SPB-97120R-1590G_2015 [OPTOWAY]
3.2 Gb/s Single-Fiber SFP Transceiver;
| 型号： | SPB-97120R-1590G_2015 |
| 厂家： | 
OPTOWAY TECHNOLOGY INC |
| 描述： | 3.2 Gb/s Single-Fiber SFP Transceiver |
| 文件： | 总5页 (文件大小：184K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1
Optoway
SPB-97120R-1590G
***********************************************************************************************************************************************************************
SPB-97120R-1590G
(SC)
(LC)
(RoHS Compliant)
SPB-97120RL-1590G
1590 nm TX / 1510 nm RX , 3.3V / 3.2 Gb/s Single-Fiber SFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
The SPB-97120R-1590G series is high performance module
for 10GBASE LX-4, Serial ATA/ATA2, SONET OC-48 /
SDH STM-16, Gigabit Ethernet 1000BASE-LX and 1x/2x
Fibre Channel single fiber communications by using 1590
nm transmitter and 1510 nm receiver. It is with the SFP
20-pin connector to allow hot plug capability. The
transmitter section uses a multiple quantum well 1590 nm
DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC 60825. The receiver
section is designed to receive 1510 nm signal. The receiver
section uses an integrated 1510 nm detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC.
l Multirate up to 3.2 Gb/s
l 1-Fiber Bi-Directional SFP Optical Transceiver
l Simplex SC Connector: SPB-97120R-1590G
l Simplex LC Connector: SPB-97120RL-1590G
l 1590 nm DFB LD Transmitter
l 1510 nm Receiver
l Distance Up to 120 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70oC Operation
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
l 10GBASE LX-4
l Serial ATA / ATA2
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
Distance
(km)
TX
(nm)
RX
(nm)
Package
Temp
(oC)
TX
Power
(dBm)
RX Sens.
(dBm) Compliant
RoHS
SPB-97120R-1590G
SPB-97120RL-1590G
Multirate*
Multirate*
120
120
1590DFB
1590DFB
1510
1510
0 to 70
0 to 70
4 to 0
4 to 0
-28
-28
Yes
Yes
SC SFP
LC SFP
Multirate*: 3.185Gb/s, 3.125Gb/s, 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Relative Humidity
Symbol
Tstg
Topr
RH
Min
-40
0
Max
85
Units
oC
oC
%
Notes
70
0
85
Non condensing
Power Supply Voltage
Input Voltage
Vcc
0
3.6
Vcc
V
---
GND
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Power Supply Current
Operating Case Temperature
Data Rate
Symbol
Min
Typ
3.3
Max
3.47
300
70
Units / Notes
Vcc
3.13
V
mA
oC
ICC (TX+RX)
Topr
200
0
125
3125
3200
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0
2
Optoway
SPB-97120R-1590G
***********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Po
l
0
4
1620
1
dBm
nm
nm
dB
1
1580
σl
-20 dB width
Side Mode Suppression Ratio
Extinction Ratio
SMSR
ER
30
6.0
dB
Output Eye
Compliant with IEEE 802.3-2008 10GBASE-LX4
Optical Rise Time
Optical Fall Time
tr
tf
120
120
ps
ps
20 % to 80% Values
20 % to 80% Values
Relative Intensity Noise
RIN
-120
dB/Hz
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
TX Disable Input Voltage – Low
TX Disable Input Voltage – High
TX Disable Assert Time
IIL
IIH
-350
mA
mA
V
350
2.4
VIH - VIL
TDIS, L
0.5
0
Peak-to-Peak
0.5
V
2
2
TDIS, H
TASSERT
TDEASSERT
TFaultL
2.0
Vcc
10
V
ms
ms
V
TX Disable Deassert Time
TX Fault Output Voltage -- Low
TX Fault Output Voltage -- High
1
0
0.5
3
3
TFaultH
2.0
Vcc+0.3
V
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
Pin
Pa
---
-9
---
---
---
---
---
-28
---
dBm
dBm
dBm
dBm
dB
4
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
---
-28
---
Transition: low to high
Transition: high to low
Pd
-40
1.0
1480
1520
nm
5
Differential Output Voltage
Output LOS Voltage -- Low
Output LOS Voltage – High
Signal Detect Assert Time
Signal Detect Deassert Time
V
OH – VOL
VOL
0.6
0
2.0
0.5
V
V
6
VOH
2.0
Vcc+0.3
100
V
6
ASMAX
ms
ms
OFF to ON
ON to OFF
ANSMAX
300
Notes: 4. Minimum sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS.
5. At least 30 dB optical isolation for the wavelength 1580 to 1620 nm.
6. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0
3
Optoway
SPB-97120R-1590G
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
Signal Name
TX GND
Description
Transmitter Ground
Transmitter Fault Indication
PIN
11 RX GND
12 RX DATA OUT- Inverse Receiver Data Out
Signal Name
Description
Receiver Ground
2
TX Fault
3
TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
on high or open)
4
5
6
MOD-DFE2
MOD-DEF1
MOD-DEF0
Modulation Definition 2 – Two wires 14 RX GND
serial ID Interface
Receiver Ground
Modulation Definition 1 – Two wires 15 Vcc RX
serial ID Interface
Receiver Power – 3.3V±5%
Transmitter Power – 3.3V±5%
Modulation Definition 0 – Ground in 16 Vcc TX
Module
7
8
9
N/C
Not Connected
Loss of Signal
17 TX GND
Transmitter Ground
Transmitter Data In
LOS
18 TX DATA IN+
19 TX DATA IN-
20 TX GND
RX GND
Receiver Ground
Receiver Ground
Inverse Transmitter Data In
Transmitter Ground
10 RX GND
MODULE DEFINITION
Module Definition
MOD-DEF2
PIN 4
MOD-DEF1
MOD-DEF0
Interpretation by Host
PIN 5
PIN 6
4
SDA
SCL
LV-TTL Low
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0
4
Optoway
SPB-97120R-1590G
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
(1,17,20)
VeeT
3
Tx_DISABLE
Tx_FAULT
Tx_DISABLE
Tx_FAULT
2
4.7K to 10KΩ
TD +
TD -
18
19
16
TD +
TD -
LD
Z=50Ω
Z=50Ω
100Ω
Driver
1μH
Vcc 3.3V
VccT
10μF
10nF
10μF
10nF
10nF
1μH
SerDes
IC
Protocol
IC
15
12
13
8
VccR
RD -
10μF
RD -
Z=50Ω
Z=50Ω
100Ω
POST
Amp
RD +
RD +
depending on SERDES
4.7K to 10KΩ
LOS
LOSS OF SINGAL
(9,10,11,14)
6
VeeR
MODULE DETECT
MOD_DEF(0)
MOD_DEF(1)
MOD_DEF(2)
5
4
SCL
SDA
EEPROM
4.7K to 10KΩ
4.7K to 10KΩ
SFP module
Vcc 3.3V
4.7K to 10KΩ
PACKAGE DIAGRAM
Units in mm
A) SC SFP
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0
5
Optoway
SPB-97120R-1590G
***********************************************************************************************************************************************************************
B) LC SFP
Note: Specifications subject to change without notice.
REVISION HISTORY
Version
Subject
Release Date
1.0
2.0
Initial datasheet
Update transmitter eye mask definition and rise/fall time
2008/1/1
2009/1/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V2.0
相关型号：
SPB-97120RL-1510G
1510 nm TX / 1590 nm RX , 3.3V / 3.2 Gb/s Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RL-1590G
1590 nm TX / 1510 nm RX , 3.3V / 3.2 Gb/s Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RLW-1510G
1510 nm TX / 1590 nm RX , 3.3V / 3.2 Gb/s Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RLW-1590G
1590 nm TX / 1510 nm RX , 3.3V / 3.2 Gb/s Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RW-1510G
1510 nm TX / 1590 nm RX , 3.3V / 3.2 Gb/s Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RW-1510G_15
3.2 Gb/s Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RW-1510G_2015
3.2 Gb/s Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RW-1590G
1590 nm TX / 1510 nm RX , 3.3V / 3.2 Gb/s Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RW-1590G_15
3.2 Gb/s Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120RW-1590G_2015
3.2 Gb/s Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120W-1510G
1510 nm TX / 1590 nm RX , 3.3V / 2.5 Gbps Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
SPB-97120W-1510G_15
2.5 Gbps Digital Diagnostic Single-Fiber SFP TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
OPTOWAY
©2020 ICPDF网 联系我们和版权申明