AXC436101 [PANASONIC]
Card Edge Connector, 36 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT;型号: | AXC436101 |
厂家: | PANASONIC |
描述: | Card Edge Connector, 36 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT 连接器 |
文件: | 总6页 (文件大小:162K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AXC
CARD-EDGE
CONNECTORS
(AXC)
FOR PC BOARD
TO PC BOARD
Solder-dip type with flange
FEATURES
1. Long insertion and removal life.
Thanks to our original contact shape, low
insertion force is required and it is
designed so that the contact position
shifts at the start and end of card
insertion. This reduces metal abrasion.
• Standard type: 10,000 times
• Low-insertion-force, long life type:
30,000 times
3. Incorrect or reverse insertion can
be prevented.
By means of the key to prevent incorrect
insertion and the slit fabrication of the
printed circuit board, reverse insertion
into a printed circuit board block or
incorrect insertion into a similarly
appearing printed circuit board block can
be prevented.
Solder-dip type without flange
Contact shape
4. Compliance with RoHS’ Directive
Environmentally friendly, the connectors’
comply with Europe’s RoHS’ Directive.
Cadmium, lead, mercury, hexavalent,
chromium, PBB and PBDE are not used.
Contact
Guide face
PC board
APPLICATIONS
• Communication equipment
• Measuring equipment
• Factory automation related equipment
Guide face contact position
Final contact position
• What is the low-insertion/long-life type?
This connector employs a unique soft-
insertion construction with a step provided in
the contact. Low insertion power (less than
30% of standard connector) and long life
(over 30,000 insertion/removal times) is
realized.
2. Low insertion types are also
available.
Among solder-dip types, low insertion
types are available with approximately
0.490N, 50gf/ contact and less than 1/4
of the standard connector with a good fit
feel.
Soft insertion construction
with step provided in the
contacting element
Insertion/removal force comparison
between low insertion and standard types
88.3N {9kgf}
Long
Short
Standard connector
0
7.0mm
Low profile connector
49.0N {-5kgf}
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXC
ORDERING INFORMATION
AXC
4: Card-edge connectors
<No. of contacts (2 digits)>
34: 34 contacts 36: 36 contacts 44: 44 contacts
56: 56 contacts 60: 60 contacts 62: 62 contacts
72: 72 contacts 86: 86 contacts 00: 100 contacts
<Mounting flange shape and type>
1: Without flange (Standard type)
2: With flange (Standard type)
4: Without flange (Low insertion force/Long life type)
5: With flange (Low insertion force/Long life type)
<Terminal shape>
0: DIP straight terminal
<Surface treatment (Contact portion/Terminal portion)>
1: Au plating 0.2 µm/Sn plating (Standard type)
3: Au plating 0.76 µm/Sn plating (Low insertion force/Long life type)
PRODUCT TABLE
Standard type
Low insertion force/Long life type
Type
Solder-dip straight terminals
Solder-dip straight terminals
Contact pitches
2.54mm
2.54mm
5.43mm
100
Spaces between rows
5.08mm
100
86
86
72
72
60, 62
56
60, 62
56
No. of contacts
44
44
34, 36
—
34, 36
—
Terminal shape
Solder-dip straight terminal
Solder-dip straight terminal
Note) Each connector is available with or without flanges.
PRODUCT TYPES
1.Connector
• Standard type (solder-dip straight terminal)
• Low insertion force/Long life type (solder-dip straight terminal)
No flange type Flange type
Packing quantity
No flange type Flange type
Packing quantity
Inner carton Outer carton
No. of
contacts
No. of
contacts
Part No.
Part No.
Inner carton Outer carton
Part No.
Part No.
34
36
44
56
60
62
72
86
100
AXC434101
AXC436101
AXC444101
AXC456101
AXC460101
AXC462101
AXC472101
AXC486101
AXC400101
AXC434201
AXC436201
AXC444201
AXC456201
AXC460201
AXC462201
AXC472201
AXC486201
AXC400201
34
36
44
56
60
62
72
86
100
AXC434403
AXC436403
AXC444403
AXC456403
AXC460403
AXC462403
AXC472403
AXC486403
AXC400403
AXC434503
AXC436503
AXC444503
AXC456503
AXC460503
AXC462503
AXC472503
AXC486503
AXC400503
—
200 pcs.
—
200 pcs.
Note) The row pitch between solder-dip straight terminals of the low-
insertion-power/long-life type is different from the card edge
connector standard type.
Low insertion force/Long life type:
Standard type:
5.43mm
5.08mm
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXC
2. Keys (Standard type, low insertion force and long life type)
Packing quantity
Name
Part No.
Inner carton
50 pcs.
Outer carton
200 pcs.
Incorrect insertion prevention key
AXC8001
SPECIFICATIONS
1. Characteristics (Standard type)
Item
Specifications
Conditions
Rated current
3A
Rated voltage
250V AC
Electrical
characteristics
Breakdown voltage
Insulation resistance
1,000 V AC for 1 min.
Min. 1,000MΩ
Detection current: 1mA
at 500V DC
Measured based on the HP4338B measurement
method of JIS C 5402
Contact resistance
Insertion force (unit)
Max. 20mΩ
Measured by steel gauge with 1.78mm thickness
and smoothness 0.1s.
Max. 4.45N {453.6gf}
Mechanical
characteristics Removal force (unit)
Measured by steel gauge with 1.37mm thickness
and smoothness 0.1s after 3 times insertion of
1.78mm thickness gauge
Min. 0.279N {28.4gf}
Holding force for contact
Min. 9.81N {1kgf}
10,000 times
Life time
Insertion and removal life
characteristics
Replace the PCB board within 2,000 times.
No freezing at low temperatures
Ambient temperature
Environmental
–55°C to +105°C
260°C: Within 10 sec.; 300°C: Within 5 sec.
350°C: Within 3 sec.
Soldering temperature
characteristics
resistance
2. Characteristics (Low insertion force/Long life type)
Item
Specifications
2A
Conditions
Rated current
Rated voltage
250V AC
Electrical
characteristics
Breakdown voltage
Insulation resistance
1,000 V AC for 1 min.
Detection current: 1mA
at 500V DC
Min. 1,000MΩ
Measured based on the HP4338B measurement
method of JIS C 5402
Contact resistance
Max. 20mΩ
Max. 39.2N {4.0kgf} (100 contacts)
Max. 28.4N {2.9kgf} (72 contacts)
Max. 13.7N {1.4kgf} (34 contacts)
The contact face of the 1.6 0.15 mm PC board is
gold plated.
Guide portion of PC board is chamfered 15°.
Insertion force (Composite)
Mechanical
characteristics
Min. 5.88N {0.6kgf} (100 contacts)
Min. 4.21N {0.43kgf} (72 contacts)
Min. 1.96N {0.2kgf} (34 contacts)
Removal force (Composite)
Life time
characteristics
Insertion and removal life
Ambient temperature
30,000 times
Replace the PCB board within 2,000 times.
No freezing at low temperatures
–55°C to +105°C
260°C: Within 10 sec.; 300°C: Within 5 sec.
350°C: Within 3 sec.
Environmental
characteristics
Soldering temperature
resistance
3. Material and surface treatment
Material
Low insertion force/
Long life type
Surface treatment
Part name
Standard type
Standard type
Low insertion force/Long life type
Molded portion
Glass reinforced PBT (UL94V-0)
—
Contact portion: Ni plating on base,
Au plating (0.2µm)
Contact portion: Ni plating on base,
Au plating (0.76µm)
Contact
Copper alloy
on surface
on surface
Terminal portion: Ni plating on base,
Sn plating on surface
Terminal portion: Ni plating on base,
Sn plating on surface
4. Applicable PC board
Standard type, low insertion force and long life type
• Inserting PC board thickness: 1.6 0.15mm
• Mounting PC board thickness: 1.6 to 2.4mm
• Pattern pitch: 2.54 0.05mm
• Pattern width: 1.4mm
• Contact portion: Au plating
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXC
mm General tolerance: 0.3
DIMENSIONS
1. Standard type
• Without flange
9.9
E+0.3
0
A
16.0
4.0
2.54 0.1
0.6
0.35
5.08 0.25
Dimension table (mm)
D
No. of contacts
A
D
E
34
36
44
56
60
62
72
86
100
49.78
52.32
62.48
77.72
82.8
40.64
43.18
53.34
68.58
73.66
76.2
45.78
48.32
58.48
73.72
78.8
Recommended PC board pattern (Bottom view)
D 0.1
0.8+0.1 dia.
0
2.54 0.05
85.34
98.04
81.34
94.04
(9.9)
5.08 0.05
88.9
115.82 106.68 111.82
133.6 124.46 129.6
(A)
• With flange
3.3 dia.
9.9
E+0.3
4.3
0
C
B
Applicable PC board dimensions
A
5.3
10.7
16.0
4.0
10 0.2
0.6
2.54 0.1
0.35
Key way
1.40 0.05
2.54 0.05
D
0.5 to 1.5
5.08 0.25
0.91 0.1
0.50
1.27 0.1
1.60 0.15
D 0.1
Recommended PC board pattern (Bottom view)
G 0.1
D
2.54 0.05
0.8+0.1 dia.
0
(9.9)
5.08 0.05
Dimension table (mm)
No. of contacts
A
B
C
D
E
G
A
C 0.1
B
34
36
44
56
60
62
72
86
100
49.78
52.32
62.48
77.72
82.8
64.39
66.93
77.09
92.33
97.41
99.95
57.78
60.32
70.48
85.72
90.8
40.64
45.78
48.32
58.48
73.72
78.8
45.58
48.12
58.28
73.52
78.6
43.18
53.34
68.58
73.66
76.2
Mounting hole cut-out
M3 or 3.3 dia.
10.2+00.3
85.34
93.34
81.34
94.04
81.14
93.84
98.04 112.65 106.04
88.9
115.82 130.43 123.82 106.68 111.82 111.62
133.6 148.21 141.6 124.46 129.6 129.4
+0.5
A
−0.2
C 0.1
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXC
mm General tolerance: 0.3
2. Low insertion force/Long life type
A) With flange type
3.3 dia.
9.9
E+0.3
C
B
4.3
5.3
0
A
9.9
10.7
16.0
B) Without flange type
0.4
4.0
2.54 0.1
0.6
5.43 0.25
D
Recommended PC board pattern (Bottom view)
0.1
D
0.8+0.1 dia.
0
2.54 0.05
Terminal pitches are different from standard type.
Low insertion force/Long life type : 5.43mm
(9.9)
5.43 0.05
Standard type
: 5.08mm
A
C 0.1
B
Applicable PC board dimensions
Dimension table (mm)
No. of contacts
A
B
C
D
E
G
34
36
44
56
60
62
72
86
100
49.78
52.32
62.48
77.72
82.8
64.39
66.93
77.09
92.33
97.41
99.95
57.78
60.32
70.48
85.72
90.8
40.64
43.18
53.34
68.58
73.66
76.2
45.78
48.32
58.48
73.72
78.8
45.58
48.12
58.28
73.52
78.6
10 0.2
2
Key way
0.91 0.1
1.27 0.1
1.40 0.05
2.54 0.05
1.60 0.15
0.5 to 1.5
D 0.1
G 0.1
85.34
93.34
81.34
94.04
81.14
93.84
98.04 112.65 106.04
88.9
115.82 130.43 123.82 106.68 111.82 111.62
133.6 148.21 141.6 124.46 129.6 129.4
Note) Dimensions of A, D, E and G are common for both types.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXC
NOTES
1. Cautions regarding printed circuit
board fabrication
4) The proper thickness of printed circuit
board should be used.
3. Regarding the operations for dip
type soldering
1) Appropriate dimensions for the board
insertion width should be provided for the
connector connection section of the
printed circuit board. If the clearance
between the printed circuit board
insertion width and that of the connector
is large, defective contact or short circuit
can be caused. The drawing for the
printed circuit board pattern design
should provide reference to the clearance
as being small.
5) Care must be taken with printed circuit
board “warp.” The extent of the warpage
may be exacerbated when the electronic
components are mounted on the printed
circuit board due to the contraction of the
solder on the board. For this reason,
ensure that the maximum warp of the
area where the connector is mated is
0.1mm.
The dip type soldering operations should
be carried out under the following
conditions.
260°C Within 10 seconds
300°C Within 5 seconds
350°C Within 3 seconds
Regarding general notes, please refer
to page 12.
2. Regarding insertion of printed
circuit board
For other details, please verify with the
product specification sheets.
1) Care should be taken to avoid having
any oil, flux, or other foreign matter
adhere to the insertion section contact
surface of the printed circuit board.
Foreign matter can lead to defective
contact. If such a condition exists, the
adhering matter should be removed with
alcohol, freon, or other suitable solvent.
2) Insert into connector at least 8.2 mm
from the insertion edge of the PC board.
Printed circuit
board
Connector connection
section
Connector
Clearance
Board insertion
width (G)
Board acceptance
width (E)
Clearance
2) The pattern shift of the front and back
connector connection section of the
printed circuit board should be within
0.2mm.
Min. 8.2
PC board
0.2mm Max.
Connector
3) Bevelling should be provided without
fail for the insertion width of the
3) By means of a groove fabricated at a
designated position, a key (special
accessory part) is inserted for the
prevention of reverse insertion or
incorrect insertion of a similarly
appearing printed circuit board.
mm
connector connection section. When the
printed circuit board is inserted in the
connector, the bevelling will keep
distortion of the contacts and insertion
force small, improving the insertion
capability along with preventing defective
contact due to dropping out of the printed
circuit board end surface.
10
• Standard type
mm
30°
Printed circuit board
21.2
0.5
1.6
10.2
45°
0.5 to 1.5
2.15
0.6
• Low insertion force/Long life type
mm
Max. Max.
15° 15°
Printed circuit board
0.5
1.6
45°
0.5 to 1.5
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
相关型号:
AXC436201
Card Edge Connector, 36 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC436403
Card Edge Connector, 36 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC436503
Card Edge Connector, 36 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC444101
Card Edge Connector, 44 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC444201
Card Edge Connector, 44 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC444403
Card Edge Connector, 44 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC444503
Card Edge Connector, 44 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC456101
Card Edge Connector, 56 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC456201
Card Edge Connector, 56 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC456403
Card Edge Connector, 56 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC456503
Card Edge Connector, 56 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
AXC460101
Card Edge Connector, 60 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明