6
2.268
18
.709
LED
M12×1
AZH2341
AZH234116 LED type on the photo
Operating position,
mm (inch)
23.1 0.8
(.909 .031)
Roller lever
44.5 1.752
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
17.4
.685
4.0 max.
.157
4.7
.185
19
.748
R43.9
0.5
.020
R1.728
10
.394
Operating
Operating force, max.
N (gf)
position
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
23.1 0.8
.909 .031
13
10.5
.413
4.5
.512
+0.2
Release force, min.
N (gf)
4.2
.177
+0
+.008
+0.2
.165
+0
4.2
dia.
dia.
+0
+.008
Pretravel, max.
mm (inch)
.165
20.4
.803
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
57.6
2.268
18
.709
LED
M12×1
AZH2321
AZH232116 LED type on the photo
Operating position,
mm (inch)
23.1 0.8
(.909 .031)
One-way short roller lever
10.5 .413 dia. × width 4 .157
Stainless steel roller
R29.8
R1.173
Pretravel
2.0 max.
.079
17.4
.685
33 0.15
1.299 .006
4.7
.185
19
.748
Operating
10
.394
position
0.5
.020
Operating force, max.
N (gf)
34.3 0.8
1.350 .031
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
13
10.5
Release force, min.
N (gf)
4.5
.512
+0.2
+0
.413
4.2
.177
+.008
+0.2
.165
+0
4.2
dia.
dia.
+0
Pretravel, max.
mm (inch)
20.4
.803
+.008
.165
+0
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
44.5 1.752
57.6 2.268
18
.709
LED
M12×1
AZH2344
Operating position,
mm (inch)
34.3 0.8
(1.350 .031)
AZH234416 LED type on the photo
One-way roller lever
10.5 .413 dia. × width 4 .157
Stainless steel roller
Pretravel
4.0 max.
.157
17.4
.685
33 0.15
1.299 .006
R47.1
19
R1.854
.748
4.7
.185
Operating
10
.394
position
34.3 0.8
1.350 .031
0.5
.020
Operating force, max.
N (gf)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
13
10.5
Release force, min.
N (gf)
4.5
.512
+0.2
+0
.413
4.2
.177
+.008
+0.2
.165
+0
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+0
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
15 dia.
.591 dia.
Overtravel, min.
mm (inch)
44.5 1.752
57.6 2.268
18
.709
LED
M12×1
AZH2324
AZH232416 LED type on the photo
Operating position,
mm (inch)
34.3 0.8
(1.350 .031)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
mm inch General tolerance: 0.4 .016
Plastic case
Push plunger
16 dia.
.630
45 1.772
8 dia.
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10
.394
.315
Appropriate total-travel range
4.7
Operating position
25.4 0.8
.185
Operating force, max.
5.88 (600)
10
+0.2
+0
1.000 .031
0.5
.020
4.2
.394
N (gf)
+.008
+0
.165
8
Release force, min.
0.98 (100)
.315
4.5
.177
N (gf)
+0.2
4.2
dia.
dia.
+0
Pretravel, max.
mm (inch)
+.008
.165
+0
1.5 (.059)
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
0.1 (.004)
Overtravel, min.
mm (inch)
3.0 (.118)
(58.9)
(2.319)
18
.709
AZH1001
AZH1201
Operating position,
mm (inch)
25.4 0.8
(1.000 .031)
Roller plunger
45 1.772
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
16 dia.
.630
Pretravel
1.5 max.
.059
Stainless steel roller
10
.394
Appropriate total-travel range
Operating position
31.4 0.8
4.7
1.236 .031
17
.669
.394
.185
Operating force, max.
N (gf)
10
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
0.5
.020
4.2
+0
+.008
+0
.165
8
Release force, min.
N (gf)
.315
4.5
.177
+0.2
+0
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
(58.9)
18
.709
(2.319)
AZH1002
AZH1202
Operating position,
mm (inch)
31.4 0.8
(1.236 .031)
Cross roller plunger
45 1.772
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
16 dia.
.630
Pretravel
1.5 max.
.059
Stainless steel roller
10
.394
Appropriate total-travel range
Operating position
31.4 0.8
4.7
1.236 .031
17
.669
.394
Operating force, max.
N (gf)
.185
10
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
+0
0.5
.020
4.2
+.008
.165
+0
Release force, min.
N (gf)
8
.315
4.5
.177
+0.2
+0
4.2
dia.
dia.
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
(58.9)
18
.709
(2.319)
AZH1003
AZH1203
Operating position,
mm (inch)
31.4 0.8
(1.236 .031)
Panel mount push plunger
45 1.772
8 dia.
.315
33 0.15
Pretravel
1.5 max.
.059
1.299 .006
10
.394
M14 (P = 1) threaded
Appropriate total-travel range
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
4.7
.185
0.5
.020
Operating position
17.4 0.8
.685 .031
10
Operating force, max.
N (gf)
+0.2
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
4.2
+0
.394
+.008
+0
.165
8
.315
Release force, min.
N (gf)
+0.2
4.5
.177
4.2
dia.
+0
+.008
Pretravel, max.
mm (inch)
.165
dia.
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
(58.9)
(2.319)
18
.709
AZH1031
AZH1231
Operating position,
mm (inch)
17.4 0.8
(.685 .031)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
mm inch General tolerance: 0.4 .016
Panel mount roller plunger
45 1.772
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Pretravel
1.5 max.
.059
Stainless steel roller
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Operating position
23.4 0.8
Length of opposite side 17 .669
4.7
.921 .031
17
.669
Operating force, max.
5.88 (600)
.185
10
+0.2
N (gf)
0.5
.020
4.2
+0
.394
+.008
+0
.165
Release force, min.
N (gf)
8
.315
0.98 (100)
+0.2
+0
4.5
.177
4.2
dia.
dia.
Pretravel, max.
mm (inch)
1.5 (.059)
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
0.1 (.004)
1.118
Overtravel, min.
mm (inch)
3.0 (.118)
(58.9)
(2.319)
18
.709
AZH1032
AZH1232
Operating position,
mm (inch)
23.4 0.8
(.921 .031)
Panel mount cross roller plunger
45 1.772
33 0.15
1.299 .006
10.5 .413 dia. × width 4 .157
Pretravel
1.5 max.
.059
Stainless steel roller
10
.394
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Operating position
23.4 0.8
Length of opposite side 17 .669
4.7
.921 .031
Operating force, max.
N (gf)
17
.669
.185
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
10
+0.2
0.5
.020
4.2
+0
.394
+.008
+0
Release force, min.
N (gf)
.165
8
.315
+0.2
+0
4.5
.177
Pretravel, max.
mm (inch)
4.2
dia.
dia.
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
(58.9)
(2.319)
18
.709
AZH1033
AZH1233
Operating position,
mm (inch)
23.4 0.8
(.921 .031)
Sealed push plunger
45 1.772
33 0.15
1.299 .006
8 dia.
.315
Pretravel
1.5 max.
.059
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating position
30 0.8
.185
Operating force, max.
N (gf)
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
+0.2
1.181 .031
0.5
.020
4.2
+0
+.008
+0
.165
Release force, min.
N (gf)
+0.2
4.5
.177
4.2
dia.
dia.
+0
Pretravel, max.
mm (inch)
+.008
.165
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
(58.9)
(2.319)
18
.709
AZH1011
AZH1211
Operating position,
mm (inch)
30.0 0.8
(1.181 .031)
Sealed roller plunger
45 1.772
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating force, max.
N (gf)
Operating position
41.3 0.8
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
.185
+0.2
1.626 .031
0.5
.020
4.2
+0
Release force, min.
N (gf)
+.008
+0
.165
Pretravel, max.
mm (inch)
+0.2
4.5
.177
4.2
dia.
dia.
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
(58.9)
(2.319)
18
.709
AZH1012
AZH1212
Operating position,
mm (inch)
41.3 0.8
(1.626 .031)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
Sealed cross roller plunger
mm inch General tolerance: 0.4 .016
45 1.772
33 0.15
1.299 .006
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
10
.394
Sealed rubber
(Oil-tight synthetic rubber)
4.7
Operating force, max.
5.88 (600)
Operating position
41.3 0.8
1.626 .031
.185
N (gf)
+0.2
0.5
.020
4.2
+0
Release force, min.
+.008
+0
.165
0.98 (100)
N (gf)
Pretravel, max.
mm (inch)
+0.2
4.5
.177
4.2
dia.
dia.
1.5 (.059)
+0
+.008
.165
+0
20.4
.803
Movement differential,
max. mm (inch)
0.1 (.004)
28.4
1.118
Overtravel, min.
mm (inch)
3.0 (.118)
(58.9)
(2.319)
18
.709
AZH1013
AZH1213
Operating position,
mm (inch)
41.3 0.8
(1.626 .031)
Short roller lever
10.5 .413 dia. × width 4 .157
33 0.15
Nylon roller
R24.4
R.961
Pretravel
2.0 max.
.079
17.4
.685
1.299 .006
4.7
.185
19
.748
10
.394
0.5
.020
Operating
position
23.1 0.8
.909 .031
Operating force, max.
N (gf)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
14.6
10.5
.413
.575
4.5
+0.2
+0
4.2
Release force, min.
N (gf)
.177
+.008
+0.2
.165
+0
4.2
.165
dia.
dia.
+0
+.008
Pretravel, max.
mm (inch)
+0
20.4
.803
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
18
.709
45 1.772
58.9 2.319
AZH1041
AZH1241
Operating position,
mm (inch)
23.1 0.8
(.909 .031)
Roller lever
10.5 .413 dia. × width 4 .157
33 0.15
Nylon roller
Pretravel
17.4
.685
1.299 .006
4.0 max.
.157
19
4.7
R43.9
.748
.185
R1.728
10
.394
0.5
.020
Operating
position
Operating force, max.
N (gf)
23.1 0.8
.909 .031
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
14.6
.575
10.5
.413
4.5
+0.2
+0
4.2
.177
Release force, min.
N (gf)
+.008
+0.2
.165
+0
4.2
.165
dia.
dia.
+0
+.008
+0
20.4
.803
Pretravel, max.
mm (inch)
28.4
1.118
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
18
.709
45 1.772
58.9 2.319
AZH1021
AZH1221
Operating position,
mm (inch)
23.1 0.8
(.909 .031)
One-way short roller lever
10.5 .413 dia. × width 4 .157
Nylon roller
Pretravel
2.0 max.
17.4
.685
R29.8
R1.173
.079
33 0.15
1.299 .006
19
.748
4.7
.185
Operating
10
.394
0.5
.020
position
Operating force, max.
N (gf)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
34.3 0.8
1.350 .031
14.6
.575
Release force, min.
N (gf)
10.5
.413
4.5
+0.2
4.2
+0
.177
+.008
+0.2
.165
Pretravel, max.
mm (inch)
+0
4.2
.165
dia.
dia.
+0
+.008
+0
20.4
.803
Movement differential,
max. mm (inch)
28.4
1.118
Overtravel, min.
mm (inch)
18
.709
45 1.772
58.9 2.319
AZH1044
AZH1244
Operating position,
mm (inch)
34.3 0.8
(1.350 .031)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
mm inch General tolerance: 0.4 .016
One-way roller lever
10.5 .413 dia. × width 4 .157
Nylon roller
Pretravel
4.0 max.
.157
17.4
.685
33 0.15
1.299 .006
R47.1
R1.854
19
.748
4.7
.185
Operating
Operating force, max.
2.45 (250)
10
.394
position
0.5
.020
N (gf)
34.3 0.8
1.350 .031
Release force, min.
N (gf)
14.6
.575
0.39 (40)
10.5
.413
4.5
+0.2
+0
4.2
.177
Pretravel, max.
mm (inch)
+.008
+0.2
4.0 (.157)
.165
+0
4.2
.165
dia.
dia.
+0
+.008
+0
20.4
.803
Movement differential,
max. mm (inch)
0.6 (.024)
28.4
1.118
Overtravel, min.
7.0 (.276)
mm (inch)
AZH1024
AZH1224
18
.709
Operating position,
mm (inch)
34.3 0.8
(1.350 .031)
45 1.772
58.9 2.319
Flexible
45 1.772
33 0.15
1.299 .006
3 dia.
.118 dia.
41.5
1.634
104.2 1.5
4.102 .059
4.7
.185
0.5
18.2
.717
+0.2
4.2
+0
.020
+.008
+0
.165
4.5
Operating force, max.
N (gf)
.177
0.88 (90)
30.0 (1.181)
20.0 (.787)
+0.2
4.2
dia.
dia.
+0
20.4
.803
Pretravel, min.
mm (inch)
+.008
.165
+0
28.4
1.118
AZH1066
AZH1266
Overtravel, max.
mm (inch)
18
.709
(58.9)
(2.319)
Cable connected cord
Straight type
(15)
(.591)
6.5 dia.
.256 dia.
14 dia.
.551 dia.
37.5
1.476
M12×1
3000
118.11
(35)
(1.378)
(4)
(.157)
AC type
AZH28113
Angle type
M12×1
14 dia.
.551 dia.
(15)
(.591)
6.5 dia.
.256 dia.
28.7
1.130
30.4
1.197
3000
118.11
(35)
(1.378)
(4)
(.157)
AC type
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AZH28133
HL (AZH)
MOUNTING METHOD
Side mounting
Panel mounting
1. Die casting case
2. Plastic case
(Panel plunger type)
M4 screw is used for mounting on side.
Mount it firmly with washer. Mounting
torque is 1.37 to 1.57 N·m {14 to 16
kg·cm}.
M4 screw is used for mounting on side.
Mount it firmly with washer. Mounting
torque is 1.18 to 1.47 N·m {12 to 15
kg·cm}.
When the panel mounting type is fixed
on the panel, the torque of hexagonal nut
is set under 7.84 N·m {80 kg·cm}.
Remove the hexagonal nut when plunger
type is used in side mounting.
Side mounting hole dimensions
Side mounting hole dimensions
Panel mounting hole dimensions
33 0.15
1.299 .006
33 0.15
1.299 .006
14.5 0.2 dia.
.571 .008 dia.
2-4.3 dia. or M4 screw hole
2-.169 dia.
2-4.3 dia. or M4 screw hole
2-.169 dia.
APPLICABLE WIRE
WIRING (For screw terminal)
1) M3 small binding screw is used as a
terminal screw.
2) When wiring, don’t connect the lead
wire to the terminal directly. Fasten the
crimped terminals securely applying a
tightening torque of 0.20 to 0.29 N·m {2
to 3 kg·cm}. Avoid using solder when
wiring.
Plunger type
(For screw terminal)
Sealed rubber of the lead wire is applica-
ble for 6 dia. to 8 dia.
COM
N.O.
terminal
N.C.
terminal
Applicable wire
terminal
Electric
wire name
Finished
outside
diameter
Lever type
Wire
strand
Conductor
0.75 mm2
1.25 mm2
2.0 mm2
0.75 mm2
1.25 mm2
6.6 mm dia.
7.4 mm dia.
8.0 mm dia.
3) Refer to the following diagram for
power supply wiring.
2-wire
3-wire
Vinyl cab-
tyre cord
(VCTF)
COM
terminal
N.C.
terminal
N.O.
terminal
7.0 mm dia.
7.8 mm dia.
Approx. 45
Approx. 1.772
5) Mount the terminal case securely after
ensuring that the rubber seals are
attached at the proper positions. Do a
visual check to make sure that the retain-
er is properly inserted on the protrusion
of the case. When installing the terminal
case of the plastic case type, push the
terminal case until it clicks into place,
and make sure there is no play after-
wards.
Approx. 30
Approx. 1.181
Approx. 15
Approx. .591
(Unit: mm inch)
4) Take note the terminal arrangement is
different between plunger type and lever
type. (The arrangement of N.C. and N.O.
is reversed.)
CONNECTOR TYPE
1) The cord outlet direction is inter-
changeable. Refer to “HOW TO
CHANGE THE CORD OUTLET DIREC-
TION FOR CONNECTOR TYPE”.
2) Do not remove the connector over 50
times.
4) When the angle type of connector
cord is used, the cord outlet direction is
as follows.
Cord outlet direction (Right side)
3) Wiring diagram as shown below.
N.C.
Contact No. 2
N.O.
Contact No. 4
COM
Cord outlet direction (Left side)
Contact No. 3
Contact No. of connector
1
2
3
4
Note: Contact No. 1 is not in use.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
HOW TO CHANGE THE CORD OUTLET DIRECTION FOR CONNECTOR TYPE
The cord outlet direction is interchange-
able both right and left sides. The direc-
tion of connector cord is set to the right
when it is shipped. When it is used left
side direction, follow the next procedure.
Cord outlet direction (Right side)
Step 1
Step 2
Fitting metal
Cramp
Body
Terminal cover
Push down the fitting metal while pulling
it horizontal direction.
Turn the terminal cover at an angle of
180 degree. Follow the step 3.
• Do not pull the terminal cover.
• Do not rotate the terminal cover many
times.
• Do not loosen the terminal screw.
Be careful, because not doing so could
cause wire cutoff and contact failure.
Step 3
Cord outlet direction (Left side)
Step 4
Attention
Attention
Seal rubber
Press up the terminal cover.
• Do not put the lead wire between termi-
nal cover and body.
• Put the seal rubber at the right place.
Confirm the fitting metal is on tightly.
If it is loosen, it might be cause of the
trouble.
INDICATOR LIGHTING CIRCUIT
(Connector type only)
Circuit diagram
Switch
1) See the circuit diagram.
4) The LED is turned on when the switch
2) The LED only takes 24 DC V, but
please use a connector designed for AC.
3) Since the LED lamp is connected to
the N.O. side (contact No. 4), please
connect the load to contact No. 4. The
load side should be on the “+” power
supply side. Be careful, because the
LED will break if the connection is
reversed.
is at a free position. The LED is turned
off when the switch operates.
5) Applicable power source is 24 V DC.
Use it with care on leakage current. The
leakage current is approx. 1.5 mA at 24
V DC.
Contact No. 2
Load
Contact No. 4
+
−
LED
Resistance
Contact No. 3
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
HL (AZH)
CAUTIONS
Common for all types
1. There are limits to what type of environment can be tolerated.
This limit switch is designed under the premise that it will be used in a standard industrial device. Accordingly, there are limits as to
what can be tolerated if used outdoors or where water and oil, etc., may get on the device. The following table indicates how much
water and oil can be withstood (classification of protective structure).
Plastic case (AZH1*)
Die casting case (AZH2*)
Protective classification
Testing method
IP64
IP67
No harmful effect when sprayed with water for 10 minutes from
all angles.
Water does not enter product after immersion in water 1m deep
for 30 minutes.
Cannot be used outdoors or in a place where water and oil, etc., Cannot be used outdoors where it can be rained on directly and
will continually contact the device. cannot be used submersed in water or in oil, etc.
Limits on use
Note: Although, initially, the protective classification complies under the testing above, due consideration must be taken because great differences may result depending
on factors such as duration of operation, installation method, and environment.
2. The internal mechanism will break if the actuator is moved beyond its Total-travel (T.T.). Always use within the T.T.
Die casting case
1) Do not expose HL limit switch to hot
water (over 60°C 140°F) and in a water
vapor environment.
2) Avoid the place where organic sol-
vents, strong acid, strong alkali liquid
and vapor may attach to the products
directly. Prevent using the HL limit switch
in place where inflammable or corrosive
gas will be generated.
3) Do not change the operating position
by bending the actuator.
4) Use within an ambient temperature of
–10 to 80°C. (However, do not allow it to
freeze.)
5) If OT is too big, the life of limit switch
will be shortened by switching friction.
Use it with enough margin of OT. 70% of
OT standard value will be good.
6) Attach the terminal cover securely to
the body with the metal stop latch to the
projection of the body.
9) When used outdoors (in places where
there is exposure to direct sunlight or
rain such as in multistory car parks) or in
environments where ozone is generated,
the influence of these environments may
cause deterioration of the rubber materi-
al. Please consult us if you intend to use
a switch in environments such as these.
10) Avoid use in excessively dusty envi-
ronments where actuator operation
would be hindered.
7) Confirmation test in the actual applica-
tion is highly recommended.
8) Do not use the switch in a silicon
atmosphere. Care should be taken
where organic silicon rubber, adhesive,
seling material, oil, grease or lead wire
generates silicon.
Plastic case
1) Do not use in water or oil. Do not
place the switch where it is always
exposed to water or dust splash.
2) Do not expose HL limit switch to hot
water (over 60°C 140°F) and in a water
vapor environment.
3) Avoid the place where organic sol-
vents, strong acid, strong alkali liquid
and vapor may attach to the products
directly. Prevent using the HL limit switch
is place where inflammable or corrosive
gas will be generated.
6) If OT is too big, the life of limit switch
will be shortened switching friction. Use it
with enough margin of OT. 70% of OT
standard value will be good for use.
7) Attach the terminal cover securely to
the body to the extent you can identify
the clicking or locking sound.
in environments where ozone is generat-
ed, the influence of these environments
may cause deterioration of the rubber
material. Please consult us if you intend
to use a switch in environments such as
these.
11) Avoid use in excessively dusty envi-
ronments where actuator operation
would be hindered.
8) A confirmation test in the actual appli-
cation is highly recommended.
9) Do not use the switch in a silicon
atmosphere. Case should be taken
where organic silicon rubber, adhesive,
sealing material, oil, grease or lead wire
generates silicon.
4) Do not change the operating position
by bending the actuator.
5) Use within an ambient temperature of
–10 to 80°C. (However, do not allow it to
freeze.)
10) When used outdoors (in places
where there is exposure to direct sunlight
or rain such as in multistory car parks) or
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
相关型号:
AZH1203CE
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Crossroller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1203F
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Crossroller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1211
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Sealed Push Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1211CE
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Sealed Push Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1211F
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Sealed Push Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1212CE
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Sealed Roller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1212F
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Sealed Roller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1213CE
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Sealed Crossroller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1213F
Snap Acting/Limit Switch, SPDT, Momentary, 4.5mm, Screw Terminal, Sealed Crossroller Plunger Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1221
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1221CE
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
AZH1221F
Snap Acting/Limit Switch, SPDT, Momentary, 11mm, Screw Terminal, Roller Lever Actuator, Panel Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明