AXT228124 [PANASONIC]

Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT;


型号：	AXT228124
厂家：	PANASONIC
描述：	Board Stacking Connector, 28 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT 连接器
文件：	总11页 (文件大小：430K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

For board-to-board For board-to-FPC

Partly to Be Discontinued

Last time buy: September 30, 2016

Narrow pitch connectors

(0.35mm pitch)

P35S

FEATURES

1. Small size 0.35 mm pitch

contributes to device miniaturization.

Smaller compared to P4S (20 pin

contacts):

3. Greater ﬂexibility in connector

placement.

Pattern wiring to the connector bottom is

made possible with a molded covering on

the undersurface of the connector.

Socket — 11% smaller,

Header — 12% smaller

Pickup cover (Material: SUS)

(Both covered and uncovered

types are available.)

Socket

Header

Soldering terminals

at each corner

Socket

Soldering terminals

at each corner

Soldering terminals

at each corner

RoHS compliant

Connector bottom:

Create any thru-hole and pattern wiring.

4. Gull-wing-shaped terminals to

facilitate visual inspections.

6.05 (20 pin contacts)

3.60

5. Connectors for inspection available

Pickup cover (Material: LCP)

(Both covered and uncovered

types are available.)

APPLICATIONS

Mobile devices, such as cellular

phones, digital still cameras and

digital video cameras.

Soldering terminals

at each corner

Header

5.23 (20 pin contacts)

2.35

2. Strong resistance to adverse

environments! Utilizes

“

” construction

for high contact reliability.

ORDERING INFORMATION

AXT

1: Narrow Pitch Connector P35S (0.35 mm pitch) Socket

2: Narrow Pitch Connector P35S (0.35 mm pitch) Header

Number of pins (2 digits)

Mated height

1: For mated height 1.5 mm

Functions

2: No pickup cover, without positioning bosses

6: With pickup cover, without positioning bosses

Surface treatment (Contact portion / Terminal portion)

4: Ni plating on base, Au plating on surface (for Ni barrier available)

4: Ni plating on base, Au plating on surface

ACCTB30E 201509-T

–1–

Partly to Be Discontinued

Last time buy: September 30, 2016

^{Narrow pitch connectors}P35S ^{(0.35mm pitch)}

PRODUCT TYPES

Part number

Packing

Mated height

Number of pins

Socket

Header

Inner carton

Outer carton

100

AXT120124

AXT122124

AXT124124

AXT126124

AXT128124

AXT130124

AXT132124

AXT134124

AXT136124

AXT138124

AXT140124

AXT150124

AXT152124

AXT160124

AXT170124

AXT180124

AXT190124

AXT100124

AXT220124

AXT222124

AXT224124

AXT226124

AXT228124

AXT230124

AXT232124

AXT234124

AXT236124

AXT238124

AXT240124

AXT250124

AXT252124

AXT260124

AXT270124

AXT280124

AXT290124

AXT200124

1.5mm

3,000 pieces

6,000 pieces

Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units.

For samples, please contact our sales ofﬁce.

2. If you require the pickup cover, change the eighth digit of the part number from “2” to “6” in your order. Note that the pickup cover is not available for some types

depending on the number of pins. Check the latest product speciﬁcations.

3. The above part numbers are for connectors without positioning bosses, which are standard.When ordering connectors with positioning bosses, please contact our

sales ofﬁce.

SPECIFICATIONS

1. Characteristics

Item

Speciﬁcations

0.25A/pin contact (Max. 4 A at total pin contacts)

60V AC/DC

Conditions

Rated current

Rated voltage

—

Rated voltage is applied for one minute and check for

short circuit or damage with a detection current of 1mA.

Electrical

characteristics

Breakdown voltage

Insulation resistance

Contact resistance

150V AC for 1 min.

Min. 1,000MΩ (initial)

Max. 100mΩ

Using 250V DC megger (applied for 1 min.)

Based on the contact resistance measurement method

speciﬁed by JIS C 5402.

Composite insertion force

Composite removal force

Max. 0.981N/pin contacts × pin contacts (initial)

Min. 0.0588N/pin contacts × pin contacts

Mechanical

characteristics

Contact holding force

(Socket contact)

Measuring the maximum force.

As the contact is axially pull out.

Min. 0.981N/pin contacts

Ambient temperature

–55°C to +85°C

No freezing at low temperatures

Max. peak temperature of 260°C (on the surface of the

PC board around the connector terminals)

Infrared reﬂow soldering

Soldering heat resistance

300°C within 5 sec. or 350°C within 3 sec.

Soldering iron

–55°C to +85°C (product only)

–40°C to +50°C (emboss packing)

Storage temperature

No freezing at low temperatures

Conformed to MIL-STD-202F, method 107G

Order Temperature (°C) Time (minutes)

–55₋₃

Max. 5

Environmental

characteristics

Thermal shock resistance

(header and socket mated)

5 cycles, insulation resistance min. 100MΩ,

contact resistance max. 100mΩ

85⁺³

Max. 5

–55₋₃

Humidity resistance

(header and socket mated)

120 hours, insulation resistance min. 100MΩ,

contact resistance max. 100mΩ

Conformed to IEC60068-2-78

Temperature 40 2°C, humidity 90 to 95% R.H.

Saltwater spray resistance

(header and socket mated)

24 hours, insulation resistance min. 100MΩ,

contact resistance max. 100mΩ

Conformed to IEC60068-2-11

Temperature 35 2°C, saltwater concentration 5 1%

H²S resistance

(header and socket mated)

48 hours,

contact resistance max. 100mΩ

Temperature 40 2°C, gas concentration 3 1 ppm,

humidity 75 to 80% R.H.

Lifetime

characteristics

Repeated insertion and removal speed of

max. 200 times/hours

Insertion and removal life

50 times

Unit weight

50 pin contact type: Socket: 0.06 g Header: 0.03 g

2. Material and surface treatment

Part name

Material

Surface treatment

Molded portion

LCP resin (UL94V-0)

—

Contact portion: Ni plating on base, Au plating on surface

Terminal portion: Ni plating on base, Au plating on surface (Except for front edge of terminal)

However, the area adjacent to the socket terminal is exposed to Ni on base.

Soldering terminals portion;

Contact and Post

Copper alloy

Socket: Ni plating on base, Pd + Au ﬂash plating on surface (Expect for front edge of terminal)

Header: Ni plating on base, Au plating on surface (Expect for front edge of terminal)

ACCTB30E 201509-T

–2–

Partly to Be Discontinued

Last time buy: September 30, 2016

^{Narrow pitch connectors}P35S ^{(0.35mm pitch)}

The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/

DIMENSIONS ^{(Unit: mm)}

1. Socket (Mated height: 1.5mm)

• Without pickup cover

CAD Data

Terminal coplanarity

0.08

B 0.1

1.45

0.35 0.05

(Contact and

soldering terminals)

0.12 0.03

Dimension table (mm)

Number of pins/

dimension

6.05

6.40

6.75

7.10

7.45

7.80

8.15

8.50

8.85

9.20

9.55

11.30

11.65

3.15

3.50

3.85

4.20

4.55

4.90

5.25

5.60

5.95

6.30

6.65

4.85

5.20

5.55

5.90

6.25

6.60

6.95

7.30

7.65

8.00

8.35

(0.66)

Y (Note)

Z (Note)

0.30 0.03

C 0.1

General tolerance: 0.2

8.40 10.10

8.75 10.45

13.05 10.15 11.85

14.80 11.90 13.60

16.55 13.65 15.35

18.30 15.40 17.10

20.05 17.15 18.85

100

• With pickup cover

Terminal coplanarity

0.08

(Contact and

soldering terminals)

B 0.1

1.45

0.35 0.05

0.12 0.03

Pickup cover

(0.66)

Y (Note)

Z (Note)

0.30 0.03

C 0.1

General tolerance: 0.2

Note: Since soldering terminals are built into the body, the Y and Z parts are connected electrically.

ACCTB30E 201509-T

–3–

Partly to Be Discontinued

Last time buy: September 30, 2016

^{Narrow pitch connectors}P35S ^{(0.35mm pitch)}

2. Header (Mated height: 1.5mm)

• Without pickup cover

CAD Data

Terminal coplanarity

0.08

B 0.1

1.24

(Contact and

soldering terminals)

0.35 0.05

0.12 0.03

Dimension table (mm)

Number of pins/

dimension

100

5.23

5.58

5.93

6.28

6.63

6.98

7.33

7.68

8.03

8.38

8.73

10.48

10.83

3.15

3.50

3.85

4.20

4.55

4.90

5.25

5.60

5.95

6.30

6.65

8.40

4.55

4.90

5.25

5.60

5.95

6.30

6.65

7.00

7.35

7.70

8.05

9.80

Soldering terminals

0.12 0.03

C 0.1

General tolerance: 0.2

8.75 10.15

12.23 10.15 11.55

13.98 11.90 13.30

15.73 13.65 15.05

17.48 15.40 16.80

19.23 17.15 18.55

• With pickup cover

Terminal coplanarity

0.08

B 0.1

1.64

0.35 0.05

0.12 0.03

(Contact and

soldering terminals)

Pickup cover

Soldering terminals

0.12 0.03

C 0.1

General tolerance: 0.2

Socket and Header are mated

Header

Socket

ACCTB30E 201509-T

–4–

Partly to Be Discontinued

Last time buy: September 30, 2016

^{Narrow pitch connectors}P35S ^{(0.35mm pitch)}

EMBOSSED TAPE DIMENSIONS ^{(unit: mm, Common for respective contact type, socket and header)}

• Tape dimensions (Conforming to JIS C 0806:1990.

However, some tapes have mounting hole pitches that do

not comply with the standard.)

• Plastic reel dimensions (Conforming to EIAJ ET-7200B)

Tape I

Tape II

Taping reel

D 1

A 0.3

Label

A 0.3

Top cover tape

1.75

Embossed carrier tape

Embossed mounting-hole

8.0

Dimension table (mm)

Mated height

Number of pins

Type of taping

Tape I

Quantity per reel

3,000

Max. 24

26 to 70

72 to 100

16.0

24.0

32.0

—

7.5

17.4

25.4

33.4

Common for socket and header:

1.5mm

Tape I

11.5

14.2

3,000

Tape II

28.4

3,000

Connector orientation with respect to direction of progress of embossed tape

Type

Common for P35S

Direction of

tape progress

Socket

Header

Note: There is no indication on this product regarding top-bottom or left-right orientation.

ACCTB30E 201509-T

–5–

^{Narrow pitch connectors}P35S ^{(0.35mm pitch)}

For board-to-board For board-to-FPC

Partly to Be Discontinued

Last time buy: September 30, 2016

Connectors for

inspection usage

(0.35mm pitch)

P35S

FEATURES

APPLICATIONS

1. 3,000 mating and unmating cycles

2. Same external dimensions and foot

pattern as standard type.

Ideal for module unit inspection and

equipment assembly inspection

3. Improved mating

Insertion and removal easy due to a

reduction in mating retention force. This

is made possible by a simple locking

structure design.

Socket

Header

Note: Mating retention force cannot be

warranted.

RoHS compliant

TABLE OF PRODUCT TYPES

✩: Available for sale

Product name

Number of pins

100

P35S

for inspection

✩

Notes: 1. The pickup surface shape of the inspection sockets is different from that of the standard sockets. (For details, refer to the product speciﬁcation diagram.)

2. Please inquire number of pins other than those shown above.

3. Please inquire us regarding availability.

4. Please keep the minimum order quantities no less than 50 pieces per lot.

5. Please inquire if further information is needed.

PRODUCT TYPES

Speciﬁcations

Part No.

Speciﬁcations

Part No.

With pickup cover Without positioning bosses

AXT1E∗∗66

AXT1E∗∗26

With pickup cover Without positioning bosses

AXT2E∗∗66

AXT2E∗∗26

Socket

Header

No pickup cover

Without positioning bosses

No pickup cover

Without positioning bosses

Notes: 1. When placing an order, substitute the “∗” (asterisk) in the above part number with the number of pins for the speciﬁc connector.

2. The above part numbers are for connectors without positioning bosses, which are standard.When ordering connectors with positioning bosses, please contact our

local sales ofﬁce.

ACCTB30E 201509-T

–6–

Partly to Be Discontinued

Last time buy: September 30, 2016

^{Narrow pitch connectors}P35S ^{(0.35mm pitch)}

NOTES

1. As shown below, excess force

during insertion may result in damage

to the connector or removal of the

solder. Also, to prevent connector

damage please conﬁrm the correct

position before mating connectors.

Socket (Mated height: 1.5mm)

Header (Mated height: 1.5mm)

Recommended PC board pattern

(TOP VIEW)

0.35 0.03

0.20 0.03

0.35 0.03

0.20 0.03

0.45 0.03

0.70 0.03

0.85 0.03

0.70 0.03

: Insulation area

Recommended metal mask pattern

Metal mask thickness: When 120 μm

(Terminal portion opening area ratio: 60%)

(Metal portion opening area ratio: 100%)

Metal mask thickness: When 120 μm

(Terminal portion opening area ratio: 60%)

(Metal portion opening area ratio: 100%)

2. Keep the PC board warp no more

than 0.03 mm in relation to the overall

length of the connector

0.35 0.01

0.18 0.01

0.35 0.01

0.18 0.01

0.45 0.01

0.70 0.01

0.85 0.01

Max. 0.03 mm

3. If extra resistance to shock caused

by dropping is required, we

recommend using P4.

4. Recommended PC board and metal

mask patterns

Please refer to the latest product

speciﬁcations when designing your

product.

Connectors are mounted with high pitch

density, intervals of 0.35 mm, 0.4 mm or

0.5 mm.

In order to reduce solder and ﬂux rise,

solder bridges and other issues make

sure the proper levels of solder is used.

The ﬁgures to the right are recommended

metal mask patterns. Please use them as

a reference.

ACCTB30E 201509-T

–7–

Notes on Using Narrow pitch Connectors/Stacking Connectors for High Current

For board-to-board/board-to-FPC

Notes on Using Narrow pitch Connectors/

Stacking Connectors for High Current

About safety remarks

Observe the following safety precautions

to prevent accidents and injuries.

1) Do not use these connectors beyond

the speciﬁed ranges. The use of the

product outside of the speciﬁed rated

current and breakdown voltage ranges

may cause abnormal heating, smoke,

and ﬁre.

2) In order to avoid accidents, make sure

you have thoroughly reviewed the

speciﬁcations and the operation manual

before use. Please consult us if you plan

to use the product in a way not covered

by the speciﬁcations. Otherwise, the

quality cannot be guaranteed.

degraded performance may cause

deterioration in insulation performance,

thus resulting in abnormal heat

3) We are consistently striving to improve

quality and reliability. However, the fact

remains that electrical components and

devices generally cause failures at a

given statistical probability. Furthermore,

their durability varies with use

environments or use conditions. In this

respect, we ask you to check for actual

electrical components and devices under

actual conditions before use without fail.

Continuously using them in a state of

generation, smoke generation, or ﬁring.

We ask you to carry out safety design

including redundancy design, design for

ﬁre spread prevention, and design for

malfunction prevention as well as

periodic maintenance so that no

accidents resulting in injury or death, ﬁre

accidents, or social damage will be

caused as a result of our product failure

or service life.

Regarding the design of devices and PC board patterns

1) When using the board to board

connectors, do not connect a pair of

board with multiple connectors.

coverlay, etc. so as to prevent the

occurrence of poor soldering.

6) For all connectors of the narrow pitch

series, to prevent the PC board from

coming off during vibrations or impacts,

and to prevent loads from falling directly

on the soldered portions, be sure to

design some means to ﬁx the PC board

in place.

backside of the connector area.

The size of stiffener should be bigger

than the recommended PC board pattern

area shown in the drawing. (Outward

dimension + approximate 0.5 to 1.0 mm)

Recommended material of reinforcement

is Glass-Fiber board, Polyimide board

(0.2 to 0.3 mm thickness) or SUS (0.1 to

0.2 mm thickness) which have 0.2 to 0.3

mm thickness.

Otherwise, misaligned connector

positions may cause mating failure or

product breakage.

2) With mounting equipment, there may

be up to a 0.2 to 0.3-mm error in

positioning. Be sure to design PC boards

and patterns while taking into

Example) Secure in place with screws

consideration the performance and

abilities of the required equipment.

3) Some connectors have tabs embossed

on the body to aid in positioning. When

using these connectors, make sure that

the PC board is designed with positioning

holes to match these tabs.

4) To ensure the required mechanical

strength when soldering the connector

terminals, make sure the PC board

meets recommended PC board pattern

design dimensions given.

• Connector would be taken off due to

size, weight or bending force of FPC at

dropping condition.

Please check the connector not to be

taken off at real equipment.

In order to secure connector’s connection

even when a shock applied, please take

measures against taking off of the

connector.

8) The narrow pitch connector series is

designed to be compact and thin.

Although ease of handling has been

taken into account, take care when

mating the connectors, as displacement

or angled mating could damage or

deform the connector.

Screw

Connector

Spacer

PC board

When connecting PC boards, take

appropriate measures to prevent the

connector from coming off.

7) Notes when using a FPC.

• Due to its ﬂexibility, a FPC board may

make the connector terminal soldering

connection weak.

In order to strengthen the connection and

prevent the peeling off of terminal

soldering, a stiffener is strongly

recommended to be attached to the

5) PC board

Control the thicknesses of the coverlay

and adhesive to prevent poor soldering.

This connector has no stand-off.

Therefore, minimize the thickness of the

Regarding the selection of the connector placement machine and the mounting

procedures

1) Select the placement machine taking

into consideration the connector height,

required positioning accuracy, and

packaging conditions.

2) Be aware that if the catching force of

the placement machine is too great, it

may deform the shape of the connector

body or connector terminals.

3) Be aware that during mounting,

external forces may be applied to the

connector contact surfaces and terminals

and cause deformations.

4) Depending on the size of the

connector being used, self alignment

may not be possible. In such cases, be

sure to carefully position the terminal with

the PC board pattern.

5) The positioning bosses give an

approximate alignment for positioning on

the PC board. For accurate positioning of

the connector when mounting it to the PC

board, we recommend using an

automatic positioning machine.

6) Excessive mounter chucking force may

deform the molded or metal part of the

connector. Consult us in advance if

chucking is to be applied.

ACCTB48E 201503-T

–8–

Notes on Using Narrow pitch Connectors/Stacking Connectors for High Current

Regarding soldering

■ Reﬂow soldering

• Soldering conditions

■ Hand soldering

1) Measure the recommended proﬁle

temperature for reﬂow soldering by

placing a sensor on the PC board near

the connector surface or terminals.

(Please refer to the speciﬁcation for detail

because the temperature setting differs

by products.)

Please use the reﬂow temperature proﬁle

conditions recommended below for

reﬂow soldering. Please contact us

before using a temperature proﬁle other

than that described below (e.g. lead-free

solder).

1) Set the soldering iron so that the tip

temperature is less than that given in the

table below.

Table A

Product name

Soldering iron temperature

300°C within 5 sec.

350°C within 3 sec.

SMD type connectors

• Narrow pitch connectors

2) As for cream solder printing, screen

printing is recommended.

(except P8 type)

2) Do not allow ﬂux to spread onto the

connector leads or PC board. This may

lead to ﬂux rising up to the connector

inside.

3) Touch the soldering iron to the foot

pattern. After the foot pattern and

connector terminal are heated, apply the

solder wire so it melts at the end of the

connector terminals.

Upper limited (Solder heat resistance)

Lower limited (Solder wettability)

3) When setting the screen opening area

and PC board foot pattern area, refer the

recommended PC board pattern and

window size of metal mask on the

speciﬁcation sheet, and make sure that

the size of board pattern and metal mask

at the base of the terminals are not

increased.

4) Please pay attentions not to provide

too much solder. It makes miss mating

because of interference at soldering

portion when mating.

Temperature

Peak temperature

Peak temperature 260°C

230°C

220°C

200°C

Preheating

60 to 120 sec.

180°C

150°C

25 sec.

70 sec.

Time

• Narrow pitch connector (P8)

Temperature

Apply the solder

wire here

Peak temperature

245°C max.

200°C

Preheating

155 to 165°C

Terminal

Small angle as

60 to 120 sec.

possible up to

45 degrees

Within 30 sec.

Time

Terminal

Paste

solder

PC board

For products other than the ones above,

please refer to the latest product

speciﬁcations.

foot pattern

Pattern

5) When mounting on both sides of the

PC board and the connector is mounting

on the underside, use adhesives or other

means to ensure the connector is

properly ﬁxed to the PC board. (Double

reﬂow soldering on the same side is

possible.)

6) The condition of solder or ﬂux rise and

wettability varies depending on the type

of solder and ﬂux. Solder and ﬂux

characteristics should be taken into

consideration and also set the reﬂow

temperature and oxygen level.

4) Be aware that soldering while applying

a load on the connector terminals may

cause improper operation of the

connector.

5) Thoroughly clean the soldering iron.

6) Flux from the solder wire may get on

the contact surfaces during soldering

operations. After soldering, carefully

check the contact surfaces and clean off

any solder before use.

7) These connector is low proﬁle type. If

too much solder is supplied for hand

soldering, It makes miss mating because

of interference at soldering portion.

Please pay attentions.

8) The temperature proﬁles given in this

catalog are values measured when using

the connector on a resin-based PC

board. When performed reﬂow soldering

on a metal board (iron, aluminum, etc.) or

a metal table to mount on a FPC, make

sure there is no deformation or

discoloration of the connector before

mounting.

9) Consult us when using a screen-

printing thickness other than that

recommended.

7) Do not use resin-containing solder.

Otherwise, the contacts might be ﬁrmly

ﬁxed.

■ Solder reworking

1) Finish reworking in one operation.

2) In case of soldering rework of bridges.

Don’t use supplementary solder ﬂux.

Doing so may cause contact problems by

ﬂux.

3) Keep the soldering iron tip temperature

below the temperature given in Table A.

Handling Single Components

1) Make sure not to drop or allow parts to

fall from work bench.

2) Excessive force applied to the

terminals could cause warping, come

out, or weaken the adhesive strength of

the solder. Handle with care.

3) Do not insert or remove the connector

when it is not soldered. Forcibly applied

external pressure on the terminals can

weaken the adherence of the terminals to

the molded part or cause the terminals to

lose their evenness.

ACCTB48E 201503-T

–9–

Notes on Using Narrow pitch Connectors/Stacking Connectors for High Current

Precautions for mating

Press-fitting while the mating

inlets of the socket and

This product is designed with ease of

handling. However, in order to prevent the

header are not matched.

Strongly pressed and twisted

deformation or damage of contacts and

molding, take care and do not mate the

connectors as shown right.

Tilted mating

Cleaning ﬂux from PC board

There is no need to clean this product.

If cleaning it, pay attention to the

following points to prevent the negative

effect to the product.

2) Some cleaning solvents are strong and

they may dissolve the molded part and

characters, so pure water passed liquid

solvent is recommended.

1) Keep the cleaning solvent clean and

prevent the connector contacts from

contamination.

Handling the PC board

■ Handling the PC board after

mounting the connector

When cutting or bending the PC board

after mounting the connector, be careful

that the soldered sections are subjected

to excessive force.

The soldered areas should not be subjected to force.

Storage of connectors

1) To prevent problems from voids or air

pockets due to heat of reﬂow soldering,

avoid storing the connectors in areas of

high humidity.

Some connectors may change color

slightly if subjected to ultraviolet rays

during storage.This is normal and will not

affect the operation of the connector.

3) When storing the connectors with the

PC boards assembled and components

alreeady set, be careful not to stack them

up so the connectors are subjected to

excessive forces.

4) Avoid storing the connectors in

locations with excessive dust. The dust

may accumulate and cause improper

connections at the contact surfaces.

2) Depending on the connector type, the

color of the connector may vary from

connector to connector depending on

when it is produced.

Other Notes

1) Do not remove or insert the electriﬁed

connector (in the state of carrying current

or applying voltage).

4) When coating the PC board after

soldering the connector to prevent the

deterioration of insulation, perform the

coating in such a way so that the coating

does not get on the connector.

5) There may be variations in the colors

of products from different production lots.

This is normal.

7) Product failures due to condensation

are not covered by warranty.

2) Dropping of the products or rough

mishandling may bend or damage the

terminals and possibly hinder proper

reﬂow soldering.

3) Before soldering, try not to insert or

remove the connector more than

absolutely necessary.

6) The connectors are not meant to be

used for switching.

ACCTB48E 201503-T

–10–

Notes on Using Narrow pitch Connectors/Stacking Connectors for High Current

Regarding sample orders to conﬁrm proper mounting

When ordering samples to conﬁrm

proper mounting with the placement

machine, connectors are delivered in 50-

piece units in the condition given right.

Consult a sale representative for ordering

sample units.

Please refer to the latest product

speciﬁcations when designing your

product.

Condition when delivered from manufacturing

Reel

(Delivery can also be made on a reel by

customer request.)

Required number

Embossed tape

of products for

amount required for

sample production

the mounting

(Unit 50 pcs.)

ACCTB48E 201503-T

–11–

AXT228124 [PANASONIC]

相关型号：

AXT230164

AXT232124

AXT232164

AXT234124

AXT234164

AXT236124

AXT236164

AXT238124

AXT238164

AXT240124

AXT240164

AXT250124