QRD1113 [ONSEMI]
反射物体传感器;
ONSEMI 
Reflective Object Sensor
QRD1113, QRD1114
Description
The QRD1113 and QRD1114 reflective sensors consist of an
infrared emitting diode and an NPN silicon phototransistor mounted
side by side in a black plastic housing. The on−axis radiation of the
emitter and the on−axis response of the detector are both perpendicular
to the face of the QRD1113 and QRD1114. The phototransistor
responds to radiation emitted from the diode only when a reflective
object or surface is in the field of view of the detector.
www.onsemi.com
Features
• Phototransistor Output
• No−Contact Surface Sensing
• Unfocused for Sensing Diffused Surfaces
• Compact Package
• Daylight Filter on Sensor
• This Device is Pb−Free and RoHS Compliant
REFLECTIVE RECTANGULAR SENSOR
CASE 100BY
PIN ASSIGNMENT
Emitter
2
Anode
3
1
4
Collector
Cathode
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2005
1
Publication Order Number:
October, 2019 − Rev. 3
QRD1114/D
QRD1113, QRD1114
ABSOLUTE MAXIMUM RATINGS
(Values are at T = 25°C unless otherwise specified)
A
Symbol
Parameter
Min.
Unit
°C
T
Operating Temperature
Storage Temperature
−40 to +85
−40 to +100
240 for 5 s
260 for 10 s
OPR
T
STG
T
SOL−I
Lead Temperature (Solder Iron) (Notes 1, 2, 3)
Lead Temperature (Solder Flow) (Notes 1, 2)
T
SOL−F
EMITTER
I
Continuous Forward Current
Reverse Voltage
50
5
mA
V
F
V
P
R
D
Power Dissipation
100
mW
SENSOR
V
V
Collector−Emitter Voltage
Emitter−Collector Voltage
Power Dissipation (Note 4)
30
5
V
V
CEO
ECO
P
100
mW
D
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. RMA flux is recommended.
2. Methanol or isopropyl alcohols are recommended as cleaning agents.
3. Soldering iron tip 1/16 inch (1.6 mm) minimum from housing.
4. Derate power dissipation linearly 1.33 mW/°C.
ELECTRICAL/OPTICAL CHARACTERISTICS (Values are at T = 25°C unless otherwise specified)
A
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
INPUT (EMITTER)
V
I
Forward Voltage
I = 20 mA
F
1.7
V
F
Reverse Leakage Current
Peak Emission Wavelength
V = 5 V
R
100
mA
nm
R
λ
PE
I = 20 mA
F
940
OUTPUT (SENSOR)
Collector−Emitter Breakdown
I
= 1 mA
30
5
V
V
BV
BV
I
C
CEO
ECO
D
Emitter−Collector Breakdown
I = 0.1 mA
E
Dark Current
V
= 10 V, I = 0 mA
nA
100
CE
F
COUPLED
I = 20 mA, V = 5 V, D = 0.050 inch
I
QRD1113 Collector Current
QRD1114 Collector Current
0.300
1
mA
mA
F
CE
C(ON)
(Notes 5, 7)
I
C(ON)
V
Collector Emitter Saturation
Voltage
I = 40 mA, I = 100 mA, D = 0.050 inch
CE(SAT)
F
C
V
0.4
(Notes 5, 7)
I
Cross Talk
Rise Time
Fall time
I = 20 mA, V = 5 V, E = 0 (Note 6)
0.2
10
50
10.0
mA
ms
ms
CX
F
CE
E
V
CE
= 5 V, R = 100 W, I
= 5 mA
t
r
L
C(ON)
t
f
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
5. D is the distance from the sensor face to the reflective surface.
6. Crosstalk (I ) is the collector current measured with the indicated current on the input diode and with no reflective surface.
CX
7. Measured using Eastman Kodak natural white test card with 90% diffused reflecting as a reflecting surface.
ORDERING INFORMATION
Part Number
Operating Temperature
Package
Top Mark
Packing Method
Reflective Rectangular
Sensor PCB Mount
Bulk
QRD1113
QRD1114
−40 to +85°C
−40 to +85°C
QRD1113
QRD1114
www.onsemi.com
2
QRD1113, QRD1114
TYPICAL PERFORMANCE CHARACTERISTICS
Figure 1. Forward Voltage vs. Forward Current
Figure 2. Normalized Collector Current vs.
Forward Current
Figure 3. Normalized Collector Current vs.
Temperature
Figure 4. Normalized Collector Dark Current vs.
Temperature
www.onsemi.com
3
QRD1113, QRD1114
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
Figure 5. Normalized Collector Current vs. Distance
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
REFLECTIVE RECTANGULAR SENSOR PCB MOUNT
CASE 100BY
ISSUE O
DATE 30 SEP 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13408G
REFLECTIVE RECTANGULAR SENSOR PCB MOUNT
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号：
QRD1210T30
Powerex Fast Recovery Diode Modules are designed for use in applications requiring fast switching
POWEREX
©2020 ICPDF网 联系我们和版权申明