AXK720427G [PANASONIC]
Board Stacking Connector, 20 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT;型号: | AXK720427G |
厂家: | PANASONIC |
描述: | Board Stacking Connector, 20 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT 连接器 |
文件: | 总15页 (文件大小:805K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Automation Controls Catalog
For board-to-board For board-to-FPC
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors
(0.4mm pitch)
P4 Series
FEATURES
1. 0.4 mm pitch and mated heights of
1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 3.5
mm, and 4.0 mm.
2) Guides are provided to take up any
position shift and facilitate insertion.
• Without soldering terminals
2. Strong resistance to adverse
environments! Utilizes
Insertion guide
“
” construction
for high contact reliability.
Socket
Header
3. Constructed with impact dispersion
keys inside the body to disperse
shocks when dropped.
• With soldering terminals
Impact dispersion key
Socket
3) Simple lock structure provides tactile
feedback to ensure excellent mating/
unmating operation feel.
Socket
Header
Header side
contact
Simple lock
Socket side
mechanism
contact
RoHS compliant
Header
A high level of shock resistance is
ensured by dispersing impact over the
four locations where the socket
indentations and header protrusions are
mated together.
5. Design facilitates efficient
mounting.
Features a terminal flatness of 0.08 mm,
construction resistant to creeping flux,
and design that allows visual inspection
of the soldered part.
Note: The following number of pins are not supported
due to suction surface factors.
• Without soldering terminals:
18 pin contacts or less
• With soldering terminals:
6. Connectors for inspection available
22 pin contacts or less
4. Construction makes designing
devices easier.
1) The lower connector bottom surface
construction prevents contact and shorts
between the PCB and metal terminals.
This enables freedom in pattern wiring,
helping to make PCB’s smaller.
APPLICATIONS
Mobile devices, such as cellular
phones, digital still cameras and
digital video cameras.
<Socket>
<Header>
Connector bottom: Create any thru-hole and pattern wiring.
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
2013.09
–1–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
ORDERING INFORMATION
AXK
G
7: Narrow Pitch Connector P4 (0.4 mm pitch) Socket
8: Narrow Pitch Connector P4 (0.4 mm pitch) Header
Number of pins (2 digits)
Mated height
<Socket>
1: For mated height 1.5 mm
2: For mated height 2.0 mm
3: For mated height 2.5 mm and 3.0 mm
4: For mated height 3.5 mm
5: For mated height 4.0 mm
<Header>
1: For mated height 1.5 mm, 2.0 mm and 2.5 mm
2: For mated height 3.0 mm, 3.5 mm and 4.0 mm
Functions
2: With soldering terminals, without positioning bosses
4: Without soldering terminals, without positioning bosses
Surface treatment (Contact portion / Terminal portion)
<Socket>
7: Ni plating on base, Au plating on surface (for Ni barrier available)
<Header>
5: Ni plating on base, Au plating on surface
Other specifications
<Header>
W: V notch and post edge horseshoe bend type product
Packing
∗
G: 3,000 pieces embossed tape and plastic reel × 2
Notes: 1. Only a socket of mated height 3.5 mm and 4.0 mm: 2,000 pieces embossed tape and plastic reel × 2.
2. Please note that the models with a soldering terminals (8th digit of part number is “2”) and those without a soldering terminals (8th digit of part number is “4”)
are shaped differently and are not compatible.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–2–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
※ Part numbers in brackets will not be discontinued because
PRODUCT TYPES
they share a different mating height with other products.
1. Without soldering terminals
Part number
Packing
Mated height
Number of pins
Socket
Header
Inner carton
Outer carton
14
16
20
22
24
26
28
30
34
36
40
42
44
50
54
60
64
70
80
90
100
14
20
24
26
30
34
38
40
50
54
60
70
80
100
14
20
24
30
34
40
44
50
60
70
80
90
100
20
24
30
40
50
60
80
100
20
30
40
24
AXK714147G
AXK716147G
AXK720147G
AXK722147G
AXK724147G
AXK726147G
AXK728147G
AXK730147G
AXK734147G
AXK736147G
AXK740147G
AXK742147G
AXK744147G
AXK750147G
AXK754147G
AXK760147G
AXK764147G
AXK770147G
AXK780147G
AXK790147G
AXK700147G
AXK714247G
AXK720247G
AXK724247G
AXK726247G
AXK730247G
AXK734247G
AXK738247G
AXK740247G
AXK750247G
AXK754247G
AXK760247G
AXK770247G
AXK780247G
AXK700247G
AXK714347G
AXK720347G
AXK724347G
AXK730347G
AXK734347G
AXK740347G
AXK744347G
AXK750347G
AXK760347G
AXK770347G
AXK780347G
AXK790347G
AXK700347G
AXK720347G
AXK724347G
AXK730347G
AXK740347G
AXK750347G
AXK760347G
AXK780347G
AXK700347G
AXK720447G
AXK730447G
AXK740447G
AXK724547G
AXK814145WG
AXK816145WG
AXK820145WG
AXK822145WG
AXK824145WG
AXK826145WG
AXK828145WG
AXK830145WG
AXK834145WG
AXK836145WG
AXK840145WG
AXK842145WG
AXK844145WG
AXK850145WG
AXK854145WG
AXK860145WG
AXK864145WG
AXK870145WG
AXK880145WG
AXK890145WG
AXK800145WG
AXK814145WG
AXK820145WG
AXK824145WG
AXK826145WG
AXK830145WG
※(AXK834145WG)
AXK838145WG
AXK840145WG
AXK850145WG
※(AXK854145WG)
AXK860145WG
AXK870145WG
AXK880145WG
※(AXK800145WG)
AXK814145WG
AXK820145WG
AXK824145WG
AXK830145WG
※(AXK834145WG)
AXK840145WG
※(AXK844145WG)
AXK850145WG
AXK860145WG
AXK870145WG
AXK880145WG
AXK890145WG
※(AXK800145WG)
AXK820245WG
AXK824245WG
AXK830245WG
AXK840245WG
AXK850245WG
AXK860245WG
AXK880245WG
AXK800245WG
AXK820245WG
AXK830245WG
AXK840245WG
※(AXK824245WG)
1.5 mm
2.0 mm
3,000 pieces
6,000 pieces
2.5 mm
3.0 mm
3.5 mm
4.0 mm
Socket: 2,000 pieces
Header: 3,000 pieces
Socket: 4,000 pieces
Header: 6,000 pieces
Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units.
Samples for mounting confi mation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confi m proper mounting” on page 169.)
Samples: Small lot orders are possible.
2. The above part numbers are for connectors without positioning bosses, which are standard.When ordering connectors with positioning bosses, please contact our
sales offic .
3. Different number of pins are available on-demand production only. Please contact us for more details.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–3–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
※ Part numbers in brackets will not be discontinued because
they share a different mating height with other products.
2. With soldering terminals
Part number
Packing
Mated height
Number of pins
Socket
Header
Inner carton
Outer carton
10
12
20
22
24
28
30
34
36
40
44
46
50
60
80
90
100
20
24
30
34
40
50
60
80
12
20
28
32
36
40
50
60
80
90
20
36
40
50
60
70
80
90
20
30
40
50
60
70
80
34
42
50
80
90
AXK710127G
AXK712127G
AXK720127G
AXK722127G
AXK724127G
AXK728127G
AXK730127G
AXK734127G
AXK736127G
AXK740127G
AXK744127G
AXK746127G
AXK750127G
AXK760127G
AXK780127G
AXK790127G
AXK700127G
AXK720227G
AXK724227G
AXK730227G
AXK734227G
AXK740227G
AXK750227G
AXK760227G
AXK780227G
AXK712327G
AXK720327G
AXK728327G
AXK732327G
※(AXK736327G)
AXK740327G
AXK750327G
※(AXK760327G)
※(AXK780327G)
AXK790327G
AXK720327G
AXK736327G
※(AXK740327G)
AXK750327G
AXK760327G
AXK770327G
AXK780327G
AXK790327G
AXK720427G
AXK730427G
AXK740427G
AXK750427G
AXK760427G
AXK770427G
AXK780427G
AXK734527G
AXK742527G
AXK750527G
AXK780527G
AXK790527G
AXK810125WG
※(AXK812125WG)
※(AXK820125WG)
AXK822125WG
AXK824125WG
AXK828125WG
AXK830125WG
AXK834125WG
AXK836125WG
AXK840125WG
AXK844125WG
AXK846125WG
AXK850125WG
AXK860125WG
AXK880125WG
AXK890125WG
AXK800125WG
※(AXK820125WG)
AXK824125WG
AXK830125WG
AXK834125WG
※(AXK840125WG)
AXK850125WG
AXK860125WG
AXK880125WG
AXK812125WG
AXK820125WG
AXK828125WG
AXK832125WG
AXK836125WG
AXK840125WG
AXK850125WG
AXK860125WG
AXK880125WG
AXK890125WG
AXK820225WG
AXK836225WG
AXK840225WG
AXK850225WG
AXK860225WG
AXK870225WG
AXK880225WG
AXK890225WG
※(AXK820225WG)
AXK830225WG
AXK840225WG
AXK850225WG
AXK860225WG
AXK870225WG
AXK880225WG
AXK834225WG
AXK842225WG
AXK850225WG
※(AXK880225WG)
AXK890225WG
1.5 mm
2.0 mm
2.5 mm
3.0 mm
3,000 pieces
6,000 pieces
Socket: 2,000 pieces
Header: 3,000 pieces
Socket: 4,000 pieces
Header: 6,000 pieces
3.5 mm
4.0 mm
Socket: 2,000 pieces
Header: 3,000 pieces
Socket: 4,000 pieces
Header: 6,000 pieces
Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units.
Samples for mounting confi mation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confi m proper mounting” on page 169.)
Samples: Small lot orders are possible.
2. The above part numbers are for connectors without positioning bosses, which are standard.When ordering connectors with positioning bosses, please contact our
sales offic .
3. Different number of pins are available on-demand production only. Please contact us for more details.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–4–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
SPECIFICATIONS
1. Characteristics
Item
Specification
Conditions
Rated current
0.3A/pin contact (Max. 5 A at total pin contacts)
60V AC/DC
Rated voltage
Electrical
characteristics
Breakdown voltage
Insulation resistance
150V AC for 1 min.
Detection current: 1mA
Min. 1,000MΩ (initial)
Using 250V DC megger (applied for 1 min.)
Based on the contact resistance measurement method
specified y JIS C 5402.
Contact resistance
Max. 70mΩ
Composite insertion force
Max. 0.981N {100gf}/pin contacts × pin contacts (initial)
Min. 0.0588N {6gf}/pin contacts × pin contacts
(Mated height 1.5 mm without soldering terminals type)
Min. 0.118N {12gf}/pin contacts × pin contacts
All the other types except the above
Mechanical
characteristics
Composite removal force
(Mated height 1.5 mm without soldering terminals type)
Measuring the maximum force.
As the contact is axially pull out.
Post holding force
Min. 0.981N {100gf}/pin contacts
Ambient temperature
–55°C to +85°C
Max. peak temperature of 260°C (on the surface of the
PC board around the connector terminals)
No freezing at low temperatures
Infrared refl w soldering
Soldering iron
Soldering heat resistance
Storage temperature
300°C within 5 sec. 350°C within 3 sec.
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
No freezing at low temperatures.
No dew condensation.
Conformed to MIL-STD-202F, method 107G
Order Temperature (°C) Time (minutes)
0
1
2
3
4
–55−3
30
Max. 5
30
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
Thermal shock resistance
(header and socket mated)
85+3
Environmental
characteristics
0
Max. 5
0
–55−3
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
Humidity resistance
(header and socket mated)
Bath temperature 40 2°C,
humidity 90 to 95% R.H.
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
Saltwater spray resistance
(header and socket mated)
Bath temperature 35 2°C,
saltwater concentration 5 1%
Bath temperature 40 2°C,
gas concentration 3 1 ppm,
humidity 75 to 80% R.H.
H2S resistance
(header and socket mated)
48 hours,
contact resistance max. 70mΩ
Lifetime
characteristics
Repeated insertion and removal speed of max. 200
times/hours
Insertion and removal life
50 times
Mated height 1.5mm, 20 pin contacts;
Socket: 0.04g Header: 0.02g
Unit weight
2. Material and surface treatment
Part name
Material
Surface treatment
—
Molded portion
LCP resin (UL94V-0)
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
However, upper terminal of Ni barrier production: Exposed over Ni
Contact and Post
Copper alloy
The area adjacent to the terminal of the sockets on models with Ni barrier is exposed to Ni on base.
Soldering terminals portion
Copper alloy
Ni plating on base, Sn plating on surface (Except for front terminal)
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–5–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (Unit: mm)
Dimension table (mm)
Number of pins/
1. Without Soldering Terminals
Socket (Mated height: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm and 4.0 mm)
A
B
C
D
dimension
CAD Data
14
5.1
5.5
2.4
2.8
—
—
2.8
3.2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
16
20
6.3
3.6
1.6
2.0
2.4
2.8
3.2
3.6
4.4
4.8
5.2
5.6
6.0
6.4
7.6
8.4
9.6
10.4
11.6
13.6
15.6
17.6
A
B 0.1
22
6.7
4.0
24
7.1
4.4
26
7.5
4.8
0.40 0.05
28
7.9
5.2
0.08
0.40 0.05
0.15 0.03
30
8.3
5.6
34
9.1
6.4
E
36
9.5
6.8
38
9.9
7.2
40
10.3
10.7
11.1
12.3
13.1
14.3
15.1
16.3
18.3
20.3
22.3
7.6
42
8.0
44
8.4
50
9.6
0.80
0.80
54
10.4
11.6
12.4
13.6
15.6
17.6
19.6
C
60
64
70
80
90
100
Max. 18 pin contacts
Mated height/dimension
1.5mm
E
1.50
1.92
2.42
2.92
3.42
2.0mm
2.5mm, 3.0mm
3.5mm
D
4.0mm
General tolerance: 0.2
Dimension table (mm)
Header (Mated height: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm and 4.0 mm)
Number of pins/
A
CAD Data
B
C
D
dimension
14
16
20
22
24
26
28
30
34
36
38
40
42
44
50
54
60
64
70
80
90
100
3.9
2.4
2.8
—
—
3.04
3.44
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
A
4.3
5.1
B 0.1
3.6
1.6
2.0
2.4
2.8
3.2
3.6
4.4
4.8
5.2
5.6
6.0
6.4
7.6
8.4
9.6
10.4
11.6
13.6
15.6
17.6
0.08
5.5
4.0
0.40 0.05
5.9
4.4
0.40 0.05
0.15 0.03
6.3
4.8
E
6.7
5.2
7.1
5.6
7.9
6.4
8.3
6.8
8.7
7.2
9.1
7.6
0.76
0.76
9.5
8.0
0.10 0.03
C
9.9
8.4
11.1
11.9
13.1
13.9
15.1
17.1
19.1
21.1
9.6
10.4
11.6
12.4
13.6
15.6
17.6
19.6
Max. 18 pin contacts
Mated height/dimension
1.5mm, 2.0mm, 2.5mm
3.0mm, 3.5mm, 4.0mm
E
F
1.31
2.26
1.20
1.26
D
General tolerance: 0.2
Socket and Header are mated
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–6–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
2. With Soldering Terminals
Socket (Mated height: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm and 4.0mm)
Dimension table (mm)
Number of pins/
dimension
A
B
C
D
E
CAD Data
10
12
20
22
24
28
30
32
34
36
40
42
44
46
50
60
70
80
90
100
5.90
6.30
1.60
2.00
3.60
4.00
4.40
5.20
5.60
6.00
6.40
6.80
7.60
8.00
8.40
8.80
9.60
—
4.60 2.00
5.00 2.40
6.60 2.40
7.00 2.80
—
7.90
—
A
8.30
—
0.08
B 0.1
8.70
1.60
2.40
2.80
3.20
3.60
4.00
7.40
8.20
8.60
9.00
9.40
9.40
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.40 0.05
0.15 0.03
F
9.50
9.90
10.30
10.70
11.10
11.90
12.30
12.70
13.10
13.90
4.80 10.60
5.20 11.00
5.60 11.40
6.00 11.80
6.80 12.60
8.80 14.60
Soldering
terminals
0.80
0.80
C
D
0.10 0.03
15.90 11.60
17.90 13.60 10.80 16.60
19.90 15.60 12.80 18.60
21.90 17.60 14.80 20.60
23.90 19.60 16.80 22.60
0.50
10 and 12 pin contacts 20 and 22 pin contacts
Mated height/dimension
1.5mm
F
1.50
1.92
2.42
2.92
3.42
2.0mm
2.5mm, 3.0mm
3.5mm
E
E
4.0mm
General tolerance: 0.2
Header (Mated height: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm and 4.0mm)
CAD Data
Dimension table (mm)
Number of pins/
A
B
C
D
E
dimension
A
10
12
20
22
24
28
30
32
34
36
40
42
44
46
50
60
70
80
90
100
3.10
1.60
2.00
3.60
4.00
4.40
5.20
5.60
6.00
6.40
6.80
7.60
8.00
8.40
8.80
9.60
—
1.94 1.64
2.34 2.04
3.94 2.80
4.34 3.20
B 0.1
3.50
5.10
5.50
5.90
6.70
7.10
7.50
7.90
8.30
9.10
9.50
9.90
10.30
11.10
—
0.08
0.40 0.05
—
0.40 0.05
—
F
0.15 0.03
1.60
2.40
2.80
3.20
3.60
4.00
4.80
5.20
5.60
6.00
6.80
4.74
5.54
5.94
6.34
6.74
7.14
7.94
8.34
8.74
9.14
9.94
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.76
0.10 0.03
C
D
Soldering terminals
13.10 11.60
8.80 11.94
15.10 13.60 10.80 13.94
17.10 15.60 12.80 15.94
19.10 17.60 14.80 17.94
21.10 19.60 16.80 19.94
10 and 12 pin contacts 20 and 22 pin contacts
Mated height/dimension
1.5mm, 2.0mm, 2.5mm
3.0mm, 3.5mm, 4.0mm
F
G
1.31
2.26
1.20
1.26
E
E
General tolerance: 0.2
Socket and Header are mated.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–7–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
EMBOSSED TAPE DIMENSIONS (unit: mm, Common for respective contact type, socket and header)
• Tape dimensions (Conforming to JIS C 0806-1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
• Plastic reel dimensions (Conforming to EIAJ ET-7200B)
Tape I
Tape II
A 0.3
Taping reel
A 0.3
D 1
C
B
1.75
1.75
Top cover tape
C
Embossed carrier tape
4
2
4
2
Embossed mounting-hole
8.0
8.0
1.5+0.1 dia.
1.5+0.1 dia.
0
0
Dimension table (mm)
1. Without Soldering Terminals
Number of pins
Mated height
Type of taping
A
B
C
D
Quantity per reel
Socket
Header
Max. 18
20 to 70
Max. 18
20 to 70
Tape I
Tape I
Tape II
Tape II
Tape I
16.0
24.0
32.0
44.0
24.0
—
—
7.5
11.5
14.2
20.2
11.5
17.4
25.4
33.4
45.4
25.4
3,000
3,000
3,000
3,000
2,000
Common for socket and header:
1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm
Header: 3.5mm and 4.0 mm
80 to 100 80 to 100
80 to 100
20 to 40
28.4
40.4
—
—
Socket: 3.5mm and 4.0 mm
2. With Soldering Terminals
Mated height
Number of pins
Type of taping
A
B
C
D
Quantity per reel
Socket
Header
Max. 18
20 to 70
80 to 100
—
Max. 18
20 to 60
70 to 90
100
Tape I
Tape I
Tape II
Tape II
Tape I
Tape II
16.0
24.0
32.0
44.0
24.0
32.0
—
—
7.5
11.5
14.2
20.2
11.5
14.2
17.4
25.4
33.4
45.4
25.4
33.4
3,000
3,000
3,000
3,000
2,000
2,000
Common for socket and header:
1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm
Header: 3.5mm and 4.0 mm
28.4
40.4
—
20 to 60
70 to 90
Socket: 3.5mm and 4.0 mm
28.4
3. Connector orientation with respect to direction of progress of embossed tape
1) Without soldering terminals
Type
Common for P4
Direction of
tape progress
Socket
Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.
2) With soldering terminals
Type
Common for P4
Header
Direction of
tape progress
Socket
Note: There is no indication on this product regarding top-bottom or left-right orientation.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–8–
For board-to-board For board-to-FPC
Partly To Be Discontinued
Last time buy:September 30, 2013
Connectors for
inspection usage
(0.4mm pitch)
P4 Series
FEATURES
APPLICATIONS
1. 3,000 mating and unmating cycles
2. Same external dimensions and foot
pattern as standard type.
Ideal for module unit inspection and
equipment assembly inspection
3. Improved mating
Socket
Header
Insertion and removal easy due to a
reduction in mating retention force. This
is made possible by a simple locking
structure design.
Note: Mating retention force cannot be
warranted.
RoHS compliant
TABLE OF PRODUCT TYPES
✩: Available for sale
Number of pins
Product name
10 12 14 16 20 22 24 26 28 30 34 36 40 42 44 46 50 54 60 64 70 80 90 100
P4 for inspection
without soldering terminals
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
P4 for inspection
with soldering terminals
✩
✩
✩
Notes: 1. You can use with each mated height in common.
2. Please inquire about number of pins other than those shown above.
3. Please inquire with us regarding availability.
4. Please keep the minimum order quantities no less than 50 pieces per lot.
5. Please inquire if further information is needed.
PRODUCT TYPES
Specification
Part No.
Specification
Part No.
With soldering
terminals
With soldering
terminals
Without positioning bosses
Without positioning bosses
AXK7E∗∗26G
Without positioning bosses
Without positioning bosses
AXK8E∗∗26WG
AXK8E∗∗46WG
Socket
Header
Without soldering
terminals
Without soldering
terminals
AXK7E∗∗46G
Notes: 1. When placing an order, substitute the “∗” (asterisk) in the above part number with the number of pins for the specific connecto .
2. The above part numbers are for connectors without positioning bosses, which are standard.When ordering connectors with positioning bosses, please contact our
local sales offic .
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–9–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
NOTES
1. As shown below, excess force
during insertion may result in damage
to the connector or removal of the
solder. Also, to prevent connector
damage please confirm the correct
position before mating connectors.
1) Without soldering terminals
Socket
Recommended PC board pattern (TOP VIEW)
Header
Recommended PC board pattern (TOP VIEW)
0.40 0.05
0.23 0.03
0.40 0.05
0.40 0.05
0.40 0.05
0.23 0.03
0.115 0.05
0.40 0.05
0.115 0.05
0.40 0.05
2. Keep the PC board warp no more
than 0.03 mm in relation to the overall
length of the connector.
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
Metal mask thickness: Here, 150 µm
(Opening area ratio: 40%)
(Opening area ratio: 32%)
0.40 0.01
0.35 0.01
0.40 0.01
0.20 0.01
0.10 0.01
0.35 0.01
0.10 0.01
0.20 0.01
Max. 0.03 mm
Max. 0.03 mm
3. Recommended PC board and metal
mask patterns
Connectors are mounted with high pitch
density, intervals of 0.35 mm, 0.4 mm or
0.5 mm.
In order to reduce solder bridges and
other issues make sure the proper levels
of solder is used.
The figures to the right are recommended
metal mask patterns. Please use them as
a reference.
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
Metal mask thickness: Here, 120 µm
(Opening area ratio: 40%)
(Opening area ratio: 50%)
0.40 0.01
0.35 0.01
0.40 0.01
0.20 0.01
0.10 0.01
0.35 0.01
0.10 0.01
0.20 0.01
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–10–
Partly To Be Discontinued
Last time buy:September 30, 2013
Narrow pitch connectors P4 (0.4mm pitch)
2) With soldering terminals
Socket
Header
Please refer to the latest product
Recommended PC board pattern (TOP VIEW)
Recommended PC board pattern (TOP VIEW)
specifications when designing our
product.
0.40 0.05
0.40 0.05
0.40 0.05
0.23 0.03
0.40 0.05
0.115 0.05
0.23 0.03
0.115 0.05
0.80 0.05
2.15 0.05
0.80 0.05
0.82 0.05
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Terminal portion opening area ratio: 40%)
(Metal portion opening area ratio: 65%)
Metal mask thickness: Here, 150 µm
(Terminal portion opening area ratio: 32%)
(Metal portion opening area ratio: 65%)
0.40 0.01
0.20 0.01
0.35 0.01
0.10 0.01
0.40 0.01
0.35 0.01
0.10 0.01
0.20 0.01
0.58 0.01
2.15 0.01
0.58 0.01
0.82 0.01
0.82 0.01
2.15 0.01
Recommended metal mask pattern
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Terminal portion opening area ratio: 50%)
(Metal portion opening area ratio: 80%)
Metal mask thickness: Here, 120 µm
(Terminal portion opening area ratio: 40%)
(Metal portion opening area ratio: 80%)
0.40 0.01
0.20 0.01
0.35 0.01
0.10 0.01
0.40 0.01
0.35 0.01
0.10 0.01
0.20 0.01
0.72 0.01
0.82 0.01
0.72 0.01
2.15 0.01
0.82 0.01
2.15 0.01
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB62E 201309-T
–11–
Notes on Using Narrow pitch Connectors
Regarding the design of devices and PC board patterns
1) When connecting several connectors
together by stacking, make sure to
maintain proper accuracy in the design of
structure and mounting equipment so
that the connectors are not subjected to
twisting and torsional forces.
5) For all connectors of the narrow pitch
series, to prevent the PC board from
coming off during vibrations or impacts,
and to prevent loads from falling directly
on the soldered portions, be sure to
design some means to fix the PC board
in place.
backside of the FPC board to which the
connector is being connected. Please
make the reinforcement board
dimensions bigger than the outer limits of
the recommended PC board pattern
(should be approximately 1 mm greater
than the outer limit).
2) With mounting equipment, there may
be up to a 0.2 to 0.3-mm error in
positioning. Be sure to design PC boards
and patterns while taking into
Example) Secure in place with screws
Material should be glass epoxy or
polyimide, and the thickness should be
between 0.2 and 0.3 mm.
Screw
consideration the performance and
abilities of the required equipment.
3) Some connectors have tabs embossed
on the body to aid in positioning. When
using these connectors, make sure that
the PC board is designed with positioning
holes to match these tabs.
4) To ensure the required mechanical
strength when soldering the connector
terminals, make sure the PC board
meets recommended PC board pattern
design dimensions given.
(2) Collisions, impacts, or turning of FPC
boards, may apply forces on the
connector and cause it to come loose.
Therefore, make to design retaining
plates or screws that will fix the connector
in place.
7) The narrow pitch connector series is
designed to be compact and thin.
Although ease of handling has been
taken into account, take care when
mating the connectors, as displacement
or angled mating could damage or
deform the connector.
Connector
Spacer
Spacer
PC board
When connecting PC boards, take
appropriate measures to prevent the
connector from coming off.
6) Notes when using a FPC.
(1) When the connector is soldered to an
FPC board, during its insertion and
removal procedures, forces may be
applied to the terminals and cause the
soldering to come off. It is recommended
to use a reinforcement board on the
Regarding the selection of the connector placement machine and the mounting
procedures
1) Select the placement machine taking
into consideration the connector height,
required positioning accuracy, and
packaging conditions.
2) Be aware that if the catching force of
the placement machine is too great, it
may deform the shape of the connector
body or connector terminals.
3) Be aware that during mounting,
external forces may be applied to the
connector contact surfaces and terminals
and cause deformations.
4) Depending on the size of the
6) Excessive mounter chucking force may
deform the molded or metal part of the
connector. Consult us in advance if
chucking is to be applied.
connector being used, self alignment
may not be possible. In such cases, be
sure to carefully position the terminal with
the PC board pattern.
5) The positioning bosses give an
approximate alignment for positioning on
the PC board. For accurate positioning of
the connector when mounting it to the PC
board, we recommend using an
automatic positioning machine.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB48E 201303-T
–12–
Notes on Using Narrow pitch Connectors
Regarding soldering
1. Reflow soldering
Soldering conditions
2. Hand soldering
1) Measure the recommended profile
temperature for reflow soldering by
placing a sensor on the PC board near
the connector surface or terminals. (The
setting for the sensor will differ depending
on the sensor used, so be sure to
carefully read the instructions that comes
with it.)
Please use the reflow temperature profile
conditions recommended below for
reflow soldering. Please contact us
before using a temperature profile other
than that described below (e.g. lead-free
solder).
1) Set the soldering iron so that the tip
temperature is less than that given in the
table below.
Table A
Product name
Soldering iron temperature
300°C within 5 sec.
350°C within 3 sec.
SMD type connectors
• Narrow pitch connectors
(except P8 type)
2) As for cream solder printing, screen
printing is recommended.
2) Do not allow flux to spread onto the
connector leads or PC board. This may
lead to flux rising up to the connector
inside.
3) Touch the soldering iron to the foot
pattern. After the foot pattern and
connector terminal are heated, apply the
solder wire so it melts at the end of the
connector terminals.
Upper limited (Solder heat resistance)
Lower limited (Solder wettability)
Temperature
3) To determine the relationship between
the screen opening area and the PC-
board foot pattern area, refer to the
diagrams in the recommended patterns
for PC boards and metal masks. Make
sure to use the terminal tip as a reference
position when setting. Avoid an excessive
amount of solder from being applied,
otherwise, interference by the solder will
cause an imperfect contact.
Peak temperature
Peak temperature 260°C
230°C
220°C
200°C
Preheating
60 to 120 sec.
180°C
150°C
25 sec.
70 sec.
Time
• Narrow pitch connector (P8)
Temperature
Apply the solder
wire here
Peak temperature
245°C max.
200°C
Preheating
155 to 165°C
Terminal
Terminal
Paste
Small angle as
60 to 120 sec.
possible up to
45 degrees
Within 30 sec.
Time
solder
PC board
foot pattern
PC board
For products other than the ones above,
please refer to the latest product
specifications.
7) The temperatures are measured at the
surface of the PC board near the
connector terminals. (The setting for the
sensor will differ depending on the sensor
used, so be sure to carefully read the
instructions that comes with it.)
8) The temperature profiles given in this
catalog are values measured when using
the connector on a resin-based PC
board. When performed reflow soldering
on a metal board (iron, aluminum, etc.) or
a metal table to mount on a FPC, make
sure there is no deformation or
discoloration of the connector beforehand
and then begin mounting.
9) Consult us when using a screen-
printing thickness other than that
recommended.
10) Some solder and flux types may
cause serious solder or flux creeping.
Solder and flux characteristics should be
taken into consideration when setting the
reflow soldering conditions.
Pattern
4) Consult us when using a screen-
printing thickness other than that
recommended.
5) When mounting on both sides of the
PC board and the connector is mounting
on the underside, use adhesives or other
means to ensure the connector is
properly fixed to the PC board. (Double
reflow soldering on the same side is
possible.)
6) N2 reflow, conducting reflow soldering
in a nitrogen atmosphere, increases the
solder flow too greatly, enabling wicking
to occur. Make sure that the solder feed
rate and temperature profile are
appropriate.
4) Be aware that soldering while applying
a load on the connector terminals may
cause improper operation of the
connector.
5) Thoroughly clean the soldering iron.
6) Flux from the solder wire may get on
the contact surfaces during soldering
operations. After soldering, carefully
check the contact surfaces and clean off
any solder before use.
7) For soldering of prototype devices
during product development, you can
perform soldering at the necessary
locations by heating with a hot-air gun by
applying cream solder to the foot pattern
beforehand. However, at this time, make
sure that the air pressure does not move
connectors by carefully holding them
down with tweezers or other similar tool.
Also, be careful not to go too close to the
connectors and melt any of the molded
components.
8) If an excessive amount of solder is
applied during manual soldering, the
solder may creep up near the contact
points, or solder interference may cause
imperfect contact.
3. Solder reworking
1) Finish reworking in one operation.
2) For reworking of the solder bridge, use
a soldering iron with a flat tip. To prevent
flux from climbing up to the contact
surfaces, do not add more flux.
3) Keep the soldering iron tip temperature
below the temperature given in Table A.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB48E 201303-T
–13–
Notes on Using Narrow pitch Connectors
Handling Single Components
1) Make sure not to drop or allow parts to
4) Do not insert or remove the connector
when it is not soldered. Forcibly applied
Excessive force applied for insertion in a
pivot action as shown may also cause
product breakage.
Align the header and socket positions
before connecting them.
fall from work bench
2) Excessive force applied to the
terminals could cause warping, come
out, or weaken the adhesive strength of
the solder. Handle with care.
external pressure on the terminals can
weaken the adherence of the terminals to
the molded part or cause the terminals to
lose their evenness.
3) Repeated bending of the terminals
may cause terminals to break.
5) Excessive prying-force applied to one
end may cause product breakage and
separation of the solder joints at the
terminal.
3) Since some powerful cleaning
solutions may dissolve molded
components of the connector and wipe
off or discolor printed letters, we
recommend aqua pura electronic parts
cleaners. Please consult us if you wish to
use other types of cleaning fluids.
4) Please note that the surfaces of
molded parts may whiten when cleaned
with alcohol.
Cleaning flux from PC board
Handling the PC board
1) To increase the cleanliness of the
cleaning fluid and cleaning operations,
prepare equipment for cleaning process
beginning with boil cleaning, ultrasonic
cleaning, and then vapor cleaning.
2) Carefully oversee the cleanliness of
the cleaning fluids to make sure that the
contact surfaces do not become dirty
from the cleaning fluid itself.
• Handling the PC board after
mounting the connector
When cutting or bending the PC board
after mounting the connector, be careful
that the soldered sections are subjected
to excessive force.
The soldered areas should not be subjected to force.
Storage of connectors
1) To prevent problems from voids or air
pockets due to heat of reflow soldering,
avoid storing the connectors in areas of
high humidity. When storing the
Some connectors may change color
slightly if subjected to ultraviolet rays
during storage.This is normal and will not
affect the operation of the connector.
3) When storing the connectors with the
PC boards assembled and components
alreeady set, be careful not to stack them
up so the connectors are subjected to
excessive forces.
4) Avoid storing the connectors in
locations with excessive dust. The dust
may accumulate and cause improper
connections at the contact surfaces.
connectors for more than six months, be
sure to consider storage area where the
humidity is properly controlled.
2) Depending on the connector type, the
color of the connector may vary from
connector to connector depending on
when it is produced.
Other Notes
1) These products are made for the
design of compact and lightweight
devices and therefore the thickness of the
molded components has been made very
thin. Therefore, be careful during
insertion and removal operations for
excessive forces applied may damage
the products.
3) Before soldering, try not to insert or
remove the connector more than
absolutely necessary.
4) When coating the PC board after
soldering the connector to prevent the
deterioration of insulation, perform the
coating in such a way so that the coating
does not get on the connector.
6) The connectors are not meant to be
used for switching.
7) Be sure not to allow external pressure
to act on connectors when assembling
PCBs or moving in block assemblies.
2) Dropping of the products or rough
mishandling may bend or damage the
terminals and possibly hinder proper
reflow soldering.
5) There may be variations in the colors
of products from different production lots.
This is normal.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB48E 201303-T
–14–
Notes on Using Narrow pitch Connectors
Regarding sample orders to confirm proper mounting
When ordering samples to confirm
proper mounting with the placement
machine, connectors are delivered in 50-
piece units in the condition given right.
Consult a sale representative for ordering
sample units.
Please refer to the latest product
specifications when designing your
product.
Condition when delivered from manufacturing
Reel
(Delivery can also be made on a reel by
customer request.)
Required number
of products for
Embossed tape
amount required for
the mounting
sample production
(Unit 50 pcs.)
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
ACCTB48E 201303-T
–15–
相关型号:
AXK720447G
Narrow pitch connectors (0.4mm pitch) Construction makes designing devices easier.
PANASONIC
AXK722125G
Board Stacking Connector, 22 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
PANASONIC
AXK722127G
Board Stacking Connector, 22 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
PANASONIC
AXK722145G
Board Stacking Connector, 22 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
PANASONIC
AXK722147G
Narrow pitch connectors (0.4mm pitch) Construction makes designing devices easier.
PANASONIC
AXK724127G
Board Stacking Connector, 24 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
PANASONIC
AXK724145G
Board Stacking Connector, 24 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
PANASONIC
AXK724145J
Board Stacking Connector, 24 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket
PANASONIC
AXK724145V
Board Stacking Connector, 24 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket
PANASONIC
AXK724147G
Narrow pitch connectors (0.4mm pitch) Construction makes designing devices easier.
PANASONIC
AXK724227G
Board Stacking Connector, 24 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket, ROHS COMPLIANT
PANASONIC
AXK724245G
Board Stacking Connector, 24 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket,
PANASONIC
©2020 ICPDF网 联系我们和版权申明