BTRS-7610ACG

更新时间:2024-09-18 06:22:17
品牌:OPTOWAY
描述:1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver

BTRS-7610ACG 概述

1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 1310毫微米TX / 1550纳米RX , 3.3V / 1250 Mbps的符合RoHS单光纤收发器 光纤收发器

BTRS-7610ACG 规格参数

是否Rohs认证: 符合生命周期:Contact Manufacturer
Reach Compliance Code:compliant风险等级:5.75
光纤设备类型:TRANSCEIVER安装特点:THROUGH HOLE MOUNT
最高工作温度:85 °C最低工作温度:-20 °C
标称工作波长:1550 nm子类别:Fiber Optic Transceivers
最大供电电压:3.47 V表面贴装:NO
Base Number Matches:1

BTRS-7610ACG 数据手册

通过下载BTRS-7610ACG数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
1
Optoway  
BTRS-7610CG  
***********************************************************************************************************************************************************************  
BTRS-7610CG / BTRS-7610ACG  
1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver  
***********************************************************************************************************************************************************************  
FEATURES  
DESCRIPTION  
l Single Fiber Bi-Directional SFF Transceiver  
l 1310 nm Transmitter  
The BTRS-7610CG series is high performance module for  
single fiber communications by using 1310 nm transmitter  
and 1550 nm receiver. The transmitter section uses a  
multiple quantum well laser and is a class 1 laser compliant  
according to International Safety Standard IEC-60825. The  
receiver section uses an integrated 1550 nm detector  
preamplifier (IDP) mounted in an optical header and a  
limiting post-amplifier IC. A PECL logic interface  
simplifies interface to external circuitry. LV-TTL Signal  
Detect is used.  
l 1550 nm Receiver  
l Distance Up to 10 km  
l Single +3.3 V Power Supply  
l RoHS Compliant  
l 0 to 70oC Operating: BRS-7610CG  
l -20 to 85oC Operating: BRS-7610ACG  
l Speed up to 1300 Mbps  
l LVTTL Signal Detect Output  
l PECL Differential Inputs and Outputs  
l Wave Solderable and Aqueous Washable  
l Class 1 Laser International Safety Standard IEC-60825  
Compliant  
LASER SAFETY  
This single mode transceiver is a Class 1 laser product. It  
complies with IEC-60825 and FDA 21 CFR 1040.10 and  
1040.11. The transceiver must be operated within the  
specified temperature and voltage limits. The optical ports  
of the module shall be terminated with an optical connector  
or with a dust plug.  
APPLICATIONS  
l WDM Gigabit Ethernet Links  
l SONET/SDH Equipment Interconnect  
l Fiber Channel Links  
ORDER INFORMATION  
P/No.  
Bit Rate  
(Gb/s)  
Distance  
(km)  
TX  
(nm)  
RX  
(nm)  
Voltage Package  
(V)  
Temp  
(oC)  
TX  
RX Sens. RoHS  
(dBm) Compliant  
Power  
(dBm)  
-3 to -9  
BTRS-7610CG  
1.25  
1.25  
10  
10  
1310  
1310  
1550  
1550  
3.3  
3.3  
SC, 2X5  
0 to 70  
-20  
-20  
Yes  
Yes  
BTRS-7610ACG  
SC, 2X5 -20 to 85 -3 to -9  
Note: 1. BTRS-XXXXXG is SFF SC receptacle type package.  
2. BTRS-XXXXX-APBBBG is SFF pigtail type package with different connector, A=S is SC connector, A=F is FC  
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.  
Absolute Maximum Ratings  
Parameter  
Storage Temperature  
Operating Temperature  
Symbol  
Tstg  
Min  
-40  
0
Max  
85  
Units  
oC  
oC  
Notes  
Topr  
70  
BTRS-7610CG  
-20  
85  
BTRS-7610ACG/air flow 1m/sec  
10 seconds on leads only  
Soldering Temperature  
Power Supply Voltage  
Input Voltage  
---  
Vcc  
---  
260  
3.6  
Vcc  
oC  
V
0
GND  
V
Output Current  
Iout  
0
30  
mA  
Recommended Operating Conditions  
Parameter  
Power Supply Voltage  
Operating Temperature  
Symbol  
Min  
3.13  
0
Typ  
Max  
3.47  
70  
85  
1300  
260  
Units / Notes  
Vcc  
3.3  
V
oC / BTRS-7610CG  
oC / BTRS-7610ACG  
Mb/s  
Topr  
-20  
Data Rate  
1250  
Power Supply Current  
Icc  
mA  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V2.0  
2
Optoway  
BTRS-7610CG  
**********************************************************************************************************************************************************************  
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Optical Transmit Power  
Output Center Wavelength  
Output Spectrum Width  
Extinction Ratio  
Po  
l
σl  
ER  
-9  
-3  
dBm  
nm  
nm  
1
1285  
1310  
1350  
2.0  
RMS (σ)  
9
dB  
Output Eye  
Compliant with IEEE 802.3z  
Optical Rise Time  
tr  
tf  
0.26  
0.26  
ns  
ns  
20% to 80% Values  
20% to 80% Values  
Optical Fall Time  
Relative Intensity Noise  
Total Jitter  
RIN  
TJ  
-120  
0.227  
dB/Hz  
ns  
2
Electrical  
Data Input Current Low  
Data Input Current High  
Differential Input Voltage  
Data Input Voltage Low  
Data Input Voltage -- High  
Disable Input Voltage -- Low  
Disable Input Voltage -- High  
Shut Off Time for TxDis  
IIL  
-350  
mA  
mA  
mV  
V
IIH  
350  
1600  
-1.58  
-0.74  
0.8  
VIH - VIL  
VIL - VCC  
VIH - VCC  
VTDIS,L  
VTDIS,H  
tDIS  
300  
-2.0  
3
3
-1.1  
V
0
V
TX Output Enabled  
TX Ouput Disabled  
Vcc 1.3  
Vcc  
1
V
ms  
Notes: 1. Output power is power coupled into a 9/125 mm single mode fiber.  
2. Measured with a 27-1 PRBS.  
3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.  
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3. 47V)  
Parameter  
Symbol  
Min  
Typ  
Max  
Units  
Notes  
Optical  
Sensitivity  
---  
Pin  
Pa  
---  
-3  
---  
---  
---  
---  
---  
---  
-20  
---  
-20  
---  
dBm  
dBm  
dBm  
dBm  
dB  
1
Maximum Input Power  
Signal Detect -- Asserted  
Signal Detect -- Deasserted  
Signal detect -- Hysteresis  
Wavelength of Operation  
Optical Return Loss  
Transition: low to high  
Transition: high to low  
Pd  
-31  
1.0  
1480  
20  
1580  
nm  
2
ORL  
dB  
Electrical  
Data Output Voltage Swing  
SD Output Voltage -- Low  
SD Output Voltage -- High  
Signal Detect Assert Time  
Signal Detect Deassert Time  
V
OH VOL  
VOL  
0.575  
0
0.930  
0.8  
V
V
VOH  
2.0  
Vcc+0.3  
100  
V
ASMAX  
ms  
ms  
OFF to ON  
ON to OFF  
ANSMAX  
300  
Notes: 1. Minimum sensitivity and saturation levels at BER 1E-12 for a 27-1 PRBS.  
2. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V2.0  
3
Optoway  
BTRS-7610CG  
**********************************************************************************************************************************************************************  
CONNECTION DIAGRAM  
PIN  
1
Symbol  
VEE  
Notes  
r
Directly connect this pin to the receiver ground plane  
+3.3V dc power for the receiver section  
2
VCC  
SD  
r
3
4
Active high on this indicates a received optical signal.  
Receiver Dataout Bar. See recommended circuit schematic  
Receiver Dataout. See recommended circuit schematic  
+3.3V dc power for the transmitter section  
RD-  
5
6
RD+  
VCC  
t
7
VEE  
t
Directly connect this plan to the transmitter ground plane  
Transmitter Disable. Connect this pin to +3.3V TTL logic 1to disable module  
To enable module connect to TTL logic low 0”  
8
TxDis  
9
TD+  
TD-  
MS  
Transmitter Data In. See recommended circuit schematic  
Transmitter Data In Bar. See recommended circuit schematic  
Mounting Studs. Connect to Chassis Ground  
10  
MS  
RECOMMENDED CIRCUIT SCHEMATIC  
Vcc3.3V  
depend on customer's PHY  
terminate and bias inside Transceiver module  
TD-  
Z=50R  
Z=5OR  
LVPECL  
TD+  
130R  
130R  
TXDis(LVTTL)  
Vcc3.3V  
1uH  
10nF  
10nF 10uF  
10uF  
PHY DEVICE  
1uH  
BTRS-7XXXC  
Vcc3.3V  
10nF  
10uF  
RD+  
RD-  
100R  
LVPECL  
Z=50R  
Z=5OR  
depend on customer's PHY  
SD  
TO LVTTL STAGE  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V2.0  
4
Optoway  
BTRS-7610CG  
**********************************************************************************************************************************************************************  
PACKAGE DIAGRAM  
Units in mm  
1) SC Receptacle  
A) Standard Case  
BTRS-7610CG / BTRS-7610ACG  
B) Extended Case  
BTRS-7610CEG / BTRS-7610ACEG  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V2.0  
5
Optoway  
BTRS-7610CG  
**********************************************************************************************************************************************************************  
2) Pigtail  
BTRS-7610C-SP50G / BTRS-7610AC-SP50G  
Note: Length L is 50± 3 cm. Other pigtails length is available upon request.  
Note: Specifications subject to change without notice.  
***********************************************************************************************************************************************************************  
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303  
Tel: 886-3-5979798  
Fax: 886-3-5979737  
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw  
10/1/2005 V2.0  

BTRS-7610ACG 相关器件

型号 制造商 描述 价格 文档
BTRS-7610C-SPG OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7610CG OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7610CG_09 OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7620AC-SPG OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7620ACG OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7620C-SPG OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7620CG OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7620CG_09 OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7640AC-SPG OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格
BTRS-7640ACG OPTOWAY 1310 nm TX / 1550 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver 获取价格

BTRS-7610ACG 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6