AXK6L10345V [PANASONIC]

Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT;


型号：	AXK6L10345V
厂家：	PANASONIC
描述：	Board Stacking Connector, 10 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT 连接器
文件：	总6页 (文件大小：255K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AXK(5/6)L

NARROW-PITCH

CONNECTORS FOR

BOARD-TO-BOARD

CONNECTION

NARROW PITCH

(0.5mm) CONNECTORS

P5 SERIES — P5KL —

4. Effective mating length 0.3 mm

3) Use of Ni barrier construction is

standard. Highly effective against solder

creeping. (Available from Nov. 2005)

ꢀ What is Ni barrier construction?

Socket

Header

By providing an exposed nickel part on the

gold (Au) plated contact, solder creeping is

prevented despite the ultra low profile.

0.3mm

[Contact]

Header side contact

5. Compliance with RoHS’ Directive

Environmentally friendly, the connectors’

comply with Europe’s RoHS’ Directive.

Cadmium, lead, mercury, hexavalent,

chromium, PBB and PBDE are not used.

Ni barrier

Cu Ni Au

FEATURES

Exposed

Ni part

1. Low proﬁle mating height of 1.2 mm

with 0.5 mm pitch, was obtained.

It contributes to device compactness.

2. Strong resistance to adverse

environments! Utilizes

construction

for high contact reliability.

1) Contacts are highly resistant to shock

caused by dropping and employ our

original bellows contact construction.

Cross section of

socket side contact

APPLICATIONS

Socket side contact

• Cellular phones

• PHS

Note: Construction makes solder creeping difficult

because header side is formed at the same time.

• Portable data terminals

• Digital cameras

• Compact portable devices

4) Porosity treatment applied for

improved resistance against corrosion.

Ideal for Board-to-FPC connections

What is porosity treatment?

FPC

Reinforcing plate

This treatment consists of coating the

surface with a very thin film to seal pinholes

in the gold plating. This porosity treatment

technology ensures the same contact

reliability for thin gold plating as that of thick

gold plating.

Before

mating

Narrow-pitch

connectors

P5KL

PCB

After

1.2mm

Since the contact is

mating

formed by bending thin

plate, it has a spring-like

quality. This structure

makes it resistant to

dropping and twisting.

The simple lock

This enables the number of pins to

be doubled white the size remains

the same as that for existing FPC

connectors. This, in turn, contributes

to making products and equipment

more compact.

mechanism ensures

that the connector

clicks into position

when it is inserted for

reliable single-action

insertion on the PCB.

Porosity treatment film

Pinholes

Surrounding gas

Au plating

2) V notch construction used for excellent

resistance against foreign matters.

Ni plating

ꢀ What is V notch construction?

Base material

By using the edge for the contacting part

and increasing contact pressure per unit

area, the effectiveness in removing flux

and contaminants is increased compared

to its predecessor. This is also effective in

preventing the trapping of contaminants.

ꢀ

Improvement in insertion/removal durability

Improvement in resistance to corrosion

Improvement in contact reliability for digital signals

3. Simple lock structure employed to

further increase connection reliability

[Cross section of contacting part]

Without notch

With V notch

Socket side contact cross section

Simple lock

Header side contact cross section

AXK(5/6)L

TABLE OF PRODUCT TYPES

P5KL (0.5 mm pitch):Without retention ﬁtting

Socket

Header

✩: Available for sale

Mated

height

1.2mm

✩

Notes: 1. The standard type comes with positioning bosses.

Connectors with positioning boss are available for on-demand production.

2. Please consult us regarding numbers of contacts other than those given above.

ORDERING INFORMATION

AXK

5L: Narrow Pitch Connector P5KL (0.5 mm pitch) Socket

6L: Narrow Pitch Connector P5KL (0.5 mm pitch) Header

Number of contacts (2 digits)

Mated height

3: For mated height 1.2 mm

3: For mated height 1.2 mm

Functions

3: With positioning bosses

4: Without positioning bosses

Surface treatment (Contact portion / Terminal portion)

5: Ni plating on base, Au plating on surface

7: Ni plating on base, Au plating on surface (for Ni barrier product available from Nov. 2005)

Packing ^Note)

G: 3,000 pieces embossed tape and plastic reel × 2 (for Ni barrier product available from Nov. 2005)

J: 3,000 pieces embossed tape and paper reel × 2

V: 3,000 pieces embossed tape and paper reel × 5

Note) For packaging, models without Ni barrier only support “J” and “V”. Models with Ni barrier support only “G”.

AXK(5/6)L

PRODUCT TYPES

Part No.

Packing quantity

Socket

Ni barrier product:

Header

Mated height

No. of contacts

Inner carton

(1-reel)

Ni barrier product:

Outer carton

Not available

(Paper reel)

(Plastic reel)

Not available

(Paper reel)

(Plastic reel)

(Recommendation)

AXK5L10347G

(From Nov. 2005)

AXK6L10347G

(From Nov. 2005)

AXK5L10345∗

AXK5L12345∗

AXK5L20345∗

AXK5L24345∗

AXK5L30345∗

AXK5L34345∗

AXK5L40345∗

AXK5L50345∗

AXK5L60345∗

AXK6L10345∗

AXK6L12345∗

AXK6L20345∗

AXK6L24345∗

AXK6L30345∗

AXK6L34345∗

AXK6L40345∗

AXK6L50345∗

AXK6L60345∗

AXK5L12347G

(From Nov. 2005)

AXK6L12347G

(From Nov. 2005)

AXK5L20347G

(From Nov. 2005)

AXK6L20347G

(From Nov. 2005)

Asterisk “∗” mark on

end of part No.;

J: 6,000 pieces

(2-reel)

V: 15,000 pieces

(5-reel)

“G” mark on end of

part No.;

6,000 pieces

(2-reel)

Asterisk “∗” mark on

end of part No.;

J: 3,000 pieces

V: 3,000 pieces

“G” mark on end of

part No.;

AXK5L24347G

(From Nov. 2005)

AXK6L24347G

(From Nov. 2005)

AXK5L30347G

(From Nov. 2005)

AXK6L30347G

(From Nov. 2005)

1.2 mm

AXK5L34347G

(From Nov. 2005)

AXK6L34347G

(From Nov. 2005)

3,000 pieces

AXK5L40347G

(From Nov. 2005)

AXK6L40347G

(From Nov. 2005)

AXK5L50347G

(From Nov. 2005)

AXK6L50347G

(From Nov. 2005)

AXK5L60347G

(From Nov. 2005)

AXK6L60347G

(From Nov. 2005)

Notes) 1. Regarding ordering units: During production, Please make orders in 1-reel units. Samples for mounting conﬁrmation: Please consult us. Samples: Small lot orders

are possible. Please consult us.

2. The standard type comes without positioning bosses. Connectors with positioning bosses are available for on-demand production.

For this type of connector, 9th digit of the part no. changes from 4 to 3. e.g. 10 contacts for sockets: AXK5L10337G

SPECIFICATIONS

1. Characteristics

Item

Speciﬁcations

0.5A/contact (Max. 10 A at total contacts)

60V AC/DC

Conditions

Rated current

Rated voltage

Breakdown voltage

Insulation resistance

Electrical

characteristics

150V AC for 1 minute

Detection current: 1mA

Using 500V DC megger

Min. 1,000MΩ (initial)

Measured based on the HP4338B measurement method

of JIS C 5402

Contact resistance

Max. 90mΩ

Composite insertion force

Composite removal force

Max. 0.981N {100gf}/contacts × contacts (initial)

Min. 0.0588N {6gf}/contacts × contacts

Mechanical

characteristics

Holding force of terminal

securing section

Measures the maximum load in the post axial direction

until removal

Min. 0.981N {100gf}/contact

Ambient temperature

–55°C to +85°C

No freezing at low temperatures

Infrared reﬂow soldering

Max. peak temperature of 245°C

Soldering heat resistance

300°C within 5 seconds

350°C within 3 seconds

Soldering iron

Sequence

1. –55_–3⁰°C, 30 minutes

2. ~ , Max. 5 minutes

3. 85⁺³₀°C, 30 minutes

4. ~ , Max. 5 minutes

Thermal shock resistance

(header and socket mated)

5 cycles, insulation resistance min. 100MΩ,

contact resistance max. 90mΩ

Environmental

characteristics

Humidity resistance

(header and socket mated)

120 hours, insulation resistance min. 100MΩ,

contact resistance max. 90mΩ

Bath temperature 40 2°C,

humidity 90 to 95% R.H.

Saltwater spray resistance

(header and socket mated)

24 hours, insulation resistance min. 100MΩ,

contact resistance max. 90mΩ

Bath temperature 35 2°C,

saltwarter concentration 5 1%

H²S resistance

(header and socket mated)

Bath temperature 40 2°C, gas concentration 3 1 ppm,

humidity 75 to 80% R.H.

48 hours, contact resistance max. 90mΩ

Lifetime

characteristics

Repeated insertion and removal speed of

max. 200 times/hours

Insertion and removal life

50 times

Unit weight

20 contacts; Socket: 0.05g; Header: 0.02g

2. Material and surface treatment

Part name

Material

Surface treatment

—

Molded portion

Heat-resistant resin (UL94V-0), Ivory white

Contact portion: Ni plating on base, Au plating on surface

Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)

However, the area adjacent to the terminal on Ni barrier models is

exposed to Ni on base.

Contact/Post

Copper alloy

AXK(5/6)L

mm General tolerance: 0.2

DIMENSIONS

• Socket (Mated height: 1.2mm)

Terminal

coplanarity

0.1

1.20

0.10

0.50 0.05

0.20 0.03

Dimension table (mm)

No. of contacts

5.50

2.00

2.50

4.50

5.50

7.00

8.00

9.50

12.00

14.50

6.00

8.00

9.00

10.50

11.50

13.00

15.50

18.00

0.10 0.03

• Header (Mated height: 1.2mm)

Terminal coplanarity

0.10

0.95

B 0.1

0.50 0.05

0.20 0.03

Dimension table (mm)

No. of contacts

3.90

4.40

6.40

7.40

8.90

9.90

11.40

13.90

16.40

2.00

2.50

4.50

5.50

7.00

8.00

9.50

12.00

14.50

0.10 0.03

• Socket and header are mated

Header

Socket

AXK(5/6)L

EMBOSSED TAPE DIMENSIONS (unit:mm, Common for respective contact type, socket and header)

• Tape dimensions (Conforming to JIS C 0806-1990.

However, some tapes have mounting hole pitches that do

not comply with the standard.)

• Plastic reel dimensions (Conforming to EIAJ ET-7200B)/

Paper reel dimensions (Conforming to JIS C 0806-1990)

Tape I

Tape II

A 0.3

1.75

Top cover tape

Emboss carrier tape

1.5^+0.1dia.

Dimension table (mm)

(1) Sufﬁx: G (1 reel, 3,000 pieces embossed tape: Plastic reel package) ... From Nov. 2005

Mated height

No. of contacts

10 to 18

20 to 50

Type of taping

Quantity per reel

3,000 pcs.

Tape I

16.0

24.0

32.0

—

7.5

8.0

17.4 1

25.4 1

33.4 1

380 dia.

Socket and header are common:

1.2mm

Tape I

—

11.5

14.2

3,000 pcs.

Tape II

28.4

3,000 pcs.

(2) Sufﬁx: J, V (1 reel, 3,000 pieces embossed tape: Paper reel package)

Mated height

No. of contacts

10 to 18

20 to 50

Type of taping

—

16.4⁺²

24.4⁺²

32.4⁺²

Quantity per reel

3,000 pcs.

Tape I

16.0

24.0

32.0

7.5

8.0

370 dia.

Socket and header are common:

1.2mm

Tape I

—

11.5

14.2

3,000 pcs.

Tape II

28.4

3,000 pcs.

Connector orientation with respect to direction of progress of embossed tape

Type

Common for P5KL

Direction of

tape progress

Socket

Header

Note: There is no indication on this product regarding top-bottom or left-right orientation.

AXK(5/6)L

NOTES

1. As shown below, excess force

during insertion may result in damage

to the connector or removal of the

solder. Please be careful. Also, to

prevent connector damage plese

conﬁrm the correct position before

mating connectors.

• Socket

• Header

Reconnended PC board pattern (TOP VIEW)

0.50 0.05

0.25 0.03

0.50 0.05

0.25 0.03

0.40 0.05

0.125 0.03

B 0.05

0.40 0.05

0.125 0.03

B 0.05

2. Keep the PC board warp no more

than 0.03 mm in relation to the overall

length of the connector.

: Non-insulated area where through holes are prohibited

Recommended metal mask pattern

Metal mask thickness: 150 µm

(Terminal portion opening area ratio: 56%)

(Terminal portion opening area ratio: 57%)

0.50 0.01

0.23 0.01

0.50 0.01

0.23 0.01

Max. 0.03mm

3. PC Boards and Recommended

Metal Mask Patterns

Connectors are mounted with high

density, with a pitch interval of 0.4 to 0.5

mm. It is therefore necessary to make

sure that the right levels of solder are

used, in order to reduce solder bridge

and other issues. The ﬁgures to the right

are recommended metal mask patterns.

Please use them as a reference.

0.35 0.01

0.115 0.01

0.35 0.01

0.115 0.01

Recommended metal mask pattern

Metal mask thickness: 120 µm

(Terminal portion opening area ratio: 70%)

Recommended metal mask pattern

Metal mask thickness: 120 µm

(Terminal portion opening area ratio: 70%)

0.50 0.01

0.23 0.01

0.50 0.01

0.23 0.01

0.35 0.01

0.115 0.01

0.35 0.01

0.115 0.01

Regarding general notes, please refer

to page 12.

For other details, please verify with the

product speciﬁcation sheets.

AXK6L10345V [PANASONIC]

相关型号：

AXK6L10347G

AXK6L12337G

AXK6L12347G

AXK6L20337G

AXK6L20345J

AXK6L20345V

AXK6L20347G

AXK6L24337G

AXK6L24345V

AXK6L24347G

AXK6L30337G

AXK6L30345J