DF08S [ONSEMI]
1.5A桥式整流器;DATA SHEET
www.onsemi.com
Bridge Rectifiers
DF005S - DF10S
Description
With the ever−pressing need to improve power supply efficiency,
improve surge rating, improve reliability, and reduce size, the DFxS
family sets a standard in performance.
PDIP−4 GW
CASE 709AE
The design offers an surge rating of 50 A. This is important when
improving reliability and increasing efficiency. High efficiency
designs strive to reduce circuit resistance, which, unfortunately can
result in increased inrush surge. As such high surge current ratings can
be required to maintain or improve reliability.
̃
IN
+
OUT
The design also offers better efficiency by achieving a 1.5 A V of
F
̃
1.1 V maximum at 25°C. This lower V also supports cooler and more
SDIP
F
−
efficient operation.
Finally, the DFxS achieves all this in a SDIP surface mount form
factor, reducing board space and volumetric requirements vs.
competitive devices.
MARKING DIAGRAM
Features
2
2
• Maximum Surge Rating: I
= 50 A, I t = 10 A Sec
FSM
• Optimized V : Typical 0.94 V at 1.5 A, 25°C
F
• Glass Passivated Junctions
ON
• Lead Free Compliant to EU RoHS 2002/95/EU Directives
• Green Molding Compound: IEC61249
• Qualified with IR Reflow and Wave Soldering
• UL Certified, UL #E258596
ZXYY
DF06M
Z
X
YY
= Subcon Assembly Plant Code
= Last Digit of Calendar Year
= Weekly Payweek Date code
DFXXXM = Specific Device Number
xxx = 01, 02, 04, 06, 08, 10, or 005
ORDERING INFORMATION
See detailed ordering and shipping information on page 4 of
this data sheet.
© Semiconductor Components Industries, LLC, 2013
1
Publication Order Number:
March, 2022 − Rev 2
DF10S/D
DF005S − DF10S
ABSOLUTE MAXIMUM RATINGS (Note 3) Values are at T = 25°C unless otherwise noted.
A
Value
DF005S DF01S DF02S DF04S DF06S DF08S DF10S
Symbol
Parameter
Unit
V
V
V
Maximum Repetitive Reverse Voltage
Maximum RMS Bridge Input Voltage
DC Reverse Voltage at Rated IR
50
35
50
100
70
200
140
200
400
280
400
1.5
50
600
420
600
800
560
800
1000
700
RRM
V
RMS
V
DC
100
1000
V
I
Average Rectified Forward Current at TA = 40°C
A
F(AV)
I
Non−Repetitive Peak Forward Surge Current
8.3 ms Single Half−Sine Wave
A
FSM
T
Storage Temperature Range
−55 to +150
−55 to +150
°C
°C
STG
T
J
Operating Junction Temperature
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS Values are at T = 25°C unless otherwise noted.
A
Symbol
Parameter
Value
3.1
Unit
W
P
D
Power Dissipation
R
Thermal Resistance,
Junction−to−Ambient
Single−Die Measurement (Note 1)
(Maximum Land Pattern: 13 x 13 mm)
62
°C/W
θ
JA
Multi−Die Measurement (Note 2)
50
105
27
(Maximum Land Pattern: 13 x 13 mm)
Multi−Die Measurement (Note 2)
(Minimum Land Pattern: 1.3 x 1.5 mm)
ψ
Thermal Characterization
Parameter, Junction to Lead (Maximum and Minimum Land Pattern)
Single−Die Measurement (Note 2)
°C/W
JL
1. Device mounted on PCB with 0.5 inch x 0.5 inch (13 mm x 13 mm). Minimum Pads of 2 oz Copper.
2. The thermal resistances (R
& ψ ) are characterized with the device mounted on the following FR4 printed circuit boards, as shown in
θ
JA
JL
Figure 1 and Figure 2. PCB size: 76.2 x 114.3 mm. Heating effect from adjacent dice is considered and only tow dices are powered at the
same time.
F
S
F
S
S
S
F
F
Figure 1. Maximum pads of 2 oz copper
ELECTRICAL CHARACTERISTICS
Figure 2. Minimun pads of 2 oz copper
Values are at T = 25°C unless otherwise noted.
A
Symbol
Parameter
Forward Voltage, per Element
Conditions
I = 1.5 A
Min.
−
Typ.
−
Max.
1.1
5.0
500
10
Unit
V
V
F
F
I
R
Reverse Current, per Element at Rated V
T = 25°C
A
−
−
mA
R
T = 125_C
−
−
A
2
2
I t
Rating for Fusing (t < 8.35 ms)
Typical Capacitance, per Leg
−
−
−
A s
C
V
= 4.0 V,
−
25
−
pF
J
R
f = 1.0 MHz
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
2
DF005S − DF10S
TYPICAL CHARACTERISTICS
1.5
50
40
1
30
20
10
0
0.5
Based on R , per Leg
q
JA
0
1
2
5
10
20
50
100
20
40
60
80
100
120
140 160
Number of Cycles at 60 Hz
Ambient Temperature [5C]
Figure 3. Non−Repetitive Surge Current
Figure 4. Forward Current Derating Curve
100
10
1
10
1
T =125°C
J
T =150°C
J
T = 150°C
J
T =25°C
J
0.1
0.01
0.1
T = 25°C
J
T = 125°C
J
T =−55°C
J
T =−55°C
J
0.01
0.001
0.2 0.3 0.4 0.5
0.6 0.7 0.8 0.9 1.0 1.1 1.2
500
200
300
400
600
700 800
900 1000
Forward Voltage Drop, V [V]
Reverse Voltage Drop, V [V]
R
F
Figure 5. Forward Voltage Characteristics
Figure 6. Reverse Current vs. Reverse Voltage
www.onsemi.com
3
DF005S − DF10S
ORDERING INFORMATION
Product Number
†
Device Code Marking
Package
Shipping
DF005S
DF01S
DF02S
DF04S
DF06S
DF08S
DF10S
DF005S
DF01S
DF02S
DF04S
DF06S
DF08S
DF10S
PDIP−4, GW
1500 / Tape and Reel
1500 / Tape and Reel
1500 / Tape and Reel
1500 / Tape and Reel
1500 / Tape and Reel
1500 / Tape and Reel
1500 / Tape and Reel
(Pb−Free, Halide Free)
PDIP−4, GW
(Pb−Free, Halide Free)
PDIP−4, GW
(Pb−Free, Halide Free)
PDIP−4 GW
(Pb−Free, Halide Free)
PDIP−4, GW
(Pb−Free, Halide Free)
PDIP−4, GW
(Pb−Free, Halide Free)
PDIP−4, GW
(Pb−Free, Halide Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
PDIP4 GW
CASE 709AE
ISSUE O
DATE 31 JUL 2016
5.200
5.000
1.30
4
3
1.50
PIN1 ID
OPTIONAL
10.300
9.400
6.500
6.200
10.40
1
2
1.200
0.890
5.10
TOP VIEW
LAND PATTERN RECOMMENDATION
8.510
8.050
7.874
7.370
CHAMFER
OPTIONAL
2.60
2.20
0.330
0.220
0.330
0.076
1.530
1.020
1.12
SIDE VIEW
END VIEW
NOTES:
A. THIS PACKAGE DOES NOT CONFORM TO
ANY REFERENCE STANDARD.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13473G
PDIP4 GW
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2016
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
©2020 ICPDF网 联系我们和版权申明