AXK4S30535G [PANASONIC]

Board Stacking Connector, 30 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT;


型号：	AXK4S30535G
厂家：	PANASONIC
描述：	Board Stacking Connector, 30 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal, ROHS COMPLIANT 连接器
文件：	总6页 (文件大小：149K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Order Discontinued as of August 31, 2009

AXK(3/4)S

NARROW-PITCH

CONNECTORS FOR

BOARD-TO-BOARD

CONNECTION

NARROW PITCH (0.6mm)

CONNECTORS P6 SERIES – P6S –

FEATURES

APPLICATIONS

1. Bellows-type contacts

1. Compact portable devices “Cellular

phones, DVC, Digital cameras, etc”

2.This is ideal in applications

Bellows-type contacts resist mating

stress and offer high contact reliability.

involving information devices such as

notebook computers, where

connections are required between a

backplane and a CPU board or another

type of multi-wiring expansion board.

Round corner

makes contact.

Socket

The bellows type

contacts are fabricated

by bending thin sheet

metal. They offer reliable

contact since a rounded

corner, instead of a

sharp edge, is used for

tuning fork type contact.

Header

2. Porosity treatment applied for

improved resistance against

corrosion.

Compliance with RoHS Directive

3. Mating length 1.1mm

The effective mating length has been

extended to ensure that there is some

latitude in the mating.

Expansion board

requiring multi-wiring,

such as CPU board.

A longer effective mating

length means that normal

electrical connection can

Motherboard

Effective

mating

length

be maintained even if the

connectors are not

perfectly coupled.

Type

P6S

Effective mating length

1.1mm

4. Automatic mounting

1) Suction area for suction-type

automatic mounting machines is

employed.

2) Embossed tape packaging is standard.

3) Terminal construction which is virtually

resistant to solder bridging.

Suction face

Socket

Header

Matsushita Electric Works, Ltd.

http://www.mew.co.jp/ac/e/

Order Discontinued as of August 31, 2009

AXK(3/4)S

TABLE OF PRODUCT TYPES

Socket

Header

9.0mm

8.0mm

7.0mm

Mated

height

6.0mm

5.0mm

4.0mm

✩

100

Notes: 1. Special orders are possible for contact numbers not listed in the table above.

(Please consult us in such a case.)

2. The standard type comes with positioning bosses. Connectors without positioning

boss are available for on-demand production.

ORDERING INFORMATION

AXK

3S: Narrow Pitch Connector P6S (0.6 mm pitch) Socket

4S: Narrow Pitch Connector P6S (0.6 mm pitch) Header

Number of contacts (2 digits)

Mated height

0: For mated height 4.0 mm, 5.0 mm and 6.0 mm

3: For mated height 7.0 mm, 8.0 mm and 9.0 mm

4: For mated height 4.0 mm and 7.0 mm

5: For mated height 5.0 mm and 8.0 mm

6: For mated height 6.0 mm and 9.0 mm

Functions

3: With positioning bosses

4: Without positioning bosses

Surface treatment (Contact portion / Terminal portion)

5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface

Packing

G: Socket for mated height 4.0, 5.0, 6.0 mm and header for mated height 4.0, 7.0 mm:

1,500 pieces embossed tape and plastic reel × 2

Socket for mated height 7.0, 8.0, 9.0 mm and header for mated height 5.0, 6.0, 8.0, 9.0 mm:

1,000 pieces embossed tape and plastic reel × 2

Matsushita Electric Works, Ltd.

http://www.mew.co.jp/ac/e/

Order Discontinued as of August 31, 2009

AXK(3/4)S

PRODUCT TYPES

Part No.

Packing

Mated height

No. of contacts

Socket

Header

Inner carton (1 reel)

Outer carton

100

AXK3S20035G

AXK3S30035G

AXK3S40035G

AXK3S50035G

AXK3S60035G

AXK3S80035G

AXK3S00035G

AXK3S20035G

AXK3S30035G

AXK3S40035G

AXK3S50035G

AXK3S60035G

AXK3S80035G

AXK3S00035G

AXK3S20035G

AXK3S30035G

AXK3S40035G

AXK3S50035G

AXK3S60035G

AXK3S80035G

AXK3S00035G

AXK3S20335G

AXK3S30335G

AXK3S40335G

AXK3S50335G

AXK3S60335G

AXK3S80335G

AXK3S00335G

AXK3S20335G

AXK3S30335G

AXK3S40335G

AXK3S50335G

AXK3S60335G

AXK3S80335G

AXK3S00335G

AXK3S20335G

AXK3S30335G

AXK3S40335G

AXK3S50335G

AXK3S60335G

AXK3S80335G

AXK3S00335G

AXK4S20435G

AXK4S30435G

AXK4S40435G

AXK4S50435G

AXK4S60435G

AXK4S80435G

AXK4S00435G

AXK4S20535G

AXK4S30535G

AXK4S40535G

AXK4S50535G

AXK4S60535G

AXK4S80535G

AXK4S00535G

AXK4S20635G

AXK4S30635G

AXK4S40635G

AXK4S50635G

AXK4S60635G

AXK4S80635G

AXK4S00635G

AXK4S20435G

AXK4S30435G

AXK4S40435G

AXK4S50435G

AXK4S60435G

AXK4S80435G

AXK4S00435G

AXK4S20535G

AXK4S30535G

AXK4S40535G

AXK4S50535G

AXK4S60535G

AXK4S80535G

AXK4S00535G

AXK4S20635G

AXK4S30635G

AXK4S40635G

AXK4S50635G

AXK4S60635G

AXK4S80635G

AXK4S00635G

4.0 mm

1,500 pieces

3,000 pieces

5.0 mm

6.0 mm

7.0 mm

8.0 mm

9.0 mm

Socket: 1,500 pieces

Header: 1,000 pieces

Socket: 3,000 pieces

Header: 2,000 pieces

Socket: 1,000 pieces

Header: 1,500 pieces

Socket: 2,000 pieces

Header: 3,000 pieces

1,000 pieces

2,000 pieces

Notes) 1. Regarding ordering units: During production: Please make orders in 1 reel units.

Samples for mounting conﬁrmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to conﬁrm proper mounting” on page 19.)

Samples: Small lot orders are possible.

2. The standard type comes without positioning bosses. Connectors with positioning bosses are available for on-demand production.

For this type of connector, 9th digit of the part no. changes from 3 to 4 e.g. Mated height 4.0 mm, 20 contacts for sockets: AXK3S20045G.

Matsushita Electric Works, Ltd.

http://www.mew.co.jp/ac/e/

Order Discontinued as of August 31, 2009

AXK(3/4)S

SPECIFICATIONS

1. Characteristics

Speciﬁcations

Item

Conditions

Mated height:

4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm

Rated current

Rated voltage

0.5A/terminal (Max. 16 A)

60V AC/DC

Electrical

characteristics

Breakdown voltage

Insulation resistance

150V AC for 1 min.

Min. 1,000MΩ

Detection current: 1mA

Using 500V DC megger

Based on the contact resistance measurement

method speciﬁed by JIS C 5402.

Contact resistance

Max. 80mΩ

Composite insertion force

Composite removal force

Max. 0.785N {80gf} × no. of contacts (initial)

Min. 0.0588N {6gf} × no. of contacts

Mechanical

characteristics

Measures the maximum load in the post axial

direction until removal

Post holding force

Min. 0.98N {100gf}

Ambient temperature

–55°C to +85°C

Max. peak temperature of 245°C (on the surface of the

PC board around the connector terminals)

No freezing at low temperatures

Infrared reﬂow soldering

Soldering iron

Soldering heat resistance

300°C within 5 sec.

Sequence

5 cycles,

insulation resistance min. 100MΩ,

contact resistance max. 80mΩ

1. –55_–3⁰°C, 30 minutes

2. ~ , Max. 5 minutes

3. 85⁺³₀°C, 30 minutes

4. ~ , Max. 5 minutes

Thermal shock resistance

(header and socket mated)

Environmental

characteristics

120 hours,

insulation resistance min. 100MΩ,

contact resistance max. 80mΩ

Humidity resistance

(header and socket mated)

Bath temperature 40 2°C,

humidity 90 to 95% R.H.

24 hours,

insulation resistance min. 100MΩ,

contact resistance max. 80mΩ

Saltwater spray resistance

(header and socket mated)

Bath temperature 35 2°C,

saltwater concentration 5 1%

Bath temperature 40 2°C,

gas concentration 3 1 ppm,

humidity 75 to 80% R.H.

H2S resistance

(header and socket mated)

48 hours,

contact resistance max. 80mΩ

Lifetime

characteristics

Repeated insertion and removal speed of max. 200

times/hours

Insertion and removal life

50 times

P6S Mated height: 4mm

50 contacts; Socket: 0.29g Header: 0.26g

Unit weight

2. Material and surface treatment

Mated height: 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm

Part name

Material

Surface treatment

—

Molded portion

Contact/post

Heat-resistant resin (UL94V-0)

Contact portion: Ni plating on base, Au plating on surface

Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)

Copper alloy

The CAD data of the products with a CAD Data mark can be downloaded from: http://www.mew.co.jp/ac/e

DIMENSIONS (Unit: mm)

• Mated height: 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm

Recommended PC board pattern

(TOP VIEW)

• Socket

B 0.10

0.10

CAD Data

0.60 0.05

0.20 0.03

B 0.05

0.60 0.05

0.30 0.05

0.60 0.05

C 0.05

0.65 0.05 dia.

C 0.10

General tolerance: 0.2

Dimension table (mm)

No. of contact

Mated height

9.1

5.40

8.00

4.0mm, 5.0mm, 6.0mm

7.0mm, 8.0mm, 9.0mm

3.05

6.05

12.1

15.1

18.1

21.1

27.1

33.1

8.40

11.00

14.00

17.00

20.00

26.00

32.00

11.40

14.40

17.40

23.40

29.40

The speciﬁcations and appearance of this product are subject to change for improvement.

Please contact us for details.

100

Matsushita Electric Works, Ltd.

http://www.mew.co.jp/ac/e/

Order Discontinued as of August 31, 2009

AXK(3/4)S

• Header

Recommended PC board pattern

CAD Data

(TOP VIEW)

0.10

B 0.10

0.60 0.05

0.20 0.03

B 0.05

0.60 0.05

0.30 0.05

0.60 0.05

C 0.05

0.65 0.05 dia.

C 0.10

General tolerance: 0.2

Dimension table (mm)

No. of contact

Mated height

4.0mm, 7.0mm

5.0mm, 8.0mm

6.0mm, 9.0mm

9.1

5.40

8.00

0.95

1.95

2.95

3.3

4.3

5.3

12.1

15.1

18.1

21.1

27.1

33.1

8.40 11.00

11.40

14.00

17.00

20.00

26.00

32.00

14.40

17.40

23.40

29.40

100

Socket and header are mated

Mated height

4.0mm

5.0mm

6.0mm

7.0mm

8.0mm

9.0mm

+0.2

-0.1

EMBOSSED TAPE DIMENSIONS (unit: mm, Common for respective contact type, socket and header)

• Tape dimensions (Conforming to JIS C 0806-1990.

However, some tapes have mounting hole pitches that do

not comply with the standard.)

• Plastic reel dimensions (Conforming to EIAJ ET–7200B)

Tape I

Tape II

A 0.3

Taping reel

A 0.3

E 1

1.75

Top cover tape

Embossed carrier tape

Embossed mounting-hole

1.5^+0.1dia.

The speciﬁcations and appearance of this product are subject to change for improvement.

Please contact us for details.

Matsushita Electric Works, Ltd.

http://www.mew.co.jp/ac/e/

Order Discontinued as of August 31, 2009

AXK(3/4)S

Dimension table (mm)

Sufﬁx: G (embossed tape package)

Mated height

No. of contacts

20 to 40

50 to 60

Type of taping

Tape I

Quantity per reel

1,500

24.0

32.0

44.0

56.0

24.0

32.0

44.0

56.0

24.0

32.0

44.0

56.0

24.0

32.0

44.0

56.0

—

11.5

14.2

20.2

26.2

11.5

14.2

20.2

26.2

11.5

14.2

20.2

26.2

11.5

14.2

20.2

26.2

12.0

25.4 1

33.4 1

45.4 1

57.4 1

25.4 1

33.4 1

45.4 1

57.4 1

25.4 1

33.4 1

45.4 1

57.4 1

25.4 1

33.4 1

45.4 1

57.4 1

Tape II

Tape I

28.4

40.4

52.4

—

Socket: 4.0mm, 5.0mm, 6.0mm

Socket: 7.0mm, 8.0mm, 9.0mm

Header: 4.0mm, 7.0mm

380 dia.

100

20 to 40

50 to 60

Tape II

Tape I

28.4

40.4

52.4

—

380 dia.

1,000

1,500

1,000

100

20 to 40

Tape II

Tape I

28.4

40.4

52.4

—

60 to 80

100

20 to 40

50 to 60

Tape II

28.4

40.4

52.4

Header: 5.0mm, 6.0mm, 8.0mm, 9.0mm

100

Connector orientation with respect to direction of progress of embossed tape

Type

Direction

of tape progress

Common for P6S

Header

Socket

This corner is oriented on the C side.

NOTES

1. Prevention of reverse mating

Excessive mating force may damage the

key, so be sure to match chamfered

corners when mating.

For other details, please verify with

the product speciﬁcation sheets.

Outline (top view)

Chamfered corner

Mating state

Chamfered corner

The speciﬁcations and appearance of this product are subject to change for improvement.

Please contact us for details.

Matsushita Electric Works, Ltd.

http://www.mew.co.jp/ac/e/

AXK4S30535G [PANASONIC]

相关型号：

AXK4S30535P

AXK4S30545P

AXK4S30635G

AXK4S30635P

AXK4S30645P

AXK4S40435G

AXK4S40435J

AXK4S40435P

AXK4S40445J

AXK4S40445P

AXK4S40535G

AXK4S40535P