LA-W5SN [OSRAM]
white SMD package, colorless clear silicone;型号: | LA-W5SN |
厂家: | OSRAM GMBH |
描述: | white SMD package, colorless clear silicone |
文件: | 总20页 (文件大小:410K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Platinum DRAGON
Enhanced thin film LED
Lead (Pb) Free Product - RoHS Compliant
LR W5SN, LA W5SN, LY W5SN
Vorläufige Daten / Preliminary Data
Besondere Merkmale
Features
•
Gehäusetyp: weißes SMD-Gehäuse, farbloser
klarer Silikon - Verguss
•
package: white SMD package, colorless clear
silicone
•
Typischer Lichtfluss: 89 lm (rot),
105 lm (amber), 80 lm (gelb) bei 700 mA und bis
zu 115 lm (rot), 126 lm (amber), 93 lm (gelb) bei 1
A
•
typical Luminous Flux: 89 lm (red),
105 lm (amber), 80 lm (yellow) at 700 mA and up
to 115 lm (red), 126 lm (amber), 93 lm (yellow)
feature of the device: point lightsource with high
luminous efficiency and low space
wavelength: 625 nm (red), 617 nm (amber),
590 nm (yellow)
•
•
•
•
Besonderheit des Bauteils: Punktlichtquelle mit
hoher Lichtausbeute bei geringem Platzbedarf
Wellenlänge: 625 nm (rot), 617 nm (amber),
590 nm (gelb)
•
•
•
viewing angle: Lambertian Emitter (120°)
technology: Thinfilm InGaAlP
•
•
•
Abstrahlwinkel: Lambertscher Strahler (120°)
Technologie: Dünnfilm InGaAlP
optischer Wirkungsgrad: 65 lm/W (rot),
86 lm/W (amber), 68 lm/W (gelb) bei 100 mA
Gruppierungsparameter: Lichtstrom,
Wellenlänge
optical efficiency: 65 lm/W (red),
86 lm/W (amber), 68 lm/W (yellow) at 100 mA
grouping parameter: luminous flux, wavelength
assembly methods: suitable for SMT assembly
methods
•
•
•
•
Verarbeitungsmethode: für
•
•
•
•
soldering methods: reflow soldering
preconditioning: acc. to JEDEC Level 2
taping: 24-mm tape with 800/reel, ø180 mm
ESD-withstand voltage: up to 8 kV acc. to
JESD22-A114-D
Superior Corrosion Robustness:
details see page 11
SMT-Bestücktechniken geeignet
Lötmethode: Reflow Löten
•
•
•
•
Vorbehandlung: nach JEDEC Level 2
Gurtung: 24-mm Gurt mit 800/Rolle, ø180 mm
ESD-Festigkeit: ESD-sicher bis 8 kV nach
JESD22-A114-D
•
•
Erweiterte Korrosionsfestigkeit:
Details siehe Seite 11
Anwendungen
Applications
•
•
Verkehrssignale
•
•
traffic signaling
Hinterleuchtung (Werbebeleuchtung,
Allgemeinbeleuchtung)
backlighting (illuminated advertising, general
lighting)
•
Innen- und Außenbeleuchtung im Automobilbe-
reich, z. B. Instrumentenbeleuchtung, Heckleuch-
te
•
Interior and exterior automotive lighting
e.g. dashboard backlighting, rear combination
lamp (RCL)
•
•
•
•
•
Ersatz von Kleinst-Glühlampen
Tragbare Beleuchtung z. B. am Fahrrad
Dekorative Lichtleiter-Anwendungen
Signal- und Symbolleuchten zur Orientierung
Markierungsbeleuchtung (z.B. Stufen, Fluchtwe-
ge, u.ä.)
•
•
•
substitution of micro incandescent lamps
portable light souce (e. g. bicycle)
decorative and entertainment lighting (incl. fiber
optic illumination)
•
•
•
signal and symbol luminaire for orientation
marker lights (e.g. steps, exit ways, etc.)
indoor and outdoor commercial and residential
architectural lighting
•
•
Fassadenbeleuchtung im Innen- und
Außenbereich
Hinterleuchtung für LC-Displays
•
LCD backlighting
2010-09-08
1
LR W5SN, LA W5SN, LY W5SN
Bestellinformation
Ordering Indormation
Typ
Emissions-
farbe
Color of
Emission
Lichtstrom1) Seite 20 Lichtstärke2) Seite 20
Bestellnummer
Ordering Code
Type
Luminous
Flux1) page 20
IF = 700 mA
ΦV (mlm)
Luminous
Intensity2) page 20
IF = 700 mA
IV (mcd)
LA W5SN-JZKZ-24
LR W5SN-JYKY-1
amber
red
61.000 ... 112.000
52.000 ... 97.000
28.800 (typ.)
24.800 (typ.)
Q65110A6010
Q65110A6011
LY W5SN-KXLX-35
LY W5SN-KXLX-46
yellow
71.000 ... 130.000
71.000 ... 130.000
33.500 (typ.)
33.500 (typ.)
Q65111A0327
Q65111A0328
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen
Helligkeitsgruppen (siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro
Gurt geliefert. Z.B.: LA W5SN-JZKZ-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen JZ, KX,
KY oder KZ enthalten ist.
Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird
nur eine Wellenlängengruppe geliefert. Z.B.: LA W5SN-JZKZ24 bedeutet, dass auf dem Gurt nur eine der
Wellenlängengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 für nähere Information).
Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
Note:
The above Type Numbers represent the order groups which include only a few brightness groups (see page 5
for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each
reel). E.g. LA W5SN-JZKZ-24 means that only one group JZ, KX, KY or KZ will be shippable for any one reel.
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups
will be shipped on any one reel. E.g. LA W5SN-JZKZ-24 means that only 1 wavelength group -2, -3, or -4 will
be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for
explanation).
2010-09-08
2
LR W5SN, LA W5SN, LY W5SN
Grenzwerte
Maximum Ratings
(TS=25°C)
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
Betriebstemperatur
Operating temperature range
Top
– 40 … + 125
– 40 … + 125
175*
°C
Lagertemperatur
Storage temperature range
Tstg
°C
Sperrschichttemperatur für Kurzzeitanwendungen Tj
°C
Junction temperature for short term applications
Sperrschichttemperatur
Junction temperature
Tj
+ 135
°C
Durchlassstrom
Forward current
(TS=25°C)
IF
1000
100
mA
mA
(min.) IF
Stoßstrom
Surge current
t ≤ 10 μs, D = 0.1; TS=25°C
IFM
2500
mA
V
Sperrspannung
Reverse voltage
(TS=25°C)
VR
not designed for
reverse operation
*Auch bei höchsten Temperaturen zeigt der LED Chip sehr gute Leistungsmerkmale, aber es kann eine leichte
Verfärbung des Gehäuses auftreten.
Die mittlere Lebensdauer bei Tj = 175°C beträgt 100h.
*The LED chip exhibits excellent performance but slight package discoloration occurs at highest temperatures.
Exemplary median lifetime for Tj = 175°C is 100h.
2010-09-08
3
LR W5SN, LA W5SN, LY W5SN
Kennwerte
Characteristics
(TS = 25 °C)
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
red
amber
yellow
Wellenlänge des emittierten Lichtes
Wavelength at peak emission
IF = 700 mA
(typ.) λpeak
632
624
597
nm
Dominantwellenlänge3) Seite 20
Dominant wavelength3) page 20
IF = 700 mA
(min.) λdom
(typ.) λdom
(max.) λdom
620
625
632
612
617*
624
583
590*
595
nm
nm
nm
Spektrale Bandbreite bei 50 % Φrel max
Spectral bandwidth at 50 % Φrel max
IF = 700 mA
(typ.) Δλ
18
18
18
nm
Abstrahlwinkel bei 50 % ΙV (Vollwinkel)
Viewing angle at 50 % ΙV
(typ.) 2ϕ
120
120
120
Grad
deg.
Durchlassspannung4) Seite 20
Forward voltage4) page 20
IF = 700 mA
(min.) VF
(typ.) VF
(max.) VF
2.1
2.45
3.3
2.1
2.5
3.3
2.1
2.55
3.3
V
V
V
Sperrstrom
Reverse current
IR
not designed for
reverse operation
(max.) IR
Wärmewiderstand
Thermal resistance
Sperrschicht/Lötpad
Junction/solder point
K/W
K/W
(typ.)
(max.)
Rth JS
Rth JS
6.5
11**
6.5
11**
6.5
11**
* Einzelgruppen siehe Seite 5
Individual groups on page 5
**Rth(max) basiert auf statistischen Werten
Rth(max) is based on statistic values
2010-09-08
4
LR W5SN, LA W5SN, LY W5SN
Wellenlängengruppen (Dominantwellenlänge)3) Seite 20
Wavelength Groups (Dominant Wavelength)3) page 20)
Gruppe
Group
amber
amber
Einheit
Unit
gelb
yellow
min.
612
616
620
max.
min.
max.
2
3
4
5
6
616
620
624
nm
nm
nm
nm
nm
583
586
589
592
586
589
592
595
Helligkeits-Gruppierungsschema
Brightness Groups
Helligkeitsgruppe
Brightness Group
Lichtstrom1) Seite 20
Luminous Flux1) page 20
ΦV (mlm)
Lichtstärke2) Seite 20
Luminous Intensity2) page 20
IV (mcd)
JY
JZ
KX
KY
KZ
LX
52.000 … 61.000
61.000 … 71.000
71.000 … 82.000
82.000 … 97.000
97.000 … 112.000
112.000 …130.000
18.800 (typ.)
22.000 (typ.)
25.500 (typ.)
30.000 (typ.)
34.800 (typ.)
40.300 (typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus
wenigen Helligkeitsgruppen.
Einzelne Helligkeitsgruppen sind nicht bestellbar.
Note: The standard shipping format for serial types includes a family group of only a few individual brightness
groups.
Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: JY-3
Example: JY-3
Helligkeitsgruppe
Brightness Group
Wellenlänge
Wavelength
JY
3
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppen für jede Selektion enthalten.
Note: No packing unit / tape ever contains more than one group for each selection.
2010-09-08
5
LR W5SN, LA W5SN, LY W5SN
Relative spektrale Emission2) Seite 20
Relative Spectral Emission2) page 20
V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve
Φ
rel = f (λ); TS = 25 °C; IF = 700 mA
OHL11701
100
%
Φrel
80
Vλ
60
40
20
0
yellow
amber
red
400
450
500
550
600
650
nm
700
λ
Abstrahlcharakteristik2) Seite 20
Radiation Characteristic2) page 20
Ι
rel = f (ϕ); TS =25°C
OHL01660
40˚
30˚
20˚
10˚
0˚
1.0
ϕ
50˚
0.8
0.6
0.4
0.2
0
60˚
70˚
80˚
90˚
100˚
1.0
0.8
0.6
0.4
0˚
20˚
40˚
60˚
80˚
100˚
120˚
2010-09-08
6
LR W5SN, LA W5SN, LY W5SN
Durchlassstrom2)4) Seite 20
Forward Current2)4) page 20
IF = f (VF); TS = 25 °C; red
solid line: specified DC-range
Durchlassstrom2)4) Seite 20
Forward Current2)4) page 20
IF = f (VF); TS = 25 °C; amber
solid line: specified DC-range
OHL04411
OHL04412
1000
1000
mA
mA
IF
IF
800
700
600
500
400
300
200
100
800
700
600
500
400
300
200
100
0
0
1.6 1.8 2.0 2.2 2.4 2.6
V 3.0
1.6 1.8 2.0 2.2 2.4 2.6 V 2.8
VF
VF
Durchlassstrom2)4) Seite 20
Forward Current2)4) page 20
IF = f (VF); TS = 25 °C; yellow
solid line: specified DC-range
OHL04413
1000
mA
IF
800
700
600
500
400
300
200
100
0
1.6 1.8 2.0 2.2 2.4 2.6
V 3.0
VF
2010-09-08
7
LR W5SN, LA W5SN, LY W5SN
Relativer Lichtstrom2) Seite 20
Relativer Lichtstrom2) Seite 20
Relative Luminous Flux2) page 20
ΦV/ΦV(700 mA) = f (IF); TS = 25 °C; red
Relative Luminous Flux2) page 20
ΦV/ΦV(700 mA) = f (IF); TS = 25 °C; amber
Relativer Lichtstrom2) Seite 20
Relative Luminous Flux2) page 20
ΦV/ΦV(700 mA) = f (IF); TS = 25 °C; yellow
2010-09-08
8
LR W5SN, LA W5SN, LY W5SN
Relative Spannung2)4) Seite 20
Relative Voltage2)4) page 20
ΔVF = VF - VF(25 °C) = f (Tj); IF = 700 mA;
red, amber
Relative Spannung2)4) Seite 20
Relative Voltage2)4) page 20
ΔVF = VF - VF(25 °C) = f (Tj); IF = 700 mA;
yellow
OHL04417
OHL04418
0.25
0.20
V
V
ΔVF
ΔVF
0.15
0.10
0.10
0.05
0
0.05
0
-0.05
-0.10
-0.15
-0.05
-0.10
-0.15
-40 -20
0
20 40 60 80 ˚C 120
-40 -20
0
20 40 60 80 ˚C 120
Tj
Tj
2010-09-08
9
LR W5SN, LA W5SN, LY W5SN
Relativer Lichtstrom2) Seite 20
Relativer Lichtstrom2) Seite 20
Relative Luminous Flux2) page 20
ΦV/ΦV(25 °C)= f (Tj); IF = 700 mA; red
Relative Luminous Flux2) page 20
ΦV/ΦV(25 °C)= f (Tj); IF = 700 mA; amber
OHL14420
OHL14419
1.6
1.6
ΦV
ΦV
Φ
V (25 ˚C)
Φ
V (25 ˚C)
1.2
1.2
1.0
1.0
0.8
0.8
0.6
0.6
0.4
0.4
0.2
0.2
0
0
-40 -20
0
20 40 60 80 ˚C 120
-40 -20
0
20 40 60 80 ˚C 120
T
T
j
j
Relativer Lichtstrom2) Seite 20
Relative Luminous Flux2) page 20
ΦV/ΦV(25 °C)= f (Tj); IF = 700 mA; yellow
OHL14421
2.5
ΦV
Φ
V (25 ˚C)
2.0
1.5
1.0
0.5
0
-40 -20
0
20 40 60 80 ˚C 120
T
j
2010-09-08
10
LR W5SN, LA W5SN, LY W5SN
Dominante Wellenlänge2) Seite 20
Dominant Wavelength2) page 20
Dominante Wellenlänge2) Seite 20
Dominant Wavelength2) page 20
λ
dom = f (Tj); IF = 700 mA; red
λ
dom = f (Tj); IF = 700 mA; amber
OHL04422
OHL04423
8
8
nm
nm
Δλdom
Δλdom
6
4
6
4
2
2
0
0
-2
-4
-6
-2
-4
-6
-40 -20
0
20 40 60 80 ˚C 120
-40 -20
0
20 40 60 80 ˚C 120
Tj
Tj
Dominante Wellenlänge2) Seite 20
Dominant Wavelength2) page 20
λ
dom = f (Tj); IF = 700 mA; yellow
OHL04424
15
nm
Δλdom
10
5
0
-5
-10
-40 -20
0
20 40 60 80 ˚C 120
Tj
2010-09-08
11
LR W5SN, LA W5SN, LY W5SN
Maximal zulässiger Durchlassstrom
Max. Permissible Forward Current
IF = f (TS)
Zu Lebensdauerangaben siehe
Applikationsschrift:“Reliability of the DRAGON
Product Family“
For life time information please refer to application
note“Reliability of the DRAGON Product
Family“
OHL02947
1100
mA
IF
900
800
700
600
500
400
300
200
100
0
Do not use current below 100 mA
20 40 60 80 100 ˚C 140
0
T
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TS = 85 °C
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TS = 25 °C
OHL02878
OHL02878
2.8
A
2.8
A
tP
tP
tP
tP
IF
IF
IF
IF
D
= T
D
= T
T
T
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
D
=
D
=
0.005
0.01
0.02
0.05
0.1
0.005
0.01
0.02
0.05
0.1
0.2
0.2
0.5
0.5
1
1
10-5 10-4 10-3 10-2 10-1 100 101 s 102
10-5 10-4 10-3 10-2 10-1 100 101 s 102
tp
tp
2010-09-08
12
LR W5SN, LA W5SN, LY W5SN
Maßzeichnung6) Seite 20
Package Outlines6) page 20
Anm.: Die LED enthält ein ESD-Bauteil, das parallel zum Chip geschalten ist.
Note: LED is protected by ESD device which is connected in parallel to LED-Chip.
Korrosionsfestigkeit besser als EN 60068-2-60 (method 4):
mit erweitertem Korrosionstest: 40°C / 90%rh / 15ppm H2S / 336h
Corrosion robustness better than EN 60068-2-60 (method 4):
with enhanced corrosion test: 40°C / 90%rh / 15ppm H2S / 336h
Kathodenkennung:
Cathode mark:
Gewicht / Approx. weight:
Markierung
mark
0.2 g
Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet
Note: Package not suitalbe for ultra sonic cleaning
2010-09-08
13
LR W5SN, LA W5SN, LY W5SN
Gurtung / Polarität und Lage6) Seite 20
Verpackungseinheit 800/Rolle, ø180 mm
Packing unit 800/reel, ø180 mm
Method of Taping / Polarity and Orientation6) page 20
Cathode/Collector Side
4 (0.157)
0.3 (0.012)
0.3 (0.012)
1.55 (0.061)
2 (0.079)
6.35 (0.250)
8 (0.315)
1.9 (0.075)
OHAY0508
2010-09-08
14
LR W5SN, LA W5SN, LY W5SN
Empfohlenes Lötpaddesign6) Seite 20
Recommended Solder Pad6) page 20
Reflow Löten
Reflow Soldering
Achtung:
Anode und
Heatsink sind
elektrisch
verbunden
3 Lötstellen
3 solder points
Thermisch optimiertes PCB
Thermal enhanced PCB
11.6 (0.457)
1.6 (0.063)
Attention:
Anode and
Heatsink are
electrically
connected
ø4.0 (0.157)
Heatsink attach
Footprint
12.0 (0.472)
11.6 (0.457)
Empfohlene
Padgeometrie
Recommended
Solder Pad
Design
Lötstopplack
Solder resist
Lötpasten Schablone
Solder paste stencil
ø2.5 (0.098)
ø4.0 (0.157)
1.6 (0.063)
1 (0.039)
Kupfer
Copper
Freies Kupfer
Bare Copper
OHPY3637
2010-09-08
15
LR W5SN, LA W5SN, LY W5SN
Lötbedingungen
Soldering Conditions
Vorbehandlung nach JEDEC Level 2
Preconditioning acc. to JEDEC Level 2
Reflow Lötprofil für bleifreies Löten
Reflow Soldering Profile for lead free soldering
(nach J-STD-020C)
(acc. to J-STD-020C)
OHLA0687
300
Maximum Solder Profile
Recommended Solder Profile
Minimum Solder Profile
˚C
+0 ˚C
-5 ˚C
260 ˚C
245 ˚C
235 ˚C
255 ˚C
240 ˚C
250
T
5 ˚C
+5 ˚C
-0 ˚C
217 ˚C
10 s min
200
150
100
50
30 s max
Ramp Down
6 K/s (max)
100 s max
120 s max
Ramp Up
3 K/s (max)
25 ˚C
0
0
50
100
150
200
250
s
300
t
2010-09-08
16
LR W5SN, LA W5SN, LY W5SN
Barcode-Produkt-Etikett (BPL)
Barcode-Product-Label (BPL)
OSRAM Opto
Semiconductors
Bin1: Bin Information Color 1
Lx xxxx
Bin2:
Product Name
Bin3:
RoHS Compliant ML Temp ST
(6P) BATCH NO: Batch Number
2
260 C RT
Bar Code
Additional TEXT
R077
(1T) LOT NO: Lot Number
(9D) D/C: Date Code
DEMY
PACKVAR: Packing Type
Bar Code
(X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel
(G) GROUP: X - X - X
Forward Voltage Group
Wavelength Group
Bar Code
Brightness Group
Sample
OHA12043
Gurtverpackung
Tape and Reel
W1
D0
P0
P2
Label
P1
Direction of unreeling
Direction of unreeling
W2
Gurtvorlauf: 400 mm
Leader:
Gurtende: 160 mm
Trailer: 160 mm
400 mm
OHAY0324
Tape dimensions in mm (inch)
W
P0
P1
P2
2 ± 0.1
D0
1.5 + 0.1
E
F
4 ± 0.1
8 ± 0.1
1.75 ± 0.1
11.5 ± 0.1
+ 0.3
– 0.1
24
(0.157 ± 0.004) (0.315 ± 0.004) (0.079 ± 0.004) (0.059 + 0.004) (0.069 ± 0.004) (0.453 ± 0.004)
Reel dimensions in mm (inch)
A
W
Nmin
W1
W2 max
180 (7)
24 (0.945)
60 (2.362)
24.4 + 2 (0.961 + 0.079)
30.4 (1.197)
2010-09-08
17
LR W5SN, LA W5SN, LY W5SN
Trockenverpackung und Materialien
Dry Packing Process and Materials
Moisture-sensitive label or print
Barcode label
OSRAM
Humidity indicator
Barcode label
D
o
n
o
t
e
a
t
.
A v o i d m e t a l c o n t a c t .
D i s c a r d i f c i r c l e s o v e r r u n .
b a g o p e n i n g .
P l e a s e c h e c k t h e H I C i m m i d i a t e l y a f t e r
c h e c k d o t
C o m p a r a t o r
W E T
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 5 %
I f w e t ,
b a k e u n i t s
e x a m i n e u n i t s , i f n e c e s s a r y
1 0 %
I f w e t ,
c h a n g e d e s i c c a n t
p a r t s s t i l t e l y d r y .
I f w e t ,
%
M I L - I - 8 8 3 5
H u m i d i t y I n d i c a t o r
OSRAM
Desiccant
OHA00539
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und
einer Feuchteindikatorkarte
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im
Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter
anderem ein Auszug der JEDEC-Norm, enthalten.
Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter
“Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Kartonverpackung und Materialien
Transportation Packing and Materials
Barcode label
Barcode label
20
0
-
1-
Q
-2
1
:
P
-1
T
S
R
in
2:
B
in
:
p
m
B
i
n3
C
Y
M
6
B
e
R
7
T
2
0
C
T
R
E
D
6
D
L
2
0
2
T
X
T
E
M
C
6
l
T
E
Y
2
24
0
S
P
2a
8
1
L
O
na
T
3
tio
: R
-
1
Q
ti
d
di
A
R
+
-
1
l
A
u
0
77
K
V
M
R
C
: P
P
A
P
U
O
R
G
)
(G
4
4
1
0
:
ptors
ct
/C
o
D
D)
(9
O
M
co
du
A
i
n
: 210021998
00
0
2
R
em
4
S
O
S
NO
23
:
H
1
TY
)Q
TC
H
A
G
(Q
)
B
23
: 1
P
(6
O
N
2
5
T
4
1
L
O
0
T
)
1
0
(1
1
:
O
N
D
O
R
P
)
(X
20
0
-
1-
Q
-2
1
:
P
-1
T
S
R
in
2:
B
in
:
p
m
B
i
n3
C
Y
M
6
B
e
R
7
T
2
0
C
T
R
E
D
6
D
L
2
0
2
T
X
T
E
M
C
Y
L
2
24
6
0
E
l
T
S
P
a
8
1
L
O
2
na
3
tio
: R
-
1
Q
T
di
l
ti
A
d
A
R
+
-
1
u
0
77
K
V
M
R
C
: P
P
A
P
U
O
R
G
)
(G
4
4
: 01
8
9
ptors
cto
9
/C
1
D
D)
(9
O
d
2
u
00
n
: 2
1
0
0
0
RAM
o
em
4
S
S
ic
NO
23
:
2
O
H
1
T
)Q
(Q
Y
TC
H
A
G
3
B
)
2
: 1
P
(6
O
N
25
4
1
T
L
O
0
)
0
T
1
(1
1
:
O
N
D
O
OSRAM
R
P
)
(X
Packing
Sealing label
OHA02044
Dimensions of transportation box in mm (inch)
Breite / Width
Länge / length
200 5 (7,874 0,1968)
Höhe / height
30 5 (1,1811 0,1968)
200 5 (7,874 0,1968
)
2010-09-08
18
LR W5SN, LA W5SN, LY W5SN
Revision History: 2010-09-08
Previous Version: 2010-05-20
Page
all
Subjects (changes since last revision)
Date of change
2006-03-15
datasheet complemented with yellow
1, 13
10
OS-IN-2007-018 (Introduction of Jedec Level 2)
2007-08-16
Diagrams „Permissible Pulse Handling Capability“ added
ordering code (yellow) deleted
additional information
2008-02-21
2009-10-20
2009-12-07
2009-12-16
2009-12-16
2010-01-21
2010-03-23
2010-03-23
2010-05-20
2, 5
1, 11
all
data sheet reworked
1, 3, 4
all
OS-PCN-2009-034-A
data sheet reworked
7 - 11
13
diagrams updated
Package Outlines updated
ordering code (yellow) changed/added
2, 5
all
datasheet reworked / diagrams page 8 corrected / eye safety information 2010-09-08
page 19 updated
Wegen der Streichung der LED aus der IEC 60825-erfolgt die Bewertung der Augensicherheit nach dem Standard IEC
62471:2006 ("photobiological safety of lamps and lamp systems") / IEC 62471 (1st edition 2006-07).
Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LED die "moderate risk"- Grup-
pe (die die sich im "sichtbaren" Spektralbereich auf eine Expositionsdauer von 0,25 s bezieht). Unter realen Umständen
(für Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefähr-
dung aus.
Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres
Gefahrenpotenzial besitzen. Wie nach dem Blick in andere helle Lichtquellen (z.B. Autoscheinwerfer) auch, können tem-
porär eingeschränktes Sehvermögen und Nachbilder je nach Situation zu Irritationen, Belästigungen, Beeinträchtigungen
oder sogar Unfällen führen.
Due to the cancellation of the LED from IEC 60825 the evaluation of eye safety occurs according to the standard IEC
62471:2006 ("photobiological safety of lamps and lamp systems").
Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "lmoderate risk" group
(relating to devices in the visible spectrum with an exposure time of 0.25s). Under real circumstances (for exposure time,
eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of
principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their
blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity
and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the si-
tuation.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous
substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By
agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is
returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components7) page 20 may only be used in life-support devices or systems8) page 20 with the express written approval of OSRAM OS.
2010-09-08
19
LR W5SN, LA W5SN, LY W5SN
Fußnoten:
Remarks:
1.)
1)
Helligkeitswerte werden während eines Strompulses
Brightness values are measured during a current
pulse of typical 25 ms, with an internal reproducibility
of +/- 8 % and an expanded uncertainty of +/- 11 %
(acc. to GUM with a coverage factor of k = 3).
einer typischen Dauer von 25 ms, mit einer internen
Reproduzierbarkeit von +/- 8 % und einer erweiterten
Messunsicherheit von +/- 11 % gemessen (gemäß
GUM mit Erweiterungsfaktor k = 3).
2)
2)
Wegen der besonderen Prozessbedingungen bei der
Herstellung von LED können typische technische oder
abgeleitete Parameter nur aufgrund statistischer
Werte wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
oder abgeleiteten Werten unterscheiden können. Falls
Due to the special conditions of the manufacturing
processes of LED, the typical or calculated data of
technical parameters can only reflect statistical
figures. These do not necessarily correspond to the
actual parameters of each single product, which could
differ from the typical or calculated data of the typical
characeristic line. If requested, e.g. because of
technical improvements, these typ. data will be
changed without any further notice.
The dominant wavelength is measured at a current
pulse of typical 25 ms, with an internal reproducibility
of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm
(acc. to GUM with a coverage factor of k=3).
erforderlich,
z.B.
aufgrund
technischer
Verbesserungen, werden diese typischen Werte ohne
weitere Ankündigung geändert.
3)
3)
Die dominante Wellenlänge wird während eines
Strompulses einer typischen Dauer von 25 ms, mit
einer internen Reproduzierbarkeit von +/- 0,5 nm und
einer erweiterten Messunsicherheit von +/- 1 nm
gemessen (gemäß GUM mit Erweiterungsfaktor
k = 3).
4)
5)
4)
5)
Vorwärtsspannungen
werden
während
eines
The forward voltage is measured during a current
pulse of typical 8 ms, with an internal reproducibility of
+/- 0,05 V and an expanded uncertainty of +/- 0,1 V
(acc. to GUM with a coverage factor of k=3).
Strompulses einer typischen Dauer von 8 ms, mit
einer internen Reproduzierbarkeit von +/- 0,05 V und
einer erweiterten Messunsicherheit von +/- 0,1 V
gemessen (gemäß GUM mit Erweiterungsfaktor k=3).
Im gestrichelten Bereich der Kennlinien muss mit
In the range where the line of the graph is broken, you
must expect higher brightness differences between
single LEDs within one packing unit.
erhöhten
Helligkeitsunterschieden
zwischen
Leuchtdioden innerhalb einer Verpackungseinheit
gerechnet werden.
Dimming range for direct current mode max. 5:1
Dimmverhältnis im Gleichstrom-Betrieb max. 5:1.
Maße werden wie folgt angegeben: mm (inch)
Ein kritisches Bauteil ist ein Bauteil, das in
lebenserhaltenden Apparaten oder Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
6)
7)
6)
7)
Dimensions are specified as follows: mm (inch)
A
critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or
the effectiveness of that device or system.
einer
Fehlfunktion
dieses
lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
8)
8)
Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden,
dass die Gesundheit und das Leben des Patienten in
Gefahr ist.
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health
and the life of the user may be endangered.
Published by
OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com
© All Rights Reserved.
2010-09-08
20
相关型号:
©2020 ICPDF网 联系我们和版权申明