RS1KFP [ONSEMI]
表面贴装快速恢复整流器;型号: | RS1KFP |
厂家: | ONSEMI |
描述: | 表面贴装快速恢复整流器 |
文件: | 总6页 (文件大小:338K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
January 2016
RS1JFP - RS1MFP
Surface Mount Fast Recovery Rectifiers
Features
• Low Power Loss, High Efficiency
SOD-123HE
2
2
• Larger Cathode Pad for Improved Power Dissipation
• Ultra Thin Profile - Package Height <1.0 mm
1
• High Surge Capacity
1
• Low Forward Voltage: 1.3 V Maximum
Band Indicates Cathode
• UL Flammability 94V-0 Classification
• MSL 1 per J-STD-020
1
2
Cathode
Anode
• RoHS Compliant / Green Molding Compound
• Industrial Device Qualified per AEC-Q101 Standards
* See authorized use policy
Ordering Information
Part Number
RS1JFP
Top Mark
JLS
Package
SOD-123HE
SOD-123HE
SOD-123HE
Packing Method
Tape and Reel
Tape and Reel
Tape and Reel
RS1KFP
KLS
RS1MFP
MLS
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Value
Symbol
Parameter
Unit
RS1JFP
600
RS1KFP
800
RS1MFP
1000
VRRM
VRMS
VR
Repetitive Peak Reverse Voltage
RMS Reverse Voltage
V
V
V
A
420
560
700
DC Blocking Voltage
600
800
1000
IF(AV)
Average Forward Rectified Current
1.2
Peak Forward Surge Current: 8.3 ms Single
Half Sine-Wave Superimposed on Rated Load
IFSM
50
A
TJ
Operating Junction Temperature Range
Storage Temperature Range
-55 to +150
-55 to +150
°C
°C
TSTG
© 2015 Fairchild Semiconductor Corporation
RS1JFP - RS1MFP Rev. 1.1
www.fairchildsemi.com
Thermal Characteristics(1)
Values are at TA = 25°C unless otherwise noted.
Symbol
ψJL
Parameter
Value
12
Unit
°C/W
°C/W
Typical Thermal Characteristics, Junction-to-Lead(2)
RθJA
Typical Thermal Resistance, Junction-to-Ambient
140
Notes:
1. Per JESD51-3 recommended thermal test board. Device mounted on FR-4 PCB, board size = 76.2 mm x 114.3 mm.
2. Thermocouple soldered at cathode lead.
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Instantaneous Forward Voltage(3)
Conditions
IF = 1.2 A
Min.
Typ.
Max.
1.3
5
Unit
VF
V
TJ = 25°C
IR
Reverse Current at Rated VR
μA
TJ = 125°C
150
CJ
Trr
Junction Capacitance
VR = 0 V, f = 1 MHz
18
pF
ns
IF = 0.5 A, IR = 1 A,
Irr = 0.25 A
Reverse Recovery Time
300
Note:
3. Pulse test with PW = 300 μs, 1% duty cycle
© 2015 Fairchild Semiconductor Corporation
RS1JFP - RS1MFP Rev. 1.1
www.fairchildsemi.com
2
Typical Performance Characteristics
ꢆꢀꢀ
ꢆꢀ
ꢆꢁꢃ
ꢆꢁꢂ
ꢆ
TJ=125oC
ꢀꢁꢅ
ꢀꢁꢄ
ꢆ
ꢀꢁꢃ
ꢀꢁꢆ
ꢀꢁꢀꢆ
RESISTIVE OR
INDUCTIVE LOAD
ꢀꢁꢂ
TJ=25oC
ꢆꢀꢀ
ꢀ
ꢀ
ꢂꢀ
ꢃꢀ
ꢄꢀ
ꢅꢀ
ꢆꢂꢀ
ꢆꢃꢀ
ꢀ
ꢂꢇ
ꢇꢀ
ꢈꢇ
ꢆꢀꢀ
ꢆꢂꢇ
ꢆꢇꢀ
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
CASE TEMPERATURE (oC)
Figure 2. Typical Reverse Characteristics
Figure 1. Maximum Forward Current
Derating Voltage
ꢆꢀ
ꢆꢀꢀ
ꢆꢀ
ꢆ
ꢆ
8.3ms Single
Half Sine Wave.
ꢀꢁꢆ
ꢀꢁꢃ
ꢀꢁꢄ
ꢀꢁꢅ
ꢆ
ꢆꢁꢂ
ꢆꢁꢃ
ꢆꢁꢄ
ꢆꢁꢅ
ꢂ
ꢆ
ꢆꢀ
ꢆꢀꢀ
FORWARD VOLTAGE (V)
NUMBER OF CYCLES AT 60 Hz
Figure 4. Typical Instantaneous
Forward Characteristics
Figure 3. Maximum Non-Repetitive
Forward Surge Current
ꢆꢀꢀ
f=1.0MHz
Vsig=50mVp-p
ꢆꢀ
ꢆ
ꢀꢁꢆ
ꢆ
ꢆꢀ
ꢆꢀꢀ
REVERSE VOLTAGE (V)
Figure 5. Typical Junction Capacitance
Figure 6. Reverse Recovery Time Characteristic and
Test Circuit Diagram
© 2015 Fairchild Semiconductor Corporation
RS1JFP - RS1MFP Rev. 1.1
www.fairchildsemi.com
3
3.00
2.60
0.55
1.95
1.65
1.15
0.85
1.40
2.30
1.25
LAND PATTERN RECOMMENDATION
0.30
0.10
1.00
0.75
3.90
3.50
2.05
1.65
2.05
1.65
NOTES:
A. NO INDUSTRY STANDARD APPLIES TO THIS
PACKAGE.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
D. DRAWING FILE NAME: MKT-MA02Crev2
1.25
0.85
0.40
0.25
2.30
1.90
1.20
0.55
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号:
RS1KG
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts
DCCOM
RS1KHE3_A/H
Rectifier Diode, 1 Element, 1A, 800V V(RRM), Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
RS1KHE3_A/I
Rectifier Diode, 1 Element, 1A, 800V V(RRM), Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
RS1KL
Surface Mount Fast Recover Rectifier Reverse Voltage 50 to 1000 V Forward Current 1.0 A
DACHANG
©2020 ICPDF网 联系我们和版权申明