ALZ11B09T [PANASONIC]

Power/Signal Relay, 1 Form C, SPDT, Momentary, 0.044A (Coil), 9VDC (Coil), 400mW (Coil), DC Input, Random, AC Output, Through Hole-Straight Mount,;
ALZ11B09T
型号: ALZ11B09T
厂家: PANASONIC    PANASONIC
描述:

Power/Signal Relay, 1 Form C, SPDT, Momentary, 0.044A (Coil), 9VDC (Coil), 400mW (Coil), DC Input, Random, AC Output, Through Hole-Straight Mount,

PC 光电二极管 继电器
文件: 总4页 (文件大小:879K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
VDE  
16A LOW PROFILE  
POWER RELAY  
LZ RELAYS (ALZ)  
5. Conforms to the various safety  
standards:  
UL, C-UL, VDE approved.  
6. Superior heat resistance and  
tracking resistance  
FEATURES  
1. Low profile type with height of  
15.7 mm  
Slim, low profile type with dimensions of  
28.8 (L) 12.5 (W) 15.7 (H) mm  
1.134 (L) .492 (W) .618 (H) inch.  
2. High insulation resistance  
Superior insulation characteristics have  
been achieved by maintaining an  
insulation distance between coil and  
contacts of at least 10 mm for both  
creepage distance and clearances.  
Furthermore, anti-surge voltage is 10 kV  
and higher. (Supports European  
reinforced insulation requirement.)  
3. Superior heat resistance  
EN60335-1 GWT compliant (Tested by  
VDE) type available.  
TYPICAL APPLICATIONS  
1) Household electrical appliances  
TV, CATV, Audio equipment, Microwave  
ovens, and Heaters, etc.  
2) Office equipment  
Copy machines, Packaged air  
conditioners, and Vending machines  
3) Industrial equipment  
Machine tools, Robots, and Temperature  
controllers  
Can be used in ambient temperatures up  
to 85C 185F for the class B and 105C  
221F for the class F.  
4. Low operating power  
Power saved with a nominal operating  
power of only 400 mW.  
ORDERING INFORMATION  
ALZ  
LZ relays  
Contact arrangement  
1: 1 Form C  
5: 1 Form A  
Protective construction  
1: Flux-resistant type  
2: Sealed type  
Coil insulation class  
B: Class B insulation  
F: Class F insulation  
Coil voltage (DC)  
05: 5 V 18: 18 V  
09: 9 V 24: 24 V  
12: 12 V 48: 48 V  
Flame resistance and tracking resistance  
Nil:  
T: EN60335-1 (Conform)  
Packing style  
Nil: Tube packing  
W: Carton packing  
Note: UL, C-UL, VDE approved type is standard.  
ds_61B15_en_lz: 140911D  
1
LZ (ALZ)  
TYPES  
1. Flux-resistant type  
Flux-resistant type  
Packing style  
Contact arrangement  
Coil voltage  
Class B insulation  
Class F insulation  
Part No.  
Tube packing  
Inner carton Case  
Carton packing  
Part No.  
Inner carton  
Case  
5 V DC  
9 V DC  
ALZ11B05W  
ALZ11B09W  
ALZ11B12W  
ALZ11B18W  
ALZ11B24W  
ALZ11B48W  
ALZ51B05W  
ALZ51B09W  
ALZ51B12W  
ALZ51B18W  
ALZ51B24W  
ALZ51B48W  
ALZ11F05W  
ALZ11F09W  
ALZ11F12W  
ALZ11F18W  
ALZ11F24W  
ALZ11F48W  
ALZ51F05W  
ALZ51F09W  
ALZ51F12W  
ALZ51F18W  
ALZ51F24W  
ALZ51F48W  
12 V DC  
18 V DC  
24 V DC  
48 V DC  
5 V DC  
1 Form C  
20 pcs.  
800 pcs.  
100 pcs.  
500 pcs.  
9 V DC  
12 V DC  
18 V DC  
24 V DC  
48 V DC  
1 Form A  
(New PC board terminal)  
2. Sealed type  
Sealed type  
Packing style  
Contact arrangement  
Coil voltage  
Class B insulation  
Part No.  
Class F insulation  
Part No.  
Tube packing  
Carton packing  
Inner carton  
Case  
Inner carton  
Case  
5 V DC  
9 V DC  
ALZ12B05W  
ALZ12B09W  
ALZ12B12W  
ALZ12B18W  
ALZ12B24W  
ALZ12B48W  
ALZ52B05W  
ALZ52B09W  
ALZ52B12W  
ALZ52B18W  
ALZ52B24W  
ALZ52B48W  
ALZ12F05W  
ALZ12F09W  
ALZ12F12W  
ALZ12F18W  
ALZ12F24W  
ALZ12F48W  
ALZ52F05W  
ALZ52F09W  
ALZ52F12W  
ALZ52F18W  
ALZ52F24W  
ALZ52F48W  
12 V DC  
18 V DC  
24 V DC  
48 V DC  
5 V DC  
1 Form C  
20 pcs.  
800 pcs.  
100 pcs.  
500 pcs.  
9 V DC  
12 V DC  
18 V DC  
24 V DC  
48 V DC  
1 Form A  
(New PC board terminal)  
Notes: 1. If you desire tube packaging, please order without adding the packaging symbol “W” to the end of the part number.  
2. Carton packing symbol “W” is not marked on the relay.  
3. EN60335-1 GWT compliant types available. When ordering, please add suffix “T”.  
Ex. ALZ51B12T, ALZ51F12TW  
RATING  
1. Coil data  
Nominal operating  
current  
[10%] (at 20°C 68F)  
Nominal operating  
power  
(at 20°C 68F)  
Nominal coil  
voltage  
Pick-up voltage  
(at 20°C 68F)  
Drop-out voltage  
(at 20°C 68F)  
Coil resistance  
[10%] (at 20°C 68F)  
Max. applied voltage  
(at 20°C 68F)  
5 V DC  
9 V DC  
80 mA  
44.4 mA  
33.3 mA  
22.2 mA  
16.7 mA  
8.3 mA  
63  
203  
Max. 70%V  
nominal voltage  
(Initial)  
Min. 10%V  
nominal voltage  
(Initial)  
12 V DC  
18 V DC  
24 V DC  
48 V DC  
360  
130%V of  
nominal voltage  
400 mW  
810  
1,440  
5,760  
ds_61B15_en_lz: 140911D  
2
LZ (ALZ)  
2. Specifications  
Characteristics  
Item  
Specifications  
Arrangement  
1 Form C, 1 Form A  
Contact  
Contact resistance (Initial)  
Contact material  
Max. 100 m(By voltage drop 6V DC 1A)  
AgSnO2 type  
16A 250V AC  
4,000V A  
Nominal switching capacity (resistive load)  
Max. switching power (resistive load)  
Max. switching voltage  
440V AC  
Rating  
Max. switching current  
16A  
Nominal operating power  
Min. switching capacity*1  
400mW  
100mA 5V DC  
Min. 1,000M(at 500V DC)  
Insulation resistance (Initial)  
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA)  
Breakdown voltage  
(Initial)  
Between contact and  
5,000 Vrms for 1min. (Detection current: 10mA)  
coil  
Electrical  
characteristics  
Max. 55C 131F  
Temperature rise (at 20C 68F)  
[with nominal coil voltage and at 16A contact carrying current (resistance method) at 20°C 68F]  
Surge breakdown voltage*2  
(Between contacts and coil)  
10,000 V (Initial)  
Operate time (at nominal voltage) (at 20C 68F) Max. 15ms (excluding contact bounce time)  
Release time (at nominal voltage) (at 20C 68F) Max. 5ms (excluding contact bounce time, without diode)  
Functional  
Destructive  
Min. 100 m/s2 {10G} (Half-wave pulse of sine wave: 11ms; detection time: 10s.)  
Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6ms.)  
Shock resistance  
Mechanical  
characteristics  
10 to 55 Hz at double amplitude of 1.5mm (Detection time: 10s.)  
(Only the N.C. side of 1 Form C is 0.8mm)  
Functional  
Destructive  
Vibration resistance  
10 to 55 Hz at double amplitude of 1.5mm  
Min. 107  
N.O.: Min. 105, N.C.: Min. 5104  
Mechanical (at 180 cpm)  
Electrical (at 20 cpm)  
Expected life  
Ambient temperature: –40C to +85C –40F to +185F (Class B)  
Conditions for operation, transport and storage*3, *4  
Max. operating speed  
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)  
Conditions  
Unit weight  
20 cpm (at nominal switching capacity)  
Approx. 12 g .42 oz  
*1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.  
*2Wave is standard shock voltage of 1.2 50s according to JEC-212-1981  
*3Class F type is ambient temperature 105°C +221F.  
*4The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport  
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.  
*Please note that some of the specifications listed above may not comply with overseas standards.  
REFERENCE DATA  
1. Max. switching power (AC resistive load)  
2. Max. switching power (DC resistive load)  
3. Coil temperature rise  
Sample: ALZ11F12, 5pcs.  
Measured portion: coil inside  
Contact current: 0 A, 16 A  
55  
100  
100  
10  
1
0A  
16A  
Normal  
temperature  
50  
45  
40  
Normal  
temperature  
16  
10  
85°C  
85°C  
105°C  
105°C  
35  
30  
25  
20  
1
0
100 105 110 115 120 125 130 135  
Coil applied voltage, %V  
1
10  
30  
100  
440 1000  
0
10  
100  
Contact voltage, V  
Contact voltage, V  
ds_61B15_en_lz: 140911D  
3
LZ (ALZ)  
DIMENSIONS (mm inch)  
Download CADData from our Web site.  
1. 1 Form A type  
CAD Data  
PC board pattern  
5
.197  
15.7  
.618  
6-1.3 dia.  
6-.051 dia.  
0.5  
.020  
7.5  
.295  
0.5  
0.5  
0.8  
3.5  
.020  
.020  
.031  
.138  
2.5  
20  
5
7.5  
20  
.098  
.787  
.197  
.295  
.787  
28.8  
12.5  
1.134  
.492  
Tolerance: 0.1 .004  
Schematic (Bottom view)  
Coil  
Dimension:  
Tolerance  
Less than 1 mm.039inch:  
0.1.004  
Min. 1 mm.039inch less than 3 mm.118inch: 0.2.008  
Min. 3 mm.118inch:  
0.3.012  
2. 1 Form C type  
CAD Data  
PC board pattern  
5
5
.197 .197  
15.7  
.618  
8-1.3 dia.  
8-.051 dia.  
0.5  
.020  
7.5  
.295  
0.5  
0.5  
0.8  
.020  
.020  
.031  
7.5  
3.5  
5
5
.138  
20  
.197 .197  
.295  
.787  
2.5  
20  
12.5  
.098  
.787  
.492  
Tolerance: 0.1 .004  
28.8  
1.134  
Schematic (Bottom view)  
Coil  
Dimension:  
Tolerance  
Less than 1 mm.039inch:  
0.1.004  
Min. 1 mm.039inch less than 3 mm.118inch: 0.2.008  
Min. 3 mm.118inch: 0.3.012  
SAFETY STANDARDS  
UL/C-UL (Recognized)  
VDE (Certified)  
TV rating (UL/CSA)  
File No. Rating  
C-UL TV-5  
E43149  
File No.  
E43149  
Contact rating  
File No.  
40000380  
Contact rating  
16A 250V AC (cos=1.0)  
16A 277V AC, 34.8LRA/7.2FLA/120V AC, 15LRA/3FLA/120V AC  
10LRA/3FLA 240V AC, 20A 240V AC (N.O. only)  
16A 30V DC, 25A 240V AC, 15A 240V AC Resistive load 105C (N.O. only)  
* CSA standard: Certified by C-UL  
For Cautions for Use, see Relay Technical Information.  
ds_61B15_en_lz: 140911D  
4

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY