NCP301LSN18T2G [ONSEMI]
Voltage Detector Series;型号: | NCP301LSN18T2G |
厂家: | ONSEMI |
描述: | Voltage Detector Series |
文件: | 总25页 (文件大小:171K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NCP300, NCP301
Voltage Detector Series
The NCP300 and NCP301 series are second generation ultra−low
current voltage detectors. These devices are specifically designed for
use as reset controllers in portable microprocessor based systems
where extended battery life is paramount.
Each series features a highly accurate undervoltage detector with
hysteresis which prevents erratic system reset operation as the
comparator threshold is crossed.
www.onsemi.com
MARKING DIAGRAM
The NCP300 series consists of complementary output devices that
are available with either an active high or active low reset output. The
NCP301 series has an open drain N−Channel output with either an
active high or active low reset output.
The NCP300 and NCP301 device series are available in the
Thin TSOP−5 package with standard undervoltage thresholds.
Additional thresholds that range from 0.9 V to 4.9 V in 100 mV steps
can be manufactured.
5
TSOP−5/
SOT23−5
CASE 483
xxx AYWG
5
G
1
1
xxx
A
Y
W
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
Features
• Quiescent Current of 0.5 mA Typical
• High Accuracy Undervoltage Threshold of 2.0%
• Wide Operating Voltage Range of 0.8 V to 10 V
• Complementary or Open Drain Reset Output
• Active Low or Active High Reset Output
(Note:Microdot may be in either location)
PIN CONNECTIONS
Reset
1
2
3
5
N.C.
Output
Input
• Specified Over the −40°C to +125°C Temperature Range
(Except for Voltage Options from 0.9 to 1.1 V)
4
N.C.
Ground
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
(Top View)
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
ORDERING INFORMATION
See detailed ordering and shipping information in the ordering
information section on page 21 of this data sheet.
• Microprocessor Reset Controller
• Low Battery Detection
• Power Fail Indicator
• Battery Backup Detection
NCP301xSNxxT1
NCP300xSNxxT1
Open Drain Output Configuration
Complementary Output Configuration
2
2
1
Input
Input
Reset Output
1
*
*
Reset Output
V
ref
V
ref
3
3
GND
GND
* The representative block diagrams depict active low reset output ‘L’ suffix devices. The comparator
inputs are interchanged for the active high output ‘H’ suffix devices.
This device contains 25 active transistors.
Figure 1. Representative Block Diagrams
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
October, 2017 − Rev. 30
NCP300/D
NCP300, NCP301
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Input Power Supply Voltage (Pin 2)
V
12
V
V
in
Output Voltage (Pin 1)
V
OUT
Complementary, NCP300
N−Channel Open Drain, NCP301
−0.3 to V +0.3
−0.3 to 12
in
Output Current (Pin 1) (Note 2)
Thermal Resistance Junction−to−Air
Maximum Junction Temperature
I
70
mA
°C/W
°C
OUT
R
250
q
JA
J
T
+150
Operating Ambient Temperature Range
All Voltage Options: 0.9 V to 1.1 V
All Voltage Options: 1.2 V to 4.9 V
T
T
A
−40 to +85
−40 to +125
°C
°C
A
Storage Temperature Range
Moisture Sensitivity Level
T
−55 to +150
1
°C
stg
MSL
Latchup Performance (Note 3)
I
mA
LATCHUP
Positive
Negative
200
200
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per MIL−STD−883, Method 3015.
Machine Model Method 200 V.
2. The maximum package power dissipation limit must not be exceeded.
T
* T
J(max)
A
P
+
D
R
qJA
3. Maximum ratings per JEDEC standard JESD78.
www.onsemi.com
2
NCP300, NCP301
ELECTRICAL CHARACTERISTICS (For all values T = −40°C to +125°C, unless otherwise noted.)
A
Characteristic
Symbol
Min
Typ
Max
Unit
NCP300/1 − 0.9 / NCV300/1 − 0.9 (T = 255C for voltage options from 0.9 to 1.1 V)
A
Detector Threshold (Pin 2, V Decreasing)
V
DET−
0.882
0.027
0.900
0.045
0.918
0.063
V
V
in
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
in
Supply Current (Pin 2)
I
in
mA
−
−
0.20
0.45
0.6
1.2
(V = 0.8 V)
in
(V = 2.9 V)
in
Maximum Operating Voltage (Pin 2)
Minimum Operating Voltage (Pin 2)
(T = −40°C to 85°C)
A
V
−
−
10
V
V
in(max)
V
−
−
0.55
0.65
0.70
0.80
in(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
mA
ms
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
0.05
0.05
0.50
−
−
(V
OUT
(V
OUT
= 0.05 V, V = 0.70 V)
in
= 0.50 V, V = 0.85 V)
in
P−Channel Source Current, NCP300
(V = 2.4 V, V = 4.5 V)
1.0
6.0
2.5
−
−
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
OUT
1.05
(V
OUT
= 0.5 V, V = 1.5 V)
in
P−Channel Source Current, NCP300
0.011
0.014
0.04
0.08
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 0.8 V)
in
Propagation Delay Input to Output (Figure 2)
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
97
77
−
300
pHL
pLH
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
97
−
−
300
pHL
pLH
NCP300/1 − 1.8 / NCV300/1 − 1.8
Detector Threshold (Pin 2, V Decreasing) (T = 25°C)
V
DET−
1.764
1.746
1.80
−
1.836
1.854
V
in
A
(T = −40°C to 125°C)
A
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
0.054
0.090
0.126
V
in
Supply Current (Pin 2)
I
in
mA
−
−
0.23
0.48
0.7
1.3
(V = 1.7 V)
in
(V = 3.8 V)
in
Maximum Operating Voltage (Pin 2)
V
−
−
10
V
V
in(max)
Minimum Operating Voltage (Pin 2) (T = 25°C)
(T = −40°C to 125°C)
A
V
−
−
0.55
0.65
0.70
0.80
A
in(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
mA
ms
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
1.0
0.05
2.0
−
−
(V
OUT
(V
OUT
= 0.05V, V = 0.70 V)
in
= 0.50V, V = 1.5 V)
in
P−Channel Source Current, NCP300
(V = 2.4 V, V = 4.5 V)
1.0
6.3
6.0
11
−
−
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
OUT
(V
OUT
= 0.5 V, V = 5.0 V)
in
P−Channel Source Current, NCP300
0.011
0.525
0.04
0.6
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 1.5 V)
in
Propagation Delay Input to Output (Figure 2)
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
73
94
−
300
pHL
pLH
www.onsemi.com
3
NCP300, NCP301
ELECTRICAL CHARACTERISTICS (continued) (For all values T = −40°C to +125°C, unless otherwise noted.)
A
Characteristic
NCP300/1 − 1.8 / NCV300/1 − 1.8
Symbol
Min
Typ
Max
Unit
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
−
−
73
−
−
300
pHL
t
pLH
NCP300/1 − 2.0 / NCV300/1 − 2.0
Detector Threshold (Pin 2, V Decreasing) (T = 25°C)
V
DET−
1.96
1.94
2.00
−
2.04
2.06
V
in
A
(T = −40°C to 125°C)
A
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
0.06
0.10
0.14
V
in
Supply Current (Pin 2)
I
in
mA
−
−
0.23
0.48
0.8
1.3
(V = 1.9 V)
in
(V = 4.0 V)
in
Maximum Operating Voltage (Pin 2)
V
−
−
10
V
V
in(max)
Minimum Operating Voltage (Pin 2) (T = 25°C)
(T = −40°C to 125°C)
A
V
−
−
0.55
0.65
0.70
0.80
A
in(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
mA
ms
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
1.0
0.14
3.5
−
−
(V
OUT
(V
OUT
= 0.05V, V = 0.70V)
in
= 0.50V, V = 1.5V)
in
P−Channel Source Current, NCP300
(V = 2.4V, V = 4.5V)
1.0
6.3
9.7
11
−
−
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
OUT
(V
OUT
= 0.5 V, V = 5.0 V)
in
P−Channel Source Current, NCP300
0.011
0.525
0.04
0.6
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 1.5 V)
in
Propagation Delay Input to Output (Figure 2)
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
55
108
−
300
pHL
pLH
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
55
−
−
300
pHL
pLH
NCP300/1 − 2.2 / NCV300/1 − 2.2
Detector Threshold (Pin 2, V Decreasing) (T = 25°C)
V
DET−
2.156
2.134
2.2
−
2.244
2.266
V
in
A
(T = −40°C to 125°C)
A
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
0.066
0.110
0.154
V
in
Supply Current (Pin 2)
I
in
mA
−
−
0.23
0.48
0.8
1.3
(V = 2.1 V)
in
(V = 4.2 V)
in
Maximum Operating Voltage (Pin 2)
V
−
−
10
V
V
in(max)
Minimum Operating Voltage (Pin 2) (T = 25°C)
(T = −40°C to 125°C)
A
V
−
−
0.55
0.65
0.70
0.80
A
in(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
mA
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
1.0
0.14
3.5
−
−
(V
OUT
(V
OUT
= 0.05V, V = 0.70V)
in
= 0.50V, V = 1.5V)
in
P−Channel Source Current, NCP300
(V = 2.4V, V = 4.5V)
1.0
6.3
9.7
11
−
−
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
OUT
(V
OUT
= 0.5 V, V = 5.0 V)
in
www.onsemi.com
4
NCP300, NCP301
ELECTRICAL CHARACTERISTICS (continued) (For all values T = −40°C to +125°C, unless otherwise noted.)
A
Characteristic
NCP300/1 − 2.2 / NCV300/1 − 2.2
P−Channel Source Current, NCP300
Symbol
Min
Typ
Max
Unit
0.011
0.525
0.04
0.6
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 1.5 V)
in
Propagation Delay Input to Output (Figure 2)
ms
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
−
−
55
108
−
300
pHL
t
pLH
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
55
−
−
300
pHL
pLH
NCP300/1− 2.7 / NCV300/1− 2.7
Detector Threshold (Pin 2, V Decreasing) (T = 25°C)
V
DET−
2.646
2.619
2.700
−
2.754
2.781
V
in
A
(T = −40°C to 125°C)
A
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
0.081
0.135
0.189
V
in
Supply Current (Pin 2)
I
in
mA
−
−
0.25
0.50
0.8
1.3
(V = 2.6 V)
in
(V = 4.7 V)
in
Maximum Operating Voltage (Pin 2)
V
−
−
10
V
V
in(max)
Minimum Operating Voltage (Pin 2) (T = 25°C)
(T = −40°C to 125°C)
A
V
−
−
0.55
0.65
0.70
0.80
A
in(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
mA
ms
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
1.0
0.14
3.5
−
−
(V
OUT
(V
OUT
= 0.05V, V = 0.70V)
in
= 0.50V, V = 1.5V)
in
P−Channel Source Current, NCP300
(V = 2.4V, V = 4.5V)
1.0
6.3
9.7
11
−
−
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
OUT
(V
OUT
= 0.5 V, V = 5.0 V)
in
P−Channel Source Current, NCP300
0.011
0.525
0.04
0.6
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 1.5 V)
in
Propagation Delay Input to Output (Figure 2)
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
55
115
−
300
pHL
pLH
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
55
−
−
300
pHL
pLH
NCP300/1− 2.8 / NCV300/1− 2.8
Detector Threshold (Pin 2, V Decreasing) (T = 25°C)
V
DET−
2.744
2.716
2.8
−
2.856
2.884
V
in
A
(T = −40°C to 125°C)
A
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
0.084
0.14
0.196
V
in
Supply Current (Pin 2)
I
in
mA
−
−
0.25
0.5
0.8
1.3
(V = 2.7 V)
in
(V = 4.8 V)
in
Maximum Operating Voltage (Pin 2)
V
−
−
10
V
V
in(max)
Minimum Operating Voltage (Pin 2) (T = 25°C)
(T = −40°C to 125°C)
A
V
−
−
0.55
0.65
0.7
0.8
A
in(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
1.0
0.14
3.5
−
−
(V
OUT
(V
OUT
= 0.05V, V = 0.70V)
in
= 0.50V, V = 1.5V)
in
www.onsemi.com
5
NCP300, NCP301
ELECTRICAL CHARACTERISTICS (continued) (For all values T = −40°C to +125°C, unless otherwise noted.)
A
Characteristic
NCP300/1− 2.8 / NCV300/1− 2.8
P−Channel Source Current, NCP300
Symbol
Min
1.0
6.3
Typ
9.7
11
Max
−
Unit
(V = 2.4V, V = 4.5V)
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
mA
OUT
−
(V
OUT
= 0.5 V, V = 5.0 V)
in
P−Channel Source Current, NCP300
0.011
0.525
0.04
0.6
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 1.5 V)
in
Propagation Delay Input to Output (Figure 2)
ms
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
55
115
−
300
pHL
pLH
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
55
−
−
300
pHL
pLH
NCP300/1 − 3.0 / NCV300/1 − 3.0
Detector Threshold (Pin 2, V Decreasing) (T = 25°C)
V
DET−
2.94
2.91
3.00
−
3.06
3.09
V
in
A
(T = −40°C to 125°C)
A
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
0.09
0.15
0.21
V
in
Supply Current (Pin 2)
I
in
mA
−
−
0.25
0.50
0.9
1.3
(V = 2.87 V)
in
(V = 5.0 V)
in
Maximum Operating Voltage (Pin 2)
V
−
−
10
V
V
in(max)
Minimum Operating Voltage (Pin 2) (T = 25°C)
(T = −40°C to 125°C)
A
V
−
−
0.55
0.65
0.70
0.80
A
in(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
mA
ms
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
1.0
0.14
3.5
−
−
(V
OUT
(V
OUT
= 0.05V, V = 0.70V)
in
= 0.50V, V = 1.5V)
in
P−Channel Source Current, NCP300
(V = 2.4V, V = 4.5V)
1.0
6.3
9.7
11
−
−
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
OUT
(V
OUT
= 0.5 V, V = 5.0 V)
in
P−Channel Source Current, NCP300
0.011
0.525
0.04
0.6
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 1.5 V)
in
Propagation Delay Input to Output (Figure 2)
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
49
115
−
300
pHL
pLH
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
49
−
−
300
pHL
pLH
NCP300/1 − 4.5 / NCV300/1 − 4.5
Detector Threshold (Pin 2, V Decreasing) (T = 25°C)
V
DET−
4.410
4.365
4.500
−
4.590
4.635
V
in
A
(T = −40°C to 125°C)
A
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
0.135
0.225
0.315
V
in
Supply Current (Pin 2)
I
in
mA
−
−
0.33
0.52
1.0
1.4
(V = 4.34 V)
in
(V = 6.5 V)
in
Maximum Operating Voltage (Pin 2)
V
−
−
10
V
in(max)
www.onsemi.com
6
NCP300, NCP301
ELECTRICAL CHARACTERISTICS (continued) (For all values T = −40°C to +125°C, unless otherwise noted.)
A
Characteristic
NCP300/1 − 4.5 / NCV300/1 − 4.5
Symbol
Min
Typ
Max
Unit
Minimum Operating Voltage (Pin 2) (T = 25°C)
V
in(min)
−
−
0.55
0.65
0.70
0.80
V
A
(T = −40°C to 125°C)
A
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
1.0
0.05
2.0
−
−
(V
OUT
(V
OUT
= 0.05V, V = 0.70V)
in
= 0.50V, V = 1.5V)
in
P−Channel Source Current, NCP300
(V = 5.9V, V = 8.0V)
1.5
6.3
10.5
11
−
−
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
mA
OUT
(V
OUT
= 0.5 V, V = 5.0 V)
in
P−Channel Source Current, NCP300
0.011
0.525
0.04
0.6
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 1.5 V)
in
Propagation Delay Input to Output (Figure 2)
ms
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
49
130
−
300
pHL
pLH
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
49
−
−
300
pHL
pLH
NCP300/1 − 4.7 / NCV300/1 − 4.7
Detector Threshold (Pin 2, V Decreasing) (T = 25°C)
V
DET−
4.606
4.559
4.700
−
4.794
4.841
V
in
A
(T = −40°C to 125°C)
A
Detector Threshold Hysteresis (Pin 2, V Increasing)
V
HYS
0.141
0.235
0.329
V
in
Supply Current (Pin 2)
I
in
mA
−
−
0.34
0.53
1.0
1.4
(V = 4.54 V)
in
(V = 6.7 V)
in
Maximum Operating Voltage (Pin 2)
V
−
−
10
V
V
in(max)
Minimum Operating Voltage (Pin 2) (T = 25°C)
(T = −40°C to 125°C)
A
V
−
−
0.55
0.65
0.70
0.80
A
in(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
I
mA
mA
ms
OUT
N−Channel Sink Current, NCP300, NCP301
0.01
1.0
0.05
2.0
−
−
(V
OUT
(V
OUT
= 0.05V, V = 0.70V)
in
= 0.50V, V = 1.5V)
in
P−Channel Source Current, NCP300
(V = 5.9V, V = 8.0V)
1.5
6.3
10.5
11
−
−
OUT
in
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
N−Channel Sink Current, NCP300, NCP301
I
OUT
(V
OUT
= 0.5 V, V = 5.0 V)
in
P−Channel Source Current, NCP300
0.011
0.525
0.04
0.6
−
−
(V
OUT
(V
OUT
= 0.4 V, V = 0.7 V)
in
= GND, V = 1.5 V)
in
Propagation Delay Input to Output (Figure 2)
Complementary Output NCP300 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
45
130
−
300
pHL
pLH
N−Channel Open Drain NCP301 Series
Output Transition, High to Low
Output Transition, Low to High
t
t
−
−
45
−
−
300
pHL
pLH
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
7
NCP300, NCP301
V
DET+
+ 2
Input Voltage, Pin 2
0.7
0 V
5 V
Reset Output Voltage, Pin 1
2.5 V
NCP301L
Open Drain
0.5 V
0 V
V
V
+ 2
DET+
+ 2
Reset Output Voltage, Pin 1
DET+
NCP300L
Complementary
2
0.1 V
0 V
t
t
pHL
pLH
NCP300 and NCP301 series are measured with a 10 pF capacitive load. NCP301 has an additional 470 k pull−up resistor connec-
ted from the reset output to +5.0 V. The reset output voltage waveforms are shown for the active low ‘L’ devices. The upper detector
threshold, V
is the sum of the lower detector threshold, V
plus the input hysteresis, V
.
DET+
DET−
HYS
Figure 2. Propagation Delay Measurement Conditions
www.onsemi.com
8
NCP300, NCP301
Table 1. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
Supply Current
Nch Sink Current
Detector Threshold
Hysteresis
Pch Source
Current
V
Low
V
High
V
in
Low
V
in
High
(mA)
NCP300 Series
Detector Threshold
in
in
in
in
I
(mA)
I
(mA)
I
(mA)
I
I
(mA)
OUT
OUT
OUT
(Note 5)
(Note 6)
(Note 7)
(Note 8)
(Note 9)
V
DET−
(V) (Note 4)
V
HYS
(V)
Min
Typ
Max
Min
Typ
Max
Typ
Typ
Typ
Typ
Typ
Part Number
NCP300LSN09T1
NCP300LSN18T1
NCP300LSN185T1
NCP300LSN20T1
NCP300LSN25T1
NCP300LSN27T1
NCP300LSN28T1
NCP300LSN30T1
NCP300LSN33T1
NCP300LSN34T1
NCP300LSN44T1
NCP300LSN45T1
NCP300LSN46T1
NCP300LSN47T1
0.882
1.764
1.813
1.960
2.45
0.9
1.8
1.85
2.0
2.5
2.7
2.8
3.0
3.3
3.4
4.4
4.5
4.6
4.7
0.918
1.836
1.887
2.040
2.55
0.027
0.054
0.056
0.060
0.075
0.081
0.084
0.090
0.099
0.102
0.132
0.135
0.138
0.141
0.045 0.063
0.090 0.126
0.093 0.130
0.100 0.140
0.125 0.175
0.135 0.189
0.140 0.196
0.150 0.210
0.165 0.231
0.170 0.238
0.220 0.308
0.225 0.315
0.230 0.322
0.235 0.329
0.20
0.23
0.45
0.48
0.05
0.5
2.0
0.25
0.25
0.50
0.50
2.646
2.744
2.940
3.234
3.332
4.312
4.410
4.508
4.606
2.754
2.856
3.060
3.366
3.468
4.488
4.590
4.692
4.794
0.33
0.34
0.52
0.53
4. Values shown apply at +25°C only. For voltage options greater than 1.1 V, V
limits over operating temperature range (−40°C to +125°C)
DET−
are V
3%. For voltage options < 1.2 V, V
is guaranteed only at +25°C.
NOM
DET−
5. Condition 1: 0.9 − 2.9 V, V = V
− 0.10 V; 3.0 − 3.9 V, V = V
− 0.13 V; 4.0 − 4.9 V, V = V
− 0.16 V
in
DET−
in
DET−
in
DET−
6. Condition 2: 0.9 − 4.9 V, V = V
+ 2.0 V
in
DET−
7. Condition 3: 0.9 − 4.9 V, V = 0.7 V, V
= 0.05 V, Active Low ‘L’ Suffix Devices
in
OUT
8. Condition 4: 0.9 − 1.0 V, V = 0.85 V, V
= 0.5 V; 1.1 − 1.5 V, V = 1.0 V, V
= 0.5 V; 1.6 − 4.9 V, V = 1.5 V, V
= 0.5 V,
in
OUT
in
OUT
in
OUT
Active Low ‘L’ Suffix Devices
9. Condition 5: 0.9 − 3.9 V, V = 4.5 V, V
= 2.4 V; 4.0 − 4.9 V, V = 8.0 V, V
= 5.9 V, Active Low ‘L’ Suffix Devices
in
OUT
in
OUT
Table 2. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
Detector Threshold
Supply Current
Pch Source Current
Nch Sink
Current
Hysteresis
V
Low
V
High
V
Low
V
in
High
(mA)
NCP300 Series
Detector Threshold
in
in
in
in
in
I
(mA)
I
(mA)
I
(mA)
I
(mA)
I
OUT
OUT
OUT
(Note 11) (Note 12) (Note 13) (Note 14)
(Note 15)
V
DET−
(V) (Note 10)
V
HYS
(V)
Min
Typ
Max
Min
Typ
Max
Typ
Typ
Typ
Typ
Typ
Part Number
NCP300HSN09T1
NCP300HSN18T1
NCP300HSN27T1
NCP300HSN30T1
NCP300HSN45T1
NCP300HSN47T1
0.882
1.764
2.646
2.940
4.410
4.606
0.9
1.8
2.7
3.0
4.5
4.7
0.918
1.836
2.754
3.060
4.590
4.794
0.027
0.054
0.081
0.090
0.135
0.141
0.045 0.063
0.090 0.126
0.135 0.189
0.150 0.210
0.225 0.315
0.235 0.329
0.20
0.23
0.25
0.45
0.48
0.50
2.5
0.04
0.08
0.33
0.34
0.52
0.53
10.Values shown apply at +25°C only. For voltage options greater than 1.1 V, V
limits over operating temperature range (−40°C to +125°C)
DET−
are V
3%. For voltage options < 1.2 V, V
is guaranteed only at +25°C.
NOM
DET−
11. Condition 1: 0.9 − 2.9 V, V = V
− 0.10 V; 3.0 − 3.9 V, V = V
− 0.13 V; 4.0 − 4.9 V, V = V
− 0.16 V
in
DET−
in
DET−
in
DET−
12.Condition 2: 0.9 − 4.9 V, V = V
+ 2.0 V
in
DET−
13.Condition 3: 0.9 − 1.4 V, V = 1.5 V, V
= 0.5 V; 1.5 − 4.9 V, V = 5.0 V, V
= 0.5 V, Active High ‘H’ Suffix Devices
in
OUT
OUT
OUT
in
OUT
14.Condition 4: 0.9 − 4.9 V, V = 0.7 V, V
= 0.4 V, Active High ‘H’ Suffix Devices
= GND; 1.1 − 1.5 V, V = 1.0 V, V
in
15.Condition 5: 0.9 − 1.0 V, V = 0.8 V, V
= GND; 1.6 − 4.9 V, V = 1.5 V, V
= GND,
in
in
OUT
in
OUT
Active High ‘H’ Suffix Devices
www.onsemi.com
9
NCP300, NCP301
Table 3. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
Supply Current
Nch Sink Current
Detector Threshold
Hysteresis
V
I
Low
V
in
High
V
Low
V
High
(mA)
NCP301 Series
Detector Threshold
in
in
in
I
(mA)
I
OUT
(mA)
I (mA)
in
OUT
in
(Note 19)
(Note 20)
(Note 16) (Note 18)
V
DET−
(V) (Note 16)
V
HYS
(V)
Min
Typ
Max
Min
Typ
Max
Typ
Typ
Typ
Typ
Part Number
NCP301LSN09T1
NCP301LSN12T1
NCP301LSN16T1
NCP301LSN18T1
NCP301LSN20T1
NCP301LSN22T1
NCP301LSN24T1
NCP301LSN25T1
NCP301LSN26T1
NCP301LSN27T1
NCP301LSN28T1
NCP301LSN30T1
NCP301LSN31T1
NCP301LSN32T1
NCP301LSN33T1
NCP301LSN34T1
NCP301LSN36T1
NCP301LSN40T1
NCP301LSN42T1
NCP301LSN45T1
NCP301LSN46T1
NCP301LSN47T1
0.882
1.176
1.568
1.764
1.960
2.156
2.352
2.450
2.548
2.646
2.744
2.940
3.038
3.136
3.234
3.332
3.528
3.920
4.116
4.410
4.508
4.606
0.9
1.2
1.6
1.8
2.0
2.2
2.4
2.5
2.6
2.7
2.8
3.0
3.1
3.2
3.3
3.4
3.6
4.0
4.2
4.5
4.6
4.7
0.918
1.224
1.632
1.836
2.040
2.244
2.448
2.550
2.652
2.754
2.856
3.060
3.162
3.264
3.366
3.468
3.672
4.080
4.284
4.590
4.692
4.794
0.027
0.036
0.048
0.054
0.060
0.066
0.072
0.075
0.078
0.081
0.084
0.090
0.093
0.096
0.099
0.102
0.108
0.120
0.126
0.135
0.138
0.141
0.045 0.063
0.060 0.084
0.20
0.45
0.05
0.5
0.080
0.112
2.0
0.090 0.126
0.100 0.140
0.23
0.25
0.48
0.50
0.110
0.154
0.120 0.168
0.125 0.175
0.130 0.182
0.135 0.189
0.140 0.196
0.150 0.210
0.155 0.217
0.160 0.224
0.165 0.231
0.170 0.238
0.180 0.252
0.200 0.280
0.210 0.294
0.225 0.315
0.230 0.322
0.235 0.329
0.33
0.34
0.52
0.53
16.Values shown apply at +25°C only. For voltage options greater than 1.1 V, V
limits over operating temperature range (−40°C to +125°C)
DET−
are V
3%. For voltage options < 1.2 V, V
is guaranteed only at +25°C.
NOM
DET−
17.Condition 1: 0.9 − 2.9 V, V = V
− 0.10 V; 3.0 − 3.9 V, V = V
− 0.13 V; 4.0 − 4.9 V, V = V
− 0.16 V
in
DET−
in
DET−
in
DET−
18.Condition 2: 0.9 − 4.9 V, V = V
+ 2.0 V
in
DET−
19.Condition 3: 0.9 − 4.9 V, V = 0.7 V, V
= 0.05 V, Active Low ‘L’ Suffix Devices
in
OUT
20.Condition 4: 0.9 − 1.0 V, V = 0.85 V, V
= 0.5 V; 1.1 − 1.5 V, V = 1.0 V, V
= 0.5 V; 1.6 − 4.9 V, V = 1.5 V, V
= 0.5 V,
in
OUT
in
OUT
in
OUT
Condition 4: Active Low ‘L’ Suffix Devices
Table 4. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
Supply Current
Detector Threshold
Hysteresis
Nch
Sink Current
V
Low
V
High
NCP301 Series
Detector Threshold
in
in
in
in
I
(mA)
I
(mA)
I
(mA)
OUT
(Note 22)
(Note 23)
(Note 24)
V
DET−
(V) (Note 21)
V
HYS
(V)
Min
Typ
Max
Min
Typ
Max
Typ
Typ
Typ
Part Number
NCP301HSN09T1
0.882
1.764
2.156
2.646
2.940
4.410
0.9
1.8
2.2
2.7
3.0
4.5
0.918
1.836
2.244
2.754
3.060
4.590
0.027
0.054
0.066
0.081
0.090
0.135
0.045
0.090
0.110
0.135
0.150
0.225
0.063
0.126
0.154
0.189
0.210
0.315
0.20
0.45
2.5
NCP301HSN18T1
NCP301HSN22T1
NCP301HSN27T1
NCP301HSN30T1
NCP301HSN45T1
0.25
0.33
0.50
0.52
21.Values shown apply at +25°C only. For voltage options greater than 1.1 V, V
limits over operating temperature range (−40°C to
DET−
+125°C) are V
3%. For voltage options < 1.2 V, V
is guaranteed only at +25°C.
NOM
DET−
22.Condition 1: 0.9 − 2.9 V, V = V
− 0.10 V; 3.0 − 3.9 V, V = V
− 0.13 V; 4.0 − 4.9 V, V = V
− 0.16 V
in
DET−
in
DET−
in
DET−
23.Condition 2: 0.9 − 4.9 V, V = V
+ 2.0 V
in
DET−
24.Condition 3: 0.9 − 1.4 V, V = 1.5 V, V
= 0.5 V; 1.5 − 4.9 V, V = 5.0 V, V
= 0.5 V, Active High ‘H’ Suffix Devices
in
OUT
in
OUT
www.onsemi.com
10
NCP300, NCP301
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
10.5
2.5
2.0
1.5
T = 25°C
T = 25°C
A
A
1.0
0.5
0
0
0
2.0
4.0
6.0
8.0
10
12
0
4.0
6.0
10
12
2.0
8.0
V , INPUT VOLTAGE (V)
in
V , INPUT VOLTAGE (V)
in
Figure 3. NCP300/1 Series 0.9 V
Input Current versus Input Voltage
Figure 4. NCP300/1 Series 2.7 V
Input Current versus Input Voltage
17.2
1.00
T = 25°C
A
2.5
2.0
1.5
0.95
0.90
V
DET+
V
DET−
1.0
0.5
0
0.85
0.80
0
2.0
4.0
6.0
8.0
10
12
−50
0
75
−25
25
50
100
V , INPUT VOLTAGE (V)
in
T , AMBIENT TEMPERATURE (°C)
A
Figure 6. NCP300/1 Series 0.9 V
Detector Threshold Voltage versus Temperature
Figure 5. NCP300/1 Series 4.5 V
Input Current versus Input Voltage
2.90
2.85
2.80
2.75
2.70
2.65
2.60
4.9
4.8
4.7
4.6
4.5
V
DET+
V
DET+
V
DET−
V
DET−
4.4
4.3
−50
0
75
−50
0
75
−25
25
50
100
125
−25
25
50
100
125
T , AMBIENT TEMPERATURE (°C)
A
T , AMBIENT TEMPERATURE (°C)
A
Figure 8. NCP300/1 Series 4.5 V
Detector Threshold Voltage versus Temperature
Figure 7. NCP300/1 Series 2.7 V
Detector Threshold Voltage versus Temperature
www.onsemi.com
11
NCP300, NCP301
1.0
0.8
0.6
0.4
3.5
3.0
2.5
2.0
1.5
T = −40°C (301L only)
A
T = 125°C (301L only)
A
1.0
0.5
0
T = 25°C (301L only)
A
T = −40°C (301L only)
A
0.2
0
T = 25°C (301L only)
A
0
0.4
V , INPUT VOLTAGE (V)
0.8
1.0
0
0.2
0.6
0.5
1.5
2.5
3.0
3.5
1.0
2.0
V , INPUT VOLTAGE (V)
in
in
Figure 9. NCP300L/1L Series 0.9 V
Reset Output Voltage versus Input Voltage
Figure 10. NCP300L/1L Series 2.7 V
Reset Output Voltage versus Input Voltage
6.0
5.0
4.0
3.0
2.0
1.0
0
1.6
1.4
V
OUT
= 0.5 V
T = −40°C
A
1.2
1.0
0.8
0.6
0.4
0.2
0
T = −40°C (301L only)
A
T = 25°C
A
T = 25°C (301L only)
A
T = 85°C
A
0
2.0
4.0
5.0
6.0
1.0
3.0
0
0.4
1.0
0.2
0.6
0.8
V , INPUT VOLTAGE (V)
in
V , INPUT VOLTAGE (V)
in
Figure 11. NCP300L/1L Series 4.5 V
Reset Output Voltage versus Input Voltage
Figure 12. NCP300H/1L Series 0.9 V
Reset Output Sink Current versus Input Voltage
12
10
20
15
10
5.0
0
V
OUT
= 0.5 V
V
OUT
= 0.5 V
T = −40°C
A
T = −40°C
A
8.0
6.0
4.0
2.0
0
T = 25°C
A
T = 25°C
A
T = 125°C
A
T = 125°C
A
0
1.0
V , INPUT VOLTAGE (V)
2.5
0.5
1.5
2.0
3.0
0
2.0
V , INPUT VOLTAGE (V)
5.0
1.0
3.0
4.0
in
in
Figure 13. NCP300H/1L Series 2.7 V
Reset Output Sink Current versus Input Voltage
Figure 14. NCP300H/1L Series 4.5 V
Reset Output Sink Current versus Input Voltage
www.onsemi.com
12
NCP300, NCP301
20
15
10
5.0
0
20
V
= V −2.1 V
V
= V −2.1 V
in
T = 25°C
T = 25°C
OUT
in
OUT
A
A
15
V
−1.5 V
in
in
V
−1.0 V
−0.5 V
V
in
−1.5 V
10
5.0
0
V
in
−1.0 V
V
in
V
in
−0.5 V
0
8.0
0
2.0
4.0
V , INPUT VOLTAGE (V)
6.0
8.0
10
2.0
4.0
6.0
10
V , INPUT VOLTAGE (V)
in
in
Figure 15. NCP300L Series 0.9 V
Reset Output Source Current versus Input Voltage
Figure 16. NCP300L Series 2.7 V
Reset Output Source Current versus Input Voltage
20
1.5
T = 25°C
A
V
OUT
= V −2.1 V
in
T = 25°C
A
15
10
1.0
V
in
= 0.85 V
V
V
−1.5 V
−1.0 V
in
in
0.5
0
V
in
= 0.7 V
5.0
0
V
in
−0.5 V
0
4.0
8.0
2.0
6.0
10
0
0.4
, OUTPUT VOLTAGE (V)
1.0
0.2
0.6
0.8
V , INPUT VOLTAGE (V)
V
OUT
in
Figure 17. NCP300L Series 4.5 V
Reset Output Source Current versus Input Voltage
Figure 18. NCP300H/1L Series 0.9 V
Reset Output Sink Current versus Output Voltage
15
35
T = 25°C
A
T = 25°C
A
V
in
= 2.5 V
30
25
20
15
10
5.0
0
V
= 4.0 V
in
10
V
= 3.5 V
in
V
= 2.0 V
in
V
= 3.0 V
in
V
= 2.5 V
5.0
0
in
V
in
= 1.5 V
1.0
V
= 2.0 V
in
V
in
= 1.5 V
0
1.0
2.0
3.0
4.0
0
2.5
0.5
1.5
2.0
V , OUTPUT VOLTAGE (V)
OUT
V , OUTPUT VOLTAGE (V)
OUT
Figure 19. NCP300H/1L Series 2.7 V
Reset Output Sink Current versus Output Voltage
Figure 20. NCP300H/1L Series 4.5 V
Reset Output Sink Current versus Output Voltage
www.onsemi.com
13
NCP300, NCP301
OPERATING DESCRIPTION
high state for active high devices. After completion of the
power interruption, V will again return to its nominal level
The NCP300 and NCP301 series devices are second
generation ultra−low current voltage detectors. Figures 20
and 21 show a timing diagram and a typical application.
in
and become greater than the V
. The voltage detector
DET+
has built−in hysteresis to prevent erratic reset operation as
the comparator threshold is crossed.
Initially consider that input voltage V is at a nominal level
in
and it is greater than the voltage detector upper threshold
Although these device series are specifically designed for
use as reset controllers in portable microprocessor based
systems, they offer a cost−effective solution in numerous
applications where precise voltage monitoring is required.
Figure 26 through Figure 33 shows various application
examples.
(V
), and the reset output (Pin 1) will be in the high state
DET+
for active low devices, or in the low state for active high
devices. If there is a power interruption and V becomes
in
significantly deficient, it will fall below the lower detector
threshold (V ). This sequence of events causes the Reset
DET−
output to be in the low state for active low devices, or in the
V
in
Input Voltage, Pin 2
V
+
DET
V
DET−
V
in
Reset Output (Active Low), Pin 1
V
+
DET
V
DET−
0 V
V
in
Reset Output (Active High), Pin 1
V
+
DET
V
DET−
0 V
Figure 21. Timing Waveforms
www.onsemi.com
14
NCP300, NCP301
V
TRANSIENT REJECTION
FACTORS TO BE CONSIDERED FOR VOLTAGE
OPTION SELECTION
CC
The NCP300 and NCP301 series provides accurate V
CC
monitoring and reset timing during power−up,
power−down, and brownout/sag conditions, and rejects
negative glitches on the power supply line. Figure 22 shows
the maximum transient duration vs. maximum negative
excursion (overdrive) for glitch rejection. Any combination
of duration and overdrive which lies under the curve will not
The following hysteresis graph depicts V
DET−_min/max
and V
for an active low Reset device:
DET+_min/max
Output
V
DET−_typ
generate a reset signal. A below−V condition (on the
CC
right) is detected as a brownout or power−down. Typically,
any transient that goes 100 mV below the reset threshold and
lasts 5.0 ms or less will not cause a reset pulse.
V
V
V
V
DET+_max
DET−_min
DET−_max
DET+_min
Transient immunity can be improved by adding a
capacitor in close proximity to the V pin of the NCP30x.
CC
Input
V
V
CC
V
= V
+ V
DET−_min HYS_min
DET+_min
V
= V
DET−_max
+ V
HYS_max
DET+_max
TH
Overdrive
Figure 24.
For selecting a voltage option in the NCP30X family,
three major factors should be considered:
Duration
1. V
: Maximum detector threshold voltage
DET+_max
Figure 22. Max Transient Duration vs. Max Overdrive
for increasing V for the NCP30X device.
in
2. V
: Minimum voltage output of the power
in_min
supply. This is also the input voltage to the
NCP30X device.
300
250
3. V
: Minimum power supply voltage
CC_min
specification for the device that is protected by the
NCP30X.
200
The V
for an NCP30X device is normally
DET+_max
V
= 4.90 V
TH
calculated as follows:
150
100
V
= 3.10 V
TH
VDET+_max + VDET−_max ) VHYS_max
(eq. 1)
V
TH
= 1.60 V
Where:
V
= Maximum detector threshold voltage for
DET−_max
50
0
decreasing Vin
= Maximum detector threshold hysteresis
V
HYS_max
The above two parameters can be obtained directly from
10
30
50
70
90
110
130
150
the data sheet to figure out the V
.
RESET COMPARATOR OVERDRIVE
DET+_max
In the NCP30X family, for a given V
, which is the
DET−_typ
Figure 23.
typical detection voltage reflected in the part number, the
threshold values are designed to the following targets (at
25°C):
VDET−_min + VDET−_typ * 2%
VDET−_max + VDET−_typ ) 2%
VHYS_typ + 5% of VDET−_typ
VHYS_min + VHYS_typ * 40%
VHYS_max + VHYS_typ ) 40%
(eq. 2)
(eq. 3)
(eq. 4)
(eq. 5)
(eq. 6)
By simple mathematical calculation, combining
Equations 2 to 6, Equation 1 becomes:
VDET+_max + VDET−_typ 1.09
(eq. 7)
www.onsemi.com
15
NCP300, NCP301
So, V
can be easily figured out just using a single
PROPAGATION DELAY VARIATION
DET+_max
variable V
.
On the other hand (see above paragraph), a minimum
DET−_typ
overdrive value from V
to V must be respected.
threshold
CC
For example, for NCP300LSN18T1G V
then
= 1.8 V;
DET−_typ
That means V (minimum value of V ) must be higher
in
CC
enough than V
(V
+ hysteresis) at the risk of
DET+
DET−
VDET+_max + 1.8 1.09 + 1.962 V
(eq. 8)
significantly increasing propagation delay. (Figure 25) This
propagation delay is temperature sensitive.
To avoid acceptable time response, a minimum 100 mV
The NCP30X detection voltage option must be chosen such
that:
difference between V and V
must be selected.
in
DET+
VCC_min t VDET+_max t Vin_min
(eq. 9)
+
V
The significance of V
< V
is that it makes
CC_min
DET+_max
DET
sure the the reset from NCP30X remains asserted (in RESET
hold state) till after the power supply exceeds the V
600
500
CC_min
requirement; this prevents incorrect device (uP) initiation.
Having V < V makes sure that the
DET+_max
in_min
NCP30X is able to start up when V is at the V
.
in
in_min
400
300
The theoretical ideal V
voltage option to be
, can be given by the
DET−_typ
selected by the user, V
following formula:
DET−_typ_ideal
t
pLH
200
ǒV
Ǔ
in_min ) VCC_min
(eq. 10)
VDET−_typ_ideal
+
t
pHL
(
)
2 1.09
100
0
The following example shows how to select the device
voltage option in a real world application.
1. Power supply output specification: 3.3 V $3%
2. Microprocessor core voltage specification: 3.3 V
$5%
3.0
3.5
4.0
4.5
5.0
5.5
3.168
V , PULSE HIGH INPUT VOLTAGE (V)
in
Figure 25. tpLH and tpHL vs. Input Voltage
for the NCP301SNT1
So, we have:
Vin_min + 3.3 V * 3% + 3.201 V
(eq. 11)
(eq. 12)
VCC_min + 3.3 V * 5% + 3.135 V
Then the ideal voltage option = (3.201 + 3.135) / (2 * 1.09)
= 2.9064 V
Therefore, a device voltage option of 2.9 V will be the right
choice.
www.onsemi.com
16
NCP300, NCP301
APPLICATION CIRCUIT INFORMATION
V
DD
V
DD
2
Input
*
1
NCP300
Series
Microprocessor
Reset
Reset Output
* Required for
NCP301
3
GND
GND
Figure 26. Microprocessor Reset Circuit
2.85 V
2.70 V
V
in
< 2.7 ON
2
Input
1
NCP300
LSN27T1
To Additional Circuitry
Reset Output
V
in
> 2.835 ON
3
GND
Figure 27. Battery Charge Indicator
V
supply
Fault
10 V
Active High
Device Thresholds
2
Input
UV
NCP301
LSN23T1
1
Active Low
Device Thresholds
Reset Output
1.0 V
UV
OV
OV
UV
OK
OK
Fault
Fault
Fault
Fault
3
GND
Input
2
Input
The above circuit combines an active high and an active low reset output device to form
a window detector for monitoring battery or power supply voltages. When the input
voltage falls outside of the window established by the upper and lower device
thresholds, the LED will turn on indicating a fault. As the input voltage falls within the
window, increasing from 1.0 V and exceeding the active low device’s hysteresis
threshold, or decreasing from the peak towards 1.0 V and falling below the active high
device’s undervoltage threshold, the LED will turn off. The device thresholds shown can
be used for a single cell lithium−ion battery charge detector.
OV
NCP301
HSN43T1
Output
1
Reset Output
3
GND
Figure 28. Window Voltage Detector
www.onsemi.com
17
NCP300, NCP301
APPLICATION CIRCUIT INFORMATION
V
supply
5.0 V
2
Input
1
NCP301
LSN45T1
Reset Output
3
2
GND
3.3 V
Input
1
NCP301
LSN30T1
Low state output if either power
supply is below the respective
undervoltage detector threshold
but greater than 1.0 V.
Reset Output
3
GND
Figure 29. Dual Power Supply Undervoltage Supervision
V
DD
R
H
V
DD
Input
2
R
L
1
NCP301
Microprocessor
LSN27T1
Reset
Reset Output
GND
3
GND
Figure 30. Microprocessor Reset Circuit with Additional Hysteresis
Comparator hysteresis can be increased with the addition of
Test Data
resistor R . The hysteresis equations have been simplified and
H
V
th
Decreasing
(V)
V
th
Increasing
(V)
V
(V)
R
(W)
R
L
(kW)
do not account for the change of input current I as V crosses
HYS
H
in
in
the comparator threshold. The internal resistance, R is simply
in
calculated using I = 0.26 mA at 2.6 V.
in
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.84
2.87
2.88
2.91
2.90
2.94
2.98
2.97
3.04
3.15
0.135
0.17
0.18
0.21
0.20
0.24
0.28
0.27
0.34
0.45
0
−
10
V Decreasing:
in
100
100
100
220
220
220
470
470
470
6.8
4.3
10
6.8
4.3
10
RH
Rin
ǒ
Ǔ
+ ǒ Ǔ
Vth
) 1 VDET*
V Increasing:
in
RH
6.8
4.3
ǒ
Ǔ
+ ǒ Ǔ V
Vth
) 1
DET* ) VHYS
Rin ø RL
V
HYS
= V Increasing − V Decreasing
in in
www.onsemi.com
18
NCP300, NCP301
5.0 V
Test Data
R2 = 82 kW
(kHz)
R2 = 8.2 kW
R1 = 100 kW
C (nF)
0.01
0.068
1.0
f
I
Q
(mA)
18
f
(kHz)
I
Q
(mA)
30
OSC
OSC
10.4
6.0
9.8
6.18
1.41
0.27
0.045
18
5.7
3.6
30
Input
2
R2 (See table)
21
29
1
10
21
1.34
0.356
0.077
25
NCP300
HSN27T1
C
Reset Output
100
22
22
23
22
1000
3
GND
Table values are for information only.
Figure 31. Simple Clock Oscillator
V
supply
This circuit monitors the current at the load. As
current flows through the load, a voltage drop with
respect to ground appears across R where
Load
sense
V
DD
V
sense
= I
load
* R The following conditions apply:
sense.
If:
I
Then:
Reset Output = 0 V
Reset Output = V
DD
Input
2
t V
w (V
/R
Load
DET− sense
R
sense
50 k
I
+V
DET−
)/R
Load
HYS
sense
1
NCP301
LSN09T1
Microcontroller
Reset Output
GND
GND
3
Figure 32. Microcontroller System Load Sensing
www.onsemi.com
19
NCP300, NCP301
V
supply
2
Input
1
NCP301
LSN45T1
Reset
Output
3
GND
Input
2
1
NCP301
LSN27T1
Reset
Output
GND
3
V
in
= 1.0 V to 10 V
2
Input
1
NCP301
LSN18T1
Reset
Output
3
GND
A simple voltage monitor can be constructed by connecting several voltage detectors as shown above. Each LED will
sequentially turn on when the respective voltage detector threshold (V +V ) is exceeded. Note that detector
DET−
HYS
thresholds (V ) that range from 0.9 V to 4.9 V in 100 mV steps can be manufactured.
DET−
Figure 33. LED Bar Graph Voltage Monitor
www.onsemi.com
20
NCP300, NCP301
ORDERING INFORMATION
†
Device
Threshold Voltage
Output Type
Reset
Marking
Package
Shipping
NCP300LSN09T1G
0.9
SEJ
SFK
SRA
TSOP−5
(Pb−Free)
NCP300LSN18T1G
NCP300LSN185T1G
1.8
TSOP−5
(Pb−Free)
1.85
2.0
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
NCP300LSN20T1G
NCV300LSN20T1G*
NCP300LSN25T1G
SHE
SIM
2.5
2.7
TSOP−5
(Pb−Free)
RUM
TSOP−5
(Pb−Free)
NCP300LSN27T1G
NCV300LSN27T1G*
NCP300LSN28T1G
NCV300LSN28T1G*
NCP300LSN30T1G
NCV300LSN30T1G*
NCP300LSN33T1G
SEE
SIW
SED
SSL
SEC
SQV
SKV
2.8
3.0
3.3
TSOP−5
(Pb−Free)
Active
Low
3000 / Tape & Reel
(7 in. Reel)
CMOS
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
NCP300LSN34T1G
NCV300LSN36T1G*
NCP300LSN44T1G
3.4
3.6
4.4
SKU
SKS
SKK
TSOP−5
(Pb−Free)
NCP300LSN45T1G
NCP300LSN46T1G
NCP300LSN47T1G
NCP300HSN09T1G
NCP300HSN18T1G
NCP300HSN27T1G
NCP300HSN30T1G
NCP300HSN45T1G
NCP300HSN47T1G
4.5
4.6
4.7
0.9
1.8
2.7
3.0
4.5
4.7
SEA
SKJ
SDZ
SDY
SFJ
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
SDU
SDS
SDQ
SDP
TSOP−5
(Pb−Free)
Active
High
3000 / Tape & Reel
(7 in. Reel)
CMOS
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices,
ranging from 0.9 V to 4.9 V in 100 mV increments and NCP300/NCP301 active high output devices, ranging from 0.9 V to 4.9 V
in 100 mV increments can be manufactured. Contact your ON Semiconductor representative for availability. The electrical
characteristics of these additional devices are shown in Tables 1 through 4.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
NCVxxx: T = −40°C, T
= +125°C. Guaranteed by design.
low
high
www.onsemi.com
21
NCP300, NCP301
ORDERING INFORMATION
†
Device
Threshold Voltage
Output Type
Reset
Marking
Package
Shipping
NCP301LSN09T1G
0.9
SFF
SNN
SRK
TSOP−5
(Pb−Free)
1.2
NCP301LSN12T1G
TSOP−5
(Pb−Free)
NCV301LSN12T1*
NCV301LSN12T1G*
TSOP−5
TSOP−5
(Pb−Free)
1.6
1.8
NCP301LSN16T1G
SNJ
SRL
TSOP−5
(Pb−Free)
NCV301LSN16T1*
NCV301LSN16T1G*
TSOP−5
TSOP−5
(Pb−Free)
NCP301LSN18T1G
NCP301LSN18T2G
SFN
DT2
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
2.0
2.2
TSOP−5
(Pb−Free)
NCP301LSN20T1G
NCV301LSN20T1G*
NCP301LSN22T1G
SFD
SRM
SNG
TSOP−5
(Pb−Free)
SUA
NCV301LSN22T1*
NCV301LSN22T1G*
TSOP−5
TSOP−5
(Pb−Free)
NCP301LSN24T1G
NCP301LSN25T1G
NCP301LSN25T2G
NCV301LSN25T1G*
NCP301LSN26T1G
NCP301LSN27T1G
NCP301LSN27T2G
NCP301LSN28T1G
NCV301LSN28T1G*
NCP301LSN30T1G
NCP301LSN30T2G
NCV301LSN30T1G*
NCP301LSN31T1G
NCP301LSN32T1G
2.4
2.5
TAN
SNF
ET2
SRN
SNE
SFA
FT2
TSOP−5
(Pb−Free)
Open
Drain
Active
Low
3000 / Tape & Reel
(7 in. Reel)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
2.6
2.7
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
2.8
3.0
SEZ
SRO
SEY
GT2
AJA
SEW
SNC
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
3.1
3.2
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices,
ranging from 0.9 V to 4.9 V in 100 mV increments and NCP300/NCP301 active high output devices, ranging from 0.9 V to 4.9 V
in 100 mV increments can be manufactured. Contact your ON Semiconductor representative for availability. The electrical
characteristics of these additional devices are shown in Tables 1 through 4.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
NCVxxx: T = −40°C, T
= +125°C. Guaranteed by design.
low
high
www.onsemi.com
22
NCP300, NCP301
ORDERING INFORMATION
†
Device
Threshold Voltage
Output Type
Reset
Marking
Package
Shipping
3.3
NCP301LSN33T1G
SNB
TSOP−5
(Pb−Free)
NCV301LSN33T1G*
ACG
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
NCP301LSN34T1G
NCP301LSN36T1G
NCP301LSN39T1G
NCP301LSN40T1G
3.4
3.6
3.9
4.0
SNA
SMY
SNA
SMU
TSOP−5
(Pb−Free)
SRP
NCV301LSN40T1*
NCV301LSN40T1G*
TSOP−5
Open
Drain
Active
Low
3000 / Tape & Reel
(7 in. Reel)
TSOP−5
(Pb−Free)
4.2
4.5
TSOP−5
(Pb−Free)
NCP301LSN42T1G
NCV301LSN42T1G*
NCP301LSN45T1G
NCV301LSN45T1G*
NCP301LSN46T1G
SMS
ACR
SEV
SRQ
SMP
TSOP−5
(Pb−Free)
4.6
4.7
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
NCP301LSN47T1G
NCV301LSN47T1G*
SEU
SSJ
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices,
ranging from 0.9 V to 4.9 V in 100 mV increments and NCP300/NCP301 active high output devices, ranging from 0.9 V to 4.9 V
in 100 mV increments can be manufactured. Contact your ON Semiconductor representative for availability. The electrical
characteristics of these additional devices are shown in Tables 1 through 4.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
NCVxxx: T = −40°C, T
= +125°C. Guaranteed by design.
low
high
www.onsemi.com
23
NCP300, NCP301
ORDERING INFORMATION
†
Device
Threshold Voltage
Output Type
Reset
Marking
Package
Shipping
NCP301HSN09T1G
0.9
1.8
2.2
2.7
SET
SFM
SMD
TSOP−5
(Pb−Free)
NCP301HSN18T1G
NCP301HSN22T1G
TSOP−5
(Pb−Free)
TSOP−5
(Pb−Free)
Open
Drain
Active
High
3000 / Tape & Reel
(7 in. Reel)
NCP301HSN27T1G
NCV301HSN27T1G*
NCP301HSN30T1G
SEP
SUD
SEN
TSOP−5
(Pb−Free)
3.0
4.5
TSOP−5
(Pb−Free)
NCP301HSN45T1G
SEL
TSOP−5
(Pb−Free)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices,
ranging from 0.9 V to 4.9 V in 100 mV increments and NCP300/NCP301 active high output devices, ranging from 0.9 V to 4.9 V
in 100 mV increments can be manufactured. Contact your ON Semiconductor representative for availability. The electrical
characteristics of these additional devices are shown in Tables 1 through 4.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
NCVxxx: T = −40°C, T
= +125°C. Guaranteed by design.
low
high
www.onsemi.com
24
NCP300, NCP301
PACKAGE DIMENSIONS
TSOP−5
(SOT−23−5/SC59−5)
CASE 483
ISSUE M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
NOTE 5
5X
D
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE
MINIMUM THICKNESS OF BASE MATERIAL.
4. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR GATE BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT
EXCEED 0.15 PER SIDE. DIMENSION A.
5. OPTIONAL CONSTRUCTION: AN ADDITIONAL
TRIMMED LEAD IS ALLOWED IN THIS LOCATION.
TRIMMED LEAD NOT TO EXTEND MORE THAN 0.2
FROM BODY.
0.20 C A B
2X
0.10
T
M
5
4
3
2X
0.20
T
B
S
1
2
K
B
A
DETAIL Z
G
A
MILLIMETERS
TOP VIEW
DIM
A
B
C
D
G
H
J
K
M
S
MIN
2.85
1.35
0.90
0.25
MAX
3.15
1.65
1.10
0.50
DETAIL Z
J
0.95 BSC
C
0.01
0.10
0.20
0
0.10
0.26
0.60
0.05
H
SEATING
PLANE
END VIEW
C
10
3.00
_
_
SIDE VIEW
2.50
SOLDERING FOOTPRINT*
1.9
0.074
0.95
0.037
2.4
0.094
1.0
0.039
0.7
0.028
mm
inches
ǒ
Ǔ
SCALE 10:1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
NCP300/D
相关型号:
NCP301LSN24T1G
Voltage Detector Series with Open Drain N-Channel Output 2.4 V, Reset Low, TSOP-5, 3000-REEL
ONSEMI
©2020 ICPDF网 联系我们和版权申明