NCS2584DTBR2G [ONSEMI]
Video Amplifier, 4-Channel, with Load Detection and Signal Detection;
| 型号： | NCS2584DTBR2G |
| 厂家： | 
ONSEMI |
| 描述： | Video Amplifier, 4-Channel, with Load Detection and Signal Detection |
| 文件： | 总17页 (文件大小：353K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NCS2584
Four-Channel Video Driver
with Load Detection and
Signal Detection
The NCS2584 is a 4−channel high speed video driver with 6th order
Butterworth Reconstruction filters on each channel. A first set of
3−channel has High Definition (HD) 34 MHz filters, one per channel.
A fourth channel offers an extra driver for Cvbs−type video signal
with an 8 MHz filter. The NCS2584 is in fact a combination of a triple
HD video driver plus a single Cvbs video driver.
In addition, this four channel video driver integrates an auto
shutdown function in order to detect the moment when the DAC is
turned on or off. It also embeds a load detection to lower the power
consumption when the TV is unplugged. To further reduce the layout
and software complexity, the NCS2584 will automatically turn off
without any external command. These features help significantly the
systems like Blu−Ray™ players or Set Top Boxes to be in line with the
restricting energy saving standards on standby modes.
It is designed to be compatible with Digital−to−Analog Converters
(DAC) embedded in most video processors.
All channels can accept DC or AC coupled signals. In case of
AC−coupled inputs, the internal clamps are enabled. The outputs can
drive both AC and DC coupled 150 W loads but also two loads of
150 W in parallel.
http://onsemi.com
MARKING
DIAGRAM
14
14
NCS
2584
ALYW
1
1
TSSOP−14
CASE 948G
A, AA = Assembly Location
Y
W
G
= Year
= Work Week
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8473/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 15 of this data sheet.
Features
• 3 High Definition Filters with 6 Order Butterworth Filter and
th
34 MHz Bandwidth for YPbPr 1080i
Related Resource:
• One Cvbs Driver Including 6th Order Butterworth 8 MHz Filter
• Integrated Automatic Shutdown Function to Improve Power
Consumption Savings When the DAC is Off
• Integrated Load Detection for TV Presence
Refer to Application Note AND9046/D for details
regarding Load Detection and Application Note
AND8473/D for details on input video signal
detection
• Low Pin Count for Layout Simplification
• Internal Fixed Gain: 6 dB $0.2
• AC or DC Coupled Inputs and Outputs
• Each channel Capable to Drive 2 Loads of 150 W in Parallel
• Operating Supply Voltage Range: +3.3 V and 5.0 V
• TSSOP14 Package
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Application
• Set Top Box Decoder
• DVD and Blu−Ray Player / Recorder
• HDTV, Home Theatre
© Semiconductor Components Industries, LLC, 2012
1
Publication Order Number:
August, 2012 − Rev. 0
NCS2584/D
NCS2584
Cvbs IN
HD IN1
HD IN2
HD IN3
GND
1
2
3
4
5
6
7
14
13
12
11
10
9
Cvbs OUT
HD OUT1
HD OUT2
HD OUT3
VCC
NC
NC
NC
NC
8
(Top View)
Figure 1. Pinouts
NCS2584
Shutdown
Detection
6 dB
6 dB
Transparent Clamp
Transparent Clamp
Transparent Clamp
Transparent Clamp
Cvbs IN
HD IN1
HD IN2
HD IN3
1
2
3
14
13
Cvbs OUT
HD OUT1
th
8 MHz, 6 Order
th
34 MHz, 6 Order
12 HD OUT2
6 dB
6 dB
th
34 MHz, 6 Order
HD OUT3
VCC
11
10
9
4
5
th
34 MHz, 6 Order
Output Load
Detection
GND
NC
6
7
NC
NC
8
NC
Figure 2. NCS2584 TSSOP−14 Block Diagram
http://onsemi.com
2
NCS2584
TSSOP−14 PIN DESCRIPTION
Pin No.
Name
Cvbs IN
HD IN1
HD IN2
HD IN3
GND
Type
Input
Input
Input
Input
Ground
NC
Description
1
2
Cvbs Input Channel
High Definition Input 1
High Definition Input 2
High Definition Input 3
Ground
3
4
5
6
NC
No Connection
7
NC
NC
No Connection
8
NC
NC
No Connection
9
NC
NC
No Connection
10
11
12
13
14
VCC
Power
Output
Output
Output
Output
Power Supply 3.3 V or 5 V
High Definition Output 3
High Definition Output 2
High Definition Output 1
Cvbs Output Channel
HD OUT3
HD OUT2
HD OUT1
Cvbs OUT
http://onsemi.com
3
NCS2584
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Vdc
Vdc
Vdc
mA
°C
Power Supply Voltages
Input Voltage Range
V
CC
−0.3 v V v 5.5
CC
V
I/O
−0.3 v V v V
I
CC
Input Differential Voltage Range
V
ID
−0.3 v V v V
I
CC
Output Current (Indefinitely) per Channel
Maximum Junction Temperature (Note 1)
Operating Ambient Temperature
Storage Temperature Range
I
O
40
T
J
150
T
A
−40 to +85
−60 to +150
125
°C
T
stg
°C
Thermal Resistance, Junction−to−Air
ESD Protection Voltage (HBM)
R
°C/W
V
q
JA
V
esd
6000
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Power dissipation must be considered to ensure maximum junction temperature (T ) is not exceeded.
J
1800
1600
1400
1200
1000
800
600
400
200
0
Maximum Power Dissipation
The maximum power that can be safely dissipated is
limited by the associated rise in junction temperature. For
the plastic packages, the maximum safe junction
temperature is 150°C. If the maximum is exceeded
momentarily, proper circuit operation will be restored as
soon as the die temperature is reduced. Leaving the device
in the “overheated” condition for an extended period can
result in device burnout. To ensure proper operation, it is
important to observe the derating curves.
−40 −30−20−10
0
10 20 30 40 50 60 70 80 90100
TEMPERATURE (°C)
Figure 3. Power Dissipation vs Temperature
http://onsemi.com
4
NCS2584
DC ELECTRICAL CHARACTERISTICS (V = +3.3 V, T = 25°C; unless otherwise specified)
CC
A
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
POWER SUPPLY
I
I
I
I
I
All channel Loaded 150 W, signal on all inputs, including the load current
Shutdown current, no load, no input signal
73
5
120
10
mA
mA
CC
CC sh1
CC sh2
CC SD
CC HD
Shutdown current, no load, with input signal on all inputs
Only the SD channel loaded 150 W, signal on all inputs
Only the 3 HD channels loaded 150 W, signal on all inputs
9
40
mA
20
53
mA
mA
DC PERFORMANCE
V
V
Input Common Mode Voltage Range
Output Voltage High Level
V
CC
= 3.3 V or 5 V
GND
1.4
V
PP
cm
V
CC
V
CC
−0.25
V
OH
−0.4
V
Output Voltage Low Level
Output Current
280
400
mV
mA
OL
I
O
38
AC ELECTRICAL CHARACTERISTICS FOR STANDARD DEFINITION CHANNELS (V = +3.3 V, V = 1 V
,
CC
in
PP
R
= 75 W, T = 25°C, inputs AC−coupled with 0.1 mF, all outputs AC−coupled with 220 mF into 150 W referenced to 400 kHz;
source
A
unless otherwise specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
dB
A
VSD
Voltage Gain
V
in
= 1 V − All SD Channels
5.8
6.0
6.2
BW
Low Pass Filter Bandwidth
−1 dB (Note 2)
−3 dB
5.5
6.5
7.2
8.0
MHz
SD
A
RSD
Stop−band Attenuation
Stop−band Attenuation (Note 2)
@ 16 MHz
@ 27 MHz
18
43
25
50
dB
dG
Differential Gain Error
0.7
0.7
%
°
SD
dF
Differential Phase Error
Total Harmonic Distortion
Channel−to−Channel Crosstalk
Signal−to−Noise Ratio
SD
THD
V
= 1.4 V @ 3.58 MHz
0.35
−57
72
%
dB
dB
out
PP
X
SD
@ 1 MHz and V = 1.4 V
in PP
SNR
NTC−7 Test Signal, 100 kHz
to 4.2 MHz (Note 3)
SD
Dt
Propagation Delay
@ 4.5 MHz
70
20
ns
ns
SD
DGD
Group Delay Variation
100 kHz to 8 MHz
SD
2. Guaranteed by characterization.
3. SNR = 20 x log (714 mV / RMS noise)
http://onsemi.com
5
NCS2584
AC ELECTRICAL CHARACTERISTICS FOR HIGH DEFINITION CHANNELS (V = +3.3 V, V = 1 V , R = 75 W,
PP source
CC
in
T = 25°C, inputs AC−coupled with 0.1 mF, all outputs AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless otherwise
A
specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
dB
A
VHD
Voltage Gain
V
in
= 1 V − All HD Channels
5.8
6.0
6.2
BW
Low Pass Filter Bandwidth
Stop−band Attenuation
Total Harmonic Distortion
−1 dB (Note 4)
−3 dB
26
30
31
34
MHz
HD
A
RHD
@ 44.25 MHz
@ 74.25 MHz (Note 4)
8
33
15
42
dB
%
THD
V
= 1.4 V @ 10 MHz
0.4
0.6
0.8
HD
out
PP
V
= 1.4 V @ 15 MHz
out
PP
V
out
= 1.4 V @ 20 MHz
PP
X
Channel−to−Channel Crosstalk
Signal−to−Noise Ratio
@ 1 MHz and V = 1.4 V
PP
−60
dB
dB
HD
in
SNR
White Signal, 100 kHz to 30 MHz,
(Note 5)
72
HD
Dt
Propagation Delay
25
10
ns
ns
HD
DGD
Group Delay Variation from 100 kHz to
30 MHz
HD
4. Guaranteed by characterization.
5. SNR = 20 x log (714 mV / RMS noise)
TIMING CHARACTERISTICS (V = +3.3 V, V = 1 V , R
= 75 W, T = 25°C, inputs AC−coupled with 0.1 mF, all outputs
A
AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless otherwise specified)
CC
in
PP source
Symbol
Characteristics
Turn ON Time (Note 6)
Turn OFF Time
6. Guaranteed by characterization.
Conditions
Min
Typ
2
Max
10
Unit
ms
T
on
T
off
When 0 V Detected on Inputs
200
400
ms
http://onsemi.com
6
NCS2584
DC ELECTRICAL CHARACTERISTICS (V = +5 V, T = 25°C; unless otherwise specified)
CC
A
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
POWER SUPPLY
I
I
I
I
I
All channel Loaded 150 W, signal on all inputs, including the load current
Shutdown current, no load, no input signal
88
7
120
10
mA
mA
CC
CC sh1
CC sh2
CC SD
CC HD
Shutdown current, no load, with input signal on all inputs
Only the SD channel loaded 150 W, signal on all inputs
Only the 3 HD channels loaded 150 W, signal on all inputs
11
22
66
40
mA
mA
mA
DC PERFORMANCE
V
V
Input Common Mode Voltage Range
Output Voltage High Level
V
CC
= 3.3 V or 5 V
GND
1.4
V
PP
cm
V
CC
V
CC
−0.25
V
OH
−0.4
V
Output Voltage Low Level
Output Current
280
400
mV
mA
OL
I
O
38
AC ELECTRICAL CHARACTERISTICS FOR STANDARD DEFINITION CHANNELS (V = +5 V, V = 1 V , R =
PP source
CC
in
75 W, T = 25°C, inputs AC−coupled with 0.1 mF, all outputs AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless
A
otherwise specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
dB
A
VSD
Voltage Gain
V
in
= 1 V − All SD Channels
5.8
6.0
6.2
BW
Low Pass Filter Bandwidth
MHz
SD
−1 dB (Note 7)
−3 dB
5.5
6.5
7.2
8.0
A
RSD
Stop−band Attenuation
Stop−band Attenuation (Note 7)
@ 16 MHz
@ 27 MHz
18
43
25
50
dB
dG
Differential Gain Error
0.7
0.7
%
°
SD
dF
Differential Phase Error
Total Harmonic Distortion
Channel−to−Channel Crosstalk
Signal−to−Noise Ratio
SD
THD
V
= 1.4 V @ 3.58 MHz
0.35
−57
72
%
dB
dB
out
PP
X
SD
@ 1 MHz and V = 1.4 V
in PP
SNR
NTC−7 Test Signal, 100 kHz
to 4.2 MHz (Note 8)
SD
Dt
Propagation Delay
@ 4.5 MHz
70
20
ns
ns
SD
DGD
Group Delay Variation
100 kHz to 8 MHz
SD
7. Guaranteed by characterization.
8. SNR = 20 x log (714 mV / RMS noise)
http://onsemi.com
7
NCS2584
AC ELECTRICAL CHARACTERISTICS FOR HIGH DEFINITION CHANNELS (V = 5 V, V = 1 V , R
= 75 W, T =
A
CC
in
PP source
25°C, inputs AC−coupled with 0.1 mF, all outputs AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless otherwise specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
dB
A
VHD
Voltage Gain
V
in
= 1 V − All HD Channels
5.8
6.0
6.2
BW
Low Pass Filter Bandwidth
Stop−band Attenuation
Total Harmonic Distortion
−1 dB (Note 9)
−3 dB
26
30
31
34
MHz
HD
A
RHD
@ 44.25 MHz
@ 74.25 MHz (Note 9)
8
33
15
42
dB
%
THD
V
= 1.4 V @ 10 MHz
0.4
0.6
0.8
HD
out
PP
V
= 1.4 V @ 15 MHz
out
PP
V
out
= 1.4 V @ 20 MHz
PP
X
Channel−to−Channel Crosstalk
Signal−to−Noise Ratio
@ 1 MHz and V = 1.4 V
PP
−60
dB
dB
HD
in
SNR
White Signal, 100 kHz to 30 MHz,
(Note 10)
72
HD
Dt
Propagation Delay
25
10
ns
ns
HD
DGD
Group Delay Variation from 100 kHz to
30 MHz
HD
9. Guaranteed by characterization.
10.SNR = 20 x log (714 mV / RMS noise)
TIMING CHARACTERISTICS (V = +5 V, V = 1 V , R
= 75 W, T = 25°C, inputs AC−coupled with 0.1 mF, all outputs
A
AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless otherwise specified)
CC
in
PP source
Symbol
Characteristics
Turn ON Time (Note 11)
Turn OFF Time
11. Guaranteed by characterization.
Conditions
Min
Typ
2
Max
10
Unit
ms
T
on
T
off
When 0 V Detected on Inputs
200
400
ms
http://onsemi.com
8
NCS2584
TYPICAL CHARACTERISTICS
= 75 W, T = 25°C, Inputs AC−coupled with 0.1 mF, All Outputs AC−coupled with 220 mF into 150 W
V
CC
= +3.3 V, V = 1 V , R
in
PP source
A
Referenced to 400 kHz; unless otherwise specified
30
20
10
0
30
20
10
0
−10
−20
−30
−10
−20
−30
−1 dB @ 7.2 MHz
−3 dB @ 8.5 MHz
−47 dB @ 27 MHz
−1 dB @ 29 MHz
−3 dB @ 33 MHz
−16 dB @ 44.25 MHz
−38 dB @ 74.25 MHz
−40
−50
−60
−70
−40
−50
−60
−70
100k
1M
10M
100M
100k
1M
10M
100M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 4. SD Normalized Frequency Response
Figure 5. HD Normalized Frequency Response
0
−10
−20
−30
−40
−50
−60
−70
60
50
40
30
20
10
0
10 ns @ 24 MHz
−34.6 dB @ 23 MHz
−55 dB @ 50 kHz
1.E+04
1.E+05
1.E+06
1.E+07
1.E+08
1.E+05
1.E+06
1.E+07
1.E+08
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 7. HD Normalized Group Delay
Figure 6. Channel−to−Channel Crosstalk
http://onsemi.com
9
NCS2584
TYPICAL CHARACTERISTICS
= 75 W, T = 25°C, Inputs AC−coupled with 0.1 mF, All Outputs AC−coupled with 220 mF into 150 W
V
CC
= +3.3 V, V = 1 V , R
in
PP source
A
Referenced to 400 kHz; unless otherwise specified
Output
Input
0.7 V
PP
Output
25 ns
70 ns
0.7 V
PP
Input
Figure 8. SD Propagation Delay
Figure 9. HD Propagation Delay
Input
Input
Output
Output
200 mV
200 mV
Figure 10. SD Small Signal Response
Figure 11. HD Small Signal Response
Output
Input
Output
Input
1 V
PP
1 V
PP
Figure 12. SD Large Signal Response
Figure 13. HD Large Signal Response
http://onsemi.com
10
NCS2584
TYPICAL CHARACTERISTICS
= 75 W, T = 25°C, Inputs AC−coupled with 0.1 mF, All Outputs AC−coupled with 220 mF into 150 W
V
CC
= +3.3 V, V = 1 V , R
in
PP source
A
Referenced to 400 kHz; unless otherwise specified
60
20
10
0
50
−10
−20
−30
−40
−50
−60
40
0
−10
−20
−30
−40
−50
−60
−70
−80
30
20
10
0
−10
−20
−30
−40
400k
1M
10M
50M
1.E+04
1.E+05
1.E+06
1.E+07
1.E+08
(Hz)
FREQUENCY (Hz)
Figure 14. SD Frequency Response and Group
Delay
Figure 16. SD and HD VCC PSRR vs.
Frequency
20
35
30
25
20
15
10
5
10
0
−10
−20
−30
−40
−50
−60
−70
−80
0
−5
−10
−15
400k
1M
10M
100M
(Hz)
Figure 15. HD Frequency Response and
Group Delay
0.25
0.2
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.15
0.1
0.05
0
0
0
1st
−0.05
0
1st
2nd
3rd
4th
5th
6th
2nd
3rd
4th
5th
6th
HARMONIC
HARMONIC
Figure 17. SD Differential Gain
Figure 18. SD Differential Phase
http://onsemi.com
11
NCS2584
APPLICATIONS INFORMATION
The NCS2584 quad video driver has been optimized for
implemented with stand alone op amps. An internal level
shifter is employed shifting up the output voltage by adding
an offset of 280 mV on the outputs. This prevents sync pulse
clipping and allows DC−coupled output to the 150 W video
Standard and High Definition video applications covering
the requirements of the standards Composite video (Cvbs),
Component Video (720p/1080i). The three HD channels
have 34 MHz filters to cover high definition−like video
applications. A fourth channel implements one standard
definition filter of 8 MHz bandwidth to drive the Cvbs
signal.
In the regular mode of operation, each channel provides
an internal voltage−to−voltage gain of 2 from input to
output. This effectively reduces the number of external
components required as compared to discrete approach
th
load. In addition, the NCS2584 integrates a 6 order
Butterworth filter for each. This allows rejection of the
aliases or unwanted over-sampling effects produced by the
video DAC. Similarly for the case of DVD recorders which
use a ADC, this anti−aliasing filter (reconstruction filter)
will avoid picture quality issue and will help filtration of
parasitic signals caused by EMI interference.
V
CC
10 mF
0.1 mF
10
1
5
VCC
GND
TV
0.1 mF
220 mF
220 mF
220 mF
75 W
Cvbs IN
Cvbs OUT
Cvbs
Y / G
14
Rs
75 W
75 W
0.1 mF
0.1 mF
75 W
75 W
HD OUT1
HD OUT2
2
3
13
12
HD IN1
HD IN2
HD IN3
Rs
Rs
Pb / B
Pr / R
75 W
75 W
220 mF
0.1 mF
75 W
HD OUT3
4
11
Rs
Figure 19. AC−Coupled Configuration at the Input and Output
A built−in diode−like clamp is used into the chip for each
channel to support the AC−coupled mode of operation. The
clamp is active when the input signal goes below 0 V.
The built−in clamp and level shifter allow the device to
operate in different configuration modes depending on the
DAC output signal level and the input common mode
voltage of the video driver. When the configuration is
DC−Coupled at the Inputs and Outputs, the 0.1 mF and
220 mF coupling capacitors are no longer used, and the
clamps are in that case inactive; this configuration provides
a low cost solution which can be implemented with few
external components (Figure 19). It also require the user the
ensure the input voltage range stays within 0 V to 1.4 V.
The input is AC−coupled when either the input−signal
amplitude goes over the range 0 V to 1.4 V. Activating the
clamp becomes mandatory and the use of the 0.1 mF is
necessary.
coupling configuration ensures the maximum compatibility
with all sorts of displays.
Shutdown Mode
The NCS2584 integrates a shutdown mode function
which allows the device to detect when the video DAC turns
on or off. When the video DACs turn ON, the video drivers
will turn ON on as soon as they detect a stimulus. Meanwhile
if any glitch happens on the input line, embedded filters will
ignore them to prevent undesired behavior. In this case, the
turn on time is typically around 2 ms to avoid any missing
information. When the chipset turns on, it has to go through
a boot sequence which is significantly longer than this turn
on time. Then, the video drivers will go to a shutdown mode
in order to significantly lower the power consumption only
when no more stimulus is detected from the video DACs. In
addition, the NCS2584 integrates also a load detection
function. It only occurs on the Cvbs which is an independent
signal and the fist HD channel which contains the
synchronization information. It identify when the user plugs
the analog video lines of the TV or not. If these are not
plugged, then the device goes into a standby mode to reduce
the power consumption of the system. The device is in fact
The output AC−coupling configuration is advantageous
for eliminating DC ground loop with the drawback of
making the device more sensitive to video line or field tilt
issues. In some cases, it may be necessary to increase the
nominal 220 mF capacitor value. Meanwhile the AC
http://onsemi.com
12
NCS2584
capable of recognizing the load of the TV. With the
The problems of field tilt effects on the video signal are
also eliminated providing the best video quality with
optimal dynamic or peak−to−peak amplitude of the video
signal allowing operating thanks to the built−in level shifter
without risk of signal clipping. In this coupling
configuration the average output voltage is higher than 0 V
and the power consumption can be a little higher than with
an AC−coupled configuration.
ENERGY STAR® requirements, these innovative and
patented features will perfectly fit with the power saving
specifications.
DC−Coupled Output
The outputs of the NCS2584 can be DC−coupled to a
150 W load (Figure 20). This has the advantage of
eliminating the AC−coupling capacitors at the output by
reducing the number of external components and saving
space on the board. This can be a key advantage for some
applications with limited space.
V
CC
10 mF
0.1 mF
10
1
5
VCC
GND
TV
0.1 mF
75 W
Cvbs IN
Cvbs OUT
14
Cvbs
Y / G
75 W
Rs
0.1 mF
0.1 mF
75 W
HD OUT1
13
2
HD IN1
HD IN2
HD IN3
75 W
Rs
Rs
75 W
HD OUT2
12
Pb / B
Pr / R
3
75 W
0.1 mF
75 W
HD OUT3
11
4
Rs
75 W
Figure 20. AC−Coupled Input and DC−Coupled Output Configuration
V
CC
10 mF
0.1 mF
10
1
5
VCC
GND
TV
220 mF
220 mF
220 mF
75 W
Cvbs IN
Cvbs OUT
Cvbs
Y / G
14
75 W
Rs
75 W
75 W
HD OUT1
HD OUT2
2
3
13
12
HD IN1
HD IN2
HD IN3
75 W
Rs
Rs
Pb / B
Pr / R
75 W
75 W
220 mF
75 W
HD OUT3
4
11
Rs
Figure 21. DC−Coupled Inputs and AC−Coupled Outputs
http://onsemi.com
13
NCS2584
V
CC
10 mF
0.1 mF
10
1
5
VCC
GND
TV
75 W
Cvbs IN
Cvbs OUT
Cvbs
Y / G
14
75 W
Rs
75 W
75 W
HD OUT1
HD OUT2
2
3
13
12
HD IN1
HD IN2
HD IN3
Rs
Rs
75 W
75 W
Pb / B
Pr / R
75 W
HD OUT3
4
11
Rs
75 W
Figure 22. DC−Coupled Inputs and Outputs
V
CC
10 mF
0.1 mF
220 mF
220 mF
75 W
75 W
TV
10
1
5
VCC
GND
75 W
0.1 mF
Cvbs IN
Cvbs OUT
Cvbs
Y / G
14
13
12
11
Rs
75 W
75 W
75 W
75 W
220 mF
75 W
0.1 mF
0.1 mF
HD OUT1
HD OUT2
2
3
HD IN1
HD IN2
HD IN3
Rs
Rs
220 mF
220 mF
75 W
75 W
Pb / B
Pr / R
0.1 mF
HD OUT3
4
Rs
220 mF
220 mF
75 W
75 W
75 W
75 W
75 W
220 mF
75 W
Figure 23. NCS2584 Driving 2 Loads in Parallel for SCART Applications
http://onsemi.com
14
NCS2584
Video Driving Capability
ESD Protection
With an output current capability of 40 mA the NCS2584
was designed to be able to drive at least two video display
loads in parallel. This type of application is illustrated in
Figure 23. Figure 24 (multiburst) and Figure 25 (linearity)
show that the video signal can efficiently drive a 75 W
equivalent load and not degrade the video performance.
All the device pins are protected against electrostatic
discharge at a level of 6 kV following HBM JEDEC
standards. This feature has been considered with a particular
attention with ESD structure able to sustain the typical
values requested by the systems like Set Top Boxes or
Blue−Ray players. This parameter is particularly important
for video driver which usually constitutes the last stage in the
video chain before the video output connector.
Figure 24. Multiburst Test with Two 150 ꢀ Loads
Figure 25. Linearity Test with Two 150 ꢀ Loads
ORDERING INFORMATION
†
Device
NCS2584DTBR2G
Package
Shipping
TSSOP−14
(Pb−Free)
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
15
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TSSOP−14 WB
CASE 948G
ISSUE C
14
DATE 17 FEB 2016
1
SCALE 2:1
NOTES:
14X K REF
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
M
S
S
V
0.10 (0.004)
T U
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD
FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH OR GATE BURRS SHALL NOT
EXCEED 0.15 (0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE
INTERLEAD FLASH OR PROTRUSION.
INTERLEAD FLASH OR PROTRUSION SHALL
NOT EXCEED 0.25 (0.010) PER SIDE.
5. DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 (0.003) TOTAL
IN EXCESS OF THE K DIMENSION AT
MAXIMUM MATERIAL CONDITION.
S
0.15 (0.006) T U
N
0.25 (0.010)
14
8
2X L/2
M
B
L
N
−U−
PIN 1
IDENT.
F
7
1
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
DETAIL E
7. DIMENSION A AND B ARE TO BE
DETERMINED AT DATUM PLANE −W−.
S
K
0.15 (0.006) T U
A
−V−
MILLIMETERS
DIM MIN MAX
INCHES
MIN MAX
K1
A
B
C
D
F
G
H
J
4.90
4.30
−−−
0.05
0.50
5.10 0.193 0.200
4.50 0.169 0.177
J J1
1.20
−−− 0.047
0.15 0.002 0.006
0.75 0.020 0.030
SECTION N−N
0.65 BSC
0.026 BSC
0.60 0.020 0.024
0.20 0.004 0.008
0.16 0.004 0.006
0.30 0.007 0.012
0.25 0.007 0.010
0.50
0.09
0.09
0.19
J1
K
−W−
C
K1 0.19
L
M
6.40 BSC
0.252 BSC
0.10 (0.004)
0
8
0
8
_
_
_
_
SEATING
PLANE
−T−
H
G
DETAIL E
D
GENERIC
MARKING DIAGRAM*
14
SOLDERING FOOTPRINT
XXXX
XXXX
ALYWG
G
7.06
1
1
A
L
= Assembly Location
= Wafer Lot
Y
W
G
= Year
= Work Week
= Pb−Free Package
0.65
PITCH
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
01.34X6
14X
1.26
DIMENSIONS: MILLIMETERS
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98ASH70246A
TSSOP−14 WB
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号：
©2020 ICPDF网 联系我们和版权申明