FDU5N50NZTU [ONSEMI]
Power MOSFET, N-Channel, UniFETTM II, 500 V, 4 A, 1.5 Ω, IPAK;![FDU5N50NZTU](http://pdffile.icpdf.com/pdf2/p00363/img/icpdf/FDU5N50NZTU_2223413_icpdf.jpg)
型号: | FDU5N50NZTU |
厂家: | ![]() |
描述: | Power MOSFET, N-Channel, UniFETTM II, 500 V, 4 A, 1.5 Ω, IPAK 开关 脉冲 晶体管 |
文件: | 总9页 (文件大小:429K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
FDU5N50NZTU
Power MOSFET, N-Channel,
UniFETt II
500 V, 4 A, 1.5 W
UniFET II MOSFET is ON Semiconductor’s high voltage MOSFET
family based on advanced planar stripe and DMOS technology. This
advanced MOSFET family has the smallest on−state resistance among
the planar MOSFET, and also provides superior switching performance
and higher avalanche energy strength. In addition, internal
gate−source ESD diode allows UniFET II MOSFET to withstand over
2 kV HBM surge stress. This device family is suitable for switching
power converter applications such as power factor correction (PFC),
flat panel display (FPD) TV power, ATX and electronic lamp ballasts.
www.onsemi.com
D
G
Features
S
• R
= 1.38 ꢀ (Typ.) @ V = 10 V, I = 2 A
GS D
DS(on)
• Low Gate Charge (Typ. 9 nC)
• Low C (Typ. 4 pF)
rss
• 100% Avalanche Tested
• Improved dv/dt Capability
• ESD Improved Capability
• These Devices are Pb−Free and are RoHS Compliant
Applications
IPAK3
CASE 369AR
• LCD / LED TV
• Lighting
• Charger / Adapter
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2018
1
Publication Order Number:
May, 2019 − Rev. 1
FDU5N50NZTU/D
FDU5N50NZTU
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
C
Symbol
Parameter
Value
Unit
V
V
DSS
V
GSS
Drain−to−Source Voltage
Gate−to−Source Voltage
Drain Current
500
25
V
I
D
Continuous (T = 25°C)
4
A
C
Continuous (T = 100°C)
2.4
C
I
I
Drain Current
Pulsed (Note 1)
16
A
mJ
A
DM
E
AS
Single Pulse Avalanche Energy (Note 2)
Avalanche Current (Note 1)
304
4
AR
E
Repetitive Avalanche Energy (Note 1)
Peak Diode Recovery (Note 3)
Power Dissipation
6.2
mJ
V/ns
W
AR
dv/dt
10
62
P
T = 25°C
C
D
Derate Above 25°C
0.5
W/°C
°C
T , T
Operating and Storage Temperature Range
−55 to +150
300
J
STG
T
L
Maximum Lead Temperature for Soldering Purposes (1/8″ from case for 5 seconds)
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Repetitive Rating: Pulse width limited by maximum junction temperature.
2. I = 4 A, V = 50 V, L = 38 mH, R = 25 ꢀ, starting T = 25°C.
AS
DD
G
DSS
J
3. I ≤ 4 A, di/dt ≤ 200 A/ꢁ s, V ≤ BV
, Starting T = 25°C.
SD
DD
J
THERMAL CHARACTERISTICS
Symbol
Parameter
Value
2.0
Unit
Thermal Resistance, Junction−to−Case
Thermal Resistance, Junction−to−Ambient
°C/W
R
ꢂ
JC
JA
R
90
ꢂ
PACKAGE MARKING AND ORDERING INFORMATION
Part Number
Top Mark
Package
Packing Method
Reel Size
Tape Width
Quantity
FDU5N50NZTU
FDU5N50NZ
IPAK
Tube
N/A
N/A
75 units
www.onsemi.com
2
FDU5N50NZTU
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise specified)
C
Symbol
Parameter
Test Condition
Min
Typ
Max
Unit
OFF CHARACTERISTICS
BV
Drain−to−Source Breakdown Voltage
I
D
= 250 ꢁ A, V = 0 V, T = 25°C
500
V
DSS
GS
J
ꢃ BV
/
ꢃ T
Breakdown Voltage Temperature
Coefficient
I
D
= 250 ꢁ A, Referenced to 25°C
0.5
V/°C
DSS
J
I
Zero Gate Voltage Drain Current
V
= 500 V, V = 0 V
1
ꢁ A
ꢁ A
DSS
DS
GS
V
DS
= 400 V, T = 125°C
10
10
C
I
Gate−to−Body Leakage Current
V
GS
= 25 V, V = 0 V
DS
GSS
ON CHARACTERISTICS
V
Gate Threshold Voltage
V
= V , I = 250 ꢁ A
3.0
5.0
1.5
V
ꢀ
S
GS(th)
DS(on)
GS
DS
D
R
Static Drain−to−Source On Resistance
Forward Transconductance
V
V
= 10 V, I = 2 A
1.38
3.54
GS
DS
D
g
FS
= 20 V, I = 2 A
D
DYNAMIC CHARACTERISTICS
C
Input Capacitance
V
DS
= 25 V, V = 0 V, f = 1 MHz
330
50
4
440
70
6
pF
nC
iss
GS
C
Output Capacitance
oss
C
Reverse Transfer Capacitance
Total Gate Charge at 10 V
Gate−to−Source Gate Charge
Gate−to−Drain “Miller” Charge
rss
Q
V
DS
= 400 V, I = 4 A,
9
12
g(tot)
D
V
GS
= 10 V (Note 4)
Q
2
gs
Q
4
gd
SWITCHING CHARACTERISTICS
t
Turn−On Delay Time
Turn−On Rise Time
Turn−Off Delay Time
Turn−Off Fall Time
V
= 250 V, I = 4 A,
12
22
28
21
35
55
65
50
ns
d(on)
DD
D
V
GS
= 10 V, R = 25 ꢀ (Note 4)
G
t
r
t
d(off)
t
f
DRAIN−SOURCE DIODE CHARACTERISTICS
I
Maximum Continuous Drain to Source Diode Forward Current
Maximum Pulsed Drain to Source Diode Forward Current
4
A
S
I
16
1.4
SM
V
SD
Drain to Source Diode Forward Voltage
Reverse Recovery Time
V
= 0 V, I = 4 A
V
GS
SD
t
rr
V
GS
= 0 V, I = 4 A,
dI /dt = 100 A/ꢁ s
210
1.1
ns
ꢁ C
SD
F
Q
Reverse Recovery Charge
rr
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Essentially independent of Operating Temperature Typical Characteristics.
www.onsemi.com
3
FDU5N50NZTU
TYPICAL CHARACTERISTICS
Figure 1. On−Region Characteristics
Figure 2. Transfer Characteristics
Figure 3. On−Resistance Variation vs. Drain
Figure 4. Body Diode Forward Voltage
Current and Gate Voltage
Variation vs. Source Current and Temperature
Figure 5. Capacitance Characteristics
Figure 6. Gate Charge Characteristics
www.onsemi.com
4
FDU5N50NZTU
TYPICAL CHARACTERISTICS
Figure 7. Breakdown Voltage Variation vs.
Figure 8. On−Resistance Variation vs.
Temperature
Temperature
Figure 9. Maximum Safe Operating Area vs.
Case Temperature
Figure 10. Maximum Drain Current
PDM
t1
t2
Figure 11. Transient Thermal Response Curve
www.onsemi.com
5
FDU5N50NZTU
Figure 12. Gate Charge Test Circuit & Waveform
Figure 13. Resistive Switching Test Circuit & Waveforms
Figure 14. Unclamped Inductive Switching Test Circuit & Waveforms
www.onsemi.com
6
FDU5N50NZTU
Figure 15. Peak Diode Recovery dv/dt Test Circuit & Waveforms
UniFET is a trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
www.onsemi.com
7
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
DPAK3 (IPAK)
CASE 369AR
ISSUE O
DATE 30 SEP 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13815G
DPAK3 (IPAK)
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00263/img/page/FDU6612A-NL_1587663_files/FDU6612A-NL_1587663_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00263/img/page/FDU6612A-NL_1587663_files/FDU6612A-NL_1587663_2.jpg)
FDU6612A_NL
Power Field-Effect Transistor, 9.5A I(D), 30V, 0.02ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-251AA, IPAK-3
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明