FSAV331MTCX 概述
双通道4:1视频开关 模拟开关芯片 复用器或开关
FSAV331MTCX 规格参数
是否无铅: | 不含铅 | 生命周期: | End Of Life |
包装说明: | TSSOP, TSSOP16,.25 | Reach Compliance Code: | compliant |
ECCN代码: | EAR99 | HTS代码: | 8542.39.00.01 |
Factory Lead Time: | 1 week | 风险等级: | 6.29 |
模拟集成电路 - 其他类型: | VIDEO MULTIPLEXER | JESD-30 代码: | R-PDSO-G16 |
JESD-609代码: | e4 | 长度: | 5 mm |
湿度敏感等级: | 1 | 信道数量: | 1 |
功能数量: | 2 | 端子数量: | 16 |
标称断态隔离度: | 56 dB | 最大通态电阻 (Ron): | 10 Ω |
最高工作温度: | 85 °C | 最低工作温度: | -40 °C |
输出: | SEPARATE OUTPUT | 封装主体材料: | PLASTIC/EPOXY |
封装代码: | TSSOP | 封装等效代码: | TSSOP16,.25 |
封装形状: | RECTANGULAR | 封装形式: | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
峰值回流温度(摄氏度): | NOT SPECIFIED | 电源: | 5 V |
认证状态: | Not Qualified | 座面最大高度: | 1.1 mm |
子类别: | Multiplexer or Switches | 最大供电电压 (Vsup): | 5.25 V |
最小供电电压 (Vsup): | 4.75 V | 标称供电电压 (Vsup): | 5 V |
表面贴装: | YES | 最长断开时间: | 5.8 ns |
最长接通时间: | 5.3 ns | 切换: | MAKE-BEFORE-BREAK |
技术: | CMOS | 温度等级: | INDUSTRIAL |
端子面层: | Nickel/Palladium/Gold (Ni/Pd/Au) | 端子形式: | GULL WING |
端子节距: | 0.65 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 宽度: | 4.4 mm |
Base Number Matches: | 1 |
FSAV331MTCX 数据手册
通过下载FSAV331MTCX数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
October 2010
FSAV331 — Dual-Channel, 4:1 Video Switch
Features
Description
The Fairchild video switch FSAV331 is a dual 4:1 high
speed video switch which can be configured as either
multiplexer or demultiplexer. Low on-resistance allows
inputs to be connected to outputs without adding
propagation delay or generating additional ground
bounce noise.
Wide Bandwidth: 300MHz
-73dB Non-Adjacent Channel Crosstalk at 10MHz
-56dB Off Isolation at 10MHz
On Resistance: 3Ω (Typical)
Low Power Consumption: 3µA (Maximum)
Control Inputs Compatible with TTL Level
When the OE Pin is LOW, S0 and S1 connect the A Port
to the selected B Port output. When the OE Pin is
HIGH, the switch is OPEN and a HIGH-Impedance state
exists between the two ports.
Applications
Y/C Video or CVBS Video Switch in LCD, Plasma,
and Projector Displays
Ordering Information
Operating
Temperature Range
Packing
Part Number
Package
Method
16-Lead, Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide
FSAV331MTCX
-40 to +85°C
Tape and Reel
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
Pin Configurations
Figure 1. Logic Diagram
Figure 2. Pin Assignments
Pin Descriptions
Pin #
1, 15
Name
/OE1, /OE2
S1, S0
Description
Port Enable
2, 14
Select Input
3, 4, 5, 6
7, 9
1B4, 1B3, 1B2, 1B1
1A, 2A
B-Ports (Channel 1)
A-Ports
8
GND
Ground
10, 11, 12, 13
16
2B1, 2B2, 2B3, 2B4
VCC
B-Ports (Channel 2)
Supply Voltage
Truth Table
S1
Don’t Care
Don’t Care
LOW
S0
Don’t Care
Don’t Care
LOW
/OE1
HIGH
/OE2
Don’t Care
HIGH
Function
Disconnect 1A
Disconnect 2A
A=B1
Don’t Care
LOW
LOW
LOW
HIGH
LOW
LOW
A=B2
HIGH
LOW
LOW
LOW
A=B3
HIGH
HIGH
LOW
LOW
A=B4
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
2
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
VCC
Parameter
Min.
-0.5
-0.5
-0.5
-50
Max.
+7.0
Unit
V
Supply Voltage
VS
DC Switch Voltage
DC Input Voltage(1)
VCC+0.5
+7.0
V
VIN
V
IIK
DC Input Diode Current
mA
mA
°C
V
IOUT
TSTG
ESD
DC Output Current
128
+150
2000
Storage Temperature Range
Human Body Model, JESD22-A114
-65
Note:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are
observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
VCC
Parameter
Min.
4.75
0
Max.
5.25
VCC
Unit
V
Power Supply
VIN
Control Input Voltage
V
VSW
TA
Switch Input Voltage
0
VCC
V
Operating Temperature, Free Air
Thermal Resistance
-40
+85
100
°C
°C/W
ΘJA
Note:
2. Unused control inputs must be held HIGH or LOW; they may not float.
DC Electrical Characteristics
Typical values are at VCC=5.0V and TA= +25°C.
TA= -40 to +85°C
Min. Typ. Max.
Symbol
Parameter
Conditions
VCC (V)
Units
VANALOG Analog Signal Range
4.75 to 5.25
4.75
0
2
V
V
VIK
VIH
VIL
IIN
Clamp Diode Voltage
IIN=-18mA
-1.2
High-Level Input Voltage
Low-Level Input Voltage
Control Input Leakage
Off-State Leakage Current
4.75 to 5.25
4.75 to 5.25
5.25
2.0
V
0.8
±1.0
±1.0
7
V
VIN=0V to VCC
µA
µA
IOZ
5.25
0 ≤ A, B ≤ VCC
VIN=1.0V, ION=13mA
VIN=2.0V, ION=26mA
VIN=0V or VCC, IOUT=0
4.75
3
5
RON
ICC
Switch On Resistance(3)
Quiescent Supply Current
Ω
4.75
10
5.25
3
µA
Note:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the A or B pins.
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
3
AC Electrical Characteristics
Typical values are at TA=+25°C and VCC=5.0V
TA= -40 to +85°C
Symbol
Parameter
Conditions
VCC (V)
Units Figure
Min.
Typ.
Max.
Turn On Time; S to B
1.0
1.0
1.0
5.3
5.3
5.8
VI=7V for tPZL
VI=Open for tPZH
Figure 3,
ns
tON
4.75 to 5.25
Figure 4
Output Enable Time
OE to A or B
Turn Off Time; S to B
VI=7V for tPLZ
VI=Open for tPHZ
Figure 3,
ns
tOFF
4.75 to 5.25
4.75 to 5.25
Figure 4
Output Disable Time
OE to A or B
1.0
5.5
Propagation Delay(4)
Select to A Delay
0.1
5.0
tPLH, tPHL
VI=Open
ns
RL=150Ω,
DG
DP
Differential Gain(5)
Differential Phase(5)
4.75 to 5.25
4.75 to 5.25
4.75 to 5.25
0.26
0.23
-56.0
%
°
f=3.58MHz
RL=150Ω,
f=3.58MHz
Non Adjacent
Off Isolation
RL=150Ω,
f=10MHz
OIRR
XTALK
dB
dB
Figure 5
Figure 6
Non Adjacent
RL=150Ω,
f=10MHz
4.75 to 5.25
4.75 to 5.25
-73.0
300
Channel Crosstalk(5)
BW
-3dB Bandwidth(5)
MHz Figure 7
RL=50Ω
Note:
4. This parameter is guaranteed by design.
5. This parameter is guaranteed by device characterization, not production tested.
Capacitance
Typical values are at TA=+25°C.
Symbol
CIN
Parameter
Control Pin Input Capacitance
A/B On Capacitance
Conditions
VCC=5.0V
Typ.
Units
pF
2
39
13
5
CON
VCC=5.0V, /OE=0V
pF
A Port
COFF
Off Capacitance
VCC, /OE=5.0V
pF
B Port
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
4
AC Loadings and Waveforms
Notes:
6. Input drive by 50Ω source terminated in 50Ω.
7. CL includes load and stray capacitance.
8. Input PRR=1.0MHz, tW=500ns.
Figure 3. AC Test Circuit
Figure 4. AC Waveforms
Figure 5. Off Isolation
Figure 6. Crosstalk
Figure 7. Bandwidth
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
5
Physical Dimensions
5.00±0.10
4.55
5.90
4.45 7.35
0.65
4.4±0.1
1.45
5.00
0.11
12°
MTC16rev4
Figure 8. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
6
© 2004 Fairchild Semiconductor Corporation
FSAV331 • Rev. 1.0.2
www.fairchildsemi.com
7
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
FSAV331MTCX 替代型号
型号 | 制造商 | 描述 | 替代类型 | 文档 |
FSAV331MTCX | FAIRCHILD | Dual-Channel, 4:1 Video Switch | 类似代替 | |
FSAV331MTC | FAIRCHILD | Dual 4:1 Wide Bandwidth Video Switch | 功能相似 |
FSAV331MTCX 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
FSAV331MTCX_10 | FAIRCHILD | Dual-Channel, 4:1 Video Switch | 获取价格 | |
FSAV331QSC | FAIRCHILD | Dual 4:1 Wide Bandwidth Video Switch | 获取价格 | |
FSAV331QSCX | FAIRCHILD | Video Multiplexer, 2 Func, 1 Channel, CMOS, PDSO16, 0.150 INCH, MO-137, QSOP-16 | 获取价格 | |
FSAV331_05 | FAIRCHILD | Dual Channel 4:1 Video Switch | 获取价格 | |
FSAV331_10 | FAIRCHILD | Dual-Channel, 4:1 Video Switch | 获取价格 | |
FSAV332 | FAIRCHILD | Wide Bandwidth Video Switch | 获取价格 | |
FSAV332MTC | FAIRCHILD | Wide Bandwidth Video Switch | 获取价格 | |
FSAV332MTCX | FAIRCHILD | Quad Video Switch with Individual Enables | 获取价格 | |
FSAV332MTCX_NL | FAIRCHILD | SPST, 4 Func, 1 Channel, CMOS, PDSO14, 4.40 MM, LEAD FREE, MO-153, TSSOP-14 | 获取价格 | |
FSAV332MTC_NL | FAIRCHILD | Wide Bandwidth Video Switch | 获取价格 |
FSAV331MTCX 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6