NRVUS1MFA [ONSEMI]
超快速表面贴装整流器;DATA SHEET
www.onsemi.com
Super Fast Surface Mount
Rectifiers
2
US1AFA-US1MFA
1
SOD−123FL
CASE 425AB
Features
• Glass Passivated Chip Junction
• Low Power Loss, High Efficiency
• Fast Switching Reverse Recovery Time: 50~75 ns Maximum
• High Surge Capacity
• UL Flammability 94V−0 Classification
• MSL 1 per J−STD−020
1
2
Cathode
Anode
• NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
MARKING DIAGRAM
• These Devices are Pb−Free, Halogen Free and are RoHS Compliant
YYYY
ZXXXW
YYYY
Z
= Binary Calendar Year Code Scheme
= Assembly Plant Code
XXX
W
= Specific Device Code
= Single Digit Week Code
ORDERING INFORMATION
†
Part Number
Device Code Marking
Package
SOD−123FL
Shipping
US1AFA, NRVUS1AFA*
US1BFA, NRVUS1BFA*
US1DFA, NRVUS1DFA*
US1FFA, NRVUS1FFA*
US1GFA, NRVUS1GFA*
US1JFA, NRVUS1JFA*
US1KFA, NRVUS1KFA*
US1MFA, NRVUS1MFA*
HAL
HBL
HDL
HFL
HGL
HJL
3,000 / Tape & Reel
(Pb−Free / Halogen Free)
HKL
HML
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable
© Semiconductor Components Industries, LLC, 2015
1
Publication Order Number:
February, 2022 − Rev. 4
US1MFA/D
US1AFA−US1MFA
ABSOLUTE MAXIMUM RATINGS (Values are at T = 25°C unless otherwise noted)
A
US1
AFA
US1
BFA
US1
DFA
US1
FFA
US1
GFA
US1
JFA
US1
KFA
US1
MFA
Symbol
Parameter
Repetitive Peak Reverse Voltage
Unit
V
V
RRM
V
RMS
50
35
50
100
70
200
140
200
300
210
300
400
280
400
600
420
600
800
560
800
1000
700
RMS Reverse Voltage
V
V
R
DC Blocking Voltage
100
1000
V
I
Average Forward Rectified Current
1
A
F(AV)
I
Peak Forward Surge Current: 8.3 ms Single Half
Sine−Wave Superimposed on Rated Load
30
A
FSM
T
Operating Junction Temperature Range
Storage Temperature Range
−55 to +150
−55 to +150
°C
°C
J
T
STG
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Values are at T = 25°C unless otherwise noted)
A
Symbol
Parameter
Typical Thermal Resistance, Junction to Lead
Typical Thermal Resistance, Junction to Ambient
Value
21
Unit
°C/W
°C/W
Y
JL
R
153
θ
JA
NOTE: Device mounted at minimum pad.
ELECTRICAL CHARACTERISTICS (Values are at T = 25°C unless otherwise noted)
A
Symbol
Parameter
Conditions US1
AFA
US1
BFA
US1
DFA
US1
FFA
US1
GFA
US1
JFA
US1
KFA
US1
MFA
Unit
V
F
Maximum Instantaneous Forward I = 1 A
0.95
1.30
1.70
V
F
Voltage (Note 1)
I
R
Maximum Reverse Current at
Rated V
T = 25°C
5
mA
J
R
T = 125°C
J
150
C
Typical Junction Capacitance
V
= 4.0 V,
20
50
15
75
pF
ns
J
R
f = 1.0 MHz
T
rr
Maximum Reverse Recovery
Time
I = 0.5 A,
F
R
I
= 1 A,
I = 0.25 A
rr
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse test with PW = 300 ms, 1% duty cycle.
www.onsemi.com
2
US1AFA−US1MFA
TYPICAL PERFORMANCE CHARACTERISTICS
TJ=125
TJ=25
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
LEAD TEMPERATURE (o
C)
Figure 1. Maximum Forward Current Derating
Voltage
Figure 2. Typical Reverse Characteristics
US1AFA−US1DFA
8.3 ms Single Half Sine Wave
US1GFA
US1JFA−US1MFA
NUMBER OF CYCLES AT 60 Hz
FORWARD VOLTAGE (V)
Figure 3. Maximum Non−Repetitive Forward Surge
Figure 4. Typical Instantaneous Forward
Characteristics
Current
US1AFA−US1GFA
US1JFA−US1MFA
REVERSE VOLTAGE (V)
Figure 5. Typical Junction Capacitance
Figure 6. Reverse Recovery Time Characteristic
and Test Circuit Diagram
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOD−123FA
CASE 425AB
ISSUE A
DATE 11 AUG 2022
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13722G
SOD−123FA
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号:
©2020 ICPDF网 联系我们和版权申明