AXK744125G_技术文档

AXK7, 8

NARROW-PITCH

NARROW PITCH

CONNECTORS FOR

BOARD-TO-BOARD

AND BOARD-TO-FPC

CONNECTION

(0.4mm)CONNECTORS

P4 SERIES

FEATURES

1. 0.4 mm pitch and support for mated

heights of up to 1.5 mm, 2.0 mm, 2.5

mm, 3.0 mm, 3.5 mm, and 4.0 mm.

2. High impact-resistant construction.

1) Adoption of bellows-type contact

structure.

2) Guides are provided to take up any

position shift and facilitate insertion.

Insertion guide

The roll surfaces are in contact

with each other, providing high

contact reliability.

Since the contact is

3) The connector has a simple lock

mechanism.

formed by bending thin

plate, it has a spring-like

quality. This construction

helps make it resistant to

dropping and twisting.

Socket and

header are

mated

Socket

Header

Header side

contact

2) It is constructed with impact dispersion

keys inside the body to disperse shocks

when dropped.

Socket side

contact

Simple lock

mechanism

G What is Ni barrier construction?

Impact dispersion key

Socket

By providing an exposed nickel part on the

gold (Au) plated contact, solder creeping is

prevented despite the ultra low profile.

4. Design makes efﬁcient mounting.

Features a terminal ﬂatness of 0.08 mm,

construction resistant to creeping ﬂux,

and design that facilitates visual

[Contact]

Header side contact

Ni barrier

Cu Ni Au

inspection of the soldered part.

Header

Exposed

Ni part

5. Compliance with RoHS Directive

Environmentally friendly, the connectors

comply with Europe’s RoHS Directive.

Cadmium, lead, mercury, hexavalent

chromium, PBB and PBDE are not used.

6. Connectors for inspection available

Connectors for inspection are available

that are ideal for modular unit inspection

and inspection in device assembly

processes.

A high level of shock resistance is

ensured by dispersing impact over the

four locations where the socket

indentations and header protrusions are

mated together.

Note: The following numbers of contacts

are not supported due to suction surface

factors.

• No retention ﬁtting: 18 contacts or less

• With retention ﬁtting: 22 contacts or less

3. Construction makes designing

devices easier.

1) The lower connector bottom surface

construction prevents contact and shorts

between the PCB and metal terminals.

This enables freedom in pattern wiring,

helping to make PCB’s smaller.

Cross section of

socket side contact

Socket side contact

Note: Construction makes solder creeping difficult

because header side is formed at the same time.

G What is V notch construction?

By using the edge for the contacting part

and increasing contact pressure per unit

area, the effectiveness in removing flux

and contaminants is increased compared

to its predecessor. This is also effective in

preventing the trapping of contaminants.

APPLICATIONS

Compact portable devices “Cellular

phones, DVC, Digital cameras, etc”

[Cross section of contacting part]

Without notch

Socket side contact cross section

With V notch

Ideal for Board-to-FPC connections

FPC

Reinforcing plate

Before

mating

Narrow-pitch

connectors P4

PCB

1.5mm

After

mating

Header side contact cross section

The simple lock mechanism

ensures that the connector

This enables the number of pins

to be doubled white the size re-

clicks into position when it is mains the same as that for exist-

inserted for reliable single-

action insertion on the PCB.

ing FPC connectors. This, in turn,

contributes to making products

and equipment more compact.

Connector bottom: Create any thru-hole and pattern wiring.

AXK7, 8

TABLE OF PRODUCT TYPES

P4 (0.4 mm pitch): No retention ﬁtting

P4 (0.4 mm pitch):With retention ﬁtting

✩: Available for sale

Mated

height

Mated

height

4.0mm

3.5mm

3.0mm

2.5mm

2.0mm

1.5mm

14

✩

10

✩

16

20

22

24

26

28

30

32

34

36

38

40

42

44

50

54

60

64

70

80

90

100

12

20

22

30

34

40

44

46

50

60

80

90

100

✩

Notes:

1. Please contact us regarding numbers of contacts other

than those given above.

2. * Header comes with no positioning bosses.

✩

ORDERING INFORMATION

AXK

AXK7: Narrow Pitch Connector P4 (0.4 mm pitch) Socket

AXK8: Narrow Pitch Connector P4 (0.4 mm pitch) Header

Number of contacts (2 digits)

Stacking height

1: For mated height 1.5 mm

2: For mated height 2.0 mm

3: For mated height 2.5 mm and 3 mm

5: For mated height 4.0 mm

1: For mated height 1.5 mm, 2.0 mm and 2.5 mm

2: For mated height 3 mm and 4 mm

Functions

1: With removal and retention fitting, with positioning bosses

2: With removal and retention fitting, no positioning bosses

3: No removal and retention fitting, with positioning bosses

4: No removal and retention fitting, no positioning bosses

Surface treatment (Contact portion / Terminal portion)

5: AU plating over Ni / AU plating over Ni

7: AU plating over Ni / AU plating over Ni (for Ni barrier product available)

5: AU plating over Ni / AU plating over Ni

Other specifications

Y: V notch type product

Packing

G: 3,000 pieces with embossed tape × 2 reels

AXK7, 8

PRODUCT TYPES

1. No retention ﬁtting

Part number

Packing

Number of

Mated height

Socket

contacts

Header

Inner carton

Outer carton

Ni barrier product:

Not available

AXK714145*

AXK716145*

AXK720145*

AXK722145*

AXK724145*

AXK726145*

AXK728145*

AXK730145*

AXK734145*

AXK736145*

AXK740145*

AXK744145*

AXK750145*

AXK754145*

AXK760145*

AXK770145*

AXK780145*

AXK790145*

AXK700145*

AXK720245*

AXK724245*

AXK730245*

AXK734245*

AXK740245*

AXK750245*

AXK700245*

AXK730345*

AXK740345*

AXK770345*

Ni barrier product:

Available

14

16

20

22

24

26

28

30

34

AXK714147*

AXK716147*

AXK720147*

AXK722147*

AXK724147*

AXK726147*

AXK728147*

AXK730147*

AXK734147*

AXK736147*

AXK740147*

AXK744147*

AXK750147*

AXK754147*

AXK760147*

AXK770147*

AXK780147*

AXK790147*

AXK700147*

AXK720247*

AXK724247*

AXK730247*

AXK734247*

AXK740247*

AXK750247*

AXK700247*

AXK730347*

AXK740347*

AXK770347*

AXK814145Y*

AXK816145Y*

AXK820145Y*

AXK822145Y*

AXK824145Y*

AXK826145Y*

AXK828145Y*

AXK830145Y*

AXK834145Y*

AXK836145Y*

AXK840145Y*

AXK844145Y*

AXK850145Y*

AXK854145Y*

AXK860145Y*

AXK870145Y*

AXK880145Y*

AXK890145Y*

AXK800145Y*

AXK820145Y*

AXK824145Y*

AXK830145Y*

AXK834145Y*

AXK840145Y*

AXK850145Y*

AXK800145Y*

AXK830145Y*

AXK840145Y*

AXK870145Y*

“Asterisk” mark on

end of part number;

G: 3,000 pieces

“Asterisk” mark on

end of part number;

G: 6,000 pieces

1.5 mm

36

40

44

50

54

60

70

80

90

100

20

24

30

34

40

50

100

30

40

70

“Asterisk” mark on

end of part number;

G: 3,000 pieces

“Asterisk” mark on

end of part number;

G: 6,000 pieces

2.0 mm

2.5 mm

“Asterisk” mark on

end of part number;

G: 3,000 pieces

“Asterisk” mark on

end of part number;

G: 6,000 pieces

Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units.

Samples for mounting conﬁrmation: Please contact us. See “Regarding sample orders to conﬁrm proper mounting” on page 10.

Samples: Small lot orders are possible.

2. The standard type comes with no positioning bosses. Connectors with positioning bosses are available on-demand production. For this type of connector, 8th digit of the part number changes

from 4 to 3. e.g. Mated height 1.5 mm and 20 contacts for socket without retention ﬁtting: AXK720135G

3. The 10th digit “Y” in the header part number indicates the connector has V-notch. (For details, please refer to page 1.)

4. Connectors of different mated height (3.0 mm and 4.0 mm) and different number of contacts are available on-demand production only. Please contact us for more details.

2. With retention ﬁtting

Part number

Packing

Number of

contacts

Socket

Mated height

Header

Inner carton

Outer carton

Ni barrier product:

Not available

AXK710125*

AXK712125*

AXK722125*

AXK730125*

AXK734125*

AXK740125*

AXK744125*

AXK746125*

AXK750125*

AXK760125*

AXK780125*

AXK790125*

AXK700125*

AXK720325*

AXK740325*

AXK750325*

AXK760325*

AXK780325*

AXK790325*

AXK720325*

AXK740325*

AXK750325*

AXK760325*

AXK780325*

AXK790325*

Ni barrier product:

Available

10

12

22

30

34

40

44

46

50

60

80

90

100

20

40

50

60

80

90

20

40

50

60

80

90

AXK710127*

AXK712127*

AXK722127*

AXK730127*

AXK734127*

AXK740127*

AXK744127*

AXK746127*

AXK750127*

AXK760127*

AXK780127*

AXK790127*

AXK700127*

AXK720327*

AXK740327*

AXK750327*

AXK760327*

AXK780327*

AXK790327*

AXK720327*

AXK740327*

AXK750327*

AXK760327*

AXK780327*

AXK790327*

AXK810125Y*

AXK812125Y*

AXK822125Y*

AXK830125Y*

AXK834125Y*

AXK840125Y*

AXK844125Y*

AXK846125Y*

AXK850125Y*

AXK860125Y*

AXK880125Y*

AXK890125Y*

AXK800125Y*

AXK820125Y*

AXK840125Y*

AXK850125Y*

AXK860125Y*

AXK880125Y*

AXK890125Y*

AXK820225Y*

AXK840225Y*

AXK850225Y*

AXK860225Y*

AXK880225Y*

AXK890225Y*

“Asterisk” mark on

end of part number;

G: 3,000 pieces

“Asterisk” mark on

end of part number;

G: 6,000 pieces

1.5 mm

“Asterisk” mark on

end of part number;

G: 3,000 pieces

“Asterisk” mark on

end of part number;

G: 6,000 pieces

2.5 mm

3.0 mm

“Asterisk” mark on

end of part number;

G: 3,000 pieces

“Asterisk” mark on

end of part number;

G: 6,000 pieces

Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units.

Samples for mounting conﬁrmation: Please contact us. See “Regarding sample orders to conﬁrm proper mounting” on page 10.

Samples: Small lot orders are possible.

2. The standard type comes with no positioning bosses.

Connectors with positioning bosses are available on-demand production. For this type of connector, 8th digit of the part number changes from 2 to 1. e.g. Mated height 1.5 mm and 10 contacts

for socket with retention ﬁtting: AXK710115G. However, 12 contacts header comes with no positioning bosses.

3. The 10th digit “Y” in the header part number indicates the connector has V-notch. (For details, please refer to page 1.)

4. Connectors of different mated height (2.0 mm and 4.0 mm) and different number of contacts are available on-demand production only. Please contact us for more details.

AXK7, 8

SPECIFICATIONS

1. Characteristics

Item

Speciﬁcations

0.3A/contact (Max. 5 A at total contacts)

60V AC/DC

Conditions

Rated current

Rated voltage

Electrical

Breakdown voltage

150V AC for 1 min.

Detection current: 1mA

characteristics

Insulation resistance

Min. 1,000MΩ (initial)

Using 250V DC megger (applied for 1 min.)

Measured based on the HP4338B measurement

method of JIS C 5402

Contact resistance

Max. 70mΩ

Composite insertion force

Max. 0.981N {100gf}/contacts × contacts (initial)

Min. 0.0588N {6gf}/contacts × contacts

(Mated height 1.5 mm, without removal and retention

ﬁtting)

Min. 0.1176N {12gf}/contacts × contacts

(Mated height 1.5 mm, except without removal and

retention ﬁtting)

Mechanical

characteristics

Composite removal force

Measures the maximum load in the post axial direction

until removal

Post holding force

Min. 0.981N {100gf}/contacts

Ambient temperature

Soldering heat resistance

–55°C to +85°C

Max. peak temperature of 245°C

300°C within 5 sec.

No freezing at low temperatures

Infrared reﬂow soldering

Soldering iron

Sequence

5 cycles,

insulation resistance min. 100MΩ,

contact resistance max. 70mΩ

1. –55_–3⁰°C, 30 minutes

2. ~ , Max. 5 minutes

3. 85⁺³₀°C, 30 minutes

4. ~ , Max. 5 minutes

Thermal shock resistance

(header and socket mated)

Environmental

characteristics

120 hours,

insulation resistance min. 100MΩ,

contact resistance max. 70mΩ

Humidity resistance

(header and socket mated)

Bath temperature 40 2°C,

humidity 90 to 95% R.H.

24 hours,

insulation resistance min. 100MΩ,

contact resistance max. 70mΩ

Saltwater spray resistance

(header and socket mated)

Bath temperature 35 2°C,

saltwater concentration 5 1%

H²S resistance

(header and socket mated)

48 hours,

contact resistance max. 70mΩ

Bath temperature 40 2°C,

gas concentration 3 1 ppm, humidity 75 to 80% R.H.

Lifetime

characteristics

Repeated insertion and removal speed of max. 200

times/hours

Insertion and removal life

50 times

Mated height 1.5mm, 20 contacts; Socket: 0.04g

Header: 0.02g

Unit weight

2. Material and surface treatment

Part name

Material

Surface treatment

Molded portion

Heat-resistant resin (UL94V-0), Black

—

Contact portion: Au plating over Ni

Terminal portion: Au plating over Ni (Except for thick of terminal)

However, upper terminal of Ni barrier production: Exposed over Ni

Contact and Post

Copper alloy

Retention ﬁtting portion

Sn plating over Ni (Except for front terminal)

AXK7, 8

DIMENSIONS (mm)

1. No Retention Fitting

Socket (Mated height: 1.5 mm, 2.0 mm, and 2.5 mm)

Dimension table (mm)

Number of contacts/

dimension

A

B

C

D

B 0.01

14

16

20

22

24

26

28

30

34

36

40

44

50

54

60

70

80

90

100

5.1

5.5

2.4

2.8

—

2.8

3.2

—

0.40 0.05

6.3

3.6

1.6

2.0

2.4

2.8

3.2

3.6

4.4

4.8

5.6

6.4

7.6

8.4

9.6

11.6

13.6

15.6

17.6

0.08

0.40 0.05

0.15 0.03

6.7

4.0

7.1

4.4

E

7.5

4.8

7.9

5.2

8.3

5.6

9.1

6.4

9.5

6.8

10.3

11.1

12.3

13.1

14.3

16.3

18.3

20.3

22.3

7.6

0.80

8.4

C

9.6

10.4

11.6

13.6

15.6

17.6

19.6

Max. 18 contacts

A

B 0.1

Mated height/dimension

E

1.5mm

2.0mm

2.5mm

1.50

1.92

2.42

D

General tolerance: 0.2

Header (Mated height: 1.5 mm, 2.0 mm, and 2.5 mm)

Dimension table (mm)

Number of contacts/

A

B 0.1

A

B

C

D

0.08

dimension

0.40 0.05

0.15 0.03

14

16

20

22

24

26

28

30

34

36

40

44

50

54

60

70

80

90

100

3.9

4.3

2.4

2.8

—

3.04

3.44

—

1.31

5.1

3.6

1.6

2.0

2.4

2.8

3.2

3.6

4.4

4.8

5.6

6.4

7.6

8.4

9.6

11.6

13.6

15.6

17.6

5.5

4.0

5.9

4.4

6.3

4.8

6.7

5.2

0.10 0.03

0.76

7.1

5.6

C

7.9

6.4

8.3

6.8

9.1

7.6

9.9

8.4

11.1

11.9

13.1

15.1

17.1

19.1

21.1

9.6

Max. 18 contacts

A

10.4

11.6

13.6

15.6

17.6

19.6

B 0.1

D

General tolerance: 0.2

Socket and Header are mated

AXK7, 8

2. With Retention Fitting

Socket

Dimension table (mm)

Number of contacts/

dimension

A

B

C

D

E

A

0.08

B 0.1

10

12

20

22

30

34

40

44

46

50

60

80

90

100

5.90

6.30

7.90

8.30

9.90

1.60

2.00

3.60

4.00

5.60

—

4.60

5.00

6.60

7.00

8.60

9.40

2.00

2.40

2.80

—

0.40 0.05

0.15 0.03

F

—

2.80

3.60

—

10.70 6.40

11.90 7.60

12.70 8.40

13.10 8.80

13.90 9.60

—

4.80 10.60

5.60 11.40

6.00 11.80

6.80 12.60

—

Fitting

0.10 0.03

0.80

—

C

D

—

15.90 11.60 8.80 14.60

19.90 15.60 12.80 18.60

21.90 17.60 14.80 20.60

23.90 19.60 16.80 22.60

—

0.50

—

Mated height/dimension

1.5mm

F

1.50

2.42

3.42

10 and 12 contacts

20 and 22 contacts

2.5mm, 3.0mm

4.0mm

A

B 0.1

A

B 0.1

E

General tolerance: 0.2

Header

Dimension table (mm)

Number of contacts/

A

B

C

D

E

A

dimension

B 0.1

10

12

20

22

30

34

40

44

46

50

60

80

90

100

3.10

1.60

2.00

3.60

4.00

5.60

6.40

7.60

8.40

—

1.94

2.34

3.94

4.34

5.94

6.74

7.94

8.74

9.14

9.94

1.64

2.04

2.80

3.20

—

0.08

0.40 0.05

3.50

5.10

5.50

7.10

7.90

9.10

9.90

0.15 0.03

F

—

Fitting

2.80

3.60

4.80

5.60

6.00

6.80

—

10.30 8.80

11.10 9.60

—

0.76

0.10 0.03

C

D

—

13.10 11.60 8.80 11.94

17.10 15.60 12.80 15.94

19.10 17.60 14.80 17.94

21.10 19.60 16.80 19.94

—

0.50

Mated height/dimension

1.5mm, 2.0mm, 2.5mm

3.0mm, 4.0mm

G

1.31

2.26

10 and 12 contacts

20 and 22 contacts

A

B 0.1

E

General tolerance: 0.2

Socket and Header are mated.

AXK7, 8

EMBOSSED TAPE DIMENSIONS ^{(unit: mm, Common for respective contact type, socket and header)}

• Tape dimensions (Conforming to JIS C 0806-1990.

However, some tapes have mounting hole pitches that do not

comply with the standard.)

• Reel dimensions (Conforming to EIAJ ETR-7002)

Tape I

Tape II

E 1

A 0.3

B

C

Top cover tape

1.75

C

4

2

4

2

Emboss carrier tape

F

D

1.5^+0.1dia.

0

Dimension table (mm)

1. No Retention Fitting

Mated height

Number of contacts

Max. 18

Type of taping

Tape I

A

B

C

D

E

F

Quantity per reel

3,000

16.0

24.0

32.0

—

7.5

8.0

17.5

25.5

33.5

φ380

Common for socket and header:

1.5 mm, 2.0 mm, 2.5 mm, and 3.0 mm

20 to 70

Tape I

11.5

14.2

3,000

80 to 100

Tape II

28.4

3,000

2. With Retention Fitting

Mated height

Number of contacts

Max. 18

20 to 60

70 to 90

100

Type of taping

Tape I

A

B

C

D

E

F

Quantity per reel

3,000

16.0

24.0

32.0

44.0

16.0

24.0

32.0

44.0

—

7.5

8.0

17.5

25.5

33.5

45.5

17.5

25.5

33.5

45.5

φ380

Common for socket and header:

1.5 mm, 2.0 mm, 2.5 mm, and 3.0 mm

Header: 4.0 mm

Tape I

—

11.5

14.2

20.2

7.5

3,000

Tape II

Tape I

28.4

40.4

—

3,000

Max. 18

20 to 60

70 to 90

100

2,000

Tape I

—

11.5

14.2

20.2

2,000

Socket: 4.0 mm

Tape II

28.4

40.4

2,000

3. Connector orientation with respect to direction of progress of embossed tape

1) No retention ﬁtting

Type

Common for P4

Header

Direction of

tape progress

Socket

Note: There is no indication on this product regarding top-bottom or left-right orientation.

2) With retention ﬁtting

Type

Common for P4

Header

Direction of

tape progress

Socket

Note: There is no indication on this product regarding top-bottom or left-right orientation.

AXK7, 8

Narrow Pitch Connector P4 (0.4 mm pitches) for Inspection Usage

CONNECTOR FOR INSPECTION USAGE APPLICATIONS

WITH 3,000 INSERTION AND REMOVAL TIMES

TABLE OF PRODUT TYPES

✩: Available for sale

P4 for

inspection

with fitting

Product

name

P4 for

inspection

Socket

Header

Mated

height

FEATURES

1.5mm

1. 3,000 insertion and removals (when

as recommended)

10

12

14

16

20

22

24

26

30

34

36

40

42

44

46

50

54

60

70

80

90

100

✩

From the 50 insertion and removals of

standard type, up to 3,000 insertion and

removals (with recommended insertion

and removal) are possible for use in

inspection.

Ideal for inspection of module units and

inspection during the device assembly

process

2. Same external dimensions and foot

pattern as standard type.

Since shape is the same as standard

type, inspection is possible without

interfering with devices in the vicinity of

standard connectors.

✩

3. Easier to mate

Due to the simplicity of the locking

mechanism less mating force is required

for insertion and removal.

(Connector is intended for inspection

purposes mating strength is not good

enough for applications with strong shock

and vibration)

✩

Notes:

1. You can use with each mated height in common.

2. Please inquire about numbers of contacts other than those given above.

3. Please inquire with us regarding delivery times.

4. Please keep the minimum unit for ordering no less than 50 pieces per lot.

5. Please inquire for further information.

AXK7, 8

NOTES

Recommended metal mask pattern

1. As shown below, excess force

during insertion may result in damage

to the connector or removal of the

solder. Please be careful. Also, to

prevent connector damage please

conﬁrm the correct position before

mating connectors.

1) No retention ﬁtting

Socket

Recommended PC board pattern (TOP VIEW)

Metal mask thickness: Here, 120 µm

(Opening area ratio: 40 %)

0.40 0.01

0.40 0.05

0.23 0.03

0.35 0.01

0.10 0.01

0.20 0.01

0.115 0.05

0.40 0.05

2) With retention ﬁtting

2. Keep the PC board warp no more

than 0.03 mm in relation to the overall

length of the connector.

Socket

Recommended metal mask pattern

Recommended PC board pattern

Metal mask thickness: Here, 150 µm

(Mount pad arrangement pattern)

(Opening area ratio: 40 %)

0.40 0.05

0.23 0.03

0.40 0.05

0.115 0.05

0.40 0.01

0.35 0.01

0.20 0.01

0.10 0.01

Max. 0.03 mm

3. PC Boards and Recommended

Metal Mask Patterns

Connectors are mounted with high

density, with a pitch interval of 0.4 to 0.5

mm.

In order to reduce solder bridge and

other issues make sure the proper levels

of solder are used.

0.80 0.05

2.15 0.05

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Terminal portion opening area ratio: 32 %)

(Metal portion opening area ratio: 65 %)

Metal mask thickness: Here, 120 µm

(Opening area ratio: 50 %)

The ﬁgures to the right are recommended

metal mask patterns.

Please use them as a reference.

0.40 0.01

0.20 0.01

0.35 0.01

0.10 0.01

0.35 0.01

0.20 0.01

0.10 0.01

0.72 0.01

2.15 0.01

Header

Recommended PC board pattern (TOP VIEW)

Recommended metal mask pattern

Metal mask thickness: Here, 120 µm

(Terminal portion opening area ratio: 40 %)

(Metal portion opening area ratio: 80 %)

0.40 0.05

0.23 0.03

0.40 0.05

0.40 0.01

0.20 0.01

0.35 0.01

0.10 0.01

0.115 0.05

0.40 0.05

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

0.58 0.01

2.15 0.01

(Opening area ratio: 32 %)

0.40 0.01

2.15 0.01

0.35 0.01

0.10 0.01

0.20 0.01

AXK7, 8

Header

Recommended PC board pattern

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Terminal portion opening area ratio: 40 %)

(Metal portion opening area ratio: 65 %)

Metal mask thickness: Here, 120 µm

(Terminal portion opening area ratio: 50 %)

(Metal portion opening area ratio: 80 %)

(Mount pad arrangement pattern)

0.40 0.05

0.23 0.03

0.115 0.05

0.40 0.01

0.35 0.01

0.10 0.01

0.20 0.01

0.10 0.01

0.80 0.05

0.82 0.05

0.72 0.01

0.82 0.01

0.58 0.01

0.82 0.01

For other details, please verify with the

product speciﬁcation sheets.

Regarding Sample Orders To Conﬁrm Proper Mounting

When ordering samples to conﬁrm

proper mounting with the placement

machine, connectors are delivered in 50-

piece units in the condition given right.

Consult a sale representative for ordering

sample units.

Condition when delivered from factory

Embossed tape

amount required

for the mounting

Required number of products

for sample production

(Unit 50 pieces)

Reel

(Delivery can also be made on a reel by customer request.)

AXK7, 8L

ProductTypes For Narrow Pitch Connectors

F4 (0.4 mm pitch)

P4 (0.4 mm pitch)...No retention ﬁtting type

P4 (0.4 mm pitch)...With retention ﬁtting type

✩: Available for sale

Mated

height

0.9mm

Mated

height

Mated

height

4.0mm

3.5mm

3.0mm

2.5mm

2.0mm

1.5mm

10

16

20

22

24

26

28

30

32

34

36

38

40

44

50

54

60

70

80

✩

14

✩

10

✩

16

20

22

24

26

28

30

32

34

36

38

40

42

44

50

54

60

64

70

80

90

100

12

20

22

30

34

40

44

46

50

60

80

90

100

✩*

✩

Notes:

1. Please contact us regarding numbers of contacts other

than those given above.

2. * Header comes with no positioning bosses.

✩

P5KL, P5KF, P5K, and P5KS (common for 0.5 mm pitch)

P5KL

P5KF

P5K

P5KS

✩: Available for sale

Product name P5KL

P5KF

2.0mm

P5K

P5KS

9.0mm

8.0mm

7.0mm

6.5mm

Mated

height

6.0mm

5.5mm

5.0mm

4.5mm

4.0mm

3.5mm

3.0mm

2.5mm

1.5mm

1.2mm

10

12

✩

14

16

18

20

✩

22

24

26

30

✩

32

34

✩

36

✩

40

✩

50

60

70

80

100

120

130

160

✩

Note: Please contact us regarding numbers of contacts other than those given above.

AXK7, 8

P6S (0.6 mm pitch)

Floating type (0.5 mm pitch)

✩: Available for sale

9.0mm

8.0mm

7.0mm

Mated

height

Mated

5.0mm

height

6.0mm

5.0mm

4.0mm

20

✩

20

30

✩

30

40

50

60

80

100

Note: Please contact us regarding numbers of contacts other

than those given above.

P8 (0.8 mm pitch)

P10 (1.0 mm pitch)

✩: Available for sale

14.0mm

13.0mm

11.5mm

Mated

height

Mated

height

8.0mm

7.0mm

2.5mm

2.0mm

6.0mm

5.5mm

5.0mm

4.5mm

4.0mm

3.5mm

3.0mm

10

16

20

30

✩

12

✩

14

16

20

22

24

26

30

34

40

50

60

80

90

100

✩

Note: Please contact us regarding numbers of contacts other than those given above.


型号：	AXK744125G
厂家：	PANASONIC
描述：	Board Stacking Connector, 44 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, 连接器
文件：	总12页 (文件大小：848K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AXK744125G [PANASONIC]

相关型号：

AXK744127G

AXK744145G

AXK744147G

AXK744347G

AXK746125G

AXK746127G

AXK750125G

AXK750127G

AXK750145G

AXK750145J

AXK750145V

AXK750147G