AM1307KF [PANASONIC]
Snap Acting/Limit Switch, Momentary, 0.5A, 125VDC, 6mm, Screw Terminal, Plunger Actuator, Panel Mount, ROHS COMPLIANT;
| 型号： | AM1307KF |
| 厂家： | 
PANASONIC |
| 描述： | Snap Acting/Limit Switch, Momentary, 0.5A, 125VDC, 6mm, Screw Terminal, Plunger Actuator, Panel Mount, ROHS COMPLIANT 开关 |
| 文件： | 总9页 (文件大小：203K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AM1
HIGH CONTACT CAPACITY,
PRECISE OPERATION
(NZ BASIC)
SWITCHES
FEATURES
TYPICAL APPLICATION
17.5
49.2
• 15 A High current switching capacity
and high precision
• General industrial machinery
• Medical equipment
24.1
• Wide allowance of operating speed
• Versatile variety of actuators
• UL/CSA approved
• Measuring instruments
• Transportation equipment
• Home electric appliances
ORDERING INFORMATION
Ex. AM
1
5
0
1
K
Type of switch
Upper body cover shape & terminal
Basic specifications
Actuators
NZ basic (AM1) 1: Flat, solder terminal
Upper body cover shape
Flat Grooved
0: Standard type
1: Oil tight type
3: Reversed action type 3: Hinge roller lever (roller, leaf, spring)
0: Pin plunger
1: Hinge lever (leaf spring)
switch
3: Flat, screw terminal
5: Grooved, solder terminal
7: Grooved, screw terminal
4: One way type
4: Hinge short roller lever
5: Overtravel plunger
6: Compact overtravel plunger
7: Panel mount plunger
811: Panel mount roller plunger
812: Panel mount cross roller plunger
Remarks: Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
TERMINAL VARIATION
Standard types, reversed action types and oil tight types are available in two terminal designs, solder and screw terminals, as shown
in the above columns:
Differences in dimension between solder and screw terminals are as follows;
mm
Solder terminal
Screw terminal
6.3
9.1
49.2
49.2
N.O.
CIRCUT
C
NO
NC
17.5
17.5
N.C.
CIRCUT
Terminal plate
19.8
M4 screw P0.7
20.2
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AM1
PRODUCT TYPES
1. Standard type
Actuator
Solder terminal
AM1100K
AM1105K
AM1106K
AM1107K
AM110811K
AM110812K
AM1101K
AM1103K
AM1501K
AM1504K
AM1503K
AM1544K
AM1543K
AM1531K
AM1534K
AM1533K
Screw terminal
AM1300K
AM1305K
AM1306K
AM1307K
AM130811K
AM130812K
AM1301K
AM1303K
AM1701K
AM1704K
AM1703K
AM1744K
AM1743K
AM1731K
AM1734K
AM1733K
Pin plunger
Over travel plunger
Compact over travel plunger
Panel mount plunger
Panel mount roller plunger
Panel mount cross roller plunger
Flexible leaf lever
Flexible roller leaf lever
Rigid lever
Rigid short roller lever
Rigid roller lever
One way type•Rigid short roller lever
One way type•Rigid roller lever
Reversed action type•Rigid lever
Reversed action type •Rigid short roller lever
Reversed action type•Rigid roller lever
2. Oil tight types
Actuator
Solder terminal
AM1511K
Screw terminal
AM1711K
Rigid lever
Rigid short roller lever
Rigid roller lever
AM1514K
AM1714K
AM1513K
AM1713K
Remarks: 1. Standard part number indicates UL/CSA mark.
2. Standard packing for inner carton: 20cps.
SPECIFICATIONS
1. Contact Rating
Motor or lamp load
Resistive load
(cos φ = 1)
Inductive load
(cos φ = 0.6 to 0.7)
Type
Voltage
N.C.
4 A
3 A
1.5 A
—
N.O.
2 A
125 V AC
250 V AC
480 V AC
125 V DC
250 V DC
125 V AC
250 V AC
125 V DC
15 A
15 A
3 A
10 A
10 A
1.5 A
Standard types
One way types
Reversed action types
2 A
0.75 A
—
0.5 A
0.25 A
15 A
10 A
0.5 A
0.05 A
0.03 A
10 A
—
—
3 A
2 A
—
1.5 A
1.0 A
—
Oil tight types
6 A
0.05 A
2. Characteristics
Item
Specifications
Min. 2 ×107 (60 cpm) (at rated overtravel)
Pin plunger types (O.T.: specified value)
Other types (O.T.: specified value)
(Oil tight: Min. 1.5 ×106)
Mechanical
Expected
life
Min. 5 ×106 (60 cpm) (at rated overtravel)
(Oil tight: Min. 1.5 ×106)
Min. 5 ×105 (20 cpm) (at rated load)
Electrical (O.T.: Max.)
(Oil tight: Min. 1.5 ×105)
Insulation resistance
Min. 100 MΩ(at 500 V DC)
1,000 Vrms for 1 min.
2,000 Vrms for 1 min.
2,000 Vrms for 1 min.
Max. 50 mΩ
Single amplitude: 0.75 mm, 10 to 55 Hz (contact opening: max. 1 msec.)
Min. 300 m/s2 (contact opening: max. 1 msec.)
Min. 50 m/s2 (contact opening: max. 1 msec.)
0.1 to 1,000 mm/sec. (at pin plunger position)
240 cpm
Between open terminals
Dielectric
strength
Between each terminal and other exposed metal parts
Between each terminal and ground
Contact resistance (initial) (by voltage drop, 1 A, 6–8 V DC)
Vibration resistance (Pin plunger type)
Pin plunger types
Shock
resistance
Other types
Allowable operating speed (at no load)
Max. operating cycle rate (at no load)
Ambient temperature
–25°C to +80°C (no freezing at low temperature)
Approx. 20 to 55 g
Weight
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AM1
OPERATING CHARACTERISTICS
Standard types
Compact overtravel
plunger
Types of actuator
Pin plunger
Overtravel plunger
Panel mount plunger
Operating force, max.
3.63 N
1.12 N
0.4
Release force, min.
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
0.05
0.13
1.5
1.5
5.6
Operating position, mm
15.9 0.4
28.2 0.5
21.2 0.5
21.8 0.8
Panel mount roller
plunger
Panel mount cross roller
plunger
Types of actuator
Flexible leaf lever
Flexible roller leaf lever
Operating force, max.
Release force, min.
3.63 N
1.47 N
1.12 N
0.4
0.14 N
4
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
0.05
1.3
3.6
1.6
Operating position, mm
33.3 1.2
17.5 0.8
28.6 0.8
Standard types (cont' d)
Types of actuator
Rigid lever
0.69 N
0.14 N
10
Rigid short roller lever
Rigid roller lever
Operating force, max.
Release force, min.
1.57 N
0.42 N
4.5
0.98 N
0.2 N
7.5
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
1.3
0.7
1.3
5.6
2.4
3.6
Operating position, mm
19.1 0.7
30.2 0.4
30.2 0.7
One way types
Types of actuator
Rigid short roller lever
Rigid roller lever
Operating force, max.
Release force, min.
2.23 N
0.42 N
3.5
1.67 N
0.42 N
4.5
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
Free position, max. mm
Operating position, mm
0.4
0.5
1.5
2.4
31.8
43.3
30.2 0.4
41.3 0.4
Reversed action types
Types of actuator
Rigid lever
Rigid short roller lever
Rigid roller lever
Operating force, max.
Release force, min.
1.67 N
0.27 N
5.0
5.30 N
1.67 N
2.5
2.35 N
0.56 N
3.6
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
0.9
0.4
0.7
5.6
2.0
4.0
Operating position, mm
19.1 0.8
30.2 0.5
30.2 0.8
Oil tight types
Types of actuator
Rigid lever
0.69 N
0.14 N
10
Rigid short roller lever
Rigid roller lever
0.98 N
0.20 N
7.5
Operating force, max.
Release force, min.
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
Operating position, mm
1.67 N
0.42 N
4.5
1.5
0.7
1.3
5.6
2.4
3.6
19.1 0.7
30.2 0.4
30.2 0.7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AM1
mm General tolerance: 0.4
DIMENSIONS
1. Standard types
Pin plunger
Operating force,
max.
3.63 N
1.12 N
0.4
23.3 0.3
P. T.
2.4
Release force,
min.
O.P.
14.6
5.4
15
Pretravel,
max. mm
9.1
Movement differential,
max. mm
0.05
+0.1
4.2
dia. hole
−0.05
+0.1
4.2
−0.05
17.5
AM1100K (Solder terminal)
AM1300K (Screw terminal)
Overtravel,
min. mm
0.13
4.5 0.1
25.4 0.1
49.2
11.9
Operating position,
mm
15.9 0.4
Overtravel plunger
Operating force,
max.
3.63 N
1.12 N
0.4
23.3 0.3
4 dia.
6.35 dia.
Release force,
min.
Plunger: Hardening steel
P. T.
Pretravel,
max. mm
8.4
15
O.P.
Movement differential,
max. mm
0.05
Overtravel,
min. mm
AM1105K (Solder terminal)
AM1305K (Screw terminal)
1.5
Operating position,
mm
28.2 0.5
Compact over plunger
Operating force,
max.
3.63 N
1.12 N
0.4
Plunger: Plastic
P.T.
Release force,
min.
0.3
23.3
0.4 max.
7.1 dia.
4.2
Pretravel,
max. mm
O.P.
+0.10
–0.05
0.5
21.2
4.2
14.3 14.5
Movement differential,
max. mm
0.05
Overtravel,
min. mm
AM1106K (Solder terminal)
AM1306K (Screw terminal)
1.5
+0.10
4.2
dia.
–0.05
Operating position,
mm
21.2 0.5
Panel mount plunger
Plunger: Plastic
Operating force,
max.
R8
M12 × P1
3.63 N
1.12 N
0.4
P.T.
0.3
23.3
0.4 max.
8.25 dia.
Release force,
min.
Lock nut
(2 thick)
O.P.
Pretravel,
max. mm
0.8
21.8
Nut (2 thick)
13.1
Movement differential,
max. mm
0.05
0.5
+0.10
–0.05
16
4.2
14.3
Overtravel,
min. mm
5.6
Operating position,
mm
AM1107K (Solder terminal)
AM1307K (Screw terminal)
+0.10
–0.05
4.2
dia.
21.8 0.8
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AM1
mm General tolerance: 0.4
Panel mount roller plunger
Operating force,
max.
3.63 N
1.12 N
0.4
Release force,
min.
P.T.
Roller 12.7 dia. × 4.6
: Plastic
0.4 max.
0.3
23.3
Pretravel,
max. mm
M12 × P1
Movement differential,
max. mm
0.05
O.P.
Nut (2 thick)
1.2
33.3
15.5
Overtravel,
min. mm
3.6
+0.10
–0.05
0.5
4.2
Operating position,
mm
16
14.3
AM110811K (Solder terminal)
AM130811K (Screw terminal)
33.3 1.2
+0.10
4.2
dia.
–0.05
Panel mount cross roller plunger
Operating force,
max.
3.63 N
1.12 N
0.4
Release force,
min.
Roller 12.7 dia. × 4.6
: Plastic
P.T.
0.3
0.4 max.
23.3
Pretravel,
max. mm
M12 × P1
Movement differential,
max. mm
0.05
O.P.
Nut (2 thick)
1.2
33.3
Overtravel,
min. mm
15.5
3.6
+0.10
–0.05
Operating position,
mm
0.5
4.2
16
33.3 1.2
14.3
AM110812K (Solder terminal)
AM130812K (Screw terminal)
+0.10
4.2
dia.
–0.05
Dimensions and Operating characteristics are the same as those of Panel mount roller plunger type. However, the roller joins the switch body at an angle of 90°.
Flexible leaf lever
Operating force,
max.
1.47 N
Release force,
min.
0.14 N
4
49.6 0.8
Leaf: Stainless steel
Pretravel,
max. mm
4.8
Movement differential,
max. mm
F.P.
O.P.
14.6
1.3
Overtravel,
min. mm
AM1101K (Solder terminal)
AM1301K (Screw terminal)
1.6
Operating position,
mm
17.5 0.8
Flexible roller leaf lever
Operating force,
max.
1.47 N
0.14 N
4
Roller 9.5 dia.×4:
Release force,
min.
Plastic
46 0.8
Leaf: Stainless steel
Pretravel,
max. mm
F.P.
O.P.
Movement differential,
max. mm
1.3
14.6
Overtravel,
min. mm
AM1103K (Solder terminal)
AM1303K (Screw terminal)
1.6
Operating position,
mm
28.6 0.8
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AM1
Rigid lever
mm General tolerance: 0.4
Operating force,
max.
0.69 N
0.14 N
10
Lever: Stainless steel
26.1
Release force,
min.
R63.5
4.8
Pretravel,
max. mm
F.P.
Movement differential,
max. mm
20.1 0.5
O.P.
1.3
Overtravel,
min. mm
5.6
AM1501K (Solder terminal)
AM1701K (Screw terminal)
Operating position,
mm
19.1 0.7
Rigid short roller lever
Operating force,
max.
1.57 N
0.42 N
4.5
Roller 9.5 dia.×4:
26.1
Plastic
Release force,
min.
Pretravel,
max. mm
R26.7
Movement differential,
max. mm
F.P.
O.P.
0.7
20.1 0.5
Overtravel,
min. mm
2.4
Operating position,
mm
AM1504K (Solder terminal)
AM1704K (Screw terminal)
30.2 0.4
Rigid roller lever
Operating force,
max.
0.98 N
0.2 N
7.5
Roller 9.5 dia.×4:
Release force,
min.
26.1
Plastic
R48.3
Pretravel,
max. mm
Movement differential,
max. mm
F.P.
1.3
O.P.
20.1 0.5
Overtravel,
min. mm
3.6
AM1503K (Solder terminal)
AM1703K (Screw terminal)
Operating position,
mm
30.2 0.7
2. One way types
This type is operated only to one direction, not to the reversed direction by the construction of the roller lever, pivoting away from the
cam on the return stroke.
Rigid short roller lever
Operating force,
max.
2.23 N
Roller 4.75 dia.×4.75:
Plastic
Release force,
26.1
0.42 N
min.
Pretravel,
3.5
R21.1
max. mm
Movement differential,
0.4
27.8 max.
F.P.
max. mm
O.P.
20.1 0.5
Overtravel,
min. mm
1.5
AM1544K (Solder terminal)
AM1744K (Screw terminal)
Operating position,
mm
30.2 0.4
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AM1
mm General tolerance: 0.4
Rigid roller lever
Operating force,
max.
1.67 N
0.42 N
4.5
Roller 9.5 dia.×4:
Plastic
26.1
Release force,
min.
R31
Pretravel,
max. mm
Movement differential,
max. mm
O.P. F.P.
0.5
34.1 max.
20.1 0.5
Overtravel,
min. mm
2.4
Operating position,
mm
41.3 0.4
AM1543K (Solder terminal)
AM1743K (Screw terminal)
3. Reversed action types
When the actuator is operated, the switching mechanism returns to the free position. Extraordinary force by pushing the plunger too
much is not put on the switching mechanism, which means stability in life.
Rigid lever
Lever: Stainless steel
4.8
18.7
Operating force,
max.
1.67 N
0.27 N
5.0
R56
Release force,
min.
F.P.
20.1 0.5
9.1
O.P.
Pretravel,
max. mm
16.9 0.8
Movement differential,
max. mm
0.9
+0.1
4.2
dia. hole
−0.05
+0.1
4.2
−0.05
Overtravel,
min. mm
4.5 0.1
5.6
17.5
11.9
25.4 0.1
11.9
AM1531K (Solder terminal)
AM1731K (Screw terminal)
Operating position,
mm
49.2
19.1 0.8
Rigid short roller lever
Operating force,
max.
5.30 N
1.67 N
2.5
Roller 9.5 dia.×4:
Plastic
Release force,
min.
18.7
Pretravel,
max. mm
R19
Movement differential,
max. mm
F.P.
O.P.
0.4
20.1 0.5
Overtravel,
min. mm
2.0
AM1534K (Solder terminal)
AM1734K (Screw terminal)
Operating position,
mm
30.2 0.5
Rigid roller lever
Operating force,
max.
2.35 N
0.56 N
3.6
Roller 9.5 dia.×4:
Plastic
Release force,
min.
18.7
R41
Pretravel,
max. mm
Movement differential,
max. mm
F.P.
0.7
O.P.
20.1 0.5
Overtravel,
min. mm
4.0
Operating position,
mm
AM1533K (Solder terminal)
AM1733K (Screw terminal)
30.2 0.8
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AM1
4. Oil tight types
mm General tolerance: 0.4
The pushbutton part is sealed with the rubber cap and the connected part between the cap and body is also coated with resin so that
these parts are kept away from foreign matters. This type has resistance to oil.
Rigid lever
Operating force,
0.69 N
max.
Plunger seal
Lever: Stainless steel
Release force,
0.14 N
min.
26.1
Pretravel,
max. mm
R63.5
4.8
10
1.5
Movement differential,
max. mm
F.P.
20.1 0.5
O.P.
Overtravel,
min. mm
5.6
Operating position,
mm
19.1 0.7
AM1511K (Solder terminal)
AM1711K (Screw terminal)
Rigid short roller lever
Operating force,
max.
1.67 N
0.42 N
4.5
Plunger seal
Roller 9.5 dia.×4:
Release force,
min.
Plastic
26.1
Pretravel, max.
mm
R26.7
Movement differential,
max. mm
F.P.
O.P.
0.7
20.1 0.5
16.9 0.8
Overtravel,
min. mm
2.4
AM1514K (Solder terminal)
AM1714K (Screw terminal)
Operating position,
mm
30.2 0.4
Rigid roller lever
Operating force,
max.
0.98 N
0.20 N
7.5
Roller 9.5 dia.×4:
Plunger seal
Plastic
Release force,
min.
26.1
R48.3
Pretravel,
max. mm
F.P.
Movement differential,
max. mm
O.P.
1.3
20.1 0.5
16.9 0.8
Overtravel,
min. mm
3.6
Operating position,
mm
AM1513K (Solder terminal)
AM1713K (Screw terminal)
30.2 0.7
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AM1
NOTES
1. Regarding fastening of switch body
1) In fastening the switch body, use M4
mounting screws to attach switches with
the torque 1.5 N·m or less.
3. Soldering operations
Soldering should be done in less than 5
seconds, with a 60 watt iron (tip
temperature = 350°C max.). Care should
be taken not to apply force to the terminal
during soldering.
2) After mounting and wiring, the
insulation distance between ground and
each terminal should be confirmed as
sufficient.
4. Avoid using switches in the
following conditions:
2. Adjustment of the operating device
The operating device should be
• In corrosive gases such as hydrogen
sulfide.
positioned so that it applies no stress to
the pushbutton or actuator when the
switch is in the open position. If this
condition is exceeded, the mechanical
and electrical performance will be
impaired. In addition, the force applied by
the operating device should be in a
perpendicular direction. Even if the
pushbutton is used in the full total travel
position, there will be no influence on the
life of the switch.
• In flammable or explosive gases such
as gasoline or thinner etc.
• In a dusty environment.
• In an ambient humidity over 85%.
• In conditions where the perpendicular
operating speed is less than 0.1 mm/sec.
or more than 1,000 mm/sec.
• In a silicon atmosphere.
5. Others
Caution should be taken not to drop
switches.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明