SPS-7380-C590G [OPTOWAY]

Transceiver,;
SPS-7380-C590G
型号: SPS-7380-C590G
厂家: OPTOWAY TECHNOLOGY INC    OPTOWAY TECHNOLOGY INC
描述:

Transceiver,

文件: 总5页 (文件大小:149K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
1
Optoway  
SPS-7380-CXX0G  
***********************************************************************************************************************************************************************  
SPS-7380-CXX0G / SPS-7380B-CXX0G  
(RoHS Compliant)  
3.3V / CWDM / 1.25 Gbps SFP LC SINGLE-MODE TRANSCEIVER  
**********************************************************************************************************************************************************************  
FEATURES  
DESCRIPTION  
l Hot-Pluggable SFP Footprint LC Optical Transceiver  
l Small Form-Factor Pluggable (SFP) MSA compatible  
l Compliant with IEEE 802.3z Gigabit Ethernet  
1000BASE-ZX  
The SPS-7380-CXX0G series single mode transceivers is  
small form factor pluggable module for bi-directional serial  
optical data communications such as Gigabit Ethernet  
1000BASE-ZX and Fibre Channel 1x SM-LC-L FC-PI. It is  
with the SFP 20-pin connector to allow hot plug capability.  
This module is designed for single mode fiber and operates  
at a nominal wavelength of CWDM wavelength. There are  
eighteen center wavelengths available from 1270 nm to  
1610 nm, with each step 20 nm. A guaranteed minimum  
optical link budget of 24 dB is offered The transmitter  
section uses a multiple quantum well CWDM DFB laser  
and is a class 1 laser compliant according to International  
Safety Standard IEC-60825. The receiver section uses an  
integrated InGaAs detector preamplifier (IDP) mounted in  
an optical header and a limiting post-amplifier IC.  
l Compliant with Fibre Channel 1X SM-LC-L FC-PI  
l 18 Wavelength (λ): 1270 nm to 1610 nm CWDM DFB  
LD Transmitter  
l 24 dB Power Budget at Least  
l AC/AC Coupling according to MSA  
l Single +3.3 V Power Supply  
l RoHS Compliant  
l 0 to 70oC Operation: SPS-7380-CXX0G  
l -5 to 85oC Operation: SPS-7380B-CXX0G  
l Class 1 Laser International Safety Standard IEC-60825  
Compliant  
LASER SAFETY  
This single mode transceiver is a Class 1 laser product. It  
complies with IEC-60825 and FDA 21 CFR 1040.10 and  
1040.11. The transceiver must be operated within the  
specified temperature and voltage limits. The optical ports  
of the module shall be terminated with an optical connector  
or with a dust plug.  
APPLICATIONS  
l Gigabit Ethernet Switches and Routers  
l Fibre Channel Switch Infrastructure  
l XDSL Applications  
l Metro Edge Switching  
ORDER INFORMATION  
P/No.  
Bit Rate  
(Gb/s)  
1000  
BASE  
Power  
Budget  
(dB)  
Wavelength Package  
(nm)  
Temp. TX Power RX Sens.  
RoHS  
(oC)  
(dBm)  
(dBm) Compliant  
SPS-7380-CXX0G  
SPS-7380B-CXX0G  
1.25  
1.25  
ZX  
ZX  
> 24  
> 24  
CWDM*  
CWDM*  
LC SFP  
LC SFP  
0 to 70  
-5 to 85  
5 to 0  
5 to 0  
-24  
-24  
Yes  
Yes  
CWDM* Wavelength (0 to 70oC)  
Central  
Wavelength  
Min.  
(nm)  
Typ.  
(nm)  
Max.  
(nm)  
Clasp Color  
Code  
Central  
Wavelength  
Min.  
(nm)  
Typ.  
(nm)  
Max.  
(nm)  
Clasp Color  
Code  
-C270  
-C290  
-C310  
-C330  
-C350  
-C370  
-C390  
-C410  
-C430  
1264.5  
1284.5  
1304.5  
1324.5  
1344.5  
1364.5  
1384.5  
1404.5  
1424.5  
1270  
1290  
1310  
1330  
1350  
1370  
1390  
1410  
1430  
1277.5  
1297.5  
1317.5  
1337.5  
1357.5  
1377.5  
1397.5  
1417.5  
1437.5  
Light Purple  
Sky Blue  
Yellow Green  
Yellow Ocher  
Pink  
-C450  
-C470  
-C490  
-C510  
-C530  
-C550  
-C570  
-C590  
-C610  
1444.5  
1464.5  
1484.5  
1504.5  
1524.5  
1544.5  
1564.5  
1584.5  
1604.5  
1450  
1470  
1490  
1510  
1530  
1550  
1570  
1590  
1610  
1457.5  
1477.5  
1497.5  
1517.5  
1537.5  
1557.5  
1577.5  
1597.5  
1617.5  
Yellow Orange  
Gray  
Violet  
Blue  
Green  
Yellow  
Orange  
Red  
Beige  
White  
Silver  
Black  
Brown  
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
1/1/2008 V3.0  
2
Optoway  
SPS-7380-CXX0G  
***********************************************************************************************************************************************************************  
Absolute Maximum Ratings  
Parameter  
Symbol  
Tstg  
Min  
Max  
Units  
oC  
Notes  
Storage Temperature  
-40  
0
-5  
85  
70  
85  
3.6  
Operating Case Temperature  
Topr  
oC  
SPS-7380-CXX0G  
SPS-7380B-CXX0G  
Power Supply Voltage  
Vcc  
-0.5  
V
Recommended Operating Conditions  
Parameter  
Power Supply Voltage  
Operating Case Temperature  
Symbol  
Min  
3.1  
0
Typ  
Max  
3.5  
70  
Units / Notes  
Vcc  
Topr  
3.3  
V
oC / SPS-7380-CXX0G  
oC / SPS-7380B-CXX0G  
mA  
-5  
85  
Power Supply Current  
Data Rate  
ICC (TX+RX)  
200  
300  
100  
1250  
Mb/s  
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Optical Transmit Power  
Output Center Wavelength  
Output Spectrum Width  
Side Mode Suppression Ratio  
Extinction Ratio  
Po  
0
---  
l c  
5
dBm  
nm  
nm  
dB  
dB  
ps  
1
2
l c 5.5  
l c +7.5  
l
Dl  
SMSR  
ER  
---  
30  
9
---  
1
-20 dB Width  
---  
---  
260  
260  
-120  
Optical Rise Time  
tr  
20 % to 80% Values  
20 % to 80% Values  
Optical Fall Time  
tf  
ps  
Relative Intensity Noise  
Electrical  
RIN  
dB/Hz  
Data Input Current Low  
Data Input Current High  
Differential Input Voltage  
TX Disable Input Voltage Low  
TX Disable Input Voltage High  
TX Disable Assert Time  
TX Disable Deassert Time  
TX Fault Output Voltage -- Low  
TX Fault Output Voltage -- High  
IIL  
IIH  
VIH - VIL  
TDIS, L  
TDIS, H  
TASSERT  
TDEASSERT  
TFaultL  
-350  
mA  
mA  
V
350  
2.4  
0.5  
Vcc  
10  
0.5  
0
2.0  
Peak-to-Peak  
V
V
3
3
ms  
ms  
1
0
0.5  
V
V
4
4
TFaultH  
2.0  
Vcc+0.3  
1. Output power is power coupled into a 9/125 mm single mode fiber.  
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.  
3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.  
4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).  
Receiver Specifications (0oC < Topr <70oC, 3.1V < Vcc < 3.5V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Sensitivity  
Sens  
Pin  
Pa  
-24  
dBm  
dBm  
dBm  
dBm  
dB  
4
Maximum Input Power  
Signal Detect -- Asserted  
Signal Detect -- Deasserted  
Signal detect -- Hysteresis  
Wavelength of Operation  
Electrical  
-3  
---  
4
-24  
---  
Transition: low to high  
Transition: high to low  
Pd  
-36  
1.0  
---  
---  
---  
1100  
1620  
2.0  
nm  
Differential Output Voltage  
V
OH VOL  
0.6  
V
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
1/1/2008 V3.0  
3
Optoway  
SPS-7380-CXX0G  
***********************************************************************************************************************************************************************  
Output LOS Voltage -- Low  
Output LOS Voltage -- High  
VOL  
VOH  
0
2.0  
0.5  
Vcc+0.3  
V
V
5
5
4. Measured at 27-1 PRBS at BER 1E-12.  
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).  
CONNECTION DIAGRAM  
PIN  
1
Signal Name  
TX GND  
Description  
Transmitter Ground  
Transmitter Fault Indication  
PIN  
11 RX GND  
12 RX DATA OUT- Inverse Receiver Data Out  
Signal Name  
Description  
Receiver Ground  
2
TX Fault  
3
TX Disable  
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out  
on high or open)  
4
5
6
MOD-DFE2  
MOD-DEF1  
MOD-DEF0  
Modulation Definition 2 Two wires 14 RX GND  
serial ID Interface  
Receiver Ground  
Modulation Definition 1 Two wires 15 Vcc RX  
serial ID Interface  
Receiver Power 3.3V±5%  
Transmitter Power 3.3V±5%  
Modulation Definition 0 Ground in 16 Vcc TX  
Module  
7
8
9
N/C  
Not Connected  
Loss of Signal  
17 TX GND  
Transmitter Ground  
Transmitter Data In  
LOS  
18 TX DATA IN+  
19 TX DATA IN-  
20 TX GND  
RX GND  
Receiver Ground  
Receiver Ground  
Inverse Transmitter Data In  
Transmitter Ground  
10 RX GND  
Module Definition  
Module Definition  
MOD-DEF2  
PIN 4  
MOD-DEF1  
MOD-DEF0  
Interpretation by Host  
PIN 5  
PIN 6  
4
SDA  
SCL  
LV-TTL Low  
Serial module definition  
protocol  
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector  
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the  
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
1/1/2008 V3.0  
4
Optoway  
SPS-7380-CXX0G  
***********************************************************************************************************************************************************************  
RECOMMENDED CIRCUIT SCHEMATIC  
(1,17,20)  
VeeT  
3
Tx_DISABLE  
Tx_FAULT  
Tx_DISABLE  
Tx_FAULT  
2
4.7K to 10KΩ  
TD +  
TD -  
18  
19  
16  
TD +  
TD -  
LD  
Z=50Ω  
Z=50Ω  
100Ω  
Driver  
1μH  
Vcc 3.3V  
VccT  
10μF  
10nF  
10μF  
10nF  
10nF  
1μH  
SerDes  
IC  
Protocol  
IC  
15  
12  
13  
8
VccR  
RD -  
10μF  
RD -  
Z=50Ω  
Z=50Ω  
100Ω  
POST  
Amp  
RD +  
RD +  
depending on SERDES  
4.7K to 10KΩ  
LOS  
LOSS OF SINGAL  
(9,10,11,14)  
6
VeeR  
MODULE DETECT  
MOD_DEF(0)  
MOD_DEF(1)  
MOD_DEF(2)  
5
4
SCL  
SDA  
EEPROM  
4.7K to 10KΩ  
4.7K to 10KΩ  
SFP module  
Vcc 3.3V  
4.7K to 10KΩ  
PACKAGE DIAGRAM  
Units in mm  
Note: Specifications subject to change without notice.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
1/1/2008 V3.0  
5
Optoway  
SPS-7380-CXX0G  
***********************************************************************************************************************************************************************  
Revision History  
Version  
Subject  
Release Date  
1.0  
2.0  
3.0  
Initial datasheet  
2004/1/1  
2005/12/1  
2008/1/1  
Add 1270 to 1450 nm CWDM.  
1. Revise package diagram for high port density use  
2. Add clasp color codes for 18 wavelengths  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
1/1/2008 V3.0  

相关型号:

UL1042

UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowego

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV201

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14

IC-SM-VIDEO AMP

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14TA

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14TC

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV302N16

IC-SM-4:1 MUX SWITCH

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV4089

VIDEO AMPLIFIER WITH DC RESTORATION

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX